N7K queries

Dear Team,
we have following queries regarding N7K .
1) How Can we access N7K via GUI .
2) Can we remove switch Slot without shutdown (it is hotswape ? )
3) Shutdown Command to power off Complete N7K ?
4) Access list for permit sepcifc user to use SSH access of N7K remaning deny all .
5)Can we configure Dual DHCP server relay agent on interface ? and how its works ?
Please Suggest & Support for same
Regards
MAK

Hi MAK,
My answers are inline
1) How Can we access N7K via GUI .
-There is no direct GUI on the N7K, however it can be managed via DCNM (Data Center Network Manager). You can find more about it here:
http://www.cisco.com/en/US/products/ps9369/index.html
2) Can we remove switch Slot without shutdown (it is hotswape ? )
-Yes, all modules are hotswapable. Once you press the each ejector lever, the module is disconnected from the backplane.
3) Shutdown Command to power off Complete N7K ?
-There is not a shutdown command to shut down the switch
4) Access list for permit sepcifc user to use SSH access of N7K remaning deny all .
-I don't believe there is a way to do this. The only way to limit SSH access is to apply new policies to CoPP to allow some IPs vs other
5)Can we configure Dual DHCP server relay agent on interface ? and how its works ?
-When you have multiple DHCP relays defined on an interface the DHCP discover and request will be sent to each defined server.
Hope that helps
Chad

Similar Messages

Nexus N7K Sup 1 replacement to SUP2E rollback plan and EPLD upgrad time.

Dear Expert,
My customer has N7K SUP1 with HA as below and I need to replace 2 with SUP2E 6.1.2 from SUP1(6.1.1).
As per Cisco document, it is required EPLD upgrade from SUP1 to SUP2E with Fabric-2 module, but there is no guide time for EPLD.
Mod Ports Module-Type                         Model              Status
1    0      Supervisor module-1X                N7K-SUP1           active *
2    0      Supervisor module-1X                N7K-SUP1           ha-standby
3    48     1000 Mbps Optical Ethernet XL Modul N7K-M148GS-11L     ok
4    48     1/10 Gbps Ethernet Module           N7K-F248XP-25      ok
5    24     10 Gbps Ethernet Module             N7K-M224XP-23L     ok
Mod Sw              Hw
1    6.1(1)          3.0
2    6.1(1)          3.0
3    6.1(1)          1.3
4    6.1(1)          1.0
5    6.1(1)          2.0
1. Can I have no downtime to do this activity ?
As per Cisco HW installation guide, It seems I should replace 2 SUP at same time, but if I can replace separately, please let me know.
2. How many minute is required for upgrade EPLD with above HW inventory ?
I assummed this time about 1hr ~ 90 min(max), is it correct ?
3. If this upgrade is failed, then I need to rollback from SUP2E(S2-6.1.2) to original SUP1(S1-6.1.1).
Is below step is correct for rollback ?
- Turn off the power to the switch
- For each Supervisor 2E module installed in the switch, remove the module and replace it with a Supervisor 1 module.
- Power on and verify all module is fine, sh version to check to rollback to S1-6.1.1.
- Run ‘install all epld bootflash:n7000-s1-epld.6.1.1a.img parallel’ after rebooting with original SUP1.
- Verify configuration and status
4. when I downgrade to n7000-s1-epld-6.1.1a, only linecard will be downgrade > or All SUP and FAN or Power module EPLD also downgrade ?
If so, how many minute will re required with previous HW inventory ?
I assummed this time about 40 ~ 60 min(max), is it correct ?
5. From S1-6.1.1a to S2-6.1.2a upgrade, will N2K FEX Software be upgrade as well ?
I need to update this downtime by tomorrow morning, so I seek your advice urgently.
Please share your experinece with me, thanks in advance.
Jason.

Hey Jason,
Regarding your queries:-
1. Can I have no downtime to do this activity ? As per Cisco HW installation guide, It seems I should replace 2 SUP at same time, but if I can replace separately, please let me know. - Replacing supervisors will have downtime as you need to move hardware physically in and out of chassis.
2. How many minute is required for upgrade EPLD with above HW inventory ? I assummed this time about 1hr ~ 90 min(max), is it correct ? - Once the supervisor is upgraded, you may upgrade all the modules parallely so considering the boot time of all these modules you are in safe limit.
3. If this upgrade is failed, then I need to rollback from SUP2E(S2-6.1.2) to original SUP1(S1-6.1.1). Is below step is correct for rollback ? - Indeed its correct.
4. when I downgrade to n7000-s1-epld-6.1.1a, only linecard will be downgrade > or All SUP and FAN or Power module EPLD also downgrade ? If so, how many minute will re required with previous HW inventory ? I assummed this time about 40 ~ 60 min(max), is it correct ? - Check this:
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/6_x/epld/epld_rn_6-1.html#wp93995. Also everything will b downgraded so again calculate the booting time + downgrade, i think with this inventory 60 minutes is managable.
5. From S1-6.1.1a to S2-6.1.2a upgrade, will N2K FEX Software be upgrade as well ? - Yes, it will be upgraded.
I also suggest the following links for smooth upgrade:
Replacing Supervisor 1 Modules with Supervisor 2 or Supervisor 2E Modules:http://www.cisco.com/c/en/us/td/docs/switches/datacenter/hw/nexus7000/installation/guide/n7k_hig_book/n7k_replacing.html#pgfId-1410535
Cisco Nexus 7000 Series FPGA/EPLD Upgrade Release Notes, Release 6.1: http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/6_x/epld/epld_rn_6-1.html
HTH.
Regards,
RS.

Nexus Queries

Hi,
    I have following Queries in the Nexus. Please help me with information.
•1.       M1, M2 & F2 cards in N7K, which one will be used for Routing & Switching?
•2.       vPC primary Nexus 7K & vPC secondary Nexus 5K. It will support? & why?
•3.       Port-channel between N7K & N2K mandatory to communicate hosts connected to N2Ks?
•4.       By default why VTP mode is Transparent in Nexus Switches? But in IOS by default Server mode.
Thanks
Venkat

When configuring a single sided vPC both switches must be the same model, ie a pair of N5Ks or a pair of N7Ks. With vPC each switch retains its own control plane and data plane. Control messages and data frames flow between the active and standby switches via the peer link.
With double sided vPC you can have a pair of N5Ks and a pair of N7Ks. See the link below for details:
https://supportforums.cisco.com/docs/DOC-20836

Multicast clustering IBM servers with N7K and 2k

     i have two severs IBM are working as a cluster and connected to Fiber fabric extender 2K using VPC as per attached diagram
     two IBM server are woriking fine for network connectivity with N2k but the servers have a multicast named ( power HA 7.1) to work as acluster
      but i tried to configue multicat in N7K and N2k to server working as acluster but the servers are not working
     please advice me about the configuration in N7K and N2k to working IBM servers as a cluster .

One option is the IGMP querier:
config t
ip igmp snooping
vlan 2
switch(config-vlan-config)# ip igmp snooping querier 10.0.10.253
          (or a good source address of the interface)
The other option is run PIM on the VLAN interface:
feature pim
vlan 2
ip pim sparse-mode
Both has the same purpose: combined with IGMP snooping, the L3 interface will flood the VLAN with IGMP queries that traverse the inter-switch links. As a result, the inter-switch links will be included in the snooping port list. In turn,
packets destined to 228.5.10.5 will be sent out the inter-switch link and reach the other server.
Without the IGMP queries, 228.5.10.5 packets will not be sent from one switch to the other as it is not in the 224.0.0.0/24 range.

Could I have CASE or IF statement in FMS queries?

Is it possible to have case statements in FMS queries:
For example:
SELECT T0.[U_DepoistfeeON] case
when T0.[U_DepoistfeeON] is NOT BLANK then $[$38.111.160]='Deposit Fee'
when T0.[U_DepoistfeeON] is BLANK then then $[$38.111.160]=BLANK
end FROM OITM T0
What is wrong with above query please? Thank you very much.
I do not mind even if above query is doable with an IF statement in it.

Hi Rahul, this is what I want -
I have a user defined field attached to item master OITM. The field is called : U_DepoistfeeON
The above field contains additional depositFee taxes for selling beer bottles.
I have also created a new tax as part of Freight handling. While on Sales Order screen, the Freight (unhide first through forms field) drop down can have the new tax type selected automatically "Deposit Fee".
Thus, if the line item is of beer type that has U_DepositfeeON, then Freight field should automaticlally pick the type "Deposit Fee".
If U_DepositfeeON is zero then I would like the Freight field on Sales Order screen ($38.111.160) set to blank.
I tried to achieve this through following using case statement.
select T0.U_DepoistfeeON
from oitm t0
case
when T0.U_DepoistfeeON 0
then $http://$38.111.160='Deposit Fee'
when T0.U_DepoistfeeON = 0
then $http://$38.111.160=''
else
$http://$38.111.160=''
end;
Of course it doesn't work. Note: I know I typed in DepoistfeeON, the error is not due to that.
Thanks.

How to Dene a Data Link Between Queries: Bind Variables

This is an interesting topic and I cannot get it to work using Bind Variables.
I have 2 queries: Q1 and Q2. Q2 needs c_id, account_code and account_type from Q1.
Whe I run the data template below, I get only the data for Q1.
Now people may argue that there is no data in Q2 for the relevant clause. So if I even remove the where clause in Q2 I still get no joy i.e Data appears for Q1 but not for Q2
<dataTemplate name="FLCMR519_DATA_SET" description="Termination Quote Report">
     <parameters>
          <parameter name="cid" dataType="number" defaultValue="1"/>
          <parameter name="p_cln_id" dataType="number" defaultValue="62412"/>
     </parameters>
     <dataQuery>
          <sqlStatement name="Q1">
               <![CDATA[SELECT qm.qmd_id,
qm.contract_period,
qm.quo_quo_id||'/'||qm.quote_no||'/'||qm.revision_no reference_no,
qm.contract_distance,
qm.mdl_mdl_id,
q.qpr_qpr_id,
q.quo_id,
q.drv_drv_id,
qm.revision_user username,
pb.first_name||' '||pb.last_name op_name,
pb.telephone_no,
pb.facsimile_no,
pb.email,
q.c_id c_id,
q.account_type account_type,
q.account_code account_code,
m.model_desc,
ph.payment_description payment_head_desc,
cl.fms_fms_id,
cl.start_date,
cl.end_date,
cl.actual_end_date,
cl.con_con_id,
cl.cln_id,
cl.term_qmd_id term_qmd_id,
qm2.contract_period term_period,
qm2.contract_distance term_distance
FROM quotations q,
           quotation_models qm,
           contract_lines cl,
           personnel_base pb,
           models m,
           model_types mt,
           payment_headers ph,
           quotation_models qm2
WHERE q.quo_id = qm.quo_quo_id
       AND cl.cln_id = :p_cln_id
       AND qm.qmd_id = cl.qmd_qmd_id
       AND qm2.revision_user = pb.employee_no (+)
       AND qm.mdl_mdl_id = m.mdl_id
       AND m.mtp_mtp_id = mt.mtp_id
       AND qm.payment_id = ph.payment_header_id
       AND qm2.qmd_id (+) = cl.term_qmd_id
]]>
          </sqlStatement>
          <sqlStatement name="Q2">
               <![CDATA[SELECT ea.c_id,                  ea.account_type,ea.account_code,ea.account_name
FROM external_accounts ea
             WHERE ea.c_id = :c_id
               AND ea.account_type = :account_type
               AND ea.account_code = :account_code
]]>
          </sqlStatement>
     </dataQuery>
</dataTemplate>

Defining dataStructure section is mandatory for multiple queries.

How to use one WAD template for all the available queries

Hi,
I have created a WAD template... Now we have close to 25 queries which will use that template for displaying their output at Portal...
Is there any way that i don`t have to create multiple copies of my WAD template...
I.e. all queries would call that same template through portal...

Hi,
The Bex report uses the Standard Template 0ANALYSIS_PATTERN while it is executed.
So if your sure that the look and feel of all the Reports is going to remain same, you don't need to even attach all these Queries to Templates in WAD.
When you execute the BEx query, it would pick up the standard template and run it in portal.
But if you want to customize the Report Template:
1) You can change this standard template 0ANALYSIS_PATTERN and customize it according to ur requrement in WAD.
2) Or you can create a copy of this standard template and change it as required. Then change the template in spro (transaction RSCUSTV27) to point to this Z template.
Let me know if you need more details.
Regards,
Forum

Error while Activating / running Bex queries/reports

Hello
I have following ERRORs while activating / running BEx reports/queries.
1. While Activating BEx reports, I keel getting following ERRORS
Object directory entry R3TR ELEM E341OIR6G715GUMGN0MRXP3MA does not exist
Error when activating element BX7FOOKQB4588RROCBTC2YVZN
BEx transport request 'BIDK901352' is not available or not suitable
2. While running the BEx report/query in Bex Analyzer, I'm getting ERROR in entering the parameters, its NOT allowing / giving me option to select the parameters, for example for 0COSTCENTER, it is NOT displaying list costcenters to select before I can RUN that particular report.
3. How can I trouble shoot ERRORs related to BEx and Portal connectivity.
4. How would I setup the Variants for a Bex query/report ? Are these Variants for per user basis / per report basis. Can I have each variant for particular users OR all users must select their own variant each time when they RUN the report ?
Thanks, Sorry I have asked multiple questions, in jst one thread.
BI

Goto SE03 -->Search for Objects in Requests/Tasks option , select the object type and execute it will give all the transports it has collected before ..
Also you can use transport connection in RSA1 and select the query and find out all the objects in query locked by what request etc ..
Thanks,
Ravi

Error while transporting Queries

Hi,
I am getting this error while transporting queries!!
Object '!ZTIC_UKA' (ELEM) of type 'Query' is not available in version 'A'
Message no. RSO252
Diagnosis
You wanted to generate an object with the name '!ZTIC_UKA' (in transport request ELEM) of type 'Query' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
System Response
The object was not taken into account in the next stage of processing
Thanks

Hi Murali,
YOu are trying to transport the element ZTIC_UKA' of the query,may be an variable which is not colelcted in the request.
Try to transport the query through RSA1> Transport connection->Query-->give you query name -->Drag and Drop to Right hand side and Click on collect all dependent objects and check whetehr they have collected in the same request.Make sure ur variables are collected.
Tranport it now and Check.
Rgds
SVU123
Edited by: svu123 on Mar 4, 2010 7:41 AM

Need procedure for creation of BW Roles, Assigning Queries,Publishing Roles

Hi Experts,
Could you please let me know the procedure for creation of BW Roles, Assigning Queries,Publishing Roles in Business Explorer (BEx - BW 3.5)
Thanks in advance,
Andy

Hi,
Creating BW Roles
http://help.sap.com/saphelp_nw04/helpdata/en/52/6714b6439b11d1896f0000e8322d00/frameset.htm
Assigning Queries
After creating the query, save the query to a role from the query designer.
Publishing Roles in Business Explorer
https://websmp101.sap-ag.de/~sapdownload/011000358700002894802003E/HowToBIPortal1.pdf
Hope this helps you..!
-Pradnya

Problem using DECODE() function with a Query of Queries

I
posted
on my blog about an issue I was having trying to use the PL/SQL
DECODE() function with a Coldfusion Query of Queries. This function
works fine when you query a database for information. However, when
you query another query, it seems that CF doesn't recognize it. I
got errors stating that it found a left parenthesis where it
expected a FROM key word. Here is a simplified version of what I am
trying to do:
quote:

<cfscript>
qOriginal = queryNew("Name,Email,CountryCode",
"VarChar,VarChar,VarChar");
newRow = queryAddRow(qOriginal, 5);
querySetCell(qOriginal, "Name", "Joe", 1);
querySetCell(qOriginal, "Email", "[email protected]", 1);
querySetCell(qOriginal, "CountryCode", "AMER", 1);
querySetCell(qOriginal, "Name", "Sally", 2);
querySetCell(qOriginal, "Email", "[email protected]", 2);
querySetCell(qOriginal, "CountryCode", "AMER", 2);
querySetCell(qOriginal, "Name", "Bob", 3);
querySetCell(qOriginal, "Email", "[email protected]", 3);
querySetCell(qOriginal, "CountryCode", "ASIA", 3);
querySetCell(qOriginal, "Name", "Mary", 4);
querySetCell(qOriginal, "Email", "[email protected]", 4);
querySetCell(qOriginal, "CountryCode", "EURO", 4);
querySetCell(qOriginal, "Name", "John", 5);
querySetCell(qOriginal, "Email", "[email protected]", 5);
querySetCell(qOriginal, "CountryCode", "EURO", 5);
</cfscript>
<cfquery name="qCountries" dbtype="query">
SELECT DISTINCT(CountryCode) AS CountryCode,
DECODE(states, "AMER", "North America & Canada",
"EURO", "Europe & Africa", "ASIA", "Japan &
Asia","") CountryName
FROM qOriginal
ORDER BY CountryCode
</cfquery>
<cfdump var="#qCountries#">

So running this returned the following error:
Query Of Queries syntax error.
Encountered "(. Incorrect Select Statement, Expecting a
'FROM', but encountered '(' instead, A select statement should have
a 'FROM' construct.
Does anybody know why this doesn't work? Is it just not
supported? Please note that I have also tried to use the CASE()
function instead of DECODE() and that resulted in basically the
same error. For now I an looping over my distinct query with a
switch statement and manually loading a new query with the data how
I want it. But it would be a lot cleaner and less code to have the
DECODE() to work. Thx!

DECODE() is an Oracle function, not generic SQL. Q-of-Q is a
very limited subset of SQL and lacks many functions and clauses
available in standard SQL, especially what you may be used to using
in your particular RDBMS.
See
Query
of Queries user guide
Phil

Report Developer Control Of Applying Hints to Analytics Queries

There are numerous ways to apply hints to the queries generated by Analytics:
- Table level
- Join level
- Evaluate calculation
Each has its advantages and drawbacks.
- Table level: applies the hint to every query that references the table.
- Join level: applies the hint whenever the join is used in the query.
- Evaluate: allows the report developer to include a hint, but can't control where Analytics decides to apply the hint.
I propose another method for the report developer to apply hints, when needed, that uses join level hints. All the report developer
does is add the hint column to the Answer or add a filter based on the hint column to the Answer to apply the hint.
Setup
NOTE: I suggest you do consistency checks along the way, especially before starting work in the next Layer, to be sure that all setup errors are resolved early.
1) Start by defining a Logical SQL table in the Physical Layer using the following SQL: Select 1 Hint from dual
2) Alias this table for each hint to be defined for report developer usage. As an example, alias the hint table, creating
No Star and Parallel alias tables.
3) Join each alias to the physical layer fact tables, using a complex join, where the hint could be applied. In the Join definition screen, put the hint in the HINT field and enter 1=1 for
in the Expression section. Yes, we are creating a cartesian join between the hint and the other joining table. As the hint table always returns one and only one row, there
is no effect on the rows returned by the query. For No Star, you
put NO_STAR_TRANSFORMATION in the Hint field. For Parallel, you put PARALLEL(<physical table name>, default, default), where the physical table name
is the name of the actual database table, not the name of the alias table (Analytics will put the alias in the place of the database table name
when it generates the SQL). Additionally, for hints that have no parameters, you only need to join it
to the Fact tables in a query and not necessarily the dimensions. If you include fields from multiple fact tables, the hint will be applied
for each fact table. So, you may see the hint multiple times in the SQL (something like SELECT /*+ NO_STAR_TRANSFORMATION NO_STAR_TRANSFORMATION */ t00001.col1...)
4) Add the hint alias tables to the BMM Layer.
5) Rename the Hint field in each of the BMM hint tables to identify the hint being applied. For No Star, change the column name from Hint to No Star Hint. For Parallel,
change the column name from Hint to Parallel Hint.
6) Set the hint column as a key.
7) Join the BMM hint tables to the appropriate fact tables, using a complex join.
8) Define each hint table as a dimension.
9) Set the Logical Level in the Content tab in each of the sources of the joined tables to use the Detail of the hint dimension.
10) Create a folder in the Presentation Layer called Hints
11) Place each BMM hint field into the Presentation Layer Hints folder.
To apply a hint to your Answer, either add the Hint field to your Answer or create a filter where the Hint field is equal to/is in 1 (the number one). Check that the SQL generated
contains the hint, in Answers, go into Administration, Session Manager, and view the log for the user (the user log level will need to have been set to 7 to see the SQL generated).
Use of hints in more complex setups can be done by performing a setup of the hints that is parallel to the fact table setup. As an example, if you specify fragmentation content and a where
clause in your BMM for your fact tables, you would setup parallel physical layer hint tables and joins, BMM objects and joins, fragmentation content, and where clauses based on the
hint tables (only hint tables are referenced in the where clause).
As any database person knows, hints can either help or degrade the performance of queries. So, taking the SQL of the pre-hint Answer and figuring out which hints give the best
performance is suggested, prior to adding the hint fields/filters to the Answer.

Hi Oliver,
I would suggest you to have a look at the below WLST script which would give you the required report of the active threads and it would be send an email too.
Topic: Sending Email Alert for Threads Pool Health Using WLST
http://middlewaremagic.com/weblogic/?p=5433
Topic: Sending Email Alert for Hogger Threads Count Using WLST
http://middlewaremagic.com/weblogic/?p=5423
Also you can use the below script in case of the stuck threads, this script would send you an email with the thread dumps during the issue occurred.
Topic: Sending Email Alert For Stuck Threads With Thread Dumps
http://middlewaremagic.com/weblogic/?p=5582
Regards,
Ravish Mody

I can not see the physical queries into NQQuery file

Hi all,
I have set the logging level for the Administrator to 4 but I can not see any query into NQuery.log file. I only can see the queries from the initialization blocks.
Could someone please provide me some help on that?
Thanks in advance!
Víctor.

Hi all,
For all users information:
In the repository OracleBIAnalyticsApps.rpd provided by BI Apps there is a system variable named LOGLEVEL. I have modified this variable to 7 value and then the physical queries are showed in the NQQuery.log file.
Thanks to all for your inputs!!
Víctor.

Manual refresh of queries in the Web

Hello,
in the web the default action following any change to the navigation state of the query-result is that an automatic refresh of the query is performed.
We want to enter a series of navigation-steps. It would be inefficient for the query
to automatically refresh each time a navigation-step was entered. Is it possible to halt the auto refresh from executing and instead switch to a manual refresh mode which means that the users can enter a series of navigation-steps and when they are ready, they simply press a refresh button?
Thanks in advance!
Regards,
Birgit.

Birgit,
options could be ..
1. Have the query automatically expand to a specific level for all queries...
2. Have a prequery window where the selection parameters are specified and then let the user enter the drilldown level for the query and then take the values from this template and then pass the same to the main query as URL parameters .. you can refer the Web API 3.x to find out how to do the same and also search for Command Line URLs.. this option would require some innovative javascript and command Line specifications..
Arun
Assign points if useful

Nao quer carregar meu iphone

preciso admitir , que porcaria que ficou o ios 7 , querem copiar , tao sem ideias , olha na boa , fikei com raiva , meu iphone como nao mostra mais que precisa de bateria como mostrava no ios 6 , esta na terceira vez que terei q mandar dar o choque , antes de estalar o ios 7 não dava este problema , espero que voces estejam muitissimos felizes com o transtorno que esta me causando i perca grande de dinheiro , desenbolsei uma grana alta para comprar o iphone 5 ávista , e quando pego depois que baixo esta porcaria de ios 7 , parabens , fizeram minha vida se fuder , comprei uma porcaria cara i que nao quer funcionar , olha APPLE eu quero agradecer pela merda que estao fazendo a minha vida
com atençao Rodolfo Santana , pensem um pouco , não sou apenas eu que esta com este problema , conseguirao fazer a maior cagada de vocês , parabens !!

Boa noite amigo estou com o mesmo problema mei iphone 5s nao carrega e aparece a menssagem que o cabo nao pode ser original, como não a nao ser se a apple estiver mandando o carregador nao original tem 15 dias que comprei o meu e já esta com esse problema

N7K queries

Similar Messages

Maybe you are looking for