N78 unable to listen the ring back tone

Every body
here in indonesia we've got a problem with nokia N78. we can't listen to the ring back tone if it started with dual mode.....and if we set the network in GSM network then it will be normally....why this could be happen ???? the software version is 10.136 ???

Ol Ringback Tones use to use them Many Moons ago! b

Similar Messages

How to change the ring back tone?????

I can't figure out how to change the ringback tone........classical is not my genre.

Ol Ringback Tones use to use them Many Moons ago! b

I want to purchase a ring back tone but....

When I go to purchase a ring back tone only, it is bundling it with a ring tone for a price of 4.98. How do I just get a ring back tone???

cwmom,
Ringback are always fun and certainly enhance the experience on your wireless device! What phone do you have? Which ringback tone are you interested in purchasing? Povided below is a link to our website with step by step direction that will walk you through this process http://bit.ly/LSl3gA.
Thank you,
GeorgeP_VZW
Follow us on Twitter @VZWSupport

Write Back Error The system is unable to read the Write Back Template 'test

Write Back Error The system is unable to read the Write Back Template 'test'. Please contact your system administrator. OK
But, the update button is on.
It did work and now it doesn't... nothing of course that we know of has changed. We got this message when we started and the name of the file was what we put as template name in obiee instead of webmessage name but the update button was off.... now we have update button on and same error.
File is on unix and we have made 777 so it's open to the world.
<?xml version="1.0" encoding="utf-8"?>
<WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1">
<WebMessageTable lang="en-us" system="WriteBack" table="D_EXEC_METRIC">
<WebMessage name="test">
<XML>
<writeBack connectionPool="writeback">
<update>UPDATE D_EXEC_METRIC SET EXEC_METRIC_ICON_WID = @{c3}, EXEC_METRIC_COMMENT='@{c7}' WHERE SECTOR_WID=@{c0} AND EXEC_METRIC_WID=@{c2}</update>
</writeBack>
</XML>
</WebMessage>
</WebMessageTable>
</WebMessageTables>
thanks in advance for your help!

You're better off searching for an answer to this question in the [OBIEE Forum|http://forums.oracle.com/forums/forum.jspa?forumID=378].
The topic is discussed at least twice a month so there's tons of posts with all the answers you need. Make a forum search for writeback and you'll have your answer.
Cheers,
C.

Why I am unable to adjust the ringer volume by the side buttons and there is no ringer with the Mute button OFF

With the mute switch OFF - I am unable to adjust the ringer volume by the side buttons.
When someone calls/texts there is no sound coming from the speaker.
The headphone jack works when I listen to the Ipod and the speaker works when I change the ringer volume through settings. So i know that the speaker does work
Headphone jack seems clean and dust free
I heard that there may be a Skype issue than can control the speaker volume - so i deleted it but i still cannot get any sound from regular functions.
When I play the Ipod through the speaker with no headphones there is no option to change the volume and no sound.
If it works when i go through settings to set my ring volume, my ringtone plays - then why does it not work otherwise?

I have Iphone4s 16GB, IOS7.0.4 updates having a problem , that when i press + or - volume keys while my iphone is ringing my iphone 4s goes silent .
Whereas you know silent key is used to make the ringing phone silent. This button is working ok while only problem is my iphone goes silent while pressing + or - volume keys as these keys should increase / lower the ringing volume . These keys were ok working in IOS 6.
Where as these keys are also working ok in music player of iphone for IOS 7, the only problem is for ringing.

Ring back tones

I just bought a ring back tone today but when I go to manage it, the web page is blank. What do I do to get my tone to my phone??

We would love to help out today angeleyes3110. Are you attempting to access the webpage via your mobile device? In order to manage/activate your new ringback tone you will need to access the site via home computer. Please keep us posted if you continue to have issues, thanks!
MatthewS_VZW
Follow us on Twitter @VZWSUPPORT

How do i install ring back tone on my i phone 5s

can some one help me get ring back tones on my i phone 5s

IF these were iTunes ring tones and you could not get them back, there was a back in the iOS 8 upgrade. This is restored in iOS 8.1.2. If you have not upgraded yet to 8.1.2 you should do that.

No ringing back tone from PSTN (SIP trunk) via CUBE

Hello,
I have an issue about ringing back tone when I call from outside --> PSTN (SIP trunk) --> CUBE --> UCCX --> redirect call to extension. I hear IVR and can do DTMF. then press extension, no ringing back tone.
However when I call from PSTN (SIP trunk) --> CUBE --> DID (direct to IP Phone). I heard ringing back tone.
Call from inside to outside, I heard ringing back tone.
I connect cucm to cube by create H.323 gateway.
cucm 10.x
uccx 10.x
cube (cisco 2901) Version 15.2(4)M5
Please help
Thank you

Can you try changing theg Service Parameter"Send H225 User Info Msg" parameter and set it to "Use ANN for ringback" and see if it helps pls?
Also make sure you have Annunciators registered and available in the MRGL assigned to H.323 Gateway.
It is clusterwide parameter and hence applies to all node in the cluster.

No Ring Back Tone after receiving 180/183(SDP) wo RTP

Hi,
I would like to ask how CUCM decides about which Ring Back Tone (Remote/Local/nothing) should be played?
There is a problem wisth 180/183 Message with SDP but without RTP. When CUCM receives that message, no Ring Back Tone is played. (CUCM 8.6 was used)
What's more:
1. When Ipphone receives 183(SDP) - remote device is sending RTP stream and later ipphone receives 180 (no SDP) -> Ipphone does not switch to play local RBT.
2. But when Ipphone receives 180(no SDP) and later Ipphone receives 183 (SDP) with RTP -> IPphone switches to play remote RBT.
Thanks for any help.
Marta

What is the PBX? Check if the PBX and version is on the Microsoft Interoperability Program (Supported or Qualified): http://technet.microsoft.com/en-us/office/dn788945 If listed,
there should be configuration notes or a deployment document.
If not listed, you might need to deploy a gateway between Lync and the PBX to resolve any interop issues.
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator - Used to assist in the validation and documentation of Lync Server 2013.

18 sec silent between dialing digits and ring back tone

We have VoIP setup that connect branch offices through the head office PBX .(calls cross the E1 link twice that connect 3662 & PBX).
When call progress between two 1751 2V, there is a 18 second silent between dialing digits and getting ring back tone.
This seems not to be happened between 1750 2v.
Can anybody give me a suggestion to decrease this delay or add some tone to this silent period?
Thanks

debug for 1751 part 1
*Mar 1 00:04:20.935: cc_api_call_setup_ind (vdbPtr=0x819546C8, callInfo={called=,called_oct3=0x81,calling=,calling_oct3=0x0,calling_oct3a=0x0,calling_xlated=false,subscriber_type_str=RegularLine,fdest=0,peer_tag=1, prog_ind=3,callingIE_present 0},callID=0x81918E30)
*Mar 1 00:04:20.935: cc_api_call_setup_ind calling number is null, answer addr dest pattern 6030 e164_ans_addr 0 e164_dest_pattern 1
*Mar 1 00:04:20.935: cc_api_call_setup_ind valid dest pattern, copying 6030 to calling number
*Mar 1 00:04:20.935: cc_api_call_setup_ind type 3 , prot 0
*Mar 1 00:04:20.935: cc_insert_call_entry: Increment call volume counter
*Mar 1 00:04:20.935: cc_insert_call_entry: current call volume: 1
*Mar 1 00:04:20.935: cc_insert_call_entry: entry's incoming TRUE. is_incoming is TRUE
*Mar 1 00:04:20.939: cc_incr_if_call_volume: not the VoIP or MMoIP
*Mar 1 00:04:20.939: cc_process_call_setup_ind (event=0x8193FBF4)
*Mar 1 00:04:20.939: >>>>CCAPI handed cid 2 with tag 1 to app "DEFAULT"
*Mar 1 00:04:20.939: sess_appl: ev(24=CC_EV_CALL_SETUP_IND), cid(2), disp(0)
*Mar 1 00:04:20.943: sess_appl: ev(SSA_EV_CALL_SETUP_IND), cid(2), disp(0)
*Mar 1 00:04:20.943: ssaCallSetupInd
*Mar 1 00:04:20.943: ccCallSetContext (callID=0x2, context=0x81853F50)
*Mar 1 00:04:20.943: ssaCallSetupInd cid(2), st(SSA_CS_MAPPING),oldst(0), ev(24)ev->e.evCallSetupInd.nCallInfo.finalDestFlag = 0
*Mar 1 00:04:20.943: ccCallSetupAck (callID=0x2)
*Mar 1 00:04:20.943: cc_api_set_transfer_info: (transfer= 0, callID=0x2)
*Mar 1 00:04:20.943: cc_api_set_transfer_info: call transfer reset)
*Mar 1 00:04:20.943: ccGenerateToneInfo (callID=0x2 tone=8)
*Mar 1 00:04:20.943: ccCallReportDigits (callID=0x2, enable=0x1)
*Mar 1 00:04:20.943: cc_api_call_report_digits_done (vdbPtr=0x819546C8, callID=0x2, disp=0)
*Mar 1 00:04:20.943: sess_appl: ev(52=CC_EV_CALL_REPORT_DIGITS_DONE), cid(2), disp(0)
*Mar 1 00:04:20.943: cid(2)st(SSA_CS_MAPPING)ev(SSA_EV_CALL_REPORT_DIGITS_DONE)
oldst(SSA_CS_MAPPING)cfid(-1)csize(0)in(1)fDest(0)
*Mar 1 00:04:20.947: ssaReportDigitsDone cid(2) peer list: (empty)
*Mar 1 00:04:20.947: ssaReportDigitsDone callid=2 Enable succeeded
*Mar 1 00:04:20.947: ccGenerateToneInfo (callID=0x2 tone=8)
*Mar 1 00:04:22.883: cc_api_call_digit_begin (dstVdbPtr=0x0, dstCallId=0xFFFFFFFF, srcCallId=0x2,
digit=1, digit_begin_flags=0x1, rtp_timestamp=0xEE81E9A3
rtp_expiration=0x0, dest_mask=0x1)
*Mar 1 00:04:22.887: sess_appl: ev(10=CC_EV_CALL_DIGIT_BEGIN), cid(2), disp(0)
*Mar 1 00:04:22.887: cid(2)st(SSA_CS_MAPPING)ev(SSA_EV_DIGIT_BEGIN)
oldst(SSA_CS_MAPPING)cfid(-1)csize(0)in(1)fDest(0)
*Mar 1 00:04:22.887: ssaIgnore cid(2), st(SSA_CS_MAPPING),oldst(0), ev(10)
*Mar 1 00:04:22.963: cc_api_call_digit_end (dstVdbPtr=0x0, dstCallId=0xFFFFFFFF, srcCallId=0x2,
digit=1,duration=115,xruleCallingTag=0,xruleCalledTag=0, dest_mask=0x1), digit_tone_mode=0
*Mar 1 00:04:22.963: sess_appl: ev(9=CC_EV_CALL_DIGIT_END), cid(2), disp(0)
*Mar 1 00:04:22.967: cid(2)st(SSA_CS_MAPPING)ev(SSA_EV_CALL_DIGIT)
oldst(SSA_CS_MAPPING)cfid(-1)csize(0)in(1)fDest(0)
*Mar 1 00:04:22.967: ssaDigit
*Mar 1 00:04:22.967: ssaDigit, 0. sct->digit , sct->digit len 0, usrDigit 1, digit_tone_mode=0
*Mar 1 00:04:22.967: ssaDigit,1. callinfo.called , digit 1, callinfo.calling 6030, xrulecallingtag 0, xrulecalledtag 0
*Mar 1 00:04:22.967: ssaDigit, 7. callinfo.calling 6030, sct->digit 1, result 1
*Mar 1 00:04:23.095: cc_api_call_digit_begin (dstVdbPtr=0x0, dstCallId=0xFFFFFFFF, srcCallId=0x2,
digit=1, digit_begin_flags=0x1, rtp_timestamp=0xEE81E9A3
rtp_expiration=0x0, dest_mask=0x1)
*Mar 1 00:04:23.095: sess_appl: ev(10=CC_EV_CALL_DIGIT_BEGIN), cid(2), disp(0)
*Mar 1 00:04:23.095: cid(2)st(SSA_CS_MAPPING)ev(SSA_EV_DIGIT_BEGIN)
oldst(SSA_CS_MAPPING)cfid(-1)csize(0)in(1)fDest(0)
*Mar 1 00:04:23.095: ssaIgnore cid(2), st(SSA_CS_MAPPING),oldst(0), ev(10)
*Mar 1 00:04:23.175: cc_api_call_digit_end (dstVdbPtr=0x0, dstCallId=0xFFFFFFFF, srcCallId=0x2,
digit=1,duration=115,xruleCallingTag=0,xruleCalledTag=0, dest_mask=0x1), digit_tone_mode=0
*Mar 1 00:04:23.175: sess_appl: ev(9=CC_EV_CALL_DIGIT_END), cid(2), disp(0)
*Mar 1 00:04:23.175: cid(2)st(SSA_CS_MAPPING)ev(SSA_EV_CALL_DIGIT)
oldst(SSA_CS_MAPPING)cfid(-1)csize(0)in(1)fDest(0)
*Mar 1 00:04:23.175: ssaDigit
*Mar 1 00:04:23.175: ssaDigit, 0. sct->digit 1, sct->digit len 1, usrDigit 1, digit_tone_mode=0
*Mar 1 00:04:23.175: ssaDigit,1. callinfo.called , digit 11, callinfo.calling 6030, xrulecallingtag 0, xrulecalledtag 0
*Mar 1 00:04:23.175: ssaDigit, 7. callinfo.calling 6030, sct->digit 11, result 1
*Mar 1 00:04:23.443: cc_api_call_digit_begin (dstVdbPtr=0x0, dstCallId=0xFFFFFFFF, srcCallId=0x2,
digit=7, digit_begin_flags=0x1, rtp_timestamp=0xEE81E9A3
rtp_expiration=0x0, dest_mask=0x1)
*Mar 1 00:04:23.447: sess_appl: ev(10=CC_EV_CALL_DIGIT_BEGIN), cid(2), disp(0)
*Mar 1 00:04:23.447: cid(2)st(SSA_CS_MAPPING)ev(SSA_EV_DIGIT_BEGIN)
oldst(SSA_CS_MAPPING)cfid(-1)csize(0)in(1)fDest(0)
*Mar 1 00:04:23.447: ssaIgnore cid(2), st(SSA_CS_MAPPING),oldst(0), ev(10)
*Mar 1 00:04:23.523: cc_api_call_digit_end (dstVdbPtr=0x0, dstCallId=0xFFFFFFFF, srcCallId=0x2,
digit=7,duration=115,xruleCallingTag=0,xruleCalledTag=0, dest_mask=0x1), digit_tone_mode=0
*Mar 1 00:04:23.523: sess_appl: ev(9=CC_EV_CALL_DIGIT_END), cid(2), disp(0)
*Mar 1 00:04:23.527: cid(2)st(SSA_CS_MAPPING)ev(SSA_EV_CALL_DIGIT)
oldst(SSA_CS_MAPPING)cfid(-1)csize(0)in(1)fDest(0)
*Mar 1 00:04:23.527: ssaDigit
*Mar 1 00:04:23.527: ssaDigit, 0. sct->digit 11, sct->digit len 2, usrDigit 7, digit_tone_mode=0
*Mar 1 00:04:23.527: ssaDigit,1. callinfo.called , digit 117, callinfo.calling 6030, xrulecallingtag 0, xrulecalledtag 0
*Mar 1 00:04:23.527: ssaDigit, 7. callinfo.calling 6030, sct->digit 117, result 1
*Mar 1 00:04:23.855: cc_api_call_digit_begin (dstVdbPtr=0x0, dstCallId=0xFFFFFFFF, srcCallId=0x2,
digit=9, digit_begin_flags=0x1, rtp_timestamp=0xEE81E9A3
rtp_expiration=0x0, dest_mask=0x1)
*Mar 1 00:04:23.855: sess_appl: ev(10=CC_EV_CALL_DIGIT_BEGIN), cid(2), disp(0)
*Mar 1 00:04:23.855: cid(2)st(SSA_CS_MAPPING)ev(SSA_EV_DIGIT_BEGIN)
oldst(SSA_CS_MAPPING)cfid(-1)csize(0)in(1)fDest(0)
*Mar 1 00:04:23.855: ssaIgnore cid(2), st(SSA_CS_MAPPING),oldst(0), ev(10)
*Mar 1 00:04:23.955: cc_api_call_digit_end (dstVdbPtr=0x0, dstCallId=0xFFFFFFFF, srcCallId=0x2,
digit=9,duration=135,xruleCallingTag=0,xruleCalledTag=0, dest_mask=0x1), digit_tone_mode=0
*Mar 1 00:04:23.955: sess_appl: ev(9=CC_EV_CALL_DIGIT_END), cid(2), disp(0)
*Mar 1 00:04:23.955: cid(2)st(SSA_CS_MAPPING)ev(SSA_EV_CALL_DIGIT)
oldst(SSA_CS_MAPPING)cfid(-1)csize(0)in(1)fDest(0)
*Mar 1 00:04:23.955: ssaDigit
*Mar 1 00:04:23.955: ssaDigit, 0. sct->digit 117, sct->digit len 3, usrDigit 9, digit_tone_mode=0
*Mar 1 00:04:23.959: ssaDigit,1. callinfo.called , digit 1179, callinfo.calling 6030, xrulecallingtag 0, xrulecalledtag 0
*Mar 1 00:04:23.959: ssaDigit, 7. callinfo.calling 6030, sct->digit 1179, result 0
*Mar 1 00:04:23.959: ccCallReportDigits (callID=0x2, enable=0x0)
*Mar 1 00:04:23.959: cc_api_call_report_digits_done (vdbPtr=0x819546C8, callID=0x2, disp=0)
*Mar 1 00:04:23.959: ssaSetupPeer cid(2) peer list: tag(3) called number (1179)
*Mar 1 00:04:23.959: ssaSetupPeer cid(2), destPat(1179), matched(1), prefix(), peer(8191BA0C), peer->encapType (2)
*Mar 1 00:04:23.959: ccCallProceeding (callID=0x2, prog_ind=0x0)
*Mar 1 00:04:23.959: ccCallSetupRequest (Inbound call = 0x2, outbound peer =3, dest=, params=0x8194FDE0 mode=0, *callID=0x81950210, prog_ind = 3) callingIE_present 0
*Mar 1 00:04:23.959: ccCallSetupRequest numbering_type 0x81
*Mar 1 00:04:23.963: ccCallSetupRequest encapType 2 clid_restrict_disable 1 null_orig_clg 1 clid_transparent 0 callingNumber 6030
*Mar 1 00:04:23.963: dest pattern 1..., called 1179, digit_strip 0
*Mar 1 00:04:23.963: callingNumber=6030, calledNumber=1179, redirectNumber= display_info= calling_oct3a=0
*Mar 1 00:04:23.963: accountNumber=, finalDestFlag=0,
guid=2354.2999.14ef.11cc.8008.bb84.44aa.06a5
*Mar 1 00:04:23.963: peer_tag=3
*Mar 1 00:04:23.963: ccIFCallSetupRequestPrivate: (vdbPtr=0x818A8AE0, dest=, callParams={called=1179,called_oct3=0x81, calling=6030,calling_oct3=0x0, calling_xlated=false, subscriber_type_str=RegularLine, fdest=0, voice_peer_tag=3},mode=0x0) vdbPtr type = 1
*Mar 1 00:04:23.963: ccIFCallSetupRequestPrivate: (vdbPtr=0x818A8AE0, dest=, callParams={called=1179, called_oct3 0x81, calling=6030,calling_oct3 0x0, calling_xlated=false, fdest=0, voice_peer_tag=3}, mode=0x0, xltrc=-5)
*Mar 1 00:04:23.963: cc_insert_call_entry: not incoming entry
*Mar 1 00:04:23.963: cc_insert_call_entry: entry's incoming FALSE. is_incoming is FALSE
*Mar 1 00:04:23.967: ccSaveDialpeerTag (callID=0x2, dialpeer_tag=0x3)
*Mar 1 00:04:23.967: ccCallSetContext (callID=0x3, context=0x81854A68)
*Mar 1 00:04:23.967: sess_appl: ev(52=CC_EV_CALL_REPORT_DIGITS_DONE), cid(2), disp(0)
*Mar 1 00:04:23.967: cid(2)st(SSA_CS_CALL_SETTING)ev(SSA_EV_CALL_REPORT_DIGITS_DONE)
oldst(SSA_CS_MAPPING)cfid(-1)csize(0)in(1)fDest(0)
*Mar 1 00:04:23.967: -cid2(3)st2(SSA_CS_CALL_SETTING)oldst2(SSA_CS_MAPPING)
*Mar 1 00:04:23.967: ssaReportDigitsDone cid(2) peer list: (empty)
*Mar 1 00:04:23.967: ssaReportDigitsDone callid=2 Reporting disabled.
*Mar 1 00:04:23.967: cc_api_supported_data data_mode=0x10002
*Mar 1 00:04:23.971: cc_incr_if_call_volume: remote IP is 192.168.10.210
*Mar 1 00:04:23.971: cc_incr_if_call_volume: hwidb is FastEthernet0/0
*Mar 1 00:04:23.971: cc_incr_if_call_volume: create entry in list: 1
*Mar 1 00:04:25.975: ccTDUtilGetInstanceCount: For tagID[1] of callID[3]
*Mar 1 00:04:25.975: ccTDPvtProfileTableObjectAccessManager: No profileTable set for callID[3]
*Mar 1 00:04:25.975: ccTDUtilGetInstanceCount: For tagID[2] of callID[3]

OBIEE Writeback error - The system is unable to read the Write Back Templat

Hi all,
I'm trying to set up the write back feature for one of the reports. All the set up up including XML file in the custommessage folder is done.Ensured the webmessage name tag value (pmet_update) is same as the one used in the report write back template value etc.
Also the server is restarted after the latest XML file(as shown below) is copied after all type of debugging with similar threads on this matter.
But when i click on the update button in the report (button is highlighted), i'm getting the error
"The system is unable to read the Write Back Template 'pmet_update'. Please contact your system administrator."
here is the xml.
<?xml version="1.0" encoding="utf-8"?>
<WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1">
<WebMessageTable lang="en-us" system="WriteBack" table="Messages">
<WebMessage name="pmet_update">
<XML>
<writeBack connectionPool="PMTCOG">
<insert></insert>
<update> UPDATE XREF_PMET_URL SET URL= '@{c1}' WHERE API='@{c0}'</update>
</writeBack>
</XML>
</WebMessage>
</WebMessageTable>
</WebMessageTables>
Could you please help?

Hi,
I think that you have to spacify also an SQL statement for the update tag, for example:
<?xml version="1.0" encoding="utf-8"?>
<WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1">
<WebMessageTable lang="en-us" system="WriteBack" table="Messages">
<WebMessage name="pmet_update">
<XML>
<writeBack connectionPool="PMTCOG">
<insert> select null from dual</insert>
<update> UPDATE XREF_PMET_URL SET URL= '@{c1}' WHERE API='@{c0}'</update>
</writeBack>
</XML>
</WebMessage>
</WebMessageTable>
</WebMessageTables>
The witeback wants for both the tags (<insert></insert> and <update></update>) an SQL Statement.
For me it works.
Let me know!
Gianluca Ancarani

10g - write back - The system is unable to read the Write Back Template

hi,experts,
I enabled write back on a report.
the button (write back) is enabled (not grey)
but when I click the button, there is a message
The system is unable to read the Write Back Template 'UPDATETESTWRITEBACK'. Please contact your system administrator.
I put UPDATETESTWRITEBACK.XML in C:\OracleBI\web\msgdb\customMessages
the syntax in the xml is correct.
what is the result? any log to check?

Its not mandatory to have the same template name as your xml file name.
But the <WebMessage name= "UPDATETESTWRITEBACK"> should be same what the templetae you are using in the webcat.
Please find sampel xml which can have any xyz name in the folder "OracleBIData\web\msgdb\customMessages'
<?xml version="1.0" encoding="utf-8" ?>
<WebMessageTables xmlns:sawm="com.siebel.analytics.web.messageSystem">
<WebMessageTable lang="en-us" system="WriteBackTemplates" table="Templates">
<WebMessage name= "ResourceAllocation">
<XML>
<writeBack connectionPool="--your connection pool name">
<insert> Insert statement </insert>
</writeBack>
</XML>
</WebMessage>
</WebMessageTable>
</WebMessageTables>
Cheers,
Rajeev A

I have iphone 6 plus. When i am connecting it to my Hyundai Grand i10 using Bluetooth and trying to call someone, unable to get the ringing sound. Sound comes only when the person receives a call.

I have iphone 6 plus (IOS 8.0.2). When i am connecting it to my Hyundai Grand i10 using Bluetooth and trying to call someone, unable to get the ringing sound. Sound comes only when the person receives a call.

Hello Mogulman46,
So what that means is when you have Do Not Disturb turned on, you may have an alert depending on the setting and how you are using your iPhone. So if it is set to Always, then that means that no matter what, your iPhone will not be notified. If it set to Only while the iPhone is locked, then that means that you will not get notification when your iPhone is locked but you will get notifications if your iPhone is being used. Also keep in mind the settings All Calls From can be set to certain contacts like Favorites, Everyone or no one. If you are using Do Not Disturb and you do not need it, then turn it off.
Use Do Not Disturb on your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht5463
Regards,
-Norm G.

Since I've updated to iOS 6 I am unable to use the next/back buttons from Headphone for audio book chapters.

Since I've updated from iOS 5 to iOS 6 I am unable to use the next/back buttons from Headphone for audio book chapters.
This is working fine for albums but are broken for audio books.
The back button refers always to the first chapter of the audio book (very annoying if you are in the middle of an audio book) and the nex button goes one level higher back to the selection of the audio book itself.
In iOS 5.0 it was still possible to navigate throught the audio book chapters using these buttons.
This still happens in iOS 6.1.
Is this a known bug?
Does any solution exist?
Thx,
Oliver

To gdgmacguy your a f****** idiot for one I'm having the same problem as pennymar. And you tell me to quit whinning. You got more problems then the iOS 6 you did not answer my question nor the other 13 or whatever you replied to within a 30 min time frame. You must got nothing better to do then to harass people and to pretend you know something about apple products. Which you don't from what I've read the other advices you should have gave to other people. But you didn't you replied a question back to the people asking a question. So if your not gonna use these community forums the right way don't use them at all.

Ring back tone

I need some HELP. I want to change my ring back tone from Christmas music but can't get it to do. FRUSTRATED!!

Thanks for your contribution, Ann154!
Don't worry, susus214, we're here to help change your ring back tone. Ann154, is correct. This can be done in My Verizon at vzw.com Once you sign in using your mobile number's credentials you can go to I Want To...> More Actions> Media> Manage Ringback Tones. I'm sure you'll find this information helpful. Have a good evening.
DaisyP_VZWSupport
Follow us on Twitter @VZWSupport

N78 unable to listen the ring back tone

Similar Messages

Maybe you are looking for