N79 Sound and Picture Quality should be improved l...

I just recently replaced my N82 to a new N79 because I really love the design and features.
One thing I noticed in the MUSIC PLAYER using the same modified equalizer in N82 is that the sound is too bad and horrible. Please do the same programing in N82 V.30 Music Player sound. We'll be expecting that on the new firmware.
Even the picture quality of N79 is not good. Do something about it because I don't want to be frustrated.
Thank you,
RJ
NOKIA N900
PUT AN EQUALIZER IN N900

I agree that the bass is deep compared to the previous Nseries but I noticed that it balances the output of the sound when it reaches the highest peak. Tendency is to lower or balance the sound. I can't bear this. Compared to the my previous N82 music player, the sound is excellent Both bass and treble are clearly defined.
Try to adjust the 53Hz to the highest point which gives the bass sound, you'll notice the automatic adjusting of sound which is to me, very annoying.
Cheers!
25-Nov-2008 10:23 PM
korngear wrote:
Honestly speaking, the sound quality of N79 is vastly improved over the previous models of Nseries like N82, N95, N95 8GB etc. Of course personal opinions about SQ is different but the improvement on SQ of N79/N85 is obvious and significant, and the N96 is now the best of em and a worthy replacement of N91/8GB.
The bass is deep and rich in N79, N85, and N96 considereing all other S60 devices, I tweaked the 8 band equalizer in my N79 to my own preset, the volume is louder, and treble is much clearer.
Message Edited by korngear on 25-Nov-2008 08:24 PM
NOKIA N900
PUT AN EQUALIZER IN N900

Similar Messages

When downloading from a Sony minidisc video camera, the picture is downloading but without sound. Previously, it had downloaded successfully both sound and picture. I have subsequently upgraded to Lion X (10.7.4). Is there some problem with the driver?

When downloading from a Sony minidisc video camera, the picture is downloading but without sound. Previously, it had downloaded successfully both sound and picture. I have subsequently upgraded to Lion X (10.7.4). Is there some problem with the upgrade which is affecting the transfer? Is there a way of resolving this?

When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

HT1551 sound and picture do not match

Certain movies on Netflix, when played, the sound and picture do not match. It looks like a voice over. You see lips move to the wrong voice.

various. I have some of my dvds that i converted plus numerous others bought off itunes store. the problem seems fairly reccurrrent over all videos?

HT201401 when flash is turned to on mode, it never flashes and picture quality is very poor

when flash is turned to on mode, it never flashes and picture quality is very poor

I've tried by turning off flash,
picture quality will be good in daylight.
but
when flash is turned to automatic mode it never flashes in any lighting condition

1.- I´m creating a Muse site which contains videos, photos and sound. All videos, sounds and pictures are located in diferent folders in my PC. Since Muse doesn't organize the project and its files like Dremweaver (all files in a single folder). How can I

1.- I´m creating a Muse site which contains videos, photos and sound. All videos, sounds and pictures are located in diferent folders in my PC. Since Muse doesn't organize the project and its files like Dremweaver (all files in a single folder). How can I manage my site (containing all the media) in order to upload it to a server?
2.- Is there a Adobe Muse community in spanish language?
Thanks for your help
Mauricio444

Kevin is suggesting that you store the projects you create while working through his book in a folder called RoboHelpProjects. It is not where you have to store every project you ever create.That is for the purposes of his book.
RoboHelp initially defaults to My RoboHelp Projects but it's up to you whether you do. Generally on the forums we advise against that as it is part of your profile and can result in excessively long path names in a few cases. Generally where authors create file names that are so long they almost serve as the content.
Projects always have a root folder, call them Project 1 and Project 2 for this purpose. You can have those folders directly off your C drive (or other local partition) or within in a parent folder as above.
Now to what you can and cannot do. You can delete a whole project by selecting Project 1 or Project 2 in Windows Explorer. Obviously if you delete the parent folder you will delete all your projects within.
What you must not do is delete individual files within a project using Windows Explorer, for that you use RoboHelp's Project Manager. The exception is if you go to Tools > Reports there is a report Unused Files. Files listed there will have to be deleted using Windows Explorer for the very good reason they do not appear in Project Manager and, therefore, cannot be deleted that way.
If you think about it, it is similar to Word. There is no option to delete a document there other than using File > Open and right clicking. Not very intuitive.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

I have a big project but when im going to add a new clip with sound and picture in picture its only the sound that works. Can someone please help me?

I have a big project but when im going to add a new clip with sound and picture in picture its only the sound that works. Can someone please help me?

Also, if you can't get them to work, what is the error message you are getting?
Baron Samedi

I am having trouble keeping the quality of my video when exporting to my external drive. I change the kind to "original" but when I view the video from the external drive once exported, the sound and picture are distorted.

I am having trouble keeping the quality of my video when exporting to my external hard drive. I have tried to export from iphoto with changing kind to "original" but when I open the video from the external drive the quality is effected. I have also tried copying the video to my desktop and then dragging and dropping onto the drive...same problem. Any suggestions? I would like to save everything to my external drive so that I can delete all of iphoto library and then reimport to correct a few things.

The file sizes are identical. In the finder I did a search for all .mov files. Then when they came up, I went through them and named each one so that they would be easier to find. I am a new mac user and am used to windows. I realized later that I should not have done this....with a mac files should be named within iphoto app...not finder....When I went to open the videos in iphoto, it wouldn't allow me. I had to go into finder, copy to desktop and reimport into iphoto. Then the videos worked again. However, I had the problem with the poor video quality when copied to external drive before that. Actually the first problem I had was when I copied to ext drive...videos were copying as an image...so I learned that you have to change "kind" to original before exporting....then that problem was solved...now they are videos, not images but not of a great quality. Skips, sound and images are not in sync...etc...

HDMI into Amp not Working and & Picture Quality Is...

Hello all,
I'm a first time user of the BT Vision+ service and got it all hooked up today. My kit is a Samsung UE55D8000 with Onkyo HTX22HDX amplifier.
Over the years I've had multiple Virgin V+ boxes, Xbox's, Playstation's and PC's plugged into my amp without any problems but the Vision+ box refuses to work. When I plug in the power on the Vision+ I see an initial light blue screen with a boot count number on the bottom left and then it goes blank and I get a no signal message on screen. When I plug the HDMI cable directly into the TV I get a working picture.
I've tried resetting all devices, setting picture between 1080 and 720 but all without any luck.
Has anyone else seen this before?
On a side note, so far I'm not that impressed with the picture quality. Even the freeview HD channels come out noticably worse from the Vision+ box then when I just use my builtin freeview HD. Having moved from Virgin HD, I can see the BT Sports HD channels suffer the same fate with noticale artifacting.

1. Yes - The Vision 2.0 HDMI output does carry 5.1 surround sound when available and should work with any A/V amp. 5.1 is available on some Extra TV channels and we hope to enable more channels for 5.1 soon. The on-screen TV Guide indicates which programmes carry 5.1 surround sound.
2. Freeview HD channels are delivered via Multicast across the broadband network as the box has a DVB-T tuner and not DVB-T2 which is required to receive HD broadcasts in the UK. (Although customers in Norther Ireland can actually receive some HD broadcasts from Eire via DVB-T).
The HD picture quality on the multicast Extra TV channels is generally regarded as excellent and as good as, if not better than, other HD services in the UK as BT use very good video encoders and a high bit-rate.
BT TV Expert
I am a BT Employee and an expert on TV queries. I am here to give advice primarily on the BT Vision+ box. Go Here for more info.
If my post has been helpful, please click on the Ratings star on the left-hand side of the post.

HD DVR QIP 7216-1, sound and picture issues.

Just got fios yesterday, and i am very pleased with picture quality. although right from start, i had issues. First off, I run the HDMI cable right into my receiver Onkyo TX-SR606 and then from there into my TV. Well, i saw a green screen. No big deal, just ran the HDMI straight into the tv, but it kinda defeats the purpose of having a pretty good receiver. Second issue, and its very very annoying, there is a slight pop or crack in the sound, only coming out of the front speakers. its very very low, but i can hear it, its not the speakers, because when i play ps3 or dvd no pop or crack. and you really hear when a commercial changes. i have an optical cable running from box to receiver. Any help to these issues would be appreciated.

not true. I also have an Onkyo 606 with a 7216, and I also get the same green screen after 20 secs, the problem
is with the 7216 HDMI comms and Verizon need to fix it.
The 606 is one of the biggest selling reveivers out there, and the fact that Verizons 7216 is incompatible is ridiculous.
Cheers!
Arthur

Sound and picture did not match?

After recording the presentation it was OK and I could show it. But the fourth time I would show the presentation the sound and animation did not match the pictures? t.i. Keynote did not move to next picture (e.g. I was in picture No. 3 and it shoud move to next picture 4 but it doesn't - and the voice to the next picture No. 4 started continued in picture 3)
Why does this happened? Is Keynote not reliable?

If sound files and images are placed on the slide and timed using Inspector > Builds they will maintain the timing.
I have suggested to do that instead of using the recording feature built in to Keynote which has proven to be unreliable with large numbers of slides and longer voice overs.
Switching to using builds will eliminate these errors.

How can i secure my phone from phornographic videos and picture,what should i do

I dont want phornographic videos and pictures to be viewed on this phone,please help me lock my phone when somebodyelse will be viewing phornography without making a password

hello, if you control the wifi network then you might try a solution like:
http://blog.opendns.com/2012/01/12/opendnss-free-parental-controls-protects-your-ipads-kindles-and-mobile-devices-too/
https://support.opendns.com/entries/42848890-Android-Configuration-instructions-for-OpenDNS
for filtering on a mobile connection you will have to contact your network operator to see if there are any options available...

How do u send or foward muti media messages with sound and pictures

How do you send or forward a multi media message with both sound and pictures

GarageBand does not have a "Normalize" feature (that's what you're friends are talking about).
iTunes has "Sound Check" which performs that function, however I've never used it and have always been under the impression that it just affected playback within iTunes. Perhaps this is not the case, you'd have to experiment to see if it affected the audio transfered to CD.
Many Audio Editors have a Normalize function, so you might take a look at one of them:
http://www.thehangtime.com/gb/gbfaq2.html#audioeditors

When opening the project at a new computer, the sound and picture doesn´t match

We are editing a documentary and when we open the project at a new computer the sound and clip doesn't match. We have noticed that the problem is that if we have a clip named 0001 on one SD card, it takes the sound from another SD card where the clip also is named 0001. Since we are working with a lot of material and this has happened on almost every one of them, its a huge problem, since we got no time to reimport and redo every clip. Thankful for your help.

Try batch renaming some of the files.

Video sound and picture on tv.. question about burning to DVD

Hi
I finally got the picture to show up on the TV. I went into video, settings and turned on the TV out setting. Now I wonder if I can burn the itunes shows I bought onto a dvd?
Will this be a backup copy incase my computer dies or will I be able to watch this on a dvd player too?
Anyone know if I should put the shows on a dvd and if I can watch them on my dvd player then?
Thanks

Frequently asked questions about viewing and syncing video with iTunes and iPod
"Can I burn iTunes Music Store Videos to DVD?
You can save your iTunes Music Store movies to data DVDs for backup purposes (if you have a supported DVD burner), but these DVDs will not play in a DVD player."

HT3209 sound and picture not in sync

when i play a downloaded movie, the sound is not in sync with the scene. why is this happening and how do i fix it? i have tried shutting down and restarting my computer but that doesnt help

Try (free) Quicktime Broadcaster and see if it improves the sync. Is it out of sync from the first second or after a long period of time?

N79 Sound and Picture Quality should be improved l...

Similar Messages

Maybe you are looking for