N79 + N800 DUN problem

I am not sure if this is the right section of the forum to post this problem.
Whenever I use my n800 to DUN with my n79 i will encounter, after a period of time no internet connection.
however the n800 still shows its still connected to the n79 via DUN.
When the problem occurs its entirely random, it may happen a few mins after dial up or even a few hours.
when it does occur I will have to disconnet the bt connection via the n800. Attempting to dial in again via the n79 will normally fail. only after resetting the bt on the n79 then will i be able to dial in again.
It seems that it might be a BT problem on the N79. not sure if its a hardware or sofware problem.
using the n800 and n79 with my other phone (E51) and PC gives me no problems
N800 + E51 => no problems
PC (Win xp) + N79 => no problem
the n79 has software version 11.049.53.1
does anyone has any idea what the problem might be?
Thanks in advance

Try a hard reset. If it fails, then you have to take your phone to a Nokia Care Point.
Hard reset. Turn off the phone. Press and hold three keys together, the green key, the '*' key and the number '3'.Then, turn on the phone and don't let the three keys before you see the Nokia hands logo.
For 5800 XM hard reset need different keys. The green key, the red key and the camera button.The process is the same.
And, for N97 go to /discussions/board/message?board.id=smartphones&me​ssage.id=158831&query.id=591236#M158831
WARNING!Hard reset deletes all your phone's data!
If you want to thank someone, just click on the blue star at the bottom of their post

Similar Messages

  • N79 fm transmittor problem in 32.002

    We all have common problem of Fm Transmitter hanging up whole cell after a song .Please make us available with new firmware of n79. i have update to new firmware ie32.002 . so we can enjoy our nokia phones to its best .

    Hey guys please respond..

  • Nokia n79 navi-wheel problem.

    my nokia n79's navi wheel isnot working. its on from setting, navi light is glowing around center button but navi wheel is not give any response. my software version is 32.001, its a t-mobile unlocked fone.  

    Here are a couple of things to try (in this order):
    Turn off phone, remove battery for 5 seconds, replace, turn on phone.
    Adjust naviwheel setting to OFF, leave Settings application (return to standby), then open up Settings once more on turn naviwheel back on.
    The naviwheel, as you might know, does not work across all applications; nor does it work beyond a certain "depth" of menus.  You should test it at the "root" (first) level of the Menu application.  If it doesn't work there, perhaps you need to back up your settings and data and reinstall your phone software.  But first: do you have any applications which allow for key shortcuts or special key mappings?  There could be a conflict there.
    Finally, there have been problems with an electrical component behind the naviwheel, but this is more commonly associated with a general keyboard lockup.
    Good luck, and maybe someone else will have some additional suggestions...

  • Nokia n800 wlan problems

    Just was looking for some insight on my n800, the wlan is not able to locate access points what it use to be able to. I am stumped on how to get this to work or just to send it in for repairs. Is there anything I can do to resolve my issue.

    Or senior member cjlim has written an article in our Pool of Knowledge about problems with WLAN connections. Even if this might not fit 100% for your problem, maybe some of it´ll help you...
    /discussions/board/message?board.id=topfaq&thread.id=166
    Good luck and let us know if this provided any kind of help! 
    By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
    The day we stop improving is the day we stop being good.

  • N79 Video REcoding problem

    Hello All,
    I purchased my N79 5 days back. I am happy with my device.
    But when i started exploring Video recording i found recording freez in between for a short while(.5 - 1 sec) and continue agai. When i play the recording the same is displayed.i.e. recording is not continuous.
    Can anyone else having the same problem and solution?
    Thanks
    Solved!
    Go to Solution.

    Try a reset.
    Factory settings reset. In standby, dial *#7780# and the phone's lock/security code (the nokia's default security code is 12345). This reset restores phone's original settings.
    Soft reset. In standby dial *#7370# and the phone's lock/security code. Soft reset deletes ALL your phone's data.
    Hard reset (the three key code/reset). Turn off the phone. Press and hold three keys together, the green/talk key, the * key and the number '3'.Then, turn on the phone and don't let the three keys before you see the nokia hands logo/nokia boot up screen.
    For 5800 XM hard reset need different keys/buttons. The green/talk key, the red key and the camera key/button. The process is the same.Warning!Hard reset deletes ALL your phone's data/files!
    And, for N97 go to /discussions/board/message?board.id=smartphones&message.id=158831&query.id=591236#M158831
    If this post was helpful, thank me by clicking the Kudos! star.
    If you want to thank someone, just click on the blue star at the bottom of their post

  • N79 - Intermittent freezing problems

    My problem started when i was using the browser. Suddenly it freezes and any key presses has no response. I off and on to reset but it work for a second then freezes again. I did a #*7370# with no help. Eventually I did a 4 finger reset and managed to get everything working again.
    But now intermittently it still freezes and sometimes the selections keeps skipping to the next selection like a key git stuck. I have to off/on to get it working again.
    Sometimes I also get the message that memory is low and I should delete some messages...or something but upon checking the phone's memory it is still free with 45MB and 6GB in my card. Again, I have to off/on to make it work again. It shows this memory full message when Im opening a text message. I cant read it until i off/on the phone. 
    Im on the 11.049 version 
    Nokia N79 8GB
    SW Version: 11.049 RM-348
    Solved!
    Go to Solution.

    I am located in Malaysia. I am Chinese too.
    Anyway I have not gone back to Nokia Service Center. I hope to solve the problem by myself. I will try to hard reset it again.
    The problem is its so intermittent that its very difficult to determine what causes it because sometimes the problem changes. Sometimes I have to take out the battery to reset it. Sometimes just off/on will do the trick. Sometimes the key moves rapidly like its stuck and sometimes it just frozen and no key presses will do anything.
    Have you taken it back to Nokia? 
    Message Edited by fring on 17-Feb-2009 01:34 PM
    Nokia N79 8GB
    SW Version: 11.049 RM-348

  • Nokia N79 FM Transmitter Problem

    Hi guys,
    I'm from India and purchased an N79 about 6 months back.
    I have updated my firmware to the latest 32.001.
    However I seem to have a problem with the transmission of the FM Transmitter.
    Earlier in firmware versions 11.XXX and 20.XXX the signal from the FM Transmitter used to be very clear, and the output from the speakers very neat. Almost as good as the car music system. However with the update in firmware, the signal is really low and there is a lot of disturbance when I'm transmitting. I tried to use different frequencies to transmit, but the result is the same. Kindly help me guys. I really love this phone and this application. Hope to get a solution soon.
    Thanks and Regards.

    Hey guys please respond..

  • 2nd Level Dunning Problem

    Hello Experts
    I have configured the two level dunning procedure. Configuration settings are as follows:
    (a) Defined the Dunning Area
    (b) Defined the Dunning procedure in the following manner:
    Dunning Interval in days - 1
    No. of Dunning Levels - 2
    Total Due items for Dunning - 0
    Minimum Days arreas - 14
    Line Item grace period - 14
    Selected -> Standard transaction dunning
    Under Dunning Level Tab
    Days in Arrears - 14 & 35
    We are not using interest & no penality charges.
    Assigned the Dunning Test with the following combination
    Observations during Testing :-
    (1) Customer sales invoice posted on 01.03.2011 and due date is 01.03.2011
    (2) 1st level dunning carried on 21.03.2011 and dunning run and print out is success
    (3) 2nd level dunning carried on 30.04.2011 .... here the system is showing the dunning run log
         Document number XXXXXX (same document what i have posted on 01.03.2011) has now dunning level 2
         But the system is  (a) Not checked the Dunning notice / dunning area for customer
                                       (b) Not checked the  Dunning procedure
                                        but shown as job finished
        If i continue the print out option - the sytem is showing 0 dunning notices are read & not customer dunning history updated
    Kindly let me did i missed any configuration ? Altenatvely if i want to do the debug with the help of ABAP.. in which program i need to maintain the Break point
    Kindly revert
    Regards
    Anil

    Hi
    Did the dunning run on suggested date.. but unfortunately the result is the same
    Regards
    Anil

  • Dunning Problem

    There is an error that is below in transaction F150
    Error : Customer X is blocked by dunning run 20080430
    In fact ,The job for dunning  01052008- SADTE  has been deleted and last dunned 01052008 on customer master data.
    There is no dunning run on this date-20080430 .
    What do you recommended me ? Thanks.
    Dash

    Hi again ,
    We implemented OSS note186095 but now  we have another error that is 'for X customer ,there is no dunning procedure exists, can not be dunned.'
    In customer master data dunning procedure is  filled.
    What do you recommended me ?
    Also what is the differences between to  run ' individual dunning notice' and 'Run with identification ' ?
    B.Reg
    Dash
    Edited by: Dash Erdif on Jun 4, 2008 9:24 AM

  • N79 photo browser problem

    When all (photos) is selected, the number of photos changes up then down. The picture looks blurred when viewing low res shots transferred from the computer, far more res than the screen res of the N79 though. Sometimes they look OK then the next time blurred.The captured photos (taken with the phone) seems OK. The back button doesn't work, options>exit is needed to get the phone working again. I think maybe the original software has become corrupted. Is there a reset or refresh library command for photos like there is for music? I've checked the card with a test program - no errors. (res= resolution). I just bought a one year maps licence, I don't want to lose that.
    I took it to the phone shop and they said they can reset it to original but is there a quick fix?
    TIA

    Backup your data from mem card/mass memory, format it, copy back ur data.
    Previous Phones: 6600, 7610, 6230, 6230i, 1100, 1112, N70, N73, N95, N95 8GB, 5800XM, 5230, C5, iPhone 3GS, SE Xperia X10, N900, N8, SE Xperia Arc
    Current Phones: Nokia N9, iPhone 4

  • N79 - Music Player Problem

    I have stored my songs in 1 folder and other sound files in another folder. Problem is that, music player scans all folders, due to which, these other sound files are shown along with song files.
    I want that only my songs to be shown in music player and not other sound files.
    How to make music player to scan a particular folder only ???
    Solved!
    Go to Solution.

    It is a bit of an inconvenience, but you do have the most control over which music selections play when and in which order when you organize them into separate playlists.  In doing so you can also override the limited way in which the Nokia Music player orders tracks (due to the way it interprets mp3 tags) within an "Album".

  • N79 network signal problem

    hi guys,i have recently bought a n79 phone just a week earlier and now i am facing a probem with the device.The network signals and the operators name just disappears suddenly any time and then signals never come back till i switch it off and then switch it on.i used a samsung phone earlier with the same network operator and no such probem ever occured.

    could be an old sim card if its two years old or so it might be wise to get a new one, also can you exchange your unit or go to nokia care and see if they can make some assessment as to what might be going on ?
    You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

  • N79 Profile Setting Problem

    I've just got N79 and I set my profile to "Meeting" and I found that:
    When I set my Ringing Type to "Beep once" or "Silent" with "Vibrating alert ON". My phone does not vibrate at all.
    Please suggest
    Thanks
    Phitha

    Try a hard reset. If it fails, then you have to take your phone to a Nokia Care Point.
    Hard reset. Turn off the phone. Press and hold three keys together, the green key, the '*' key and the number '3'.Then, turn on the phone and don't let the three keys before you see the Nokia hands logo.
    For 5800 XM hard reset need different keys. The green key, the red key and the camera button.The process is the same.
    And, for N97 go to /discussions/board/message?board.id=smartphones&me​ssage.id=158831&query.id=591236#M158831
    WARNING!Hard reset deletes all your phone's data!
    If you want to thank someone, just click on the blue star at the bottom of their post

  • Problem of downloading mobile messenger of N79

    hi all,this is my 1st time visit here..
    my brand new N79 facing some problem of downloading mobile messenger,
    can any1 tell me how to solve it?
    thx and have a nice day
    Moderator note: Email Address removed
    Message Edited by dazz19 on 03-Feb-2009 10:37 AM

    try www.fring.com
    Nokia N79 8GB
    SW Version: 11.049 RM-348

  • N78 software update issue

    Hi, I just updated the firmware for my new N78, after updated , the process seem to be slow, now my camera can't use the zoom buttons, and my theme look not good and not interact as before.

    I didn't find any way back.. i only hope that nokia read this tread and build another firmware with all bugs fixed.. Overall i prefer v12.146 cause the navy scroll and right soft key is now working correctly.
    Or might be you can sell your phone, and buy the new N78 with old firmware.. or buy N79 with no problems found (yet).
    Have you ever try to change your camera default storage to Phone memory and restart? Is the zoom problem still exist?
    By the way, if you wanna have a fast application, i suggest you to install application in phone memory not in MMC.
    I hope this helpful

Maybe you are looking for

  • Logo does not appear on the printed adobe form

    Per the solution provided by Tejaswini Inserting a Graphic in adobe form using SFP I am able to upload the logo avaialble at SE78. I did the binding etc as per the thread above. But the print preview or print of the Form does not show the Logo. Does

  • Run the report through command prompt on Linux

    can anyone tell me how can run report through command prompt (Reort server is on Linux)? that thing I want to implement in form calling report. Please guide about it..

  • WM-Purchase order -Tansfer order issue

    Hi,      i created the purchase order and GRN, 1)  In the transfer order                                    Source stor.bin                              902 001 4500001113                                    Destination bin                            

  • Webdynpro-Java Number/Amount Formats as per Locale

    Hi, I tried searching for this in the forum but couldn't get a clear answer to my requirement. Is setting the Locale in the code ( NumberFormat.getCurrencyInstance(locale) etc...) the only way to show the numbers and amounts (dots and commas) display

  • Can't print from MacBook Pro os.10.6.7 to HP 5500 Officejet

    The printer is on list of supposed compatible printers. I installed the HP software for Mac.  I downloaded/installed updated drivers. The Mac sees the printer but cannot print, scan. The HP 5500 is in perfectly good shape and I don't want to buy anot