N8 Anna Hard reset not work

I dont know its just me or anybody else got this problam, but i cant hard reset my phone (three fingers method).
When i keep volume down + camera + menu buttons and turning it on - it just turns up without any difference between normal start up.
 any soluttion to it? or should i take it to nokia care point?
Nokia Please Help N9 live!
Please Fix:
Browser Downloads
Video Call
Voice Deal
Fm Radio

maybe you are not doing it right
http://europe.nokia.com/support/search?page=1&full​content=true&cat=support&cnt=1&qt=n8+reset)
/t5/Nseries-and-S60-Smartphones/How-To-Hard-Reset-​N8/td-p/772128
Greece Nokia X6 RM-559 v40.0.002

Similar Messages

  • HotSync won't update...hard reset not work

    I was not getting my updates from several HotSyncs on my TX. Was receiving low memory messages, so I did several resets to no avail. I eventually did the hard reset and all of my data was removed. When I attempted to HotSync to restore the info, my laptop did not recognize the TX (device). I reloaded all the Palm Desktop software on the laptop and still no results. Where did I mess up? Thanks
    Post relates to: Palm TX

    What happens when you try to sync? Do you get any error messages??
    If you are getting the error message, "the connection between your device and the desktop cannot be established, please check your setup and try again" here is what you need to do.
     Do you see the hot sync icon (circle with red and blue arrows) on the bottom right of your computer screen? Is there an arrow with the option to "show hidden icons"? If you do not see it there, hot sync will be disabled and you will keep getting that message (the connection between your device and the desktop could not be established...). To enable the hot sync program once again, click on Start > Programs/All Programs > Palm OS Desktop/Palm One > Hot Sync Manager. It will take about 5-10 seconds and the icon will be there once again. Now the sync should go through. When you begin sync'ing, the computer will prompt you, "there is no user name associated with this account..." select your old user name and then all the info will come back onto your palm.
     I hope this works for you!
    Post relates to: Tungsten E2

  • Hard Reset Not working on Palm Tungsten E

    I have Palm Tungsten E. S.No. OOV3V5n4h511.
    There is a problem with hotsync of Documents to go  and error message is coming.  I tried several times.  When I tried hard reset it is not working and only soft reset is occuring.
    Please assist to overcome and reset my palm computer.
    Ramamurty
    Post relates to: Tungsten E

    Are you sure you are doing it correcly?
    A hard reset is performed by holding down the power button while sticking something thin (paper clip) into the back reset hole of your device. Keep your hand on the power button while you release the paper clip from the reset hole. The screen will now say "Palm Powered." Take your hand off the power button. You will now see a screen in 5 languages prompting you to erase all data from the palm. The screen will say "erase all data? Yes - up, no - down" and you need to click on the up arrow (silver button on the 5 way navigator on the bottom of the palm). This will erase all the info from your device.

  • Miix 2 10 freezing - hard reset not working

    Hello! For the second time in a few days my miix 2 10 decided not to wake up again. The windows button makes it vibrate. But no reactions beside that. Last time the error disappeared after some time, I dont' know why. Would not be a big deal to me beside this fact: Right now I am not able to perform a hard reset. What are the options to do a hard reset? Is it pressing the power button for more than 10 seconds? Does not work. Pressing both volume and power button? Does not work. What to do? Any help is greatly appreciated! Kind regards,Jan

    Got my Miix 2 10" on Monday 15. Performed a lot of Windows uptates, unistalled Mc Affee and connected a Bluetooth mouse. Then the tablet lost contact with the keyboard and track-pad. Tried to restore Windows, but got a message telling me no recovery partition was found. Then the screen went black. The tablet did not recognise the power switch, and it was impossible to reset or switch it off. Pressed the button for more than one minute. Funny thing is the mouse pointer from the bluetooth mouse moved around, but nothing else was visible. I could see in my router that the tablet was connected to my Wi-Fi, so it was not completely dead. Left it over-night and tested it in the morning, but still not able to wake it up or shut it down. Back from work in the evening it had obviously drained the batteries, and wake up normally when connected to the charger.  When the batteries was fully charged I switched it off (not sleep). It was not possible to switch it on again without using the charger. I have not been able to replicate this, but it is not a good feeling to have a mobile unit that can lock itself up completely, or not wake up without external power.... Windows log files indicates that it shut down because of power loss about 15 hours after the initial freeze.The bluetooth mouse was installed with standard Windows driver. Tablet is European / Nordic version manufactured 12. jan 2014. Bios is 95CN12WW, 25.12.2013. I do really hope Lenovo manage to sort of the trouble with this tablet. Its quite nice, and I like it except the scary feeling of being stuck with a brick.

  • Airport Express Base Station - hard reset not working?

    Hi... I have 4 airport expresses, so it's not like I'm inexperienced... having reset them many times. I've had this one about a year. Hard reset and soft reset are happening (Airport got renamed from the name I gave it to "Base Station..") but I can't configure it. It asks me for a password. I've tried public and just about any other password that I might have previously given it... and I get an Error Code: -4. "An error occured while trying to access the base station. Make sure your network connection is valid and try again."
    Does anyone have a clue as to what might be going on, or how to work around this? I don't have a usb to usb handy.
    Thanks, --- Alain

    Thank you, Bob.  Switching  WEP 40 Bit worked like a charm.  I'll make sure and speak to FIOS about the level of security.  Now, excuse me while I go and rock out in my garage with AirTunes. 
    -paul
    http://www.paul-altobelli.com

  • Just for variety - Hard Reset not working anyone ?

    Anyone else having problems with actually getting their Time Capsule to Hard Reset (never mind the reasons for needing to reset in the first place!) ?
    Depressing the reset button for 5, 10, 15 seconds doesn't produce amber blinking on the unit I'm just trying to set up, and doesn't appear to cause any changes either. And whilst depressing the reset whilst plugging in/powering on does produce fast amber blinking, once the unit eventually decides to get to a point where I can access it with Airport Utility, it does not appear to have reset to factory defaults, it still has my disk and network name, and passwords.
    Anyone else experienced this ?
    The above aside, I did initially get it to raise a satisfactory Airport network for a while, but then just before I attempted an initial backup of one of the several machines it's supposed to be serving, I accepted a prompted firmware upgrade to 7.3.2, and from that point on, problems: Airport Utility couldn't find it for a while, disk intermittently wouldn't mount even over ethernet, etc,etc. Noticed on the board that some were feeling 7.3.2 was dodgy, so downgraded to 7.3.1 again (what it came with, I think), and even just had a stab at 7.3 - it's just not behaving at all now, on any version, though it can still occasionally be coached into providing an Airport network, and bridging ethernet, ok.
    But throughout all this, I don't think I've actually managed to get it to properly hard reset even once.
    Be very grateful to hear any thoughts or comments, or of any similar experiences - otherwise I guess it's back to the shop for a swap.
    Andy.

        Hello moxim! Let's figure this out. I am sorry your device is still not working. After a Hard Reset, your next step would be to review warranty options. Please reply to my Direct Message, and I'd be happy to check into this further.
    Thanks,
    MichelleH_VZW
    Follow us on Twitter @VZWSupport

  • HT4623 Dead iphone 5s-hard reset doesnt work. Now what?

    We just got my daughter an iphone 5s. we went to update it last night and it turned off and wont turn back on. Screen is black, hard reset doesnt work, and it doesnt register on the phone to be plugged in/wont charge. Only had it about a week. Hasn't been dropped, or gotten wet. Im guessing we need a whole new phone? I hope not but..

    Start here
    http://support.apple.com/kb/TS3281
    If nothing fixes it Apple Store genius bar

  • My external hard disk not working properly in my macbook pro . anyone help me . its seagate  hard disk

    My external hard disk not working properly in my macbook pro . anyone help me . its seagate  hard disk

    You need to get some software that allows your Mac to read and write to the NTFS disk.  There's a whole bunch of stuff out there, but this program has a good review, and you can try it for free.  I would move everything off of your external drive, reformat it into Mac OSX extended, and use it for your Mac.  You don't need NTFS anymore, unless you still have a Windows computer that needs it.

  • Soft reset not working...screen black, led blinking

    so basically...i soft reset my phone...(by the way this upgrade is a pain!)...and the screen went black (normal), but the led light just kept blinking.  i thought maybe because of the upgrade it needed more time or something.
    so i decided to leave my phone and go get ready for work thinking by the time i'm ready to jet, it would be up and running...
    45 minutes later...NOTHING.  still black.  still blinking.  so i did a hard reset which worked just fine.
    but i had to soft reset my phone again (why? the alerts sounds stopped working...resetting it makes them work again)....but same deal:  black screen, blinking led.
    anyone know whats going on?  is soft reset just dead now with the new upgrade?
    btw - the blackberry folks know about the alert sounds issue...it's currently being looked at.
    anyway...HELP!

    Hey kristinealcatraz,
    Welcome to the BlackBerry Support Community Forums.
    Depending on the LED flashing it could be boot rom failure.  
    What BlackBerry are you using?
    I'd suggest to follow this article to get your BlackBerry up and running: www.blackberry.com/btsc/KB10144
    Let me know if you run into any problems with the application load.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • Reset not working on iPad Air. I just bought this iPad Air from an individaual.  It was listed as new and came with the box, charger, and guide.  The seller said it was jail broken and I told him I did not want it jail broken  and he said he would reset

    He said he would reset it to factory and I said ok I would purchase it.  He supposedly received it as a gift from his business and already had one.  Well it all looks in new condition and powers up and down ok, and connected to WIFI when I checked it out at Starbucks.  SIRI worked, Safari and the camers worked so I took it.  Nothing was on the screen but standard  app symbols you see on a new iPad.  I compared it to a display at a store.
    Well when I got it home I plugged it into my computer and it asked me to trust and I said yes ond on the Air it asked to ok it and I did.  Then I tried to go to App store and it came up and asked for the password for a Apple ID.  Of course I did not have it.  I then tried to do a reset.  I went to Settings and did a reset erase everything.  It asked me twice if I wanted to reset as it was not recoverable.  I said yes.  It did not ask for and Apple ID or password. The Air reset started and the Apple logo came up and a bar started to move arcoss under it.  It almost became a full bar when the screen went blank and the little small rotating symbol came up.  It just kept rotating and never finished.  Had to do a hard reset holding the Home and Sleep button for 10 seconds and the the Air came back.  Everything is working on the Air except I can not get it to reset and link it up to my computer itunes.
    It is on IOS 7.0.4
    I hope I am not out my $475.  Any help would be appreciated.  Any options or suggestions.
    Thanks.

    You need to return it to the seller and get your money back.  You cannot reset or use the device with another AppleID installed unless you know the password for that ID.
    If the device has been jailbroken, no one on here can give you any further help...the Terms of Use prohibit us from doing so.

  • Reset NOT Working

    For the past month my Time Machine hasn't been able to keep its network up for more than about 5 minutes. Sometimes when I do a hard reset (take out the power and ethernet internet feed cables then re-plug them after a couple minutes) it will come back and the network will work (though only for 5-10 minutes). Other times the reset does not work at all.
    The obvious reasons for this being annoying are: I can't get on the web and I can't back up my computer.
    Anyone have any thoughts?

    You may do better in the Time Capsule or Airport forums, as many of us here (like me) aren't very familiar with them.
    Those forums are hidden in the DIgital Life section, at: http://discussions.apple.com/category.jspa?categoryID=140

  • Airport Express not recognized in iTunes- reset not working.

    I have spent 2 days trying everything I've read here in these forums to RESET my Express.
    I've done a soft & a hard reset each several times.
    I've tried unplugging the Express overnight.
    I've upoaded new firmware.
    I've discarded the new file created each time in the Airport configuration folder.
    The reset seems to work....but then my Express is not connecting to iTunes. That is the new config shows up in the pop up menu in iTunes but does not complete the connection. I only use the box for remote connection of my music system. I've tried to set the Express up with each of the 2 choices in the AirPort Setup Assistant, ie. extending the range or a new network. Also, the light which is normally not flashing is indeed flashing. I've had Express functioning fine for over a year, this issue has happened only once before. Last time I was able to reconfigure successfully. Any ideas would be greatly appreciated.
    My set up is as follows:
    G4 destop with Airport base station, iBook wireless which I'm using to config. the Express box.

    To set up the AirPort Express Base Station (AX) as a "Wireless Client," using the AirPort Admin Utility, connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
    AirPort tab
    - Base Station Name: <whatever you wish or use the default>
    - Wireless Mode: Join an Existing Wireless Network (Wireless Client)
    - Wireless Network: <type in your wireless network name or select it from the pop-up menu>
    - Wireless Security: Not enabled
    OR, if you are using security on your wireless network:
    Security Options
    Change Wireless Security
    - Wireless Security: <Select the appropriate level of security for your wireless network: 40-bit WEP|128-bit WEP | WPA Personal | WPA Enterprise>
    - Password: <enter your wireless network security password or key>
    Music tab (optional)
    - Enable AirTunes on this base station (checked)
    - iTunes Speaker Name: <enter name of speaker for iTunes remote speaker list>

  • Backup external hard drive not working in 8.1

    Updated to 8.1 and now my Iomega external hard drive (for weekly backup) is now not working. It shows up in the 'devices' but then backup will not recognise it as a valid option to continue my backup. Suggestions please?
    This question was solved.
    View Solution.

    Hi UKPOL,
    Please refer to this How to Geek article.
    Win 8.1 no longer supports a graphical interface for backing up files or creating system images. You must use powershell or Win 8.1's reset/refresh options.
    You can also create custom refresh images. Please see this article. The instructions also work with Win 8.1.
    You would have to use third party backup software for backing up files and folders.
    Jaco
    ****I am not an HP employee****
    Please give a" Kudos" if advice received is relevant or" Accept as Solution" if your problem has been solved.
    +++++++++++++++++++++++++++++++++++++++++++++++++++++
    H8 1380t CTO, Intel i7 3820
    16 GB DDR3
    Pegatron Motherboard- IPIWB-PB (Pittsburgh), Radeon HD 7570 1GB. Win 7 Home Premium upgraded to Windows 8.1 Pro.
    Envy Phoenix 810-150se, Intel i7 4820k
    12 GB DDR3
    Pittsburgh2 Mainboard, NVIDIA GTX 645- 2GB GDDR5. Win 8.1 Pro.
    HP 560z CTO AMD Phenom II X6 1090T
    16 GB DDR3.
    Radeon HD 6570
    Win 7 Home Premium upgraded to Win 7 Pro.
    HP ENVY 17t-j000 CTO Quad Edition Notebook. I7 4702mq
    12 GB DDR3
    Nvidia Graphics
    Win 8 Pro
    Errare humanum est.

  • Glowing white screen, reset not working

    my IPod touch won't respond to anything, I have browsed thru lots of help pages but nothing works.  I have a white glowing screen on my ipod touch and it won't hard reset, it won't connect to itunes on my computer, nothing happens or works.  what do I do now?  is it broken?

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

  • WRT54G2 reset not working

    Ok i've searched this board as much as I can and I still can't figure this out.
    I can't seem to login to my admin. the IP for me is 192.168.0.1 and I can't login. I tried resetting the router a few times and no luck.
    Is there ANY other way to reset the username and password?

    saeed1985 wrote:
    I tried the hard reset like OnnagokorO said and nothing worked. I tried re-installing and that seems to cause a problem. The installer can't seem to tell if the router is connected when it is searching for it. And i know EVERYONE is saying it's supposed to be 192.168.1.1 but no it's not that mine is 192.168.0.1 for some strange reason.
    I have a modem from my ISP that it's connected to and that modem uses 192.168.1.1.
    Your problem is the router AND the modem are trying to use the same IP address of 192.168.1.1. As mentioned before, disconnect the modem from the router, power cycle the router, then with a wired computer connected to the router, try to access the Linksys router via  its default IP address of 192.168.1.1. Once you reach the Basic Setup page, try changing the router's Local IP Address to 192.168.0.1 or 192.168.2.1 and then hit the Save Settings button. This new IP address becomes the new address that you use to access the router's administration pages. Once the setting has been saved reconnect the modem to the router and power cycle all the devices then see if you can access the internet and the new IP address for the router.

Maybe you are looking for