N79 system error when opening N-gage

hi guys,
i tried to open my n-gage but it not only will not open, it also displays a 'system error' message. do you guys know why this is and how i can fix it? i believe this only happend after i updated my phone software 3 days ago. this is the first time ive tried opening n-gage since.
thanks!
K
Message Edited by weiche on 19-Feb-2009 11:40 AM

Have you tried reinstalling ngage?
You can get it here:
http://www.n-gage.com/ngi/ngage/web/g0/en/get_ngage/devicespecificdload/download_n79.html

Similar Messages

Error in Local Message System: Error when opening an RFC connection Message

Hi Gurus,
We are not able to create support messages in our ECC production system but it can created in Development and Quality. Support message created appears in solution manager system. ECC System displays error message as
Error in Local Message System: Error when opening
an RFC connection Message was Not Created
I have checked RFC connection between ECC and Solution Manager which displays following message
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: partner "local:sapgw00' not reached
Error Details     LOCATION: SAP-Gateway on host local / sapgw05
Error Details     DETAIL: NiPConnect2
Error Details     CALL: connect
Error Details     COMPONENT: NI (network interface)
Error Details     COUNTER: 40142
Error Details     ERROR NUMBER: 10060
Error Details     ERROR TEXT: WSAETIMEDOUT: Connection timed out
Error Details     MODULE: nixxi.cpp
Error Details     LINE: 2835
Error Details     RETURN CODE: -10
Error Details     SUBRC: 0
Error Details     RELEASE: 701
Error Details     TIME: Wed Jan 11 23:26:54 2012
Error Details     VERSION: 38
Kindly Help.....

Hi
Based on the instance number of the servers, you can determine the gateway to be used.
IF your ECC instance number is , 01 then gateway would be , sapgw01 (in ECC system)
So check and change the settings accordingly, in the RFC connection. Also check, if this entry sapgw01 is made in /etc/service file. Also check, in transaction smgw for gateway parameters.
Hope this info helps,
~ Raj

Abort system error when opening the BEx query

When runing the Bex query I get this error
' SQL Error 1578 - Abort system error in program SAPLRRKO and form RSRDR;SRRK0F30_01_'
Diagnosis: Internal error is a targetted termination since the program has an incorrect status.
Please advice me how to correct this issue.
Thanks in advance.
Taj

Hey,
Thanks for your answer , I assigned a points to you. still I need more info on this then what to do further.If this was caused due to program error then what I have to do.
Version: 3.50, Package :SAPak35012 .
Please let me know is this something basis needs to take care of this? .
Looking forward to hear from you.
Taj
Message was edited by: Tamkris Taj
Message was edited by: Tamkris Taj

No mountable file system error when open dowloaded dmg

I was provided a link to dowload Fireworks CS3 for Mac. The link allowed me to connect to the adobe ftp server and downloaded a 1.1MB dmg for Fireworks for Mac. However, when I attempt to open the file I get the following error: "The following disk images failed to mount, no mountable file systems". Note the file size seems too small for the full program, but I have downloaded it twice with no error messages on downloading and same file size.
Previously posted under Fireworks but no responses....any ideas?

You have an incomplete file. there is no way that a 1.1MB file could contain the app Fireworks. redownload the complete file and it will mount.

N85--system error when i open n-gage!

wat shud i do now? just a day back i got n85 and it says system error when i open the n-gage application.. so i deleted it!!
now what??
What's Worth Doing, Is Worth Doing Well!
All "N-series" are incredible!

the problem still persists... can anyone has the relevant experience to help in this matter.. i emailed nokia, their solution did not work too...
What's Worth Doing, Is Worth Doing Well!
All "N-series" are incredible!

System error when trying to open Ngage?

It was working up until today. Now I just get "system error" when I try opening it. I have tried installing n gage again and even deleting n gage but still the same problem.
Any ideas?

04-Nov-2008 11:01 PM
liam182 wrote:
lucky just found answer in time was about to re install phone memory. All because of one little router character
see here
http://zomgitscj.blogspot.com/2008/11/n-gage-system-error.html
Good to know my blog was of help to you
Mobile News, Reviews and More : http://UnleashThePhones.com/

I have a system error when trying to open my itunes on my laptop. Should I unistall and reinstall itunes?

i have a system error when trying to open my itunes on my laptop. Should I unistall and reinstall itunes?

The first error comes when i open my laptop:
APSDeamon.exe - System Error
The program cannot start because MSVCR80.dll is missing from your computer. Try reinstalling....
when I try to open Itunes, it says:
iTunes.exe
iTunes was no installed correclty, please re-install itunes
Thanks!
Annabel

Error When Opening Any Form

Hi All.,
Im facing some issue while opening any form..its stuck in below mention file while opening any form i tried all the ways still im not able to fix the issue.
Application:11.5.10.2
OS-----------HP-UX
DB-----------10.2.0.4.0
File Name:
oracle/forms/ui/FLWTextArea
Work Around
Relink the all the files
Regenerated the jar files
Regenerated the forms
f60gen help=y
Forms 6.0 (Form Compiler) Version 6.0.8.28.0 (Production)
Forms 6.0 (Form Compiler): Release - Production
(c) Copyright 1999 Oracle Corporation. All rights reserved.
PL/SQL Version 8.0.6.3.0 (Production)
Oracle Procedure Builder V6.0.8.21.0 Build #0 - Production
Oracle Virtual Graphics System Version 6.0.5.39.0 (Production)
Oracle Multimedia Version 6.0.8.25.0 (Production)
Oracle Tools Integration Version 6.0.8.17.0 (Production)
Oracle Tools Common Area Version 6.0.5.32.0
Oracle CORE Version 4.0.6.0.0 - Production
Metalink Doc id
java.lang.NoClassDefFoundError: oracle/forms/ui/FLWTextArea Error When Opening Any Form [ID 1219663.1]

Thanks,
From the below doc id we are currently in patch set 19 but im not able see that in ad_bugs.,
Note: 232313.1 - Information on Previous Versions of Developer 6i Patchsets
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=232313.1
Here is an example:
If you have Forms: 6.0.8.27.x --> You are on Developer 6i Patch 18
If you have Forms: 6.0.8.26.x --> You are on Developer 6i Patch 17
If you have Forms: 6.0.8.25.x --> You are on Developer 6i Patch 16
If you have Forms: 6.0.8.24.x --> You are on Developer 6i Patch 15
SQL> select bug_number from ad_bugs where bug_number='&BUG_NUMBER';
Enter value for bug_number: 9935935
old 1: select bug_number from ad_bugs where bug_number='&BUG_NUMBER'
new 1: select bug_number from ad_bugs where bug_number='9935935'
no rows selected
SQL>

Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679

Hi,
We update the BW landscape for version 7.4 suppport package 4 (whitout HANA).
We use a external system connection to extract data from a SQLServer database (Microsoft Connector 1.1 for SAP/BW)
In the previous version (BW 7.0.1 SP 10) run correctly, but now is in error.
Below the BW error log:
Error: COMMUNICATION_FAILURE with function RSB_API_OHS_3RDPARTY_NOTIFY and target system SQLIS.
Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679 Transaction program not regist).
Error log of Integrations Services
[SAP BI Destination 1 [476]] Error: Microsoft.SqlServer.Dts.SapBw.Connectivity.ERPException: An error occurred during the dispatch of the incoming function. The last return code was "RFC_FAILURE".
em Microsoft.SqlServer.Dts.SapBw.Components.SapBwSourceBWLoader.ProcessInput(Int32 inputID, PipelineBuffer buffer)
em Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper100 wrapper, Int32 inputID, IDTSBuffer100 pDTSBuffer, IntPtr bufferWirePacket)
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "SAP BI Destination 1" (476) failed with error code 0x80131500 while processing input "SAP BI Destination Input" (491). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
I checked the topic and notes below, but without success
CPIC Return Code 679 - Transaction Program not Registered - ABAP Connectivity - SCN Wiki
Note 1480644 - gw/acl_mode versus gw/reg_no_conn_info.
Note 353597 - Registering RFC server programs
Regards,
Bruno

Hi Bruno,
We were able to resolve the issue. SAP RDS is assisting us with our upgrade and one of their consultants gave us this fix/workaround.
Edit and add an entry into P:\usr\sap\<SID>\DVEBMGS00\data\reginfo.dat on your BW host server.
Below is the entry I added.
P TP=<NAME OF PROGRAM ID> HOST=<remote hostname where you creating the RFC to> CANCEL=<remote hostname> ACCESS=*
P TP=CTSAPNPSCI_PORTAL_FPS HOST=ctsapnpsci CANCEL=ctsapnpsci ACCESS=*
Then in BW system goto smgw > goto > Expert Funtions > External Security > ReRead ACL (N) & Globally
I hope that this works for you.
Regards
James

Error when opening an RFC connection (LB : Hostname or service of the messa

Hi All,
Im trying to transport datasources in BW, they are 7.x RSDS datasources. but we did not change the source system, it was existing and we are using the same source for older BW version. we now installing new BW 7.x system.
These transports went fine in BQ system but failing in BP system with the below error :
Error when opening an RFC connection (LB : Hostname or service of the message ser
Error when activating DataSource 2LIS_17_I0NOTIF RP1CLT100
Error when opening an RFC connection (LB : Hostname or service of the message ser
Error when resetting DataSource 2LIS_17_I0NOTIF RP1CLT100 to the active version
the datasource 2LIS_17_I0NOTIF is active in RP1CLT100 system. when this transport goes to prod it tries to overwrite the existing one, as there are no changes to the datasource the structure will be the same.
but after that it cant able to activate that datasource.
so my question is can we able to activate this datasource in RP rather than doing transport again from R/3 Dev---R/3 PRD.
i tried RSDS_DATASOURCE_ACTIVATE_ALL but it doesn't help.
another question is when we migrate from 3.x datasource to 7.x, does this change any metadata in R/3 system as well.
Best Regards
Robyn.

Hi Rizwan,
Looking at the error message it seems like there is some issue with RFC connection and whatever objects you are trying to move are not reaching to target system. Just have a check with basis team.
Once you migrate DS from 3.x to 7.0 yes there will be some meta data changes e.g. the DS type will be changed from ISFS to RSDS. You will have to send the migration along with current data source.
Regards,
Durgesh.

Error when opening an RFC connection in IDT

Hi Experts,
I m trying to create a relational connection (JCO) from IDT to BW 7.4, and I m getting the following error:
Error when opening an RFC connection (CPIC-CALL: ' ThSAPOCMINIT', communication
I searched this error in Internet and I found many discussions about it ...And I think it's about autorizations in BW system that by default dosen't allow external servers to connect to it.
So, I changed the values for the following parameters in RZ11 t-code:
gw/acl_mode = 0
gw/reg_no_conn_info = 0
But I still get the same error ...When I checked the SM59 t-code I found that IDT create an entry in TCP/Ip connections ...
Can you guide me to solve this issue...
BW server is 7.4 version on AIX OS
BO server is 4.1 SP05 on windows system
Thank's a lot for your help.
Abdess,

Hi,
test the RFC connection in sm59.If it is sussecfull then try to create conneciton otherwise see the error message.
Amit

Error when opening table container file keydb read only

Hi Guys,
We are installing solution manager 4.0 on windows/sql but we are getting following error and couldnt continue the installation
FKD-00070 Error when opening table container file C:\PROGRA1\SAPINS1\SOLMAN\SYSTEM\MSS\CENTRAL\AS\keydb.xml for writing. Possible reason: "read-only"
ERROR 2008-06-04 20:10:56.843
FKD-00049 XML - Parser error: error: no DTD specified, can't validate in line 1, 1
in file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\keydb.xml.
Please help
Regards,
Santosh

Further info
keydb.xml is empty and the directory has got write access for everyone
regards
Edited by: Santosh Keerti on Jun 4, 2008 1:29 PM

STMS: RFC error: Error when opening an RFC connection

Hello ,
I was wondering if you could help me with this TMS issue.
The transport system is not working properly.
The fallowing error is shown:
Could not start transport control program tp
RFC error: Error when opening an RFC connection
There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
Error code: 3
RFC error text: Error when opening an RFC connection
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
System Response
The function terminates. Details about the error can be found in the trace file of the Gateway Monitor (SMGW).
Procedure
Contact your system administrator or use report RSTPTEST to localize the error. You can then execute the command again.
When I test the tp tools:
tp Call and RFC Ping: Error when opening an RFC connection
Another thing would be that when testing the RFC connection CALLTP_Linux I have the error:
ERROR: user XXX is not authorized to start TP /usr/sap/SID/DVEBMGS53/exe
And I have to say that the user has maximum authorizations.
I also checked the permissions of the tp at OS level but everything seems to be ok.
Can you help me with this?
BR,
Manoliv

Dear Manoliv,
Firstly please check if you have enough space in /usr/sap/trans file system.
If OK, please run RSTPTEST report from SE38 and check the log file in SMGW => Goto => Trace => Gateways => Display file
and paste the log here.
Also, I assume filesystem permissions are OK.
Regards,
Sujit.

Distribute System - Error when run tcode DB13 - Job Log - Cancel

i have two server and I installed SAP ERP 6.0 (Application ABAP) on two server base on Distribute System model
Server A : I installed Global Host Preparation and Central Instance
Server B : I installed Database Instance
On server A, I exported /sapmnt, /usr/sap
On server B, I mounted /samnt, /usr/sap from Server A
Process Installation -> OK
and finally , I logged in SAP through server A -> OK
But when i run tcode DB13 to run Action Pad : Cleanup Logs, Check and Update Optimize Statistic ....etc -> Cancel
-> with error in tab Job Log below
20.01.2010     14:37:07     Job started
20.01.2010     14:37:07     Step 001 started (program RSDBAJOB, variant &0000000000041, user ID BASIS)
20.01.2010     14:37:07     No application server found on database host - rsh/gateway will be used
20.01.2010     14:37:07     Execute logical command BRCONNECT On host sapree2
20.01.2010     14:37:07     Parameters: -u / -jid CLNUP20100120143706 -c -f cleanup
20.01.2010     14:37:29     SXPG_STEP_XPG_START: is_local_host: rc = 403
20.01.2010     14:37:29     SXPG_STEP_XPG_START: host = sapree2
20.01.2010     14:37:29     SXPG_STEP_XPG_START: is_local_r3_host: rc = 802
20.01.2010     14:37:29     SXPG_STEP_XPG_START: RFC_TCPIP_CONNECTION_OPEN: rc = 1003
20.01.2010     14:37:29     SXPG_STEP_COMMAND_START: SXPG_STEP_XPG_START returned: 1.003
20.01.2010     14:37:29     SXPG_COMMAND_EXECUTE(LONG)
20.01.2010     14:37:29     <timestamp> = 20100120143729
20.01.2010     14:37:29     COMMANDNAME = BRCONNECT
20.01.2010     14:37:29     ADDITIONAL_PARAMETERS = -u / -jid CLNUP20100120143706 -c -f cleanup
20.01.2010     14:37:29     LONG_PARAMS
20.01.2010     14:37:29     OPERATINGSYSTEM = ANYOS
20.01.2010     14:37:29     TARGETSYSTEM = sapree2
20.01.2010     14:37:29     DESTINATION
20.01.2010     14:37:29     SY-SUBRC = 1003
20.01.2010     14:37:29     SXPG_COMMAND_EXECUTE failed for BRCONNECT - Reason: program_start_error: For More Information, See SYS
20.01.2010     14:37:29     Job cancelled after system exception ERROR_MESSAGE
and then , I checked tcode SM59 -> TCP/IP Connection -> SAPXPG_DBDEST_SAPREE2 -> Test Connection -> not OK with error
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: timeout during allocate
Error Details     LOCATION: SAP-Gateway on host sapree1.reecorp.com / sapgw00
Error Details     DETAIL: no connect of TP sapxpg from host sapree2.reecorp.com after 20 sec
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 22
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 1973
Error Details     RETURN CODE: 242
Error Details     SUBRC: 0
Error Details     RELEASE: 701
Error Details     TIME: Wed Jan 20 14:42:39 2010
Error Details     VERSION: 2
thanks for your advice

Hi,
For installation you can refer the standalone gateway installation guide available under http://service.sap.com/instguides
For operating the standalone gateway you can use the below link
http://help.sap.com/saphelp_nw04/helpdata/en/bb/9f13194b9b11d189750000e8322d00/content.htm
Cheers.....,
Raghu

FM GUI_UPLOAD gives PC036 "Error when opening the download file".

Dear all
I'm having a problem with a particular PC.
A program which calls FM GUI_UPLOAD gives the error PC036 "Error when opening the download file".
The file we are trying to upload is a text file, with tab delimiter.
If the same user executes the same program from another PCs, it works fine.
If another user executes the program in the "problematic" PC, it gives the error.
So, the problem is PC-related.
I checked SAP GUI Codepage, and was the same as other PCs.
I cheched regional configuration, and was also the same as other PCs.
The operating system is Windows XP, and the SAP GUI version is 7.10, File version 7100.2.7.3077, Build 967944 , Patch level 7.
SAP version is ECC6.
I searched across forums, SAP note, and the web, but I couldn't find anything.
I would be grateful if someone could give me ideas.
Thanks in advance
Jordi

Hello. The user accounts are have same privilegies (like both are "Power users")? Also the file system are the same in both PC NTFS or FAT32 (today i'm find FAT32 in enterprise ) If NTFS may be some Domain politics are not allow to save file correctly, or space are not enough....Try check this first...Regards.

N79 system error when opening N-gage

Similar Messages

Maybe you are looking for