N79 Unable to perform Bluetooth Operation

My 5 months old N79 developed a very annoying problem 3 days ago as it kept on giving me 'Unable to perform Bluetooth Operation' each time I tried to swith the Bluetooth on, Also the FM Radio refuses to power on too. I'm just so disturbed with these two problems as I'm so confused of what to do now.
I've tried the possible means I knew - Hard reset, formatting, (even up to times) I've also re-installed the firmware with NSU, all to no avail
I'm patiently awaiting responses towards getting rid of this ugly problem on my phone. th
Thanks in advance
Below is an attchment of the error that comes out each time I tried to power on the Bluetooth
Attachments:
Error.jpg ‏22 KB

From the screenshot you have attached, it seems your 3G is working simultaneously... also there seems a USB connection too.. Remove the USB.. disconnect from 3G and then see if you are getting the same error...
If its no more then next connect the 3G and try again... If now its working then the USB and Bluetooth activation togather is the problem..
Keep posting your feedback..
--------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

Similar Messages

Unable to perform Bluetooth operation

when I try to switch on my bluetooth module . it says that unable to perform th bluetooth operation.
Please help I tried resetting the phone it didn't worked. please provide me a solution for the problem I am facing
I am totally **bleep** off by giving my mobile for service center If I give the mobile to service center it will be 4th time and every I get new problem.. really these nokia phone sucks...
Please help in solving this problem..

@ kingblue -
Having the same problem on my Nokia 5800xm. When I try to Activate BT in the phone it says 'Unable to perform Bluetooth Operation'.. some of the threads mention that if the Bluetooth Device Address is displayed when *#2820# is dialled then its a Software problem ..not a Hardware issue (IS IT CORRECT ???) . As its being displayed on my device..thinking that the issue is only Software related, I Re-installed the previous version (v 52.0.007) without success. Even the latest firmware update (v 60.0.003) is of no help..
P.S. when the problem started a few days back.. the BT got activated after a FEW tries 2-3 times.. but after that no luck..-

I get "unable to perform bluetooth operation" afte...

Hi,
I just completed a software update on my N70 hoping to fix an issue with the image gallery crashing with a large amount of images. My original firmware version was 3.x something which is what came on it when purchased. And was updated to 5.0705.3.0.1 30-01-07 RM-84
The installed said it was successful although it did loose connection to the phone during it and I was told by the app that I should remove the battery and click on continue, which i did. Seemed to get it going again.
Anyway the problem is now I cannot connect to the phone via PC suite or turn on bluetooth. The phone seems to work connecting to the carrier.
What is the issue? Is this software update faulty? How can I get my phone working again?

@ kingblue -
Having the same problem on my Nokia 5800xm. When I try to Activate BT in the phone it says 'Unable to perform Bluetooth Operation'.. some of the threads mention that if the Bluetooth Device Address is displayed when *#2820# is dialled then its a Software problem ..not a Hardware issue (IS IT CORRECT ???) . As its being displayed on my device..thinking that the issue is only Software related, I Re-installed the previous version (v 52.0.007) without success. Even the latest firmware update (v 60.0.003) is of no help..
P.S. when the problem started a few days back.. the BT got activated after a FEW tries 2-3 times.. but after that no luck..-

NOKIA E90: UNABLE TO PERFORM BLUETOOTH OPERATION

Hi guys,
It's two weeks since, I'm having problems with my Nokia E90 mobile phone: when I try to activate my bluetooth, after a few seconds I receive the message "Unable to perform bluetooth operation", but this doesn't work in this way permanently because some times works and some times doesn't work, it occurs trying to connect to my vehicle free-hands device or even just activating bluetooth.
I can't understand what's happening because til now my bluetooth device worked fine.
So, could anybody help me? because now I'm working with my USB connection, but this is not very operative.
Thanks in advance!!!

01-Jun-2008 02:26 PM
erikpost wrote:
Exactly the same problem over here:
-FW 210.34.75 newly installed
-No paired devices listed
-Device is set visible
When trying to switch on Bluetooth, the error message above keeps appearing.
Reset to factory settings (using *#7370#) doesn't give any improvement.
In short: BT has become useless after the FW update.
Any suggestions to resolve this problem will be greatly appreciated.
Thanks in advance,
Erik
i heard the 210 sw is only a beta software and is for testing only... it could be causing you the problem...

N82 UNABLE TO PERFORM BLUETOOTH OPERATION

HAVE A N82 FOR ABOUT 6 MONTHS. I HAD PERFECTLY CONNECT MY PHONE WITH MY LAPTOP (MICROSOFT OUTLOOK ...) AND A BH-902 WIRELESS BLUETOOTH DEVICE UNTILL YESTERDAY.
I HAVE LOST CONNECTIVITY WITH THAT TWO "RELIABLE" DEVICES.
I TRIED TO RECONNECT THEM FROM THE START BUT I KEEP HAVING A MESSAGE IN THE BLUETOOTH FUNCTION SAYING "UNABLE TO PERFORM BLUETOOTH OPERATION" AND IT STAYS UNACTIVATED SO ALL MY TRYINGS KEEP FAILING.
CAN ANYONE HELP ME OUT SOMEHOW WITH THIS PROBLEM?

i have the same problem... with the bluetooth. It just suddenly stopped working
and some more problem... i dont have any warranty since my n82 was only given to me as a gift. i dont have receipt or doesnt know where to get the receipt.
there have been quite a number of posts with regards to n82 bluetooth crashing after an update. Im not sure why mine crashed. I need some help here....
I have read in some posts that its a bluetooth chip default. Some bad batch.
wont nokia fix this for free? it aint my fault they installed a faulty bluetooth chip. its sounds so unfair

N97 - unable to perform bluetooth operation

Hi,
for some reason my bluetooth stopped working. As you see I got this message when trying to turn it on: unable to perform bluetooth operation.
I've tried to hard reset the phone, restore factory defaults, I've even flashed it with new firmware even though it was the latest installed. (11.0.021)
Is there anything I can do to fix this?
Thanks in advance.
ex N97 20.0.019 owner
Happy iPhone owner with ALL features actually working :]

I come to use the Bluetooth. ( The Same as Everybody Else!!!!!!)
It won’t switch on! Unable to perform Bluetooth operation. It keeps coming back with.
Other things I’ve tried:
Taking a photo & Song and send via Bluetooth. It ask me: Bluetooth is currently switched off. Switch on? So press Yes. Comes back with: Unable to connect!
Done Factory Reset!
Even tried taking sim out. This gets you a little further, But when you press Yes it Freezes the Phone!
I’ve updated the software:
Software Version
V 20.0.019
Software Version Date
13-10-09
Custom Version
20.0.019.C01.01
Custom Version Date
13-10-09
Language set
38
Model
N97
Type
RM-505
But to no avail same thing.
Please can someone help me resolve this problem or give me a fix.
I’ve always had Nokia. I’m beginning to rethink.
Many regards

E51 Unable to perform bluetooth operation.

Hi Team,
I am a proud owner of Nokia E51 from last one year,i am facing issue in turning on the bluetooth from past few day .
Whenever i try to turn on the bluetooth it gives an error message "Unable to perform bluetooth operation."
I tried both soft and warm reset also even after formating the phone it is not working,please help me.
Current software version is 220.34.37.

Hi Team,
I am a proud owner of Nokia E51 from last one year,i am facing issue in turning on the bluetooth from past few day .
Whenever i try to turn on the bluetooth it gives an error message "Unable to perform bluetooth operation."
I tried both soft and warm reset also even after formating the phone it is not working,please help me.
Current software version is 220.34.37.
tell me any option
MODERATOR'S NOTE: E-mail address was removed. It is unwise to publish personal contact information on a public forum.

5800: Unable to perform Bluetooth Operation

Hi, on my Nokia 5800 I always get the message 'Unable to perform Bluetooth Operation' when trying to turn on Bluetooth. I I already tried several proposed solution, without succes unfortunately.
* Remove battery
* Hard reset
* Soft reset
* hit it on the side as proposed somewhere in the forum.
I raised a request through Nokia support a week ago. They promised to contact me withing the 48 hours, but I have't heard anything from them.
I have fw: 30.0.011. Altough Nokia site says there is a newer version I cannot update my phone yet (tried via Nokia update on PC and on mobile itself)
Any suggestions on how to solve this?

Guys, I´m sorry to be the one to break it down to you, but it seems the culprit for this problem is a virus.
I know it sounds farfectched but I had the same problem, I did a lot of research and in an spanish board someone mention that if you had made a backup of the whole phone with PC suite from before the problem with teh bluetooth arise, then restore it and that the bluetooth functionality would be back, he went on to say that this virus erased files vital to the bluetooth operation. So I went on and did the restore, and lo and behold, bluetooth is back!!!! but he also warned not to be very happy as he said the virus still looms in teh cell and that it will erase the files again taking the bluetooth with it.... I did the restore 1 hour ago, and I still have the bluetooth working.
Lets hope it remains that way.
Please let me know if this works for anyone else and how long it lasts.
Cheers,
PICburn

E90: "unable to perform bluetooth operation" messa...

-FW 210.34.75 newly installed
-No paired devices listed
-Device is set visible
When trying to switch on Bluetooth, the error message above keeps appearing.
Reset to factory settings (using *#7370#) doesn't give any improvement.
In short: BT has become useless after the FW update.
Any suggestions to resolve this problem will be greatly appreciated.
Thanks in advance,
Erik

01-Jun-2008 01:19 PM
erikpost wrote:
-FW 210.34.75 newly installed
-No paired devices listed
-Device is set visible
When trying to switch on Bluetooth, the error message above keeps appearing.
Reset to factory settings (using *#7370#) doesn't give any improvement.
In short: BT has become useless after the FW update.
Any suggestions to resolve this problem will be greatly appreciated.
Thanks in advance,
Erik
I have similar problem but started befor updating the software. Now the BT can not be used. Can any one give me a solution for this problem?
Thanks
Bassam

In Printer Services box, i get the message "unable to perform the operation"

HP Officejet H470wbt. Using via bluetooth. i have recently installed a new ink service module and a black toner cartridge. Now I get the following message when trying to view ink levels in the printer services area--"unable to perform the operation"

"Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"<br />
"Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"<br />
<br />
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).<br />
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

In printer services error message says "unable to perform this operation"

when I try to check my ink levels in the printer services area, an error message comes up "unable to perform this operation"
I have deleted and reinstalled my printer. I have downloaded the lastest driver--all to no avail

Please read this post then provide some details. What printer model? What operating system?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

'Service this device' gets 'Unable to perform the operation' Deskjet 6940

Installing this software on several different XP SP2 boxes. The install does fine (although very long) and I can print to the printer. However, when I go to the printer properties and select Preferences and the Services tab, I click the "Service this device" icon and get only "Unable to perform this operation". I get the same results on 3 different computers. I tried installing the software from the CD, both USB connected and network connected. I also downloaded the latest s'ware from the HP site and got the same results.
Any ideas here? Without this function I have no way to clean the print heads and such later on, even though the printing works OK.
The only reference I could find previously by searching said that it happens when running the Firefox browser. I'm not doing that.

After i've set Internet Explorer as default browser it Works !
What a strange solution

VMM is unable to perform this operation without a connection to a Virtual Machine Manager management server.

Hi,
I'm running SCOM and VMM integration. For the most part everything is working. However I get lots of alerts generated in regards to my scvmm server.
This is a the guide I used:
https://technet.microsoft.com/en-ca/library/hh882396.aspx
SCOM + VMM 2012r2 Ur4
One of the Errors(which appears to be root issue):
The PowerShell script failed with below
exception
System.Management.Automation.CmdletInvocationException: VMM is
unable to perform this operation without a connection to a Virtual Machine
Manager management server. (Error ID: 1615)
Use the Get-VMMServer cmdlet
or the -VMMServer parameter to connect to a Virtual Machine Manager management
server. For more information, type at the command prompt: Get-Help Get-VMMServer
-detailed.At line:109 char:12
+ $vmm = Get-SCVMMServer $VMMServer -Credential
$cred;
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
at
System.Management.Automation.Internal.PipelineProcessor.SynchronousExecuteEnumerate(Object
input, Hashtable errorResults, Boolean enumerate)
at
System.Management.Automation.PipelineOps.InvokePipeline(Object input, Boolean
ignoreInput, CommandParameterInternal[][] pipeElements, CommandBaseAst[]
pipeElementAsts, CommandRedirection[][] commandRedirections, FunctionContext
funcContext)
at
System.Management.Automation.Interpreter.ActionCallInstruction`6.Run(InterpretedFrame
frame)
at
System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame
frame)
at
System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame
frame)
Script Name:
GetStorageSubsystemPerfScript
One or more workflows were affected by
this.
Workflow name:
Microsoft.SystemCenter.Advisor.StorageSubsystem.Performance.PerfCollection
Instance
name: SCVMM01.Domain.com
Instance ID:
{B5175EAC-D64D-2553-D567-F19B5C864BBD}
Management group: OMGRP82

Can you connect from powershell? get-vmmserver <VMMServerComputerName>
If this doesn't work it's likely that your VMM server doesn't work. Check Application log to see if there are errors related to VMM service.
You can also collect traces as described
here and attach them to this thread.
Are you using a domain administrator account? (this is the default allowed after SCVMM is installed - until other users are added).
also try restarting VMM server or VMM services once.
this occur if the SQL database owner is indicated as NULL. Try adding the SQL SA account as db owner.
refer this once -
https://social.technet.microsoft.com/Forums/en-US/a4199cb2-ccbf-4bb0-96c1-7a640143f81b/error-id-1615-vmm-is-unable-to-perform-this-operation?forum=virtualmachingmgrhyperv
Thanks, S K Agrawal

"Unable to perform this operation because No enough ram"? Insolent!

Hello,
I use Photoshop CS4 Extended and I don't speak english but..... When using the quick selection tool sometimes gives me the following message "Unable to perform this operation because the available RAM is insufficient." Actually I do not understand because thanks to a software that gives me real-time active memory available, I know that this is largely sufficient (more than 1GB of available). Besides, I need only close the file. psd and I reopen the message to disappear In short .... I do not understand and I find it annoying!!
Best regards,
Ben
Ps: The making of a double q only rarely solves the problem.
Setup: 2 GB of RAM
Xp 32 bit
69% of available RAM memory has toshop or 1200 MB

J'ai installé le sp3 de Xp et le bug semble avoir disparu (j'etais rester au sp2)....

Discussion Forum: Unable to perform the operation: Row was not found using

Hi all,
I deployed the Discussion Forum and it shows the Portlet with "Creating a product ..". Very fine.
I can create a Product. Fine also.
I can fill in a new Thread, but then, when I try to submit it, I get the error:
Unable to perform the operation: Row was not found using request parameter: 000100000004313437380000012A000000F8FE832E94.
When I click Cancel. I see the Overview of the Products. I drill down to the Threads for my Product and the new thread appears on the list. As soon as I click on the Thread in order to read it the following error appears:
Unable to perform the operation: Row was not found using request parameter: 0001000000043134373800000134000000F8FE832E94.
Any help is appreciated,
Michael

You need to set the Login Frequency (while registering the provider) to 'Once Per Session'. This will allow the portlet to track the user transaction state.
Make sure that you do not bounce the oc4j container in between the portlet operations, since this will leave the transaction into inconsistent state.
You have to ensure that whenever you bounce the oc4j container/provider mid-tier you logout of portal and login again.
This will solve the problem.

N79 Unable to perform Bluetooth Operation

Similar Messages

Maybe you are looking for