N8 and speed dial, No spaces allowed?!?!?!

When i wan to put a number with spaces on a short dial key (e.g. long press "2") spaces in the number is not allowed!!! (e.g. +xx xxx xxxxx)
Why this? In the normal contact list it is no problem even with ().

Paul,
Enter P9_USERID in Expression1. No preceding colon ':'
Cheers,
Hari

Similar Messages

  • CUCM 4.3 using BLF and Speed Dials features.

    Hello,
    Does anyone has some informations about if BLF and Speed Dials work with CUCM 4.3
    We have tested it using 6.1 and it works
    We have the needing to use both features Speed Dials ( and not Call Park ) and BLF.
    Thanx in advance
    Marco

    Hi Marco,
    Sadly, support for BLF/Speeddials was not added until CCM 5.x so these features are not supported in CCM 4.3
    Hope this helps!
    Rob

  • Bluetooth and Speed Dial Issue

    I just got a new 8830, and have updated to latest software - 4.5.0.77, and am having two problems I can't find answers for.
    Bluetooth - I enable Bluetooth;  it works fine.  After I power down and up again, the Bluetooth is disabled and has to be enabled again.  Why does it not just stay enabled?
    When the phone is locked (enterprise server), I can't use the speed dials, even though I have the phone set to Allow Calls when Locked.  I can make calls, but not use speed dial.
    My old 7130e allowed did not these things.  Are there ways to fix these?
    TIA...
    Peter

    Hello and welcome to the forums;
    Are any of your contacts assigned to the Z or B keys? If so, try reprogramming those contacts temporarily to another key. Also, have you tried un-assigning a speed dial and then re-assigning it to see if the speed dial comes back?
    Hope this helps,
    TreoAide

  • Contacts and Speed Dial issue

    This evening I went to call someone on my Pre Plus and my contacts were gone.  Rebooted, they came back.  Tried the speed dial again and it does not work.  The contacts DO have the speed dials assigned.  They worked yesterday....Anyone know what the problem is?  I can't find anything here about it!

    Hello and welcome to the forums;
    Are any of your contacts assigned to the Z or B keys? If so, try reprogramming those contacts temporarily to another key. Also, have you tried un-assigning a speed dial and then re-assigning it to see if the speed dial comes back?
    Hope this helps,
    TreoAide

  • Freetalk-1200 Connect.Me speed dial problem

    Just received my long awaited Connect.Me and it's been working just as I expected. The only problem I encountered was that I couldn't assing speed dial numbers to 2 of my contacts. Others work perfectly, when I click them, box of information appears to the middle of the screen, but when I click one of the two with the problem, nothing happens.
    I have tried everything like resetting from the button and from the web UI, deleting and adding them again to my contacts but nothing helps. Adding new contacts works fine. I would not rather create a new Skype account for my self - nor ask these two friends to make a new account for themselves - just because of this problem. Any kind of advice is welcome
    Cheers from Finland!

    Skype hasn't supported speed dials in it's software for some time.  It's considered a legacy feature. The use of speed dials is configured through the Freetalk Connect Me web interface, not the Skype client.  You need to sign into your Connect Me device via your web browser and click on "Contacts and Speed Dials".  Once there all your contacts will be listed on the left pane.  Select any one of those contacts and click "ADD TO SPEED DIAL".  It will assign a speed dial number incrementally on the right pane.  You can change that number to a number of your choosing (0-99) at any time.  That's all it takes to set up.  If you recently add a contact it my not show on that list.  If it doesn't sign off the client in which you added the contact or contact changes, then power cycle the Connect Me box and log back in.  It should update.  If it does not, the only other alternative is to do a factory reset on the unit so that it will purge the list and updated it with the latest copy.  Below I attached an image of the screen, though it may take some time until it gets approved and displayed to the general public.

  • Speed Dials on 7941/61?

    Here's a simple one for you. When I set up Speed Dials on 7911G's, I can scroll through them using the Green UP/Down Arrow Keys. This feature doesn't seem to be in the 7941/61G's. In order to use the speed dials, I need to dials the number and press AbbrDial. This is fine but the User would then need to know all of their speed dials off the top of their head from the beginning.

    Hi,
    You have probably solved this already. But just in case.
    7941 / 61's can have both abbr dials and speed dials. The speed dials on these phones are associated to the line buttons on the phone. i.e. 1 speed dial on a 41 and 5 on a 61.
    However, you need to change the phone button template so that the buttons are set to speed dial instead of lines.
    Then they should be available to set as speed dials.
    Cheers,
    Tim.

  • Speed dial was the main attraction of Firefox! Why can't I have it in the current version?

    Running Windows XP, loved Firefox and Speed Dial. Downloading the new version of Firefox messed up everything.
    I've sent in reports re crashing . No replies from you. Think I'm losing interest, and will stick with Internet Explorer.

    Crash reports go into a pool of data used to find problems in Firefox, but they do not generate a personal response. If you have the crash ID number, some people here can look up your crash report and give you advice on it.
    If you decide you haven't lost interest, have you tried this article? [https://support.mozilla.com/en-US/kb/Firefox%20crashes Firefox crashes | Troubleshooting | Firefox Help].
    Also, there are several speed dial and fast dial add-ons. If yours isn't compatible with Firefox 5, you might be able to find a great alternative.

  • 5800 - cannot speed dial and dial from handsfree c...

    I verified the following behaviour of the new 5800 which seems to me to be a bug, because it works on other nokia series 60 phones:
    Because I synchronize my phonebook with MS Outlook, phone numbers have the syntax "+43 (1) 9876543". These phonebook entries can be dialed without problems when I call using the phonebook.
    But if I use the speed dialing feature (press and hold e.g. key "2" ), I get the message "Nicht gestattet" (German, means "not allowed" ), and the number is not dialed. If I delete the spaces and the brackets, dialing is possible without problems.
    The same behaviour can be seen if I try to dial from my built in handsfree set in my car with numbers as described above.
    Before the 5800 I used a E65 and a 6120c, there the syntax described above worked without problems.
    Software: v11.0.008.red.01
    Any clues?
    Best regards,
    Thomas
    Message Edited by tez1 on 04-Feb-2009 11:52 AM

    magpie68 wrote:
    FIX... 
    I got this, I found out it happened when the number has spaces in it.
    Try cleansing the number of all spaces and punctuation (and prefix with +country code)
    This works for me.
    Alan
    Sorry, this is no fix, this is a workaround. It is clear, that this will avoid the problems. But PIMs like MS Outlook create phone numbers in this format; after synchronization with my phone, there are spaces in all of the phone numbers. Therefore I suggest, Nokia implements this like for all other S60v3 phones. This would be the only fix. Regards, Thomas.

  • N8 speed dial Not Allowed using international form...

    If you assign an international format number (ie +44xxxxxxxxxx) to a speed dial it comes up with Not Allowed.

    Pl. refer
    /t5/Nseries-and-S60-Smartphones/N8-00-Speed-Dial-i​ssue-with-formatted-numbers/m-p/810665/highlight/t​...
    --------------------------------------------------​​-------------------------------------------------​-------​------------------------------------------​--------​--If you find this helpful, pl. hit the White Star in Green Box...

  • BUG: Speed Dial "Not allowed"

    When a number in Contacts is saved in the Outlook's format, e.g. +358 (400) 123 456, the Speed dial press-and-hold function result an error message "Not Allowed".
    The workaround is to manually edit the number into unstructured string, e.g. +358400123456.
    Hopefully, the Nokia-Microsoft alliance will help to iron out this kind of incompatibilities...

    Pl. refer
    /t5/Nseries-and-S60-Smartphones/N8-00-Speed-Dial-i​ssue-with-formatted-numbers/m-p/810665/highlight/t​...
    --------------------------------------------------​​-------------------------------------------------​-------​------------------------------------------​--------​--If you find this helpful, pl. hit the White Star in Green Box...

  • Speed Dial and Abbreviated Dial

    I have to configure 40 phones with 100 Speed dial/Abbre. numbers. Is there anyways I can configure one phone with these numbers and have this phone publish these  to other 39 phones?
    OR is there a easy way of doing this task?
    I am using CCM 9.x and Cisco 7821 SIP phone. Any help would be greatly appreciated.

    Hi
    You could configure one phone, and then export the phone config (using BAT import/export functions) then edit the output file to copy the speed dials to the other phones.
    On 10.5 you can associate all the phones to one user, and the User Portal allows you to link the phones together so the speed dials are synced. Just found this the other day, but it's not much use to you just now!
    Aaron

  • How do I set the default page when I select "+" for a new tab? Right now it defaults to Yahoo search and I want to set it to my Speed Dial page. I did have the default page set to Speed Dial but I can't find anywhere how I did it in the past.

    You can set the homepage for opening tabs, but I can't find the setting for designating what page opens when I hit the + button on tabs.
    This is the page that loads:
    http://search.yahoo.com/?fr=freeze&type=W3i_NA,132,3_6,Tab%20Search,20100937,6693,0,16,0
    How did Yahoo embed this in the Tab settings?

    Firefox '''does not''' come with a setting for a page that opens in a new Tab, the default installation always opens a blank page when you open a new Tab. Many extensions include a feature to open their choice of a webpage when you open a new tab, as does the Speed Dial extension which uses a "local page" internal to Firefox.
    You need to figure out which extension has taken over that preference that Speed Dial needs to use. You didn't bother providing a Troubleshooting Information... listing as requested when you asked this question, but I can guess your problem is related wither a Yahoo extension or a Conduit / OurToolbar extension - as there is a plugin listed = Package Installer & Install Conduit.
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • How do I program pauses and/or waits in speed dials

    I am using Cisco IP Communicator 8.6.1.0 softphone. I have entered speed dials and I am looking for how to enter a pause or wait so that it can dial the conference phone number and then enter the conference code. The popup says I can only enter numbers (0-9), plus ( + ), asterisk (*), or pound (#). If I enter a plus, the phone gives me a busy signal when dialing. I cannot enter a comma (,) which is common elsewhere.
    I've asked my company's Help Desk and they don't know. Cisco Support says to talk to my company's Help Desk. I can't find mention of "pause" in the documentation I've been able to find.

    Try writing a rule, Mail Preferences, Rules  tab, click add rule.
    If "any" of the following conditions are met:
    Next drop down select "Message is Junk Mail"
    Perform the following actions:
    Next drop down select "Move Message" to mailbox "Trash"  or "Delete Message"

  • All the images in my Speed Dial thumbnails have disappeared and I can't get them back.

    All the images in my Speed Dial thumbnails have disappeared and I can't get them back. When I check the settings all the thumbnails have the site shown in the details so should be showing the site in the thumbnail, but they're just blank. I uninstalled Speed Dial and installed it again, but to no avail. Something is stopping the image appearing but don't know what. I paused blocking on Ghostery, but that makes no difference. Any suggestions would be welcome!

    See [[menu bar is missing]].

  • Q10 speed-dial and texting issues

    Hi there,
    I am setting up a q10 for my wife, and i also have one.
    I cannot do speed dial on my q10. I have two brand new identical devices and one can do speed dials, and one cant.. I can set up the speed dials, but it doesnt activate when i do a longpress.
    Also when i longpress a number in my call log it doesnt give me the option of sending a text, whereas my other devices does.
    Also when i play a song it deosnt give me the choice to add that song as a ringtone whereas it gives me that choice and other choices on my other device.
    My questions are:
    Is there a way i can restore some defaults to have these features, or change options so i can have these same features that i have on my idetical device.
    or is the second devices faulty> Seems odd that it would be as its brand new.

    Hi Husam,
    Thank you for your questio.  However this community is for Cisco Small Business Products and the PLW400 is a Linksys product.  Here is the area that may help you further with your question. http://support.linksys.com/en-us/support/powerline/PLW400
    Regards,
    Cindy Toy
    Cisco Small Business Community Manager
    for Cisco Small Business Products
    www.cisco.com/go/smallbizsupport
    twitter: CiscoSBsupport

Maybe you are looking for

  • Is smb 3.0 already supported for exchange 2013

    Hello, We are looking to deploy exchange 2013. We have a netapp storage and vmware environment. I was wondering if smb 3.0 is already supported for exchange 2013. I read in a blog of 2012 that it wasn't supported at the time. We would like to use it

  • Problem printing Special Characters in Smartform

    Hi, I am developing a Smartform for Position Description. For that I have to display data from table HRT1002 as the data in this table is stored using Text Editor the data internally is stored in '#' when there is a enter, space or some special Chara

  • Not able to see sid

    Hi, Pls tell me the way by which i'll get output for ps -ef|grep pmon as i'm getting only.. # ps -ef|grep pmon root 5137 5132 0 21:03:27 pts/4 0:00 grep pmon even sid also set for this.. due to this i'm notable to create database. pls help.. see outp

  • SIP Trunk error, Warning: 399 "Unable to find a device handler

    Hi Guys, I am new at this, but I am having some issues with connectivity over a SIP Trunk. By the way I am not sure if this is the right area to post this, but here we go. I have two CUCM 8.x cluster and I have a SIP trunk that connectes them both, a

  • PDF copy restriction

    I would like to make a function that makes it possible to open a PDF file on no more than two computers. So if anyone try to open in a third computer it shall not be possible. Is it possible?