N8 and Bluetooth handsfree

Hi,
I have odd problem when I connect my handsfree to my N8. After I power up HF device and it gets connected to phone everything seems to be fine. But after "HF is now connected" message in screen, phone is almost freezed or in some kind of slow motion next 30 seconds or something. I can't actually do anything while that. I think even emergency calls can't be done while that issue.
I have had this problem about two months now, everything is updated, no beta software in use. Does anyone else have problems like this? Any ideas what to do?
BR, Msq

So it seems that I'm alone with this issue :<

Similar Messages

6300 and Bluetooth handsfree problem

I experience this problem with my 6300 and the BH-700 bluetooth handsfree : When the person on the other end talks my mic gets muted and he can't hear me. Ofcourse this also happens if the other end is at a noisy place and then communication is impossible since my mic is always muted.
This seems like a problem of the phone since it happens with any bt-handsfree. On the other hand the BH-700 works fine with all other phones I tried...
I upgraded my phone firmware from 4.7 to 5.0 but the problem still remains. I don't want to think that the hardware implementation of the 6300's bluetooth and simultaneously send and receive data!
Anyone this problem? Any possible solutions?
Thanks!

Hi,
I have simillar problem with BT handsfree - the other side has difficulty hearing me, while I can hear fine.
Do you have any further experience or solution?

HT204387 can you listen to music with your ipod touch 4g and a bluetooth handsfree device

can you listen to music with your ipod touch 4g and a bluetooth handsfree device

Yes if the BT device supports the profiles supported by the iPod. See:
iOS: Supported Bluetooth profiles
The A2DP provide is used with speaker and headphones
The Hands Free profiles (HFP) is typically used with headset (headphones and mic).

Simultaneous E71 Bluetooth handsfree and Headphon...

I have Bluetooth handsfree (factory) built into my Car Audio that is non-A2DP. So to listen to Audio on the E71 I need to connect through Headphone to the Car Stereo system. When I do this , Bluetooth Handsfree malfunctions. The Audio (that Im listening to ) is silenced when there is an Incoming call that I answer, but the E71 seems to cut-off ALL audio through its bluetooth as well (I hear silence plus the other end is unable to hear anything I say).
Ideally, I would like to have the listen to my music through the Wired Headphone link, but would like to take the incoming call through bluetooth handsfree. Any way to make both these work together?
Please help if any of you have a fix for this.
dram12

I doubt if this is possible because there is interlock mechanism (hardware/software) that once the phone senses a head phone is plug into its socket be it from other source, the speaker(mike too) as well as blue tooth profile for head phone are disable. A2DP in blue tooth means it could transmit/receive in stereo.Have you tried to go the web site of that car kit, it could only be an upgrade of its firmware will solve the conectivity issue your facing. Blue tooth connection only without using a separate cable to the stereo system.
Message Edited by android on 03-Feb-2009 01:18 PM
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

N73 Model 0543566 old firmware and bluetooth

Hi all!
I have a N73 with firmware:
V 3.0704.1.0.1
19-01-2007
RM-133
(c) Nokia N73 (80.01)
I am experiencing a problem with my bluetooth audio device (a JVC bluetooth handsfree addon for my car radio).
After using my car handsfree installation (it works perfect BTW), when disconnecting it, people complain about the echo on their side - like I read this is/was a well-known problem with non-Nokia BT devices.
I have read many forums and found out that after upgrading FW the problem is/should be gone.
I have downloaded the software updater but says that I already have the latest FW installed. I also checked manually with model number but the answer persists.
Strange thing is that some of users have FWs like RM-133 v4.0736.3.2.1 or so.
How come my version is latest from 19-01-2007?
Is it possible that for some revisions of N73 FW developing and updating stops or did someone just forget to upload the FW for 0543566?
Is it possible that I cannot get and update the FW on my own but must take it to service center?
Any answers welcome!

yup, the problem is the N73 does not support Phone Book Access Profile... there were others who were successful in DL their contacts by using the application found on the link below...
http://europe.nokia.com/A4991448

Z10 connected to car via Bluetooth handsfree link not providing song information after 10.2.1 update.

I've been using a Z10 for about 6 months and I connect the phone to my car (a 2012 Honda Civic) via the Bluetooth handsfree link to receive phone calls and to play songs that are stored on my phone's SD card. When I play a song, the song title, album and artist information is displayed on my car's LCD screen. However, after updating to 10.2.1 this morning, the song information doesn't seem to be sent to the car. No matter what song I play, the car screen says "none" for the title, album and artist. I can still "scroll" though my songs from the car's stereo console using the forward and backward buttons, but alas, no song information is shown. I've rebooted my phone several times, deleted the Bluetooth connections on my phone and in the car and then reconnected, but no dice. I must admit that I'm really annoyed about this. This is pretty basic stuff. Does anyone else have a similar experience?
Solved!
Go to Solution.

Hmmm...very strange. In the worst of the worst cases, the reload process I used was:
Fully document configuration
On Device WIPE
AutoLoader Reload
On Device WIPE
Reload all configurations (not a restore from backup)
Reload all media from PC
Launch media app and wait for it to full scan for media
Pair with vehicle and see it it now works
Tedious I know, but sometimes required especially with emerging technologies.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

BH 600 Bluetooth Handsfree

I bought a BH 600 Bluetooth Handsfree a week ago. It was working fine. Just today, it suddenly disconnected. Following all the steps again, i press and hold the (call) button on the handsfree till the light becomes steady on. Search for paired devices on the phone, it shows the model BH-600, connects, asks for Passcode, acknowledges it on entering, and i set it as authorised. But when i select the newly added BH600, and select "Connect" it says Bluetooth connection failed. The device is responding fine, even clicks on the device sound alright, but it fails to connect. Please Help. Also, i'd like to know how to see wether the device is Original or a fake?

I've found out how the pairing can be done. When the headset is paired with a phone, it will not pair with another phone or device again. The way to get it to work is as
1. Switch on the headset by pressing the button and hold it until the green LED is stable.
2. Connect the new device by pairing it.
3. The headset is connected to the new device.

Non bluetooth handsfree keylock

I have just upgraded to the nokia 6300. I have a bury non bluetooth handsfree kit in my van. On my previous phone when I entered the phone into the cradle the automatic keylock unlocked itself. With the 6300 the automatic keypad lock stays lock. I have set the phone on headset. Is there any thing else I should be doing. It dangerous at the moment I have to manually unlock the keypad before making a call

Since this error only occurs on your Droid I would assume that it is a system error. I recommend performing a factory reset to clear out all settings. The steps to do this are listed below:
Performing a hard reset will remove ALL data including the Google account, system data, application data, application settings, and downloaded applications.
Follow the directions below to perform a hard reset:
From the home screen, touch the Applications tab (located on the bottom of the screen).
Touch Settings.
Touch Privacy.
Touch Factory data reset.
Touch Reset phone.
Touch Erase Everything

Bluetooth HandsFree Yes - Stereo Bluetooth NO !

Hey All,
Does anyone know how to disable the stereo bluetooth but keep the bluetooth handsfree swithched on.
I'm having a problem with my cars handsfree setup. If listening to the iPod through the headunit(Kenwood DNX6140) using the cable, and a call comes through, it continues to play the music over the voice call via bluetooth. I have also tried streaming the iPod via bluetooth...this works great but again the music does not stop when a call in in progress unless you actually press stop.
Can anyone confirm that when using stereo bluetooth headphones that the music stops when a call comes through.
Would love some help on this one.
Cheers,
David

Okay, does anyone know if you can disable A2DP Bluetooth with iPhone 3.1 update ?

E52 and Skoda_UHV handsfree issue

Hi,
I have Nokia E52 fw. 031.012 and wireless(bluetooth) and embedded handsfree from Skoda Auto called Skoda_UHV (it is integrated as part of car dashboard unit).
E52 is synchronized with Exchange server with security policy requiring pin to protect phone activated.
When the phone is locked using this pin, HF is not able to initiate dialing of number. When I unlock phone, everything works ok.
Any ideas what to do to be ably initiate dial anytem, not only with unlocked phone?
Thanks for any advice
Martin

Can't anybody help? Can you at least say what is behavoiur of your mobile + handfree in above described case?

AshTray and Bluetooth install problems

Was trying to install some old games on my ideapad S10e and somehow resorted to using AshTray custom resolution app (used with eeepc to help run certain games).. well to cut a long story short.. Dont use this app i was able to play a game (diablo2) but it changed all the default resolutions. In the end there was no way i could go back to the native resolution so i had to opt for first time pressing the F11 Recovery button.. took a little while but it did complete the process with fresh factory settings and rez back to normal. Then after that i check my device manager and it said that the bluetooth device wasnt installed. Strange cos everthing else was installed ok. I downloaded the bluetooth drivers for my S10e and clicked install.. it looked like it installed but for the life of me i still couldnt figure out why bluetooth was still yellow in device manager. Well just as i started writing this i figured it out if anyone else comes upon this problem (noob trap). Basically the BT drivers are "extracted" to C:\DRIVERS\WIN\BTW\54bl03ww and you need to run the setup.exe then it installs properly. I know im a noob but i would of thought it installed automatically like all the other device drivers. Quite impressed by the recovery mode appart from the BT hiccup it worked as good as i would expect.
oh well Panic over S10e is back to normal

Now the email began to work again:mansurprised:
Still having problems with bluetooth handsfree device: E 75 doesnt even ask passwords when I try to connect bluetooth handsfree and cant establish connection with voice devices. Bluetooth still works fine with my laptop or other phones! Does anyone have solutions?

5130c-2 Bluetooth handsfree problem

Hi,
I've got a weird problem with my brand new Nokia 5130c-2 - I'm trying to connect a Samsung WEP Bluetooth handsfree. It works perfectly on all other phones. My Nokia sees the device, and pairs it, however without asking for the device password. Then it's reported in Active devices, and also in paired devices, but it doesn't work. The telephone has the last updates - I checked it through the PC suite.
So, anyone has suggestions?
Thank you in advance.

Hi and Welcome to the Forums!
Anytime random strange behaviors creep in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Best!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Bluetooth handsfree silenced by aux. audio out

I have Bluetooth handsfree in my car. It works fine with the Fascinate. ...until I plug my Fascinate auxillary audio output into the auxillary audio input for my car stereo. After that, the Bluetooth connection is maintained and dialing is possible, but call audio doesn't work as long as the auxillary audio jack is in use. The moment I unplug the audio cable, handsfree audio works again. This is unacceptible; I should be able to use Bluetooth handsfree for calls while I listen to music playing out through audio out. My old phone did that fine.
Unfortunately, Samsung seems to disagree. Their support told me:
"Dear Mr Dale
Thank you for your inquiry.While your hanset does support the bluethooth profile for hands free operation, this would be best addressed by vehicle manufacturer, as they can provide a list handsets approved for compatibility.In most cases, this information is avaliable on the manufacturer's website.Please bear in mind that samsung does not support the use of any third party hardware with are handsets. We apologize for any incovenience this presents.
Felipe."
Any chance Verizon could lean on them to fix this design flaw?

Since this error only occurs on your Droid I would assume that it is a system error. I recommend performing a factory reset to clear out all settings. The steps to do this are listed below:
Performing a hard reset will remove ALL data including the Google account, system data, application data, application settings, and downloaded applications.
Follow the directions below to perform a hard reset:
From the home screen, touch the Applications tab (located on the bottom of the screen).
Touch Settings.
Touch Privacy.
Touch Factory data reset.
Touch Reset phone.
Touch Erase Everything

We just added a new printer and bluetooth connection to our iMac. Now iTunes does not recognize our iPads as devices. Have already tried restarting everything. Any other suggestions?

We just added a new printer and bluetooth connection to our iMac. Now iTunes does not recognize our iPads as devices. Have already tried restarting everything. Any other suggestions?

You can try the steps recommended here: http://www.apple.com/support/ipad/assistant/itunes/

Has anyone else downloaded iOS 7 on a 4S and found the WiFi and Bluetooth don't work anymore?

I'm used to Apple products that "just work", but I'm not seeing it with the installation of iOS 7 on my phone (4S). I installed it earlier today, and the Wi-Fi and Bluetooth worked for about an hour, then just quit working altogether. The WiFi button is grayed out in Settings, and Bluetooth dosen't even display a button (all I get is a throbber that continuously spins). Trying to activate them through the "swipe-up" command center doesn't do the trick, and resetting the network settings also accomplishes nothing. Several reboots later, and I still don't have WiFi and Bluetooth.
Has anyone else experienced this, and is there a solution? I may just decide to eschew iOS 7 and restore my pph

After multiple attempts to restore and reboot, I finally decided to take a trip to my local AT & T store. They contacted Apple, and I explained the situation. I ended up moving to the iPhone 5, as my 4S was in the renew period. The 4S is still under warranty, so all I have to do is bring it to an Apple Store, where they will either fix or replace the phone. Looks like one of my kids will be getting a 4S :-)

N8 and Bluetooth handsfree

Similar Messages

Maybe you are looking for