N79: Cannot move Access Point into predefined grou...

Hi there
Hope somebody can help. I'm trying to move an access point, with the destinations feature, into the "Internet" group from the "Uncategorised" group, but when I select "Organise"->"Move to other dest." and then select "Internet" as the group I want to move the access point into, the program just shuts down, and the access point has not been moved.
To access the "Destinations" feature. Go to Menu->Tools->Settings->Connection->Destinations. As far as I have understood, it's a new feature on S60 3rd edtion FP2 phones.
I can move access points into custom groups, but not into the predefined ones, so is that a design decision or an error? And how do I get access points into one of the predefined groups if it's a design decision? I have tried to redownload settings from my provider, but that didn't help, as they just landed in the "Uncategorised" group.
Thank you in advance for any help that you may be able to provide.
Solved!
Go to Solution.

I am able to do this on my N96, which is also an S60 3rd ed. FP2 phone like the N79. Potential reasons for your inability to do this that come to mind are software bugs and operator branding (if you got your phone through an operator rather than SIM-free from an independent retailer).
We can eliminate the former by performing a few different resets on the phone.
Start by doing a restore factory default settings. Enter *#7780# from standby and supply your security code when prompted. The default is 12345. This won't delete any data of yours, it'll just clear your settings meaning that you'll have to set up your theme, ringtones etc. again, but that's all.
Secondly, try a soft reset. This will reformat your phone's central memory, so back everything up on your phone before you do this or your contacts, messages etc. will be lost. Enter *#7370# from standby and supply the security code when prompted.
If that doesn't work then you can attempt a firmware update either by FOTA or using NSU. Always follow the update up with a *#7780# since it seems to iron out many post-update problems.
If the update doesn't change anything, or if there's no update available anyway, then you can always take the phone to a Nokia Care Point to see what they have to say, but at this point it looks like operator branding is responsible for this.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Similar Messages

  • Cannot move any files into trash to delete them. I get a Trash warning box saying "The Finder cannot complete the operation because some data in 'file name' could not be read or written.(Error code - 36)".Macbook has so much data it is almost not working

    Cannot move any files into trash to delete them. I get a Trash warning box saying "The Finder cannot complete the operation because some data in 'file name' could not be read or written.(Error code - 36)".Macbook has so much data it is almost not working.
    I have tried reseting to factory settings by removing battery and holding down the power switch for more than 5 sec but this does nothing.
    Any ideas would be greatly appreciated as I think with so much unwanted data on the desktop and other places the whole os will crash very soon.
    Thanks, Rick

    The hard drive may be dying anyway, or the directory damaged because it is so full.  You should never let the hard drive get over 85% full.
    A -36 error is a read/write error.
    All you did with the power is reset the SMC.  Does nothing to reset everything to factory settings. 
    Do you have your original 10.4 installer discs for the MacBook?
    Is your data backed up?

  • E52 - after update cannot add access points

    Can anyone help plz? I updated firmware to 054.003 but now I cannot add access points for wap/mms/internet! The setup wizard only gives me the option to add an email address only...before update I could get operator settings which is not the case now. Can anyone help? My cell phone carrier is ORANGE IL.
    Thanks in advance.
    mike

    I upgraded an unbranded E52 last night to 054.003 and didn't have any problem adding new access points that the operator (in this case vodafone UK) pushed out.  Suggest maybe a hard reset on the phone?

  • Cannot connect Access Point (WPA2 EAP Leap)

    Dear Expert
            We 've try to configure Client to connect to Access Point (WPA2 EAP Leap) but cannot connect and We've found LOG on Wireless Controller as below.
    Please advise me that What I should to do.
    *Sep 29 14:45:43.102: %APF-1-DISCONECT_MOBILE_DUE_TO_WLAN_SW: apf_policy.c:535 Disconnecting mobile 00:14:a5:d2:81:25 due to switch of WLANs from 2 to 3
    *Sep 29 14:45:41.085: %APF-1-PROC_RSN_WARP_IE_FAILED: apf_80211.c:2234 Could not process the RSN and WARP IEs. station not using WPA or WPA2 on WLAN requiring WPA and/or WPA2.MobileStation: 00:14:a5:d2:81:25, SSID:airport-sup,AP: 00:26:cb:a9:7d:30.
    Best Regards
    Peera

    Hi Peera,
    the first message is because the user switched quickly between SSIDs. This is a behavior that WLC blocks by default.
    Change the option "Fast SSID change" to enabled if you want to stop that blocking.
    The second message simply means that the client was not configured for wpa/wpa2 ... This is something I can hardly comment on since I can't see the client configuration

  • Turn your old WAP54G access point into a nice universal repeater

    If you have an old Linksys WAP54G access point lying around, you can turn it into a nice repeater even if you don't use a Linksys wifi router.
    The stock firmware in the WAP54G supports only Linksys routers for repeater and bridge functions, but if you upload the very nice DD-WRT firmware (at your own risk, etc.) from here and then configure your reborn device as described here, you can get around the proprietary block built in by Linksys.
    I wouldn't do this with a critical device or one that's still under warranty (if indeed there are any still under warranty), but if you're like me and you have a growing collection of network gadgets in your closet, you might be able to blow an afternoon and have a little fun.
    I haven't tested to see if the effective range is actually extended or boosted -- probably not boosted, but just relayed -- but certainly I connect to a much stronger signal than when I had to pick up my wifi signal from the other side of my home.
    Plus, I had the immense satisfaction of circumventing a manufacturer's proprietary restrictions on the use of purchased hardware.

    dhave wrote:Plus, I had the immense satisfaction of circumventing a manufacturer's proprietary restrictions on the use of purchased hardware.
    I felt the same way when I jailbroke my iPhone.

  • Implement a Cisco WAP200E Wireless-G Exterior Access Point

    Hi everybody,
    I am asked to install a Cisco WAP200E Wireless-G Exterior Access Point into my company network infrastructure.
    But there is an issue that I would like you to help me to solution it.
    In fact the AP mentioned above is a PoE device, and our Switch is not PoE (Cisco Catalyst 2960 24TC-L).
    How to make my Wireless device works without having to change my Switch?
    Thank you for helping

    You can get a POE injector & power it without changing the switch.
    http://www.cisco.com/c/en/us/products/collateral/wireless/wap200e-wireless-g-exterior-access-point-poe/data_sheet_c78-503126.html
    Also better if you could move this thread to Small Business Support community where you may get more responses.
    HTH
    Rasika
    **** Pls rate all useful responses ****

  • Cisco WLC 2125 and AIR-LAP1252AG-A-K9 access points

    We are running into a little issue here and looking for some help. We have the Controller configured and it appears to be working properly the issue we are running into is that we can only get the above mentioned access points to only join the controller if they are plugged directly into the controller. I would assume that we should be able to plug these access points into any of our switches and they should be able to join the controller correct? Obviously there has to be a configuration issue somewhere and am hoping someone can point us in the right direction.

    WAP to Switch - Access port
    WLC to Switch - dot1Q trunk on the switch and tagged on the WLC side

  • 1130AG Access Point PoE Problem with Cat 3750G-24PS-E switch

    I am having a problem on the PoE negotiation of Catalyst 3750G-24PS-E and 1130AG Access point. I used straight and cross cable for physical connection since by default the auto mdix per port of the switch is enabled/on. I used CLI, CNA and Web Device Manager on both devices to isolate and troubleshoot the problem but still the PoE negotiation on both devices won't work out. But when I used the access point into other switch (CE500 PoE Switch), the access point is working properly. Does anyone can help me to distinguish what the problem really is? The IOS Version of 3750G switch is 12.2(25) SEE2 and the 1130AG access point IOS Version is 12.3(8)JEA.

    Hi Rob,
    Thanks for your reply. Yes, I tried shut/no shut on the switchport many times. I saw that the switch grant power inline on the port but the port still can't/won't provide any power to boot up the access point.
    Thanks,
    Nelmar

  • I have 2 screens at work and 1 screen at home. I was working on a power point presentation on 2 monitors. My window is now "stuck" when I Power Point. I cannot drag it back to a display or find any way to move it back into my view. Help!!!

    I have 2 screens at work and 1 screen at home. I was working on a power point presentation on 2 monitors with the presentation on monitor externally hooked up to my computer. My window is now "stuck" when I open Power Point. I cannot drag it back to a display or find any way to move it back into my view. Help!!!

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • LGBD390 blu-ray cannot find the access point of WRT160N/3.

    I have been trying to set up the wireless connection to be able to view streamed movies from netflix through my LGBD390 blu-ray player.  I have successfully connected the wireless router to my Embarq router.  When I check status, it says it is enabled and connection is o.k.  I have been on the phone with Linksys (and was charged $9.99 which did not solve my problem).  I also have chatted and so far that has not worked either.  I have downloaded the upgrade for the firmware.  No matter what I do, the blu-ray cannot find the access point of the router.
    Can you help?

    thank you for your responsse Wizzard, but there are things I need to change that I don't know how to do.  I have no idea  how to assign static ip, subnet and gateway on the blu-ray.  When I went to the link , it was actually for  adifferent router than mine.  I have a WRT160N/v3.  I also did not know what to put in the protocol.  and if I should just put the number in the beg. and ending.   I also don't think I have an ethernet adapter.  Maybe you could give me more information.  Thanks in advance.

  • Cannot associate with the access point error message

    We just got high-speed Internet installed at our house. We have a cable coming into the house that connects to a Linksys WAP54G router in our basement. We have two Dell Dimension computers that we installed Linksys PCI Wireless G Cards into. The computer down the basement is working just fine. The computer upstairs which is directly above the router worked fine the first day. The computer got powered down and upon restart wouldn't connect again. I did a system restore and it worked fine. Windows errored out yesterday, and now even after doing a restore, I cannot get it to connect to the wireless network. The error message "Cannot Associate with the Access Point" comes up. When you search for available wireless networks, none appear. Any ideas?

    Try connecting to the network using the Wireless Zero Configuration...just checkout on the right-hand side bottom of the screen pc right-click the Wireless network connetion icon...click view available wireless networks...click refresh network list...on the same list you will see Change the order of preferred networks...on top of the page click wireless networks...in preferred networks...remove each & every network...click OK. Now, once again right-click the Wireless network connetion icon on right-hand side bottom of the screen & click view available wireless networks...click refresh network list...now you will be able to see your wireless network..if its a secured network it will ask you for the wireless wep key...put in the key...where it says confirm the network key & click connect...it will be CONNECTED....and you will be able to go ONLINE WIRELESSLY!!!

  • HT1918 I recently was unable to watch a movie I purchased & paid for because my credit card was out of date. Surely you cannot take access to items I have purchased away from me if I do not own a credit card?

    I recently was unable to watch a movie I purchased & paid for because my credit card was out of date. Surely you cannot take access to items I have purchased away from me if I do not own a credit card? Does this mean that I will no longer be able to view purchases if I decide to cancel my credit card. If this is the case, I will not be purchasing movies from iTunes again

    We are fellow users here on these forums, you're not talking to iTunes Support nor Apple.
    If you have a credit card on your account then it will need to be valid. If you don't have a card to replace it with then have you tried removing it from your account ? On your computer's iTunes you should be able to edit your payment info by going into the Store > View Account menu option and logging into your account, and on your account's details page there should be a payment link.
    Changing payment info : http://support.apple.com/kb/HT1918
    If you don't get the 'none' option on the payment details screen then do you owe iTunes anything or have any pre-orders/subscriptions due : http://support.apple.com/kb/TS5366 ?

  • How can I turn mac mini into wifi access point for iPhone?

    Hi,
    I do not have a wifi router.
    I want my iPhone to be able to use my broadband internet instead of the slow EDGE internet.
    The simple solution would be to buy a wifi router whih would enable my iPhone to access the wifi home network.
    *What if I could turn the mac mini into a wifi access point?* That would save me from the hassle of buying a wifi router.
    Any idea how to do this??
    Message was edited by: d00by666

    I did this.
    I think I am doing something wrong. I am doing something wrong in this setting *from ethernet to airport*.
    see attached screenshot.
    To start Internet sharing on a computer using Mac OS X:
    1. Open System Preferences, click Sharing, and then click Internet.
    2. Select how you would like to share your Internet connection, and then click Start. You
    can choose to share your Internet connection with AirPort-enabled computers,
    computers with built-in Ethernet, or both.
    Note:
    If your Internet connection and your local network use the same port (built-in
    Ethernet, for example), contact your ISP before you turn on Internet sharing. In some
    cases (if you use a cable modem, for example) you might unintentionally affect the
    network settings of other ISP customers, and your ISP might terminate your service to
    prevent you from disrupting its network.
    3. If you want to share your Internet connection with computers using AirPort, click
    AirPort Options to give your network a name and password.
    ----------------------------------------------------

  • After I import the photos into light room from a folder, the deveop module cannot be accessed? What can I do to process those photos that are on my hard driive?

    After I import the photos into light room from a folder, the deveop module cannot be accessed? What can I do to process those photos that are on my hard driive?

    If you are using a standalone version of Lightroom, you may have updated with the CC-licensed update. That will not work. If this is your situation then it will be necessary for you to uninstall Lightroom and then install an update from a different website. Assuming that you are using Lightroom 5, this is where you need to download from:
    Product updates
    After you make the change you will be able to continue from where you left off. The switchover does not affect your images or your catalog.

  • Am useing a PC. Have Photoshop CS5, suddenly cannot move Raw files from bridge (or anywhere else) into photoshop. Jpeg move into photoshop ok, did get error message 1 what do I do to correct this                om bridge (or anywhere else for that matter)

    Useing a PC
    Have Photoshop CS5
    Suddenly cannot move Raw Files from Bridge (or anywhere else) into photoshop.
    I Can move Jpegs into ps the only issue is with Raw files
    I did get error1 message but as do not know what that means its no help
    any suggestions?

    Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
    The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
    However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
    I can open the RAW file only if I restart my computer - very annoying!
    However, thanks for the advice about the video card & memory.
    So, I'm still stuck as to what the issue is.

Maybe you are looking for