N79 Profile Setting Problem

I've just got N79 and I set my profile to "Meeting" and I found that:
When I set my Ringing Type to "Beep once" or "Silent" with "Vibrating alert ON". My phone does not vibrate at all.
Please suggest
Thanks
Phitha

Try a hard reset. If it fails, then you have to take your phone to a Nokia Care Point.
Hard reset. Turn off the phone. Press and hold three keys together, the green key, the '*' key and the number '3'.Then, turn on the phone and don't let the three keys before you see the Nokia hands logo.
For 5800 XM hard reset need different keys. The green key, the red key and the camera button.The process is the same.
And, for N97 go to /discussions/board/message?board.id=smartphones&message.id=158831&query.id=591236#M158831
WARNING!Hard reset deletes all your phone's data!
If you want to thank someone, just click on the blue star at the bottom of their post

Similar Messages

Profile set creation problem..

Hi,
I was trying to create profile set..but when I select attribute list from left, I am unable to expand data source ( attribute set & attribute ) & hence unable to drag to modelling area....don't know where did i mess up...?
Your guidance will be appreciated
Thanks in advance
Anil

Hi Deepak,
sorry. lemme tell you what z happening.
Everything is ok till maintaing data source for segment builder.attribute list is created with attribute set. i can see assigned attributes & these are filtered as well.basically in this section I can see my attribute set & expand these to see filtered attributes.no problem so far.
now coming to segment builder craete profile set, then camapign execution then camapign, new profile set is given a name.If i go left to attribute set & scroll to my attribute list I cannot see anything below attributes in component area. it seems nothing is being selected. i tried to save & see. no results.Obviously no drag/drop in staging area.
I know this is a very basic problem but i have nobody around me who i can sit with & sort out. I am just referring different materials & practising on my system.
If you can reply on anilbatra1athotmail.co.uk as i think i shouldn't waste everybody's precious time on such a basic operational issue.
Your prompt reply will be highly appreciated.
regards.
Anil

Creation of a Marketing Profile Set based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset thru the WebUI Segment Builder

Objective: Creation of a Marketing Profile Set based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset thru the WebUI Segment Builder.
Problems: Standard CRM_MKTTG_BP_BIRTHDATE Infoset DOES NEVER RETURN ANY RESULTS on the segmentation builder of the WebUI client (no matter the filter you specify).
Other cases: However if we create a new Data source with data "Extraction from Query" (transaction RS02) based on this standard CRM_MKTTG_BP_BIRTHDATE Infoset and we test the functionality using transaction RSA3, IT DOES RETURN RESULTS (using the same filters as in the segmentation builder)! Of course the segmentation builder works with other attribute lists.
NEW: IF WE DON’T ESPECIFY ANY SEGMENTATION BASE IN THE PROFILE GROUP, IT DOES RETURN RESULTS!!! (GO TO THE END OF THE DOCUMENT FOR DETAILS)
Steps followed:
Review Standard Infoset CRM_MKTTG_BP_BIRTHDATE (Transaction SQ02).Review Data Reading Program code: do we have to change the standard code? We have only remove the "BREAK-POINT" statement.
Creation of a Data source based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset (Transaction CRMD_MKTDS).
Creation of an Attribute List based on that standard Data source and selection the Birth date as a filter in the Attribute list (Transaction CRMD_MKTDS).
On the segment builder of the WebUI set any filter (Example: “TODAY”).
Steps in detail:
Review Standard Infoset CRM_MKTTG_BP_BIRTHDATE
SQ02.
(Image deleted)
Review Data Reading Program code (Code attached)
(Image deleted)
Creation of a Data source based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset
Data source: Transaction: SPRO – Customer Relationship Management - Marketing – Segmentation - Maintain Data Sources and Attribute Lists: CRMD_MKTDS
Create Data Source
(Image deleted)
Infoset: CRM_MKTTG_BP_BIRTHDATE.
Business Partner Field: CRMT_MKTTG_IS_BIRTHDATE-PARTNER_GUID
(Image deleted)
Result:
(Image deleted)
Attribute List
Creation of the Attribute List
(Image deleted)
Assign Data Source:
(Image deleted)
Selection of the Birth date as a filter in the Attribute list:
(Image deleted)
Result:
(Image deleted)
Segment builder of the WebUI:
Access to WebUI with marketing role.
Create Segment:
Creation of Profile Set
Graphical modeler
Create Filter: We have already tried many different filters (we already seen notes referring to this matter).
Example1: “today”
Count target group. Here I would like to stand out that once you click on the “Count” option, immediately it shows 0 results. In other words, it doesn’t process any information. With other attribute lists it takes some time to process, no matter the filter or the attribute list you use. However if we create a new Data source with data "Extraction from Query" (transaction RS02) based on this standard CRM_MKTTG_BP_BIRTHDATE Infoset and we test the functionality using transaction RSA3, IT DOES RETURN RESULTS (with “today” filter and other)! So it seems that the problem has to do with the segment builder, not the Infoset.
Result: it never return any results no matter the filter you specify.
Other cases:
Creation of a new Data source with data "Extraction from Query" where you enter the name of your new query
Creation of a Data source based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset
Standard Infoset CRM_MKTTG_BP_BIRTHDATE:
We fill the form and select “Extraction from Query”:
Press SAVE and define which fields will be available for selection and which of them will be visible.
RSA3: Extractor checker in order to test the Data source:
We specify the Data source:
IT DOES RETURN RESULTS:
ALV Grid:
NEW: It seems that it has to do with the Segmentation Basis selected in the creation of a Profile Set, because if we do not select any, it does return results. But we need to create this Profile Set based on a particular Segmentation Basis called BS Usuarios Registrados.
Segment builder – Profile Set of the WebUISegmentation Basis: we leave it in blanc.
Graphical modeler
Create Filter: We have already tried many different filters (we already seen notes referring to this matter).
Example1: “today”
Count target group.
Result: IT DOES RETURN RESULTS!!! àConclusion: the problem is the Segmentation Basis
Define Segmentation Basis:
Transaction: SPRO – Customer Relationship Management - Marketing – Segmentation – Classic Segmentation - Define Segmentation Basis.BS Usuarios Registrados:
Define Reports for Creating Segmentation Bases
Transaction: SPRO – Customer Relationship Management - Marketing – Segmentation – Classic Segmentation - Define Reports for Creating Segmentation BasesZMK_UTL_MGR_SITES_UREG
Define Usage for Segments:
Transacción: SPRO – Customer Relationship Management - Marketing – Segmentation – General Settings - Define Usage for Segments.ZBS_UR à02 Segmentatión Basis
Attribute List:Category:
There is no Category 02 Segmentatión Basis!!! Why?? Why is not posible to select Category 02 Segmentation Basis in the creation of the Attribute List???
Usage ID
NEW: It seems that it has to do with the Segmentation Basis selected in the creation of a Profile Set, because if we do not select any, it does return results. But we need to create this Profile Set based on a particular Segmentation Basis called BS Usuarios Registrados. Why is not posible to select Category 02 Segmentation Basis in the creation of the Attribute List???

It seems that the standard Infoset doesn’t work by itself with Segmentation Basis. Two SAP notes have been applied and a new Field Group has been added to the Infoset (in order to distint the Segmentation Base).
CRMT_MKTTG_IS_BIRTHDATE-MGRGUID
1966298: MGR_GUID is not populated correctly to infoset read program
2007687:Segmentation InfoSet queries saved with incorrect Master Group
For that reason we had to create a new Infoset based on the standard CRMT_MKTTG_IS_BIRTHDATE, but adding this new Field MGRGUID to the Group Fields.
Issue solved

IP profile set to 0.25mbps

I live nine months of the year in the USA. When I left the UK last September my Broadband was working fine. I don't know what the speed was, but it was good enough for me to work. When I returned this week my broadband speed was terrible. It was little better than dialup.
I then experienced BT Broadband help for the first time. They identified that the problem was at the exchange. I was told that the problem would be fixed, but would take up to 72 hours. I was stunned. Tell an American he has to wait 72 hours and see how long you stay in business. During this 72 hour wait I have educated myself on Broadband issues, thanks to this forum.
I have learned the IP profile sets my speed. When I left the UK, I turned off the power to everything, unplugged phones, etc.
I have a theory that because BT could not communicate with my Hub they dropped my IP profile number. I don't know if this is done automatically. If it is, I expect it to be reset automatically and not wait 72 hours. If manual, my call to BT should have initiated an Engineer to hit a reset button and again not have to wait 72 hours.
I welcome comments on my theory
Solved!
Go to Solution.

Keith_Beddoe wrote:
It will normally reset itself, provided your connection speed is good enough.
If you would like to provide your ADSL stats forum members should be able to give you a better idea.
Below my ADSL Status. Less than19 hours to go, or is 72 hours an estimate
ADSL line status
Connection information
Line state
Connected
Connection time
2 days, 5:35:49
Downstream
288 Kbps
Upstream
828 Kbps
ADSL settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.5
Latency type
Interleaved
Noise margin (Down/Up)
33.5 dB / 7.4 dB
Line attenuation (Down/Up)
27.5 dB / 13.5 dB
Output power (Down/Up)
17.0 dBm / 11.9 dBm
Loss of Framing (Local)
0
Loss of Signal (Local)
0
Loss of Power (Local)
0
FEC Errors (Down/Up)
0 / 48
CRC Errors (Down/Up)
0 / N/A
HEC Errors (Down/Up)
N/A / 1615
Error Seconds (Local)
0

How to create a profile set for a campaign.

HI Friends,
I am working on CRM 7.0.
My requirement is to create a Batch program for campaign creation and automation.
i have used the class 'cl_crm_mktpl_appl_base' to copy the existing campaign .
It copied the entire target groups,campaign elements, profile sets.
My requirement is for the created campaign id, i need to create a profile set in that i need to create target goups.
Fm : BAPI_PROFILESET_CREATE is not helpful for me in my case.bacause it is asking parent guid ..etc...
I have ony one guid ,ie. campaign guid . if i give this in parent guid it is thriwing error.
can any suggest how to create a custom profile set.
If any one worked on this batch program please reply to this thread.
Edited by: jagadheeswara raju on Feb 10, 2010 7:02 PM

Hi,
I have replied to the below thread mentioning the FM's to create Profile sets, profiles and also target groups. This may be helpful to you.
Re: target group creation
Regards,
Priyanka

Creation of Profile under profile set

Hi Everyone,
My issue is around creation Profile in the programming way using the BAPI or Function modules.
I have created Profile set using BAPI BAPI_PROFILESET_CREATE and target group with BAPI BAPI_TARGETGROUP_CREATE,
but unable to find the correct BAPI to create Profile and link it under the profile set.
I have to look into some forums and found few Function modules below which I have worked.
The Function modules that got triggered is CRM_MKTTG_PF_MAINTAIN, when i try this i am not getting any errors but it is not getting saved in database, i used bapi commit. but in actual creation from GUI sceanrio they are using some other function module CRM_MKTTG_PF_G_SAVE_OB.
Please suggest how to save to database after maintaining profile through CRM_MKTTG_PF_MAINTAIN.
Other scenario when i try using the FM CRM_MKTPF_CHECK_AND_CREATE, when i debug through i get following after coming out of the FM before saving.. We get the error saying Profile set ID does not exist, but actually it exists..
Can anyone let me know the correct data to be passed to the FM to create a Profile...
Thanks
Kranthi

Hello,
thanks for the quick response..
I have tried using the FM CRM_MKTTG_PF_SAVE but i get the error saying Profile not found in buffer...
Thanks

Backup failure due to Character set problem

Hi,
I am manually running a COLD backup script in Windows NT environment and all the logs has been captured below:
Recovery Manager: Release 8.1.6.0.0 - Production
RMAN-06005: connected to target database: db1 (DBID=754030292)
RMAN-06009: using target database controlfile instead of recovery catalog
RMAN> shutdown immediate;
2> startup mount;
3> RUN {
4> ALLOCATE CHANNEL disk1 TYPE disk;
5> BACKUP DATABASE TAG 'db1_db_full' FORMAT 'e:\backup\db1\db1_backup';
6> copy current controlfile to 'e:\backup\db1\Control_db1.ctl';
7> }
8>
RMAN-06405: database closed
RMAN-06404: database dismounted
RMAN-06402: Oracle instance shut down
RMAN-06193: connected to target database (not started)
RMAN-06196: Oracle instance started
RMAN-06199: database mounted
Total System Global Area 934143244 bytes
Fixed Size 70924 bytes
Variable Size 260554752 bytes
Database Buffers 673439744 bytes
Redo Buffers 77824 bytes
RMAN-03022: compiling command: allocate
RMAN-03023: executing command: allocate
RMAN-08030: allocated channel: disk1
RMAN-08500: channel disk1: sid=13 devtype=DISK
RMAN-03022: compiling command: backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure during compilation of command
RMAN-03013: command type: backup
RMAN-06003: ORACLE error from target database: ORA-06550: line 1, column 166:
PLS-00553: character set name is not recognized
ORA-06550: line 0, column 0:
PL/SQL: Compilation unit analysis terminated
RMAN-06031: could not translate database keyword
Recovery Manager complete.
As the above log shown, I cannot do any backup command in the RUN bracket and it complains that the character set is not recognized.
This set of error happens when I have create six other Oracle databases in my NT box. Before that, I can manually run the backup with no problem and a backupset has been generated.
If you have come across this problem and have solutions of it. That will be great.
Thanks !!
null

kk001 wrote:
Hi ,
The export Backup failing due to character set problem
. . exporting table ravidlx
EXP-00008: ORACLE error 6552 encountered
ORA-06552: PL/SQL: Compilation unit analysis terminated
ORA-06553: PLS-553: character set name is not recognized
P
Please suggest how to set character set
I don't know what you have.
I don't know what you do.
I don't know what you see.
It is really, Really, REALLY difficult to fix a problem that can not be seen.
use COPY & PASTE so we can see what you do & how Oracle responds.
do as below so we can know complete Oracle version & OS name.
Post via COPY & PASTE complete results of
SELECT * from v$version;

Using translate function to correct character set problem....

I have a table(TBL_STOCK) on Oracle XE.
Rows come from sql server 2005 with a trigger on sql server table via the linked server.
But there is a character set problem with some character like İ,Ş,Ğ.
They change to Ý,Þ,Ð. in Oracle.
How can i correct these ? Do you suggest the TRANSLATE function ?
What do u think, if i create an After Insert trigger on Oracle table(TBL_STOCK) and convert these character using the Translate function when they inserted from sql server.
Anyone have any other ideas that can be more efficient. Any thoughts appreciated.
Thanks in advance.
Adam
PS:The NLS_CHARACTERSET of Oracle is AL32UTF8.

It is sql server 2005 and Collation is SQL_Latin1_General_CP1_CI_AS

I cannot run You Tube Videos on my Apple Macbook Air MD760HN/B with OS X 10.9.4. the video window displays a message " An error occurred, Please try again later." Learn more. The screen is black with this message. There appears to be some setting problem?

Macbook Air MD 760HN/B with OS X 10.9.4
4 GB RAM, 1.4 Ghz intel Core i5
Problem 1
I.     On Youtube whenever I try to play a video, I get a message on a black screen "An Error Occurred, Please Try Again later. Learn More."
2.   I think it is some setting problem, being a new mac user, I am unable to sort it out.
Problem 2.
How to select more than one file in a folder to copy or delete. like it can be done in Windows with shift Click together.
if one has to select say, file 25 to file 37 in a folder with 75 files. select all (command A) works but I cannot select few continuous files.

Macbook Air MD 760HN/B with OS X 10.9.4
4 GB RAM, 1.4 Ghz intel Core i5
Problem 1
I.     On Youtube whenever I try to play a video, I get a message on a black screen "An Error Occurred, Please Try Again later. Learn More."
2.   I think it is some setting problem, being a new mac user, I am unable to sort it out.
Problem 2.
How to select more than one file in a folder to copy or delete. like it can be done in Windows with shift Click together.
if one has to select say, file 25 to file 37 in a folder with 75 files. select all (command A) works but I cannot select few continuous files.

Unable to see Target Groups, Profile Sets, Attributes, Attributes in Web UI

Hi Experts
We upgraded from CRM 5.0 TO New CRM 7.0
In segmentation,under normal segmentation on WEB UI could not see the Attribute lists,profile sets,Segments etc on the Graphical Modeler(Segmentation Builder)
We can see the same in backend GUI under Segmentation Builder (CRMD_MKTSEG)
Do we need to do any settings or configuration to view the same
Thanks
Raj
Edited by: RA_225 on Dec 7, 2009 5:42 PM
Edited by: RA_225 on Dec 7, 2009 6:13 PM

Raj
I am tempted to say java client issue. I say this because SAP support had the same issue with our system to resolve another issue and I believe they had to check local java settings. Also check what version of IE you are running.
Perhaps open a message to SAP to obtain java settings required to run segment builder applet as well as browser settings.
Chris

JDeveloper IDE simple setting problem

Hi,
Recently we switched to JDeveloper from Visual Cafe .I have a simple setting problem.How can I set the options so that IDE gives, the core java classes and packages,and our application classes and packeges, prompts in imports as well as in code.Where to set the options.
eg: when I write
import java. it should prompt all the pakages.
Thanks in advance.
-Gopal
null

I am not sure I understand what you are requesting, but ...
You can configure JDeveloper projects to include various libraries by default.
This is done by selecting menu Tools | Default Project Properties.../ Libraries tab.
You should define a library for your classes.
You can import any of the packages / classes from all the libraries which your project includes.
It would be incorrect for a tool to automatically add a bunch of import lines at the top of every file because each file should import what it needs and just as importantly, not import what it does not need depending on the component type (e.g. a servlet should not include javax.swing.* ).
An easy way to import elements into JDeveloper is to type in something like:
import java.
// and then type in Ctrl Space
and this launches the package browser, you can select packages or classes to import.
You can also do this at the variable declaratiton point such as typing in:
foo() {
Frame x
// Press Control Alt Space
and this will correctly change the type (Frame) to the type you select in the package browser and add the import statement.
-John
null

Reflection function is not working, unable to click on it at all. Need help! Setting problem?

Hi all, I seek for your kind expertise advise on my Keynote. Once I've chosen a slide to open, any type of slide at all, my Reflection button or function is unable to be clicked on to perform that function. However, Shadow function facing no problem.
I can see the Reflection button but it's blurred like not allowing me to click on it at all. Is this cause by some software problem? Or setting problem? iWork has just being installed.
Appreciate your expert advice and help!

Thanks Kelly... That's very helpful. Appreciate that very much!
By the way, if I may ask further, do you know how to how to make the animation like Steve Jobs did during his presentation on Ipad or Ipad2 where the "word" will drop from top onto the centre of the slide with effect or sort of like smoke or dust floating off and dissolved at both sides of the "word"?
Will be more than grateful to be hear from again! Cheers and thanks again.

Oracle 8i us7ascii character set problem - help required urgent.

Hi frnds,
I have a oracle 8i database server installed on sun solaris os. The database character set is us7ascii. In one of the tables TIFF images are stored in a long column. I m trying to fetch these images using oracle 9i client and visual basic(oracle ODBC drivers). But i m unable to do so. I can not fetch special characters.
Is it because of the character set problem? but when i run my code on the server itself, i m able to fetch the images. I tried to fetch the images using oracle 8 i client on windows XP machine but could not do so. Are there any special settings that i have to do on the client side?

Indeed, it's an ODBC issue. Read this statement from Oracle:
From ODBC 8.1.7.2.0 drivers onwards it's NOT possible any more to
"disable" Characterset conversion by specifying for the NLS_LANG
the same characterset as the database characterset. There is now
ALWAYS a check to see if a codepoint is valid for that characterset.
Typically you will encounter problems if you upgrade an environment
that has NO NLS_LANG set on the client (or US7ASCII) and the database
was also US7ASCII. This incorrect setup allowed you to store characters
like èçàé in an US7ASCII database, with the new 8i drivers this is not possible
any more.
Basic problem is the 'wrong' characterset US7ASCII in the database. As long as no characterset conversion happens (that's the case on the unix server), special characters are no problem.
Werner

DB Creation(character set Problem)

HI,
I am in the process of creating new database from the full export dump file which i got from client. In the export logfile i can see,
Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
I am creating the database manually at my site and planning to import that full export dumpfile from the client.
Do i need to create the DB with national character set WE8MSWIN1252 or can i also use character set as AL32UTF8
I want to se the correct character set so that my import doesn't fails because of charactor set problem.
Please help me.
Oracle Version At client site:9.2.0.1
OS :Windows
Oracle Version at my site:9.2.0.1
OS:LINUX
Thank You..

I can't answer your question because of several things.
The first is that all versions of 9i are currently in desupport and it has been years since I've seen one.
But if I was forced to work with 9i I certainly wouldn't do anything at all until I had patched to 9.2.0.8.
My recommendation would be, unless someone else can help you, to try it and see what happens.
Nothing ventured nothing gained.

Oracle character set problem - help reqed urgent !!

Hello frnds,
I have a oracle 8i database server installed on sun solaris os. The database character set is us7ascii. In one of the tables TIFF images are stored in a long column. I m trying to fetch these images using oracle 9i client and visual basic(oracle ODBC drivers). But i m unable to do so. I can not fetch special characters.
Is it because of the character set problem? but when i run my code on the server itself, i m able to fetch the images. I tried to fetch the images using oracle 8 i client on windows XP machine but could not do so. Are there any special settings that i have to do on the client side?

i run my code on the server itself, i m able to fetch
the images. I tried to fetch the images using oracle
8 i client on windows XP machine but could not do so.You able to fetch the image , So it is not because of the character set.
First thing you need to consider is that use certified combination of OS , client and database server only. Check Certify - Oracle's Certification Matrices
Virag

N79 Profile Setting Problem

Similar Messages

Maybe you are looking for