N79: Bugs from new 11.049 firmware updates

I open a new topic for everyone to post bugs after updating their N79 with 11.049 firmware:
1. In Photos - fonts appears Small even when font size is set to Large
2. Photos - Thumbnails appears to be pixelated. It sharpens up when you zoom in (even then it takes a while to appear sharp). Very noticeable with pics of alphabets or numbers. Turning the phone to landscape mode, the thumbnail pictures sharpens up immediately!
Nokia N79 8GB
SW Version: 11.049 RM-348

17-Jan-2009 06:00 PM
helge6300 wrote:
Does anybody else have this one: after upgrading from 10.046 to 11.049 my n79 doesn't store/remember the voice mailbox number anymore, it just seems to forget it after switching off or even when just entering the settings for the voice mailbox number - i have to re-enter the number again and again.
Didn't have this problem with 10.046...
I have exactly the same problem.

Similar Messages

  • Any news in N80 firmware updates?

    It seems very quiet lately
    Any news on N80 firmware updates?
    A version better than v4.0707.0.7
    Im getting sick in waiting
    The service command bug is really irritating

    hi guys , am disappointed too ! lets kill some time imagining what will the new firmware contain lol
    i have many suggestions many of it is stuped
    1. i wish i can remove the 2 shortcuts (horisantal ) wich is : 1.wireless scanning + 2. calender , if there exisit some option to display/remove display of them
    2. if there is a way to remove the themes painlessly
    3. i want my special files pics/videos etc not to be displayed in the gallary that contain all multimedia files ( even though what i put in a seperate folder ) if i can check what folders only to be displayed in galary
    4. optional autolock with each slide closing
    5.simple way to connect the internet using wifi because sometimes am already connected using some wifi connection and when browsing it says ( connection needed ) but am already connected , make it unified
    6.when i close some page in the net browsing it close the connection automatically , make this optional not mandatory
    i got much much more lol i know it sounds silly , but these aint hard things and dont affect other customer because its all optional lol , and ah !
    7. i have 2 GB miniSD so make the sound recorder record more than one minute depending on the memory size
    8. optional call ending each slide closing
    9. if installed themes/application can be copied/sent via bluetooth or sth ..
    thanx lol common guys kill some time with expressin your needs in the new firmware PPPPPMessage Edited by mohsh86 on 13-Jun-200702:40 AM
    Message Edited by mohsh86 on 13-Jun-200702:42 AM

  • What is apple doing to fix the bugs from IOS 7.1.2 update? this update has ruined my phone

    What is Apple doing to fix the bugs from IOS 7.1.2 update??? This update has ruined my phone! Why would you put out a update you know is going to ruin someones phone? Whats being done? I have tried everything to fix my phone which was just fine before Apples IOS 7.1.2 update!!!

    I have also experienced issues with my iphone5 since updating to ios 7.1.2, prior to this update my phone was working perfectly fine and I know I didnt cause any damage to the phone because I baby my iphone as if it was my child. Ever since I updated to 7.1.2 my phone shutts itself down while I am using it, it can be while using whatsapp, browsing the internet or using apps, more than anything it fails while using the internet. The screen will either start to flicker or vertical lines will pop up and then the phone will fade to black, after this happens the phone will get really hot and to turn it back on I have to wait 5-10 minutes and hold down the power and home keys at the same time for about 15 seconds for it to turn back on, I have to wait 5-10 minutes because if I dont when I boot it back up it immediately shutts down again. This is a constant all day thing and for now i get by just making phone calls and sending regular text but I try to keep the action down to a minimum to prevent missing a phone call. I tried clearing the phone and rebooting it to original setting but this didnt fix it. After reading and speaking with several techs they tell me that ios 7.1.2 rolled out some performance adjustments one particular that affects the amp levels that the battery works at and supposedly the iphone 5 cant handle it, they explained that the phone for certain activities is asking for more or less power and the phone panics into safe mode and shutts itself down. My battery life is fine so I havent changed the battery like someone had suggested. In the diagnostic data it gives a panic.ips error. Id really like to know if there is any possible way to roll back to 7.1.1 through jailbreak or any other way, I was perfectly happy with this phone and didnt plan on buying another one for atleast 1-2 more years. If anyone can help me out this would be greatly appreciated, if not I hope apple is working to fix this.

  • New Nokia N80 Firmware update available via NSU (v...

    There is a new N80 Firmware Update Available --> version 5.0725.0.1 APAC !! Product Code: 0527591
    Waiting for EMEA firmware!
    Nokia 5320 XM Red v4.13

    The software version is dependent on the product code, so if you are told that you have the no update is available then you have the latest SW version for your product code.
    Apart from the fact that product codes are usually unique to a country (and in some cases to a network operator), you shouldn't have any issues regarding your region.

  • Can't install new MacBook EFI Firmware Update 1.2

    Hi all. I've tried to update to the newly released MacBook EFI Firmware Update 1.2, but when I go to run it, it says that my MacBook doesn't need updating. I know that I'm on the older 1.0 Firmware with Boot ROM Version MB21.00A5.B07. Any guesses as to why this new update won't run on my MacBook? It's supposed to be for all versions. Thanks for your help.
    --Eric

    enelson76 wrote:
    Hi all. I've tried to update to the newly released MacBook EFI Firmware Update 1.2, but when I go to run it, it says that my MacBook doesn't need updating. I know that I'm on the older 1.0 Firmware with Boot ROM Version MB21.00A5.B07. Any guesses as to why this new update won't run on my MacBook? It's supposed to be for all versions. Thanks for your help.
    --Eric
    Are you getting this update from the automatic updater? If not, you don't need it and you certainly don't want it.
    Unlike software updates, one should never attempt to install a firmware update that is not specifically designed for that machine. Downloading and attempting to install firmware that is not correct can result in corrupted EFI and the need for the firmware restore CD.
    You did make a firmware restore CD as instructed, I hope. It's the first step.

  • Conflicting information from support pages about firmware update error

    I recently opened my Macbook to see a firmware update. I followed the instructions to install it, however when I went to shut down to complete the process, I got an error: +"unexpected error occurred (0); unable to upgrade firmware"+
    After several tries, some digging through the support articles yielded this information:
    +Firmware updates for Intel-based Macs require a GUID partition scheme+
    +Firmware updates will not install on an Intel-based Mac if the computer is using a non-standard partition scheme, such as an fdisk scheme. You may see an "unexpected error occurred (0); unable to upgrade firmware" error message, or your computer may start normally (after a single beep if the power button is held) when attempting to install the firmware update.+
    So I followed the instructions to determine which partition scheme I had. It was "applepartitionscheme". I read further to see how to correct this, assuming I should to make sure I had the latest updates on my computer. After seeing that it required backing up data, and potentially my install disc, I decided to put my Service Plan money to work, and have Apple Support walk me through it, as I am still a rather novice Apple customer.
    I admit I was frustrated that the man on the phone did not seem to understand that I already had a grasp on my problem, and that I bypassed a lot of the diagnostic steps already. I realize that tech support has to follow some step by step manual when talking to a customer, but sometimes I hate being patronized. (Yes, my monitor is on, yes I am connected to the internet. I am not stupid.) I explained I recently had the hard drive replaced. He walked me through "Repairing Permissions" using my install disc. This did not fix the issue. He explained that the update was probably not needed. It wasn't compatible with my computer, and that the techs who put my new drive in probably installed any updates I needed at Apple Care.
    But, am I just really not educated enough in this? Wouldn't my computer say then if it had the most current update? When I check my version it reads : MB....B02, 1.13f3 but when I check under the list of latest update for Macbook it reads, MB...B07, 1.4f12. Is my new hard drive is indeed updated, but my "About This Mac" still thinks it has an older version? Am I going to have this problem with every update?
    I find it hard to believe that after reading this highlighted tech support article:
    +An Intel-based Mac's hard disk must be formatted with the GUID partition scheme to apply a firmware update. Intel-based Macs are shipped this way from the factory. If you have reformatted your hard drive, you should check which scheme your hard disk is currently using before applying a firmware update.+
    that I don't need to fix this incompatibility. Can anyone help with this?

    fatoots wrote:
    ... This did not fix the issue. He explained that the update was probably not needed. It wasn't compatible with my computer, and that the techs who put my new drive in probably installed any updates I needed at Apple Care.
    At that point say you are not satisfied and you would like to A: talk to his supervisor
    or B: escalate the problem.
    Trust what "System Profiler" tells you, not what "Software Update" tells you.
    You DO need to resolve this update.
    * backup your data
    * repartition the HD using GUID
    * reinstall MacOS
    * install all updates
    * restore your data

  • When the wifi bug from new ipad is gonna be fixed!!! plz apple do something!!!! this is really annoying

    as the topic says
    slow connection,unstable...... plz we need an  update(Firmware update) to fix this problem with the wifi in the new ipad.

    Depends on whether it's hardware or software.
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
     Cheers, Tom

  • New MacBook EFI Firmware Update 1.0 update

    "This EFI Firmware Update fixes known start up and wake-from-sleep issues on MacBook computers. If the firmware update doesn't run automatically, open it manually in the /Applications/Utilities folder."
    Just to let you know.

    just installed. i've had some serious trouble with my macbook the past couple of months. sometimes, i would shut my macbook and it wouldn't sleep, or it'd take a little while to shut down.
    tested it, so far so good. took a little while to install and holding down the power button was a little scary.

  • New 'anti-flicker' firmware update available...

    ...apparently posted today, 1 February, and available through Apple software updates. For 27" iMacs.
    There's no real explanation of what it fixes or how...just a sentence or two of what it is supposed to do.

    It works, and it works well.
    This is a firmware update for the actual LCD Display in the 27" iMac, not the graphics card.
    The video corruption/flickering/blanking goes away after applying this update.... it works great!

  • How to install new Nokia E63 firmware update via O...

    Please nokia. Is there any system or downloadable application that can download and install new Nokia E63 software(software updater over OTA)?. If there is any out there please i will like to get the link and download it. If there is not. I thing this is what programmers should do or nokia them self. Thanks

    Did you try Nokia Software Updater, or Nokia Suite, or Nokia Software Recovery Tool already?

  • Anyone NOT having problems with ITunes 8 and latest firmware update???

    I have really been put off updating to ITunes 8. The firmware update appears to be doing well. Is there anyone that uses a MacBook like myself who have had absolutely NO problems with new Itunes and firmware update? Answers on the back of a £50 note....

    Not having issues now that I have updated all i(hardware) firmware to version 2.1, two phones and an iPod Touch, all work fine (So Far) (knocking on wood). As far as iTunes goes I have mixed feelings. It's a bit faster and more stable, however they removed the "Burn CD" ability from the software. That blows a bit as I would make CD's from some of my play lists to play in the car. Yes I can dock my devices in the car, but as a matter of convenience it's easier to fire up the CD when your in a rush.

  • Latest firmware update 6.3 and dead airport express basestation

    My Airport Express basestation (aebs) is 13 month old. It suddenly went dead. No light, no reset, nothing.
    And maybe a coincidence:
    It happened only 36 hours after I loaded the new 6.3 firmware update.
    I wonder if anyone had the same experience regarding a dead aebs due to firmware update 6.3. At least - compared to the posts here - a dead aebs is not such a rare incident as one might wish it would.
      Mac OS X (10.4)  

    Exactly the same has happened to mine, although I don't recall doing a firmware update. Yesterday I just downloaded and installed iTunes 6.0.2 & QuickTime 7.0.4. However, when I came home from work this evening my Airport Express had no LED on as normal. It was cold and had obviously been off for sometime. The fuse it OK and it's just one month after the 1-year guarantee period. Sounds suspiciously like a plot to me....
    What has Apple done to kill my Airport Express???
    20 G5 iMac iSight   Mac OS X (10.4.3)   Airport Express, iPod 60GB

  • Airport extreme firmware update screwed up my IP sharing and internet

    I am having all the same problems -
    1) I upgraded to the 7.1 firmware
    2) I got the 'double NAT' error, but no problems connecting to the internet
    3) When I turned the bridge mode to off, I lost my internet, so I
    4) Tried to turn the bridge mode back to Share an IP address, but got an error about IP addresses.
    5) I went into Setup - the network port mapping tab - and unchecked and then re-checked the Airport button, so now I have internet access, but only at one computer, and if my computer is functional, my VOIP modem is not (or vice versa)!
    6) when I tried going back into "Share an IP address", I got the same error about the beginning and end DHCP conflicting with my WAN.
    (If it helps to know, I have two AEBS - one is set up as the Main WDS station, and the other Participates in that WDS)
    Now I'm afraid to touch anything!!

    kayek wrote:
    I have installed the new AirPort Extreme firmware update (7.4.1) and with airport disk utility i want to connect automatically my hard drive related to the airport (wifi mode) , the connexion was working well before that update and now i have an error message (unknown user or wrong password error -36 ...) when the disk tries to connect automatically.
    I would like to rollback to the 7.3.2 firmware version but there is no way to find it on internet (or on apple download) even if i change rollback airport utility to version 5.4.1: the binary firmware 7.3.2 disapeared from my mac and i can only choose 7.4.1 binary file ...
    Do anyone have the same problem ?I you found how to fix it please answer my post (thanks)
    Ok, here's how you actually do the downgrade - here's what Apple says, not exactly right - I would add that you HAVE to go to the MENU, choose BASE STATION, then hold down the Option key while pressing UPLOAD FIRMWARE, this will get you to a window that has the dropdown with older versions....the other versions were not available to me any other way.
    {quote}If I have a computer or device that does not work well with an AWD with the latest update, how can I install previous (earlier) versions of firmware?
    1. Open AirPort Utility.
    2. From the AirPort Utility menu, hold the Option key (Control key in Windows XP and Vista) and choose Check for Updates....
    3. Select the specific firmware version you require.
    4. Click Download.
    5. Select your base station and choose Manual Setup from the Base Station menu, or double-click on the AWD icon.
    6. Choose Base Station > Upload Firmware.
    7. Select a firmware version and click OK.{/quote}

  • New Iphone baseband firmware has killed all GPS location software.

    Are apple aware that the new iphone modem firmware update has effectively broken the iphone 3gs as far as GPS location goes. I have looked around on various forums and on the tomtom forum there are lots of people in the same situation.
    http://www.tomtomforums.com/tomtom-iphone-navigator/22273-ios4-1-4-upgrade-no-gp s-fix-iphone-3g.html
    I have not seen evidence of apple acknowledging the issue...so dont know if they are even aware of the problem.

    I'm getting very interested in GPS problems across the iPhone range. Ive got a 3GS and the GPS satellite fix stopped working completely recently. A fix identified using jailbreak and an ssh terminal tells me a good proportion of these problems are with locationd, the gps process in the iPhone, or more accurately, I think that it's possible for some of the data this process uses to become corrupted; the "fix" involves stopping the process and deleting the data it uses. On restart, locations is forced to rebuild the data, and everything then works.
    I suspect this is true across the iPhone range - and worse, I think that the backup function in iTunes actually backs up the bad data. Thus, when you restore from backup, you actually put the problem back in! Either that, or GPS cache data isnt deleted when the iphone is restored.
    What we need is an option in iTunes, or the iPhone settings, to clear GPS ephemeris and related data down and restart locationd: this will save apple a fortune in support at genius bars, as I reckon everyone who is getting a replacement is just getting a reblanked refurbished iPhone with no hardware fixes - they could be turning them around in the back of the stores!
    We need to get some group pressure together to get an answer out of apple on this really - they do seem to have an approach which has much in common with the way the UK banks were dealing with overdraft fees - if you complained, they refunded just to keep you quiet and make sure you didn't shout. If this issue is an underlying gps driver or application demon issue, they should give us a way to work around the issue.

  • Firmware update on MBP ruins connection with iMac

    After the firmware update yesterday, the finder on my MacBook Pro is no longer able to transfer files from my iMac to my MBP or vice versa. Most folders on my other mac are visible, but some crash the finder, transferring files gets part of them moved over, but then it stalls and crashes the finder.
    Seems like a serious bug. Or has the firmware update simply removed the file transfer possibility at all?
    Reinstalling Lion wasn't even possible as the recovery program stalled as well. It was not possible to choose a language. Looks like a serious problem.
    Any good suggestions to fix this?

    After several hours of downloading, Lion was reinstalled. I had thought that my recovery stick would be enough to recover Lion, but it took hours and hours of downloading ("additional components") and installing to get it back. Wifi flipped out each time, so that did not work, I had to use an ethernet cable for the connection. And I don't know if the existing problem with the finder (not being able to properly connect to my iMac and transfer files) has been solved now. I'm a bit afraid to check it out. Just imagine the problem still exists!
    Anyway, if this is the future, downloading restored os x and apps from the Apple servers, then I am afraid I'll let this cup pass from me.
    I am still shaking.

Maybe you are looking for

  • How can i change my email if my account is disabled

    My old email was hacked , so i had to disable it ... now my itunes account has been disabled , because the email is no longer in use . im not able to get into the account to change any information, i cant update any of my apps because it asks for me

  • Error in router's web-based setup page (WRT54G V5)

    Hi, My router's web-based setup page is unable to load fully. There seems to be an error with some document.setup.save file. I have tried to reset my router but the router's web-based setup page is still unable to load fully. Please help. Thanks.

  • Ibooks changes the dimensions of cover image

    I have been working on an epub using Calibre as the converter platform. I have used the program in the past and it always works until now. I am working on a new book and the cover image dimensions are changed in iBooks. The image looks correct when I

  • Do I need to uninstall?

    Logic 8 starts to open and then quits (after hard drive crash and a TM back up). Do I need to uninstall Logic 8 before reinstalling? If so, are there directions for a proper uninstall.

  • Beltclip for Zen V / V Pl

    Hello, I recently upgraded from a MuVo N200 to a Zen V Plus. One thing I really liked about the N200 was the case with built in belt clip. I found this clip to work very well when jogging; sturdy, stays in place, yet still easy to pull off the side o