N8 and mms bug with ufone pakistan

yes, i m also facing same problem regarding mms on my n8 (ufone pakistan) so hoping to be released new firmware fixing this bug as soon possible.

you tend to find that this is generally a service provider issue , contact your service provider and make sure you have mms on your account , I had a similar problem with Vodafone UK a while ago and it took several calls to get it restored ! Very much doubt it is anything to do with the handset , good luck and be persistent with your service provider !
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Similar Messages

Updated my 4s and ipad3 and now both are basically useless. Cant access itunes store, app store, weather app wont work and multiple bugs with facebook. How am I supposed to fix all these problems????

Updated my 4s and ipad3 and now both are basically useless. Cant access itunes store, app store, weather app wont work and multiple bugs with facebook. How am I supposed to fix all these problems????

Hi Doomtrooper,
When you updated your iPhone 4S and iPad3 to iOS6, what exactly do you mean when you can't access the iTunes store? Have you checked your connection to the network?
Please be a little more specific

SMS and MMS issues with Z10

Every since I updated my phone (10.1.0.4181), my SMS and MMS have been failing. My SMS will often freeze on one conversaton for up to half an hour and won't let me type or move to a different conversation, though I can go back to the hub or access my apps. Clicking on a different conversation just takes me back to the one that it froze on. Sometimes the entire conversation area is just grey and I can't see anything. My MMS will not send at all, every time that I try it just fails and says "General Problems". When I try to receive them a download button pops up, but when I click on it the button just disappears and nothing happens. I have tried rebooting the phone and pulling the battery, neither has helped. I have tried turning the data off an on again (with a reboot in between) at the suggestion of someone else, but still without success. Everything else in the Hub functions properly, just not my SMS or MMS. Help!

I am having this exact same problem, as well as my contacts list has been scrambled so that the names and numbers no longer match. The phone worked excellent until I updated to 4181 which has completely ruined the useability of my phone.
If Bell gave you a fix for it PLEASE SHARE.

Cut and Paste Bug with SUM( )

If SUM( ) refers to multiple ranges, and one of those ranges is Cut and then Pasted to another location, the SUM( ) function is not changed to reflect the new location of those Cut and Pasted cells. Instead, SUM( ) continues to refer to the original locations.
I tried this in Excel and it works well.
I am using
iPad Numbers Version: 1.5 (423)
iOS Version: 5.0.1

Followed your steps exactly and it's exactly like I said in my previous post. Cut and paste works for effects. Here's exactly what I did except for the part where I created the worst illustrator art that I've ever seen. Just two layers, lovely colors. The .ai file is imported as a comp with retain layer sizes selected. A black brush is chosen set to write on and silhouette luma. The size is adjusted to cover the line easily, I paint on the line, press the e key to reveal the effect in the timeline. It's there, it's also in the ECW so I select the effect, cut it, go to the composition, use Cmnd+Y to create a new layer and paste Cmnd + V and the paint effect is applied to the solid.
There's something going on with your machine, some third party plug-in, some other app, some other issue that's preventing this from working.
Here's my little movie of the whole experiment.
I'd make sure that your AE version is the latest, that you have your memory and processing set to the defaults, and that you're not running any other apps while testing AE. If there's still a problem, file a bug. Your machine is not behaving as my machine and every other Mac I routinely work on is behaving.

Kicad and Wxgtk bug with fix.

Hi,
Im using Kicad but have a problem with printing postscript, which is a pain in the arse when trying to print PCB's.
The problem is to do with wxGTK and has been reported upstream sometime last year, I dont know why the wxwidgets team havent resolved the issue as it looks like a simple fix (coming from a non developer).
Can this fix be added to repo?
http://sourceforge.net/tracker/index.ph … tid=109863
wxGTK problem while printing wide traces.
When using wxPrintout:
printing wide traces show missing rounded end caps.
(Of course, this is not noticeable with narrow traces)
This is due to missing setlinecap setup in postscript
file created by wxGTK.
I suggest to add in /src/generic/dcpsg.cpp, after the
prolog ( after the line PsPrint( "%%EndProlog\n" );)
a setlinecap command like:
PsPrint("%%BeginSetup\n");
PsPrint( "1 setlinecap\n" );
PsPrint("%%EndSetup\n");
With this change, traces are Ok, they are drawn with
rounded end cap, as they do.
Ive tried to add this to flyspray, but get a error when signing up.. the irony.
Fatal error: Call to undefined function session_name() in /home/sites/archlinux/htdocs/flyspray-0.9.9.3/includes/class.flyspray.php on line 721
cheers

moist.powman,
I did not see this post until today, and only started stopping by the discussions on Friday, September 15. The discussions are not my regular job.
However, I have seen this issue before with a game and Teamspeak sharing the sound card. (Sorry, I won't name the game but it is not World of Warcraft)
It had to do with hardware acceleration and DirectX. The resolution was similiar to the one suggested by other discussions users in this thread:
http://discussions.apple.com/thread.jspa?threadID=651647

Display and render bug with FCPX 10.8 on a MBP retina 15"

Hi,
I have a brand new MBP Retina 15, 2.7 GHZ with SSD, OS X 10.8.3 and FCPX 10.8 and I have a problem with most of video fx that just doesn't preview and render.
When I try to preview it display black on the viewer (or white picture or no effect or something uncorrect).
When I apply the fX it render it as pur black or white. Same with Magic Bullet look, when I render it's just black picture.
No problem on geometrics fx
Same story with Motion
I throw the pref and all the basics rescue opération, even re-install FCPX and Motion following the apple process, no changes !
I've got same configuration on the MBP 17"(2009 model) and no problem.
Does it ring a bell to sbdyelse ?
Do you know a way to contact by email sbdy at FCPX apple ?
thanks
cheers
Seb

here is what I did :
Timemachine save of the mac
Restart > format the drive
Install Mac OSX
Timemachine BUT NOT APPLICATION
Re-install all app's
and it works
Important
I did a first try when I had everything from time machine except application, then FCPX was working. Then I re-installl everything from app store and webpages of the other soft (no so many) : FCPX was working. Finally to get the last few app (like office) I decided to use timemachine/application to install them... and the same problem came back. (...)
I start from start... format again... and install the app from app store and webpages, even MBL - Slice X and other different plugin and it work. I decided to not install some recent things before saving my system.
The main 2 things I didn't install are
from appstore : Resolution Tab
and from web
the SONY XDCAM driver I used this week to check some F55 files
http://www.sonycreativesoftware.com/pdzk-lt2
So It could be one of those... maybe, but I don't want to loose anymore time to know it for sure.
cheers
seb

Okay, i have 2 bugs with maverick. First, when I delete a file within a window, the files deletes but the preview doesn't delete until I close the window and reopen it. Second, I work on a network of computers and the search feature is now buggy...

Okay, i have 2 bugs with maverick. First, when I delete a file within a window, the files deletes but the preview doesn't delete until I close the window and reopen it. Second, I work on a network of computers and the search feature is now buggy... When I search for a file, A) it asks me if it's a name, or it wont produce anything, and B), its slower than in prior OS versions and in some instances I have to toggle to a different directory and go back to my original directory in the search: menu bar or the search wont produce anything... Very buggy.

It appears to me that network file access is buggy in Maverick.
In my case I have a USB Drive attached to airport extreme (new model) and when I open folders on that drive they all appear empty. If I right click and I select get info after a few minutes! I get a list of the content.
It makes impossible navigate a directory tree.
File access has been trashed in Maverick.
They have improved (read broken) Finder. I need to manage a way to downgrade to Lion again.

I have a MacBook Pro 5,4 running OSX 10.6.8 and Safari 5.1.10. A website i like has a known bug with 5.1.10 and recommends I install a newer version of Safari or use Firefox or Chrome. Just looking for advice on the best approach. Thanks!

I have a MacBook Pro 5,4 running OSX 10.6.8 and Safari 5.1.10. A website i like has a known bug with 5.1.10 and recommends I install a newer version of Safari or use Firefox or Chrome. Just looking for advice on the best approach. Thanks!

Unfortunately, Safari cannot be updated past 5.1.10 on a Mac running v10.6.8.
So, the options are to upgrade to a newer OS X or use Firefox or Chrome.
Be aware, Apple no longer support Snow Leopard v10.6 > www.ibtimes.com/apple-kills-snow-leopard-os-x-106-no-longer-receives-security-u pdates-1558393
See if your Mac can run v10.9 Mavericks > OS X Mavericks: System Requirements
If so, you can download and install Mavericks for free from the App Store.
Read prior to upgrading > Upgrading to 10.7 and above, don't forget Rosetta! | Apple Support Communities

Am i the only one that see's serious bugs with Windows Search index on Windows 8.1 and Office 2013?

So i originally had Windows 8 and Office 2013 installed. I noticed that alot of my emails in Outlook 2013 as well as contacts werent being indexed. I waited for windows 8.1 and did an upgrade hoping the 8.1 would fix the issue. It didn't.
So i formatted my hard drive, installed fresh windows 8.1, and office 2013, and let it Windows Index run. I see 2 things happening.
A.) The indexer never completes
B.) the indexer takes up 40% cpu usage.
I tried rebuilding, creating index from new location, nothing seemed to work. I decided to prevent the indexer from searching Office apps (outlook and onenote) and low and behold it completes indexing.
I decided to try and format again and see if there was some bug causing the issue. So this week I formatted once agian, loaded Windows 8.1, installed updates, and loaded office 2013. Once again, my indexer
is stuck around 70k items and my processor usage on Searchindexer.exe is around 30-40%.
Is this a known bug with 8.1 and office?
Brad Nelson MCSE/DCSE/A+/Network+/WCSP

Hi,
I test in my environment, and Windows would finish the index, the CPU usage keeps in 29%, which my RAM is 8G.
Can you tell us how you let the Windows Index run?
Alex Zhao
TechNet Community Support

Has anyone seen this BUG with Time Warp and Dissolve?

I'm doing some real basic slow-mo clips, transitioning with various dissolve wipes. I've come across a problem that is extreemly frustrating! I'm wondering if anyone has insight on a fix or if Adobe does service packs or fixes that I might be able to install.
If you put two clips adjacent to each other on a timeline, apply time warp, set percentage to say 30% of realtime, then apply a dissolve between the clips, clip B, the outclip will play in reverse for a period equal to about 1/3 of the duration of the clip.
This is true scrubbing through the timeline and even rendering.
VERY ANNOYING!
I'm going to call support tomorrow, but that's not going to help me get my project finished any sooner since this is a critical element in this composition. I've tried the time remapping method, but the frame-blend is no match for the pixel motion of time warp.

Steve,
I think your post #11 was being sarcastic, but you left a little wiggle room for it not to be. With the sarcastic interpretation, I must add my thoughts:
Here is the link to the Adobe bug report form
. It is important that users who discover bugs with reproducible steps file them - otherwise they don't stand a chance of ever getting fixed. Steven Gotz's advice was sound in this regard.
As to the discussion of workarounds - since this is a User-to-User forum, the best that we as a community can do is help each other out with workarounds, since none of us here have the power to actually fix anything.
The important thing to glean from SG's post is the definite need to file a bug report.

I've a "bug" with the apps downloading. This one stops at the end and stays like that infinite. The app doesn't appears normally on the homescreen. Someone can fix this?

I've a "bug" with the apps downloading. This one stops at the end and stays like that infinite. The app doesn't appears normally on the homescreen. The app is on the home screen, and its downloading is blocked at its end, without showing the app like it should when it's finished downloadung. Does someone can help me and fix this please?

Hi Tom
Thanks for replying!
I had heard that these switches didn't stack unless everything was identical.
I only tried it at all out of pure desperation.
I've applied and tested every version 3 firmware in standalone mode via a console cable and xmodem.
They either never come up properly receiving decompression errors and reboot constantly in a loop.
Occasionally they stall / jam and stay there displaying the same error with no rebooting.
And twice out of 80-100 times I got it to boot to the username and password screen in standalone mode.
But as soon as I made a change it crashed and started the rebooting cycle again.

Downloaded Reader XI and started to recieve error 40000015, found the fourm with the patch to the registery fix, now it tells me unable to connect to the server. To many bugs with the reader, how do reinstall an older version?

downloaded Reader XI and started to recieve error 40000015, found the fourm with the patch to the registery fix, now it tells me unable to connect to the server. To many bugs with the reader, how do reinstall an older version?
I click on the launcher and nothing happens, 15 min later it will tell cant connect to the server.
My computer is a windows 8.1; 64 bit operating system. I am stationed in South Korea, but that should not affect the program. Help please.
John

Hi johnd83157268,
Sorry for the inconvenience that has caused to you.
Could you please let me know what changes have you made in the registry.
You might need to uninstall Adobe Reader from Control Panel and try install it again from the following link:
Adobe Reader Install for all versions
Please ensure that you are logged in as administrator and anti-virus is disabled as that might interrupt installation.
Try again and then let me know.
Regards,
Anubha

Imovie '09 v8.0.5 bugs with speed change and titles

OK so here is what I'm experiencing.
I take a clip and change the speed. Then I add transition from the previous clip to this one and all of a sudden I cannot play the video again. I can't delete the slowed down clip even. I can play video that is in the events library, but not that in my project. When I do mouse over the beginning of my video and play I can hear the sound but it is like it is far off in the distance and the video is just solid gray. I have run into many other similar bugs when changing the speed of a clip but could always delete the clip, quit, relaunch, and try again. With this problem I added a transition and can't even delete the clip. Apple please address this issue. Thanks!

I am having the exact same issue. Change the speed of a clip in the project, then the ongoing video screen no longer displays the project correctly (but does display when playing clips from the library). This happened recently as I've made several older projects on iMovie 09 using multiple speeds. Perhaps a bug with the 8.0.5 update.

Downloaded 11.0.3 (42) 64 bit to my MacBook Pro and it crashes every time I select a song a use the 'add to' function to add to a play list. It's never done this before, is it a bug with the new version?

downloaded 11.0.3 (42) 64 bit to my MacBook Pro and it crashes every time I select a song a use the 'add to' function to add to a play list. It's never done this before, is it a bug with the new version?

You could just disable updates. Change these settings in about:config.
* app.update.auto - set to false
* app.update.enabled - set to false
You can still check for updates with the "Check for Updates" button in the About Firefox window, but it will download the update file anyway if there is an update available. You can also check which is the current release from here:
* http://sjc.mozilla.com/en-US/firefox/new/

I have bought this ipad with in Pakistan its used and u think its stolen from abroad now uts impossible to give it back and the content is locked such as pics whats is thecsolution now???

I have bought this ipad with in Pakistan its used and u think its stolen from abroad now uts impossible to give it back and the content is locked such as pics whats thecsolution how can i use it? or is there any way to give it back from whom it was stolen? than what about my loss

I have bought this ipad with in Pakistan its used and u think its stolen from abroad now uts impossible to give it back and the content is locked such as pics whats thecsolution how can i use it? or is there any way to give it back from whom it was stolen? than what about my loss

N8 and mms bug with ufone pakistan

Similar Messages

Maybe you are looking for