N8 Backup with OVI failure
I connect well with OVI and can sync all. No problems.
But when I want to make a backup of the full phone, it starts and stops everytime at about 80%. I can leave it for hours and it does not end. I then have to cancel the backup.
What is the problem ? Any known issue ?
Thanks.
I have to say that I don't know much about Ovi Sync, but have you edited those contacts somewhere else than in N8? Ovi Suite shouldn't delete those information on sync.
Similar Messages
-
E75 messaging settings lost after backup with OVI ...
Every time after an automatic backup with OVI suite, E75 automatically changes the messaging memory (from memory card to phone memory).
After that, of course, e-mail notifications in display also disappears.
Please correct this error.Every time after an automatic backup with OVI suite, E75 automatically changes the messaging memory (from memory card to phone memory).
After that, of course, e-mail notifications in display also disappears.
Please correct this error. -
Hi,
I am having a few problems with bootcamp on my imac. When i tried to move the bootcamp partition on windows 7 into free space, it crashed and turned off. Ever since i have had the error 'Missing operating system' and it fails to boot. I have some very important files on the bootcamp partition. Is it possible to recover these files or even to restore the bootcamp partition to it's original state? I do not have a backup of my bootcamp partition. Another problem i have is that ever since i tried to expand my macintosh HD partition into free space, when i hold alt while booting up (to choose which partition to boot like i normally do), the bootcamp partition has stopped appearing. This means that i cannot even boot the windows 7 bootcamp partition anymore!
So basically here are my 2 questions:
How can i restore/recover files from Bootcamp with Boot Failure - Missing operating system error?
How can i make the Bootcamp partition appear in Startup Disk and when i hold the option key while starting up my computer to allow me to boot windows 7?
Any solutions are very much apreciated!
Thanks!
I know that bootcamp (disk0s4) hasn't been fully deleted since it appears in disk utility (i cant do anything to it though)
And here is the error i see when i try to launch bootcamp (back when i was actually able to boot up bootcamp to the error screen)WinClone 3 is OS X and saves Windows image it makes for restore - that should work but you will have to try and you would need to make a new image unless it also works with a native Windows system restore image. It is now supported and has come a long way.
http://www.twocanoes.com/
Paragon Clone OS works and does disk-to-disk clone just like CCC you end up with two bootable drives. But does not work with your setup. It would let you clone and move your Windows install to an SSD or another disk drive though and be bootable.
During its clone process it checks for errors which is very helpful and lets you know - something CCC and others should adopt more of.
http://www.paragon-software.com/downloads/demo.html
I wish for our/my sake you had re-read and rewritten the long 'story' and broken it into a brief list of facts we needed.
OS X
Windows
Backup (though external is much safer) and you want bootable OS X clones as well as TimeMachine
https://support.apple.com/kb/HT1427
https://support.apple.com/kb/HT1553
There are a number of things to do like chkdsk and others as well as Windows DVD to do automatic system repairs and find out why.
AppleHFS - the abilty to mount and read HFS volumes can be notorious.
I would rearrange and redo your storage setup and how you use the 4-5 internal hard drive bays. -
Rman backup with standby database
Hi All,
I am looking for some suggestions for rman backup with standby database with datagaurd but no active DG. I wanted to do a rman tablespace backup. but I am stuck at sql 'alter system archive log current' in rman with standby as target. which gives following errors with or without noswitch clause
RMAN> sql 'alter system archive log current noswitch';
sql statement: alter system archive log current noswitch
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of sql command on default channel at 10/05/2013 18:15:12
RMAN-11003: failure during parse/execution of SQL statement: alter system archive log current noswitch
ORA-01109: database not open
Recovery Manager: Release 11.2.0.1.0
Oracle databaes Release 11.2.0.1.0 64 bit
OS:RHEL 6 x86-64 bit
Secondly, do I need to cancel manged recovery while taking rman backups on standby.
I scanned thru MOS but could find solutions for rman with active DG.
Thanks in advance726d07e6-b870-431f-8c22-a499c3ec4e0c wrote:
Hi All,
I am looking for some suggestions for rman backup with standby database with datagaurd but no active DG. I wanted to do a rman tablespace backup. but I am stuck at sql 'alter system archive log current' in rman with standby as target. which gives following errors with or without noswitch clause
RMAN> sql 'alter system archive log current noswitch';
sql statement: alter system archive log current noswitch
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of sql command on default channel at 10/05/2013 18:15:12
RMAN-11003: failure during parse/execution of SQL statement: alter system archive log current noswitch
ORA-01109: database not open
Recovery Manager: Release 11.2.0.1.0
Oracle databaes Release 11.2.0.1.0 64 bit
OS:RHEL 6 x86-64 bit
Secondly, do I need to cancel manged recovery while taking rman backups on standby.
I scanned thru MOS but could find solutions for rman with active DG.
Thanks in advance
"I scanned thru MOS but could find solutions for rman with active DG."
Howto make a consistent RMAN backup in an Standby database in Active DataGuard mode (Doc ID 1419923.1) -
I have been trying to get the Backup Site Server task to work in the Site Maintenance and consistanly get a failure. SQL writer not found. I have made sure the NT AUTHORITY had SA and that the sql writer was on. I have also tried using
the network path which would create the backup on the Site server with a failure. Although the errors are a little different. I have pasted my log file segment below. Any help would be greatly appreciated.
Registered connection to SQL server (db servername) and database TCprod03\CM_TC1. SMS_SITE_BACKUP
4/13/2015 7:00:11 PM 7468 (0x1D2C)
Registered connection to master database on SQL server (db servername). SMS_SITE_BACKUP 4/13/2015 7:00:11 PM
7468 (0x1D2C)
Initializing the status message reporting system... SMS_SITE_BACKUP 4/13/2015 7:00:11 PM 7468 (0x1D2C)
The path to the "Status Manager" inbox is "C:\Program Files\Microsoft Configuration Manager\inboxes\statmgr.box\statmsgs". SMS_SITE_BACKUP
4/13/2015 7:00:11 PM 7468 (0x1D2C)
SMS_STATUS_MANAGER is not running as part of this process, the SMS_EXECUTIVE to SMS_STATUS_MANAGER in-memory status message queue will not be used. SMS_SITE_BACKUP
4/13/2015 7:00:11 PM 7468 (0x1D2C)
Registered this process as a source of "SMS Server" events. SMS_SITE_BACKUP 4/13/2015 7:00:14 PM 7468 (0x1D2C)
Registered this process as a source of "SMS Client" events. SMS_SITE_BACKUP 4/13/2015 7:00:14 PM 7468 (0x1D2C)
Registered this process as a source of "SMS Provider" events. SMS_SITE_BACKUP 4/13/2015 7:00:14 PM 7468 (0x1D2C)
Status message reporting system initialized successfully. SMS_SITE_BACKUP 4/13/2015 7:00:14 PM 7468 (0x1D2C)
Locale set to OS value (English_United States.1252). SMS_SITE_BACKUP 4/13/2015 7:00:14 PM 7468 (0x1D2C)
SMS_SITE_BACKUP service 2012 started. SMS_SITE_BACKUP 4/13/2015 7:00:14 PM 7468 (0x1D2C)
STATMSG: ID=500 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_SITE_BACKUP" SYS=(site server servername) SITE=TC1 PID=8824 TID=7468 GMTDATE=Mon Apr 13 23:00:14.832 2015 ISTR0="SMS_SITE_BACKUP" ISTR1="" ISTR2=""
ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_SITE_BACKUP 4/13/2015 7:00:14
PM 7468 (0x1D2C)
Starting backup - Mon Apr 13 19:00:14 2015 SMS_SITE_BACKUP 4/13/2015 7:00:14 PM 7468 (0x1D2C)
SMS installation root directory = C:\Program Files\Microsoft Configuration Manager. SMS_SITE_BACKUP 4/13/2015 7:00:15 PM 7468 (0x1D2C)
Warning: SQL installation root directory is empty.The registry key "SOFTWARE\Microsoft\MSSQLServer\Setup\SQLPath" (populated by ConfigMgr setup) was found empty. SMS_SITE_BACKUP
4/13/2015 7:00:15 PM 7468 (0x1D2C)
Site server backup location = e:\SCCM_ Backup. SMS_SITE_BACKUP 4/13/2015 7:00:15 PM 7468 (0x1D2C)
SQL backup location = e:\SCCMSQL_Backup1. SMS_SITE_BACKUP 4/13/2015 7:00:15 PM 7468 (0x1D2C)
Verified that backup folder e:\SCCM_ Backup exists. SMS_SITE_BACKUP 4/13/2015 7:00:15 PM 7468 (0x1D2C)
Verified backup service has permission to access the backup folder e:\SCCM_ Backup SMS_SITE_BACKUP 4/13/2015 7:00:15 PM 7468 (0x1D2C)
STATMSG: ID=5055 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_SITE_BACKUP" SYS=(site server servername) SITE=TC1 PID=8824 TID=7468 GMTDATE=Mon Apr 13 23:00:15.117 2015 ISTR0="" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_SITE_BACKUP
4/13/2015 7:00:15 PM 7468 (0x1D2C)
LogEvent(): Successfully logged Event to NT Event Log. (4 - 48 - 1,073,746,879) SMS_SITE_BACKUP 4/13/2015 7:00:15 PM 7468 (0x1D2C)
Starting VSS initialization... SMS_SITE_BACKUP 4/13/2015 7:00:15 PM 7468 (0x1D2C)
Starting Asynchronous GatherWriterMetadata. SMS_SITE_BACKUP 4/13/2015 7:00:15 PM 7468 (0x1D2C)
Number of writers that responded: 15. SMS_SITE_BACKUP 4/13/2015 7:00:20 PM 7468 (0x1D2C)
Reading SMS Writer metadata... SMS_SITE_BACKUP 4/13/2015 7:00:21 PM 7468 (0x1D2C)
Number of FileIncludes: 0. SMS_SITE_BACKUP 4/13/2015 7:00:21 PM 7468 (0x1D2C)
Number of FileExcludes: 0. SMS_SITE_BACKUP 4/13/2015 7:00:21 PM 7468 (0x1D2C)
Number of Components: 7. SMS_SITE_BACKUP 4/13/2015 7:00:21 PM 7468 (0x1D2C)
Component 0 - TC1Backup\SiteServer\SMSServer\inboxes. SMS_SITE_BACKUP 4/13/2015 7:00:21 PM 7468 (0x1D2C)
FileGroupFile = C:\PROGRAM FILES\MICROSOFT CONFIGURATION MANAGER\INBOXES\* [Recursive: yes] SMS_SITE_BACKUP 4/13/2015
7:00:21 PM 7468 (0x1D2C)
Volume C:\ (that contains the file(s)) is marked as a candidate for snapshot. SMS_SITE_BACKUP 4/13/2015 7:00:21 PM 7468 (0x1D2C)
Component 1 - TC1Backup\SiteServer\SMSServer\Logs. SMS_SITE_BACKUP 4/13/2015 7:00:21 PM
7468 (0x1D2C)
FileGroupFile = C:\PROGRAM FILES\MICROSOFT CONFIGURATION MANAGER\LOGS\* [Recursive: yes] SMS_SITE_BACKUP 4/13/2015 7:00:21 PM 7468 (0x1D2C)
Volume C:\ (that contains the file(s)) is marked as a candidate for snapshot. SMS_SITE_BACKUP 4/13/2015 7:00:21 PM 7468 (0x1D2C)
Component 2 - TC1Backup\SiteServer\SMSServer\data. SMS_SITE_BACKUP 4/13/2015 7:00:21 PM
7468 (0x1D2C)
FileGroupFile = C:\PROGRAM FILES\MICROSOFT CONFIGURATION MANAGER\DATA\* [Recursive: yes] SMS_SITE_BACKUP 4/13/2015 7:00:21 PM 7468 (0x1D2C)
Volume C:\ (that contains the file(s)) is marked as a candidate for snapshot. SMS_SITE_BACKUP 4/13/2015 7:00:21 PM 7468 (0x1D2C)
Component 3 - TC1Backup\SiteServer\SMSServer\srvacct. SMS_SITE_BACKUP 4/13/2015 7:00:21 PM 7468 (0x1D2C)
FileGroupFile = C:\PROGRAM FILES\MICROSOFT CONFIGURATION MANAGER\SRVACCT\* [Recursive: yes] SMS_SITE_BACKUP 4/13/2015
7:00:21 PM 7468 (0x1D2C)
Volume C:\ (that contains the file(s)) is marked as a candidate for snapshot. SMS_SITE_BACKUP 4/13/2015 7:00:21 PM 7468 (0x1D2C)
Component 4 - TC1Backup\SiteServer\SMSServer. SMS_SITE_BACKUP 4/13/2015 7:00:21 PM 7468 (0x1D2C)
FileGroupFile = C:\Program Files\Microsoft Configuration Manager\install.map [Recursive: no] SMS_SITE_BACKUP
4/13/2015 7:00:21 PM 7468 (0x1D2C)
Volume C:\ (that contains the file(s)) is marked as a candidate for snapshot. SMS_SITE_BACKUP 4/13/2015 7:00:21 PM 7468 (0x1D2C)
Component 5 - TC1Backup\SiteServer\SMSbkSiteRegSMS.dat. SMS_SITE_BACKUP 4/13/2015 7:00:21 PM 7468 (0x1D2C)
FileGroupFile = C:\Program Files\Microsoft Configuration Manager\BackupTemp\SMSbkSiteRegSMS.dat [Recursive: no] SMS_SITE_BACKUP
4/13/2015 7:00:21 PM 7468 (0x1D2C)
Volume C:\ (that contains the file(s)) is marked as a candidate for snapshot. SMS_SITE_BACKUP 4/13/2015 7:00:21 PM 7468 (0x1D2C)
Component 6 - TC1Backup\SiteDBServer\SMSbkSQLSiteDB.dat. SMS_SITE_BACKUP 4/13/2015 7:00:21 PM
7468 (0x1D2C)
Dependency On SQL Writer , LogicalPath:\\xxxdb35\xxxdb35\TCprod03, ComponentName:CM_TC1 SMS_SITE_BACKUP 4/13/2015 7:00:21 PM
7468 (0x1D2C)
After GatherWriterMetadata SMS Writer status = FAILED_AT_FREEZE. SMS_SITE_BACKUP 4/13/2015 7:00:21 PM 7468 (0x1D2C)
Error: VSS_E_WRITERERROR_TIMEOUT. Error Code = 0x80,042,3f2. SMS_SITE_BACKUP 4/13/2015 7:00:21 PM 7468 (0x1D2C)
Info: Sending message to start the SQL Backup... SMS_SITE_BACKUP 4/13/2015 7:00:21 PM 7468 (0x1D2C)
Starting Prepare for backup. SMS_SITE_BACKUP 4/13/2015 7:00:23 PM 7468 (0x1D2C)
The System Provider VSS ID is 0,000,000,000,A2C,A78 SMS_SITE_BACKUP 4/13/2015 7:00:23 PM 7468 (0x1D2C)
Added volume containing C:\ to the snapshot set. SMS_SITE_BACKUP 4/13/2015 7:00:25 PM 7468 (0x1D2C)
Info: Starting Asynchronous PrepareForBackup... SMS_SITE_BACKUP 4/13/2015 7:00:25 PM 7468 (0x1D2C)
Info: Asynchronous PrepareForBackup finished... SMS_SITE_BACKUP 4/13/2015 7:00:25 PM 7468 (0x1D2C)
After PrepareForBackup SMS Writer status = STABLE. SMS_SITE_BACKUP 4/13/2015 7:00:25 PM 7468 (0x1D2C)
Info: Waiting for SQL to PrepareForBackup. SMS_SITE_BACKUP 4/13/2015 7:00:25 PM 7468 (0x1D2C)
Sleeping for 5 seconds... SMS_SITE_BACKUP 4/13/2015 7:00:26 PM 7468 (0x1D2C)
Sleeping for 5 seconds... SMS_SITE_BACKUP 4/13/2015 7:00:32 PM 7468 (0x1D2C)
Sleeping for 5 seconds... SMS_SITE_BACKUP 4/13/2015 7:00:37 PM 7468 (0x1D2C)
ERROR: SQL Backup task failed. Error message - Error: SQL Writer not found. SMS_SITE_BACKUP 4/13/2015 7:00:43 PM 7468 (0x1D2C)
STATMSG: ID=5052 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_SITE_BACKUP" SYS=(site server servername) SITE=TC1 PID=8824 TID=7468 GMTDATE=Mon Apr 13 23:00:43.658 2015 ISTR0="\\xxxdb35" ISTR1="CM_TC1;" ISTR2="Error:
SQL Writer not found." ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_SITE_BACKUP
4/13/2015 7:00:43 PM 7468 (0x1D2C)
StateTable::CState::Handle - (5052:3 2015-04-13 23:00:43.658+00:00) >> (0:0 2014-07-15 06:00:48.852+00:00) SMS_SITE_BACKUP
4/13/2015 7:00:43 PM 7468 (0x1D2C)
CStateMsgReporter::DeliverMessages - Queued message: TT=1401 TIDT=0 TID='EF736CF9-7214-4796-9C85-2549A9056D8D' SID=5052 MUF=0 PCNT=2, P1='TC1' P2='2015-04-13 23:00:43.658+00:00' P3='' P4='' P5='' SMS_SITE_BACKUP
4/13/2015 7:00:43 PM 7468 (0x1D2C)
CStateMsgReporter::DeliverMessages - Created state message file: C:\Program Files\Microsoft Configuration Manager\inboxes\auth\statesys.box\incoming\1w9gbbl3.SMX
SMS_SITE_BACKUP 4/13/2015 7:00:43 PM 7468 (0x1D2C)
Successfully send state change notification EF736CF9-7214-4796-9C85-2549A9056D8D SMS_SITE_BACKUP 4/13/2015 7:00:43 PM 7468 (0x1D2C)
Error: Sql Server could not prepare for the Backup. SMS_SITE_BACKUP 4/13/2015 7:00:43 PM 7468 (0x1D2C)
Aborting the backup process. SMS_SITE_BACKUP 4/13/2015 7:00:43 PM 7468 (0x1D2C)
Aborting the SQL backup process. SMS_SITE_BACKUP 4/13/2015 7:00:43 PM 7468 (0x1D2C)
Current state of SQL backup: [failed]. Aborting it. SMS_SITE_BACKUP 4/13/2015 7:00:44 PM 7468 (0x1D2C)
SMS_SITE_BACKUP failed. Please see previous errors. SMS_SITE_BACKUP 4/13/2015 7:00:44 PM 7468 (0x1D2C)
STATMSG: ID=5060 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_SITE_BACKUP" SYS=(site server servername) SITE=TC1 PID=8824 TID=7468 GMTDATE=Mon Apr 13 23:00:44.671 2015 ISTR0="Error: Sql Server could not prepare for the Backup."
ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_SITE_BACKUP 4/13/2015 7:00:44 PM 7468 (0x1D2C)
SMS_SITE_BACKUP service is stopping. SMS_SITE_BACKUP 4/13/2015 7:00:44 PM 7468 (0x1D2C)
STATMSG: ID=502 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_SITE_BACKUP" SYS=(site server servername) SITE=TC1 PID=8824 TID=7468 GMTDATE=Mon Apr 13 23:00:44.677 2015 ISTR0="SMS_SITE_BACKUP" ISTR1="" ISTR2=""
ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_SITE_BACKUP 4/13/2015 7:00:44
PM 7468 (0x1D2C)
Raised backup task failure alert. SMS_SITE_BACKUP 4/13/2015 7:00:44 PM 7468 (0x1D2C)
SMS_SITE_BACKUP service stopped. SMS_SITE_BACKUP 4/13/2015 7:00:44 PM 7468 (0x1D2C)
STATMSG: ID=501 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_SITE_BACKUP" SYS=(site server servername) SITE=TC1 PID=8824 TID=7468 GMTDATE=Mon Apr 13 23:00:44.717 2015 ISTR0="SMS_SITE_BACKUP" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_SITE_BACKUP 4/13/2015 7:00:44 PM
7468 (0x1D2C)Hi Richard I have already tried that and still failed, I did however get slightly further then before. We will be looking at using a direct database backup but this functionality is there and should work.
Registered connection to SQL server "dbserver" and database TCprod03\CM_TC1. $$<SMS_SITE_BACKUP><04-13-2015 19:00:11.055+240><thread=7468 (0x1D2C)>
Registered connection to master database on SQL server "dbserver". $$<SMS_SITE_BACKUP><04-13-2015 19:00:11.110+240><thread=7468 (0x1D2C)>
Initializing the status message reporting system... $$<SMS_SITE_BACKUP><04-13-2015 19:00:11.112+240><thread=7468 (0x1D2C)>
The path to the "Status Manager" inbox is "C:\Program Files\Microsoft Configuration Manager\inboxes\statmgr.box\statmsgs". $$<SMS_SITE_BACKUP><04-13-2015 19:00:11.151+240><thread=7468 (0x1D2C)>
SMS_STATUS_MANAGER is not running as part of this process, the SMS_EXECUTIVE to SMS_STATUS_MANAGER in-memory status message queue will not be used. $$<SMS_SITE_BACKUP><04-13-2015 19:00:11.152+240><thread=7468 (0x1D2C)>
Registered this process as a source of "SMS Server" events. $$<SMS_SITE_BACKUP><04-13-2015 19:00:14.793+240><thread=7468 (0x1D2C)>
Registered this process as a source of "SMS Client" events. $$<SMS_SITE_BACKUP><04-13-2015 19:00:14.796+240><thread=7468 (0x1D2C)>
Registered this process as a source of "SMS Provider" events. $$<SMS_SITE_BACKUP><04-13-2015 19:00:14.799+240><thread=7468 (0x1D2C)>
Status message reporting system initialized successfully. $$<SMS_SITE_BACKUP><04-13-2015 19:00:14.811+240><thread=7468 (0x1D2C)>
Locale set to OS value (English_United States.1252). $$<SMS_SITE_BACKUP><04-13-2015 19:00:14.828+240><thread=7468 (0x1D2C)>
SMS_SITE_BACKUP service 2012 started. $$<SMS_SITE_BACKUP><04-13-2015 19:00:14.830+240><thread=7468 (0x1D2C)>
STATMSG: ID=500 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_SITE_BACKUP" SYS="Site server" SITE=TC1 PID=8824 TID=7468 GMTDATE=Mon Apr 13 23:00:14.832 2015 ISTR0="SMS_SITE_BACKUP" ISTR1="" ISTR2=""
ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 $$<SMS_SITE_BACKUP><04-13-2015 19:00:14.832+240><thread=7468 (0x1D2C)>
Starting backup - Mon Apr 13 19:00:14 2015 $$<SMS_SITE_BACKUP><04-13-2015 19:00:14.837+240><thread=7468 (0x1D2C)>
SMS installation root directory = C:\Program Files\Microsoft Configuration Manager. $$<SMS_SITE_BACKUP><04-13-2015 19:00:15.104+240><thread=7468 (0x1D2C)>
Warning: SQL installation root directory is empty.The registry key "SOFTWARE\Microsoft\MSSQLServer\Setup\SQLPath" (populated by ConfigMgr setup) was found empty. $$<SMS_SITE_BACKUP><04-13-2015 19:00:15.106+240><thread=7468
(0x1D2C)>
Site server backup location = e:\SCCM_ Backup. $$<SMS_SITE_BACKUP><04-13-2015 19:00:15.108+240><thread=7468 (0x1D2C)>
SQL backup location = e:\SCCMSQL_Backup1. $$<SMS_SITE_BACKUP><04-13-2015 19:00:15.109+240><thread=7468 (0x1D2C)>
Verified that backup folder e:\SCCM_ Backup exists. $$<SMS_SITE_BACKUP><04-13-2015 19:00:15.112+240><thread=7468 (0x1D2C)>
Verified backup service has permission to access the backup folder e:\SCCM_ Backup $$<SMS_SITE_BACKUP><04-13-2015 19:00:15.115+240><thread=7468 (0x1D2C)>
STATMSG: ID=5055 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_SITE_BACKUP" SYS="Site server" SITE=TC1 PID=8824 TID=7468 GMTDATE=Mon Apr 13 23:00:15.117 2015 ISTR0="" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 $$<SMS_SITE_BACKUP><04-13-2015 19:00:15.117+240><thread=7468 (0x1D2C)>
LogEvent(): Successfully logged Event to NT Event Log. (4 - 48 - 1,073,746,879) $$<SMS_SITE_BACKUP><04-13-2015 19:00:15.125+240><thread=7468 (0x1D2C)>
Starting VSS initialization... $$<SMS_SITE_BACKUP><04-13-2015 19:00:15.127+240><thread=7468 (0x1D2C)>
Starting Asynchronous GatherWriterMetadata. $$<SMS_SITE_BACKUP><04-13-2015 19:00:15.291+240><thread=7468 (0x1D2C)>
Number of writers that responded: 15. $$<SMS_SITE_BACKUP><04-13-2015 19:00:20.925+240><thread=7468 (0x1D2C)>
Reading SMS Writer metadata... $$<SMS_SITE_BACKUP><04-13-2015 19:00:21.714+240><thread=7468 (0x1D2C)>
Number of FileIncludes: 0. $$<SMS_SITE_BACKUP><04-13-2015 19:00:21.716+240><thread=7468 (0x1D2C)>
Number of FileExcludes: 0. $$<SMS_SITE_BACKUP><04-13-2015 19:00:21.717+240><thread=7468 (0x1D2C)>
Number of Components: 7. $$<SMS_SITE_BACKUP><04-13-2015 19:00:21.719+240><thread=7468 (0x1D2C)>
Component 0 - TC1Backup\SiteServer\SMSServer\inboxes. $$<SMS_SITE_BACKUP><04-13-2015 19:00:21.720+240><thread=7468 (0x1D2C)>
FileGroupFile = C:\PROGRAM FILES\MICROSOFT CONFIGURATION MANAGER\INBOXES\* [Recursive: yes] $$<SMS_SITE_BACKUP><04-13-2015 19:00:21.733+240><thread=7468 (0x1D2C)>
Volume C:\ (that contains the file(s)) is marked as a candidate for snapshot. $$<SMS_SITE_BACKUP><04-13-2015 19:00:21.738+240><thread=7468 (0x1D2C)>
Component 1 - TC1Backup\SiteServer\SMSServer\Logs. $$<SMS_SITE_BACKUP><04-13-2015 19:00:21.739+240><thread=7468 (0x1D2C)>
FileGroupFile = C:\PROGRAM FILES\MICROSOFT CONFIGURATION MANAGER\LOGS\* [Recursive: yes] $$<SMS_SITE_BACKUP><04-13-2015 19:00:21.741+240><thread=7468 (0x1D2C)>
Volume C:\ (that contains the file(s)) is marked as a candidate for snapshot. $$<SMS_SITE_BACKUP><04-13-2015 19:00:21.745+240><thread=7468 (0x1D2C)>
Component 2 - TC1Backup\SiteServer\SMSServer\data. $$<SMS_SITE_BACKUP><04-13-2015 19:00:21.746+240><thread=7468 (0x1D2C)>
FileGroupFile = C:\PROGRAM FILES\MICROSOFT CONFIGURATION MANAGER\DATA\* [Recursive: yes] $$<SMS_SITE_BACKUP><04-13-2015 19:00:21.748+240><thread=7468 (0x1D2C)>
Volume C:\ (that contains the file(s)) is marked as a candidate for snapshot. $$<SMS_SITE_BACKUP><04-13-2015 19:00:21.752+240><thread=7468 (0x1D2C)>
Component 3 - TC1Backup\SiteServer\SMSServer\srvacct. $$<SMS_SITE_BACKUP><04-13-2015 19:00:21.754+240><thread=7468 (0x1D2C)>
FileGroupFile = C:\PROGRAM FILES\MICROSOFT CONFIGURATION MANAGER\SRVACCT\* [Recursive: yes] $$<SMS_SITE_BACKUP><04-13-2015 19:00:21.756+240><thread=7468 (0x1D2C)>
Volume C:\ (that contains the file(s)) is marked as a candidate for snapshot. $$<SMS_SITE_BACKUP><04-13-2015 19:00:21.760+240><thread=7468 (0x1D2C)>
Component 4 - TC1Backup\SiteServer\SMSServer. $$<SMS_SITE_BACKUP><04-13-2015 19:00:21.762+240><thread=7468 (0x1D2C)>
FileGroupFile = C:\Program Files\Microsoft Configuration Manager\install.map [Recursive: no] $$<SMS_SITE_BACKUP><04-13-2015 19:00:21.765+240><thread=7468 (0x1D2C)>
Volume C:\ (that contains the file(s)) is marked as a candidate for snapshot. $$<SMS_SITE_BACKUP><04-13-2015 19:00:21.768+240><thread=7468 (0x1D2C)>
Component 5 - TC1Backup\SiteServer\SMSbkSiteRegSMS.dat. $$<SMS_SITE_BACKUP><04-13-2015 19:00:21.770+240><thread=7468 (0x1D2C)>
FileGroupFile = C:\Program Files\Microsoft Configuration Manager\BackupTemp\SMSbkSiteRegSMS.dat [Recursive: no] $$<SMS_SITE_BACKUP><04-13-2015 19:00:21.772+240><thread=7468 (0x1D2C)>
Volume C:\ (that contains the file(s)) is marked as a candidate for snapshot. $$<SMS_SITE_BACKUP><04-13-2015 19:00:21.776+240><thread=7468 (0x1D2C)>
Component 6 - TC1Backup\SiteDBServer\SMSbkSQLSiteDB.dat. $$<SMS_SITE_BACKUP><04-13-2015 19:00:21.777+240><thread=7468 (0x1D2C)>
Dependency On SQL Writer , LogicalPath:\\"dbserver"\"dbserver"\TCprod03, ComponentName:CM_TC1 $$<SMS_SITE_BACKUP><04-13-2015 19:00:21.780+240><thread=7468 (0x1D2C)>
After GatherWriterMetadata SMS Writer status = FAILED_AT_FREEZE. $$<SMS_SITE_BACKUP><04-13-2015 19:00:21.965+240><thread=7468 (0x1D2C)>
~Error: VSS_E_WRITERERROR_TIMEOUT. Error Code = 0x80,042,3f2. $$<SMS_SITE_BACKUP><04-13-2015 19:00:21.967+240><thread=7468 (0x1D2C)>
~Info: Sending message to start the SQL Backup... $$<SMS_SITE_BACKUP><04-13-2015 19:00:21.969+240><thread=7468 (0x1D2C)>
Starting Prepare for backup. $$<SMS_SITE_BACKUP><04-13-2015 19:00:23.971+240><thread=7468 (0x1D2C)>
The System Provider VSS ID is 0,000,000,000,A2C,A78 $$<SMS_SITE_BACKUP><04-13-2015 19:00:23.976+240><thread=7468 (0x1D2C)>
Added volume containing C:\ to the snapshot set. $$<SMS_SITE_BACKUP><04-13-2015 19:00:25.224+240><thread=7468 (0x1D2C)>
~Info: Starting Asynchronous PrepareForBackup... $$<SMS_SITE_BACKUP><04-13-2015 19:00:25.225+240><thread=7468 (0x1D2C)>
~Info: Asynchronous PrepareForBackup finished... $$<SMS_SITE_BACKUP><04-13-2015 19:00:25.462+240><thread=7468 (0x1D2C)>
After PrepareForBackup SMS Writer status = STABLE. $$<SMS_SITE_BACKUP><04-13-2015 19:00:25.574+240><thread=7468 (0x1D2C)>
~Info: Waiting for SQL to PrepareForBackup. $$<SMS_SITE_BACKUP><04-13-2015 19:00:25.576+240><thread=7468 (0x1D2C)>
Sleeping for 5 seconds... $$<SMS_SITE_BACKUP><04-13-2015 19:00:26.700+240><thread=7468 (0x1D2C)>
Sleeping for 5 seconds... $$<SMS_SITE_BACKUP><04-13-2015 19:00:32.297+240><thread=7468 (0x1D2C)>
Sleeping for 5 seconds... $$<SMS_SITE_BACKUP><04-13-2015 19:00:37.893+240><thread=7468 (0x1D2C)>
ERROR: SQL Backup task failed. Error message - Error: SQL Writer not found. $$<SMS_SITE_BACKUP><04-13-2015 19:00:43.656+240><thread=7468 (0x1D2C)>
STATMSG: ID=5052 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_SITE_BACKUP" SYS="Site server" SITE=TC1 PID=8824 TID=7468 GMTDATE=Mon Apr 13 23:00:43.658 2015 ISTR0="\\"dbserver"" ISTR1="CM_TC1;" ISTR2="Error:
SQL Writer not found." ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 $$<SMS_SITE_BACKUP><04-13-2015 19:00:43.658+240><thread=7468
(0x1D2C)>
StateTable::CState::Handle - (5052:3 2015-04-13 23:00:43.658+00:00) >> (0:0 2014-07-15 06:00:48.852+00:00) $$<SMS_SITE_BACKUP><04-13-2015 19:00:43.661+240><thread=7468 (0x1D2C)>
CStateMsgReporter::DeliverMessages - Queued message: TT=1401 TIDT=0 TID='EF736CF9-7214-4796-9C85-2549A9056D8D' SID=5052 MUF=0 PCNT=2, P1='TC1' P2='2015-04-13 23:00:43.658+00:00' P3='' P4='' P5='' $$<SMS_SITE_BACKUP><04-13-2015
19:00:43.694+240><thread=7468 (0x1D2C)>
CStateMsgReporter::DeliverMessages - Created state message file: C:\Program Files\Microsoft Configuration Manager\inboxes\auth\statesys.box\incoming\1w9gbbl3.SMX $$<SMS_SITE_BACKUP><04-13-2015 19:00:43.709+240><thread=7468
(0x1D2C)>
Successfully send state change notification EF736CF9-7214-4796-9C85-2549A9056D8D $$<SMS_SITE_BACKUP><04-13-2015 19:00:43.710+240><thread=7468 (0x1D2C)>
Error: Sql Server could not prepare for the Backup. $$<SMS_SITE_BACKUP><04-13-2015 19:00:43.716+240><thread=7468 (0x1D2C)>
Aborting the backup process. $$<SMS_SITE_BACKUP><04-13-2015 19:00:43.719+240><thread=7468 (0x1D2C)>
Aborting the SQL backup process. $$<SMS_SITE_BACKUP><04-13-2015 19:00:43.885+240><thread=7468 (0x1D2C)>
Current state of SQL backup: [failed]. Aborting it. $$<SMS_SITE_BACKUP><04-13-2015 19:00:44.624+240><thread=7468 (0x1D2C)>
SMS_SITE_BACKUP failed. Please see previous errors. $$<SMS_SITE_BACKUP><04-13-2015 19:00:44.669+240><thread=7468 (0x1D2C)>
STATMSG: ID=5060 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_SITE_BACKUP" SYS="Site server" SITE=TC1 PID=8824 TID=7468 GMTDATE=Mon Apr 13 23:00:44.671 2015 ISTR0="Error: Sql Server could not prepare for the Backup."
ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 $$<SMS_SITE_BACKUP><04-13-2015 19:00:44.671+240><thread=7468
(0x1D2C)>
SMS_SITE_BACKUP service is stopping. $$<SMS_SITE_BACKUP><04-13-2015 19:00:44.675+240><thread=7468 (0x1D2C)>
STATMSG: ID=502 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_SITE_BACKUP" SYS="Site server" SITE=TC1 PID=8824 TID=7468 GMTDATE=Mon Apr 13 23:00:44.677 2015 ISTR0="SMS_SITE_BACKUP" ISTR1="" ISTR2=""
ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 $$<SMS_SITE_BACKUP><04-13-2015 19:00:44.677+240><thread=7468 (0x1D2C)>
Raised backup task failure alert. $$<SMS_SITE_BACKUP><04-13-2015 19:00:44.707+240><thread=7468 (0x1D2C)>
SMS_SITE_BACKUP service stopped. $$<SMS_SITE_BACKUP><04-13-2015 19:00:44.715+240><thread=7468 (0x1D2C)>
STATMSG: ID=501 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_SITE_BACKUP" SYS="Site server" SITE=TC1 PID=8824 TID=7468 GMTDATE=Mon Apr 13 23:00:44.717 2015 ISTR0="SMS_SITE_BACKUP" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 $$<SMS_SITE_BACKUP><04-13-2015 19:00:44.717+240><thread=7468 (0x1D2C)> -
I'm having issues with iCloud backup with comcast since iO6 update
I'm having issues with iCloud backup with comcast since iO6 update. I'm able to back via work wifi but not at home. Any ideas?
Hi BmoreHunter.
As far as using the bridge mode method you'd need to see what CLJDOhas to say, as that user is the only one that I see in this thread who used this method. The method that worked for me is different. I went out and bought a new modem. This made the most sense to me since the firmware in the unit that comcast gave me had issues and I am paying to rent the thing, I figured that I'll save some money if I just buy my own.
I ended up purchasing a motorola SURFboard eXtreme (model SB6121) for $70 (happened to be on sale) from my local Target. For another $7 I was able to secure a 2yr warranty against failure, which was my only hesitation in buying vs renting.
This modem should work just fine for you since you are a comcast customer. If you decide to go with a different modem, the important thing is to make sure that you purchase a modem that is compatible with the technology that your ISP (in this case comcast) uses. Also DOCSIS 3.0 is the "flavor" of cable modem you want as it will give you better performace than DOCSIS 2.0 devices (such as an older Motorola SURFboard).
Once you buy the modem you will have to call comcast and have them add the modem to your account. They'll ask for the MAC address of the modem, then send a re-set signal to it, so make sure you are home when you call and can connect/disconnect the modem as needed. After your modem is added to your account and up and running you can then connect your new AirPort Express to the modem (via ethernet cable) and you should be all set! -
Can I restore an earlier iCloud backup with only one visible?
I had to restore my iPhone 3GS because attempting to transfer purchases from it somehow made it unreadable by any program. When I tried to Restore it, the Restore failed, and the phone told me to try Restoring again. However, while it was deciding that it had failed to Restore itself, the defective phone backed itself up over my saved iCloud backup (it backed up again before I shut off auto-backup, because for some reason, I couldn't access Settings until it finished mis-installing the Apps in queu).
I couldn't back the phone up on my new computer since the transfer never completed and iTunes crashed due to that failure. All the data that had been successfully transferred from my phone to my computer before the Transfer failed was gone when I got iTunes up again. Now I only have an iCloud backup with the failed Restore, missing a lot of my products, data, and functionality. How do I restore the original backup that wasn't screwed up?I didn't have a Choose Backup option. In fact, when I attempted to Restore following this suggestion, my phone just immediately started the Restore process (from my computer, which had no backup saved to it, and it gave and continues to give no option to permit Restoration from iCloud) and ended up removing all data, apps, and accounts on my phone.
Now I have nothing.
My single iCloud backup appears to still exist, but it's useless because I can't do anything with it except delete it...and it's from after my phone crashed anyway, so it's not fully functional. But it would be better than what I have now, if I could actually get to it. -
TC wireless failed; Use as USB backup with Netgear R7000 as router?
TC wireless failed. Can TC (500Gb hard drive) be used as USB backup with Netgear R7000 as router or to nearby iMac?
No, you cannot use the USB to access an internal disk in the TC.
If its wireless has failed the rest will not be far behind.. the 500GB is Gen1 or early Gen2.. and they are simply failing in numbers.. you can probably repair it with a power supply, I kind of doubt the wireless itself would die but is symptomatic of failure of the unit as a whole.
If you want a backup just buy a large USB drive and plug it straight into the iMac. Choose the fastest interface you can afford.. ie firewire 800 is still head and shoulders better than usb2.. but usb3 or thunderbolt in the later machines are a big improvement.. with the later costing an arm and leg still, with most of the bits in between. -
Issue with ovi support page. issue with bought app...
first if all i cannot fill inn support form just becasue when im choosing issue tipe page is redirecting and i cant chose the issue tipe! email on [email protected] is also fails
i ve got some problems with ovi store. some apps which were bought while ago (they are showed in my content bookmark in phone ovi store), but when i try to redonload them it tells me that i must buy them again! i ve got all confirmation emails with numbers of my apps.
strangeness lies in the fact that all the apps which i try to redownload are newer versions than i had. but i repeat ALL this apps are showed in my content, and they were bought by me.Have the same problem.
reset my phone and now i can't download previously bought apps -
Required to take backup with out TSM in PROD server.
Dear all,
I required to take backup with out using TSM .
we have got error in TSM . so that i am getting error .
Prod server backup is working automated through TSM .
now i need to take Online backup with out using TSM like DEV and QA (Manual backup) .
For DEV and QA server backup is manual . i am simply moved the tape to tape library and fired the online backup as well same QA also .
Now my query is reqiured to take backup with out the help of TSM in PROD server . Is it possible ?
2 profiles are configured for Online backup and offline backup .
pls check the below profiles .
initSIDdaily.sap -
> Online backup .
initSIDweekly.sap -
> Offline backup
is there any parameter i need to change ?
Kindly adviseDear all ,
I have initialised the Tape IRPB01 , after i have try to tkae backup , i got below error .
BR0051I BRBACKUP 7.00 (48)
BR0055I Start of database backup: bedqreyq.ant 2010-07-12 13.19.44
BR0484I BRBACKUP log file: /oracle/IRP/sapbackup/bedqreyq.ant
BR0477I Oracle pfile /oracle/IRP/102_64/dbs/initIRP.ora created from spfile /ora
cle/IRP/102_64/dbs/spfileIRP.ora
BR0280I BRBACKUP time stamp: 2010-07-12 13.19.45
BR0319I Control file copy created: /oracle/IRP/sapbackup/cntrlIRP.dbf 15122432
BR0280I BRBACKUP time stamp: 2010-07-12 13.19.46
BR0057I Backup of database: IRP
BR0058I BRBACKUP action ID: bedqreyq
BR0059I BRBACKUP function ID: ant
BR0110I Backup mode: ALL
BR0077I Database file for backup: /oracle/IRP/sapbackup/cntrlIRP.dbf
BR0061I 42 files found for backup, total size 158434.742 MB
BR0143I Backup type: online
BR0112I Files will not be compressed
BR0130I Backup device type: tape
BR0102I Following backup device will be used: /dev/rmt0.1
BR0103I Following backup volume will be used: IRPB01
BR0280I BRBACKUP time stamp: 2010-07-12 13.19.46
BR0256I Enter 'c[ont]' to continue, 's[top]' to cancel BRBACKUP:
c
BR0280I BRBACKUP time stamp: 2010-07-12 13.19.52
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR0208I Volume with name IRPB01 required in device /dev/rmt0.1
BR0210I Please mount BRBACKUP volume, if you have not already done so
BR0280I BRBACKUP time stamp: 2010-07-12 13.19.52
BR0256I Enter 'c[ont]' to continue, 's[top]' to cancel BRBACKUP:
c
BR0280I BRBACKUP time stamp: 2010-07-12 13.19.55
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR0280I BRBACKUP time stamp: 2010-07-12 13.19.55
BR0226I Rewinding tape volume in device /dev/rmt0 ...
BR0351I Restoring /oracle/IRP/sapbackup/.tape.hdr0
BR0355I from /dev/rmt0.1 ...
BR0241I Checking label on volume in device /dev/rmt0.1
BR0280I BRBACKUP time stamp: 2010-07-12 13.19.55
BR0226I Rewinding tape volume in device /dev/rmt0 ...
BR0202I Saving /oracle/IRP/sapbackup/.tape.hdr0
BR0203I to /dev/rmt0.1 ...
BR0209I Volume in device /dev/rmt0.1 has name IRPB01
BR0202I Saving init_ora
BR0203I to /dev/rmt0.1 ...
BR0202I Saving /oracle/IRP/102_64/dbs/initIRPdaily.sap
BR0203I to /dev/rmt0.1 ...
BR0280I BRBACKUP time stamp: 2010-07-12 13.19.59
BR0198I Profiles saved successfully
BR0280I BRBACKUP time stamp: 2010-07-12 13.20.00
BR0315I 'Alter tablespace PSAPSR3 begin backup' successful
BR0202I Saving /oracle/IRP/sapdata1/sr3_1/sr3.data1
BR0203I to /dev/rmt0.1 ...
BR0278E Command output of 'LANG=C dd obs=64k bs=64k if=/oracle/IRP/sapdata1/sr3_
1/sr3.data1 of=/dev/rmt0.1':
dd: /oracle/IRP/sapdata1/sr3_1/sr3.data1: Invalid argument
BR0280I BRBACKUP time stamp: 2010-07-12 13.20.00
BR0279E Return code from 'LANG=C dd obs=64k bs=64k if=/oracle/IRP/sapdata1/sr3_1
/sr3.data1 of=/dev/rmt0.1': 2
BR0222E Copying /oracle/IRP/sapdata1/sr3_1/sr3.data1 to/from /dev/rmt0.1 failed
due to previous errors
BR0280I BRBACKUP time stamp: 2010-07-12 13.20.02
BR0317I 'Alter tablespace PSAPSR3 end backup' successful
BR0056I End of database backup: bedqreyq.ant 2010-07-12 13.20.00
BR0280I BRBACKUP time stamp: 2010-07-12 13.20.02
BR0054I BRBACKUP terminated with errors
BR0292I Execution of BRBACKUP finished with return code 5
BR0668I Warnings or errors occurred - you can continue to ignore them or go back
to repeat the last action
BR0280I BRTOOLS time stamp: 2010-07-12 13.20.02
BR0670I Enter 'c[ont]' to continue, 'b[ack]' to go back, 's[top]' to abort:
Kindly Advise -
I have just upgraded to Mavericks and have been using Time Machine on an external disk with Snow Leopard. Can I continue to backup with Time Machine on the same external disk or do I need a new disk since the operating system has changed?
Hi there,
I found that Time Machine in Mavericks will sort it all out for you. You shouldn't need to buy another backup drive, unless you have insufficient space left and can't afford to delete whats on there. It should just work fine. -
How can I create a new TC backup with ethernet, so I don't have to wait two days for a new wireless backup?
Several times in the last year, I've gotten a message that Time Machine needs to completely redo my backup. Using the wireless connection, this takes almost two days. Is there a way to do the backup with ethernet and then switch back to wireless? Thanks.May I know what is needed to make sure the MacBook is able to see Time Capsule on ethernet?
Connect an Ethernet cable from one of the LAN <-> ports on the 2Wire gateway to the WAN port (circle of dots icon) on the Time Capsule.
If AirPort Utility cannot "see" the Time Capsule now, you will need to perform a "hard reset" by holding in the reset button for 7-8 seconds or so and then reconfigure the Time Capsule. You can use the same Time Capsule name and password, etc. as before.
Configure the Time Capsule to "Create a wireless network" and select the Bridge Mode option when it appears during the setup using AirPort Utility.
Once the Time Capsule is configured, restart the entire network again. Power down everything, start the 2Wire first and then start each other device after that one at a time about a minute apart.
Now you can connect your Mac directly to one of the LAN <-> ports on the Time Capsule for the backup using another Ethernet cable. In general, about 20-25 GB per hour will transfer.
The Time Capsule will broadcast a much faster wireless network than the 2Wire can provide, so you might want to leave the setup "as is" for awhile after the first backup is complete. If you decide to use the Time Capsule as your main wireless access point, you would want to turn the wireless off on the 2Wire since two wireless networks in close proximity can create interference problems.
Or, if you want to use the wireless on the 2Wire, you could turn off the wireless on the Time Capsule. Then backups will occur over the 2Wire wireless, or over Ethernet.
I don't really recommend the "Join a wireless network" setting on the Time Capsule for most users, but you could go back to that setup as well if you want after the first backup is complete. -
How can i use "icloud backup" with ios 4.2.1?
How can i use "icloud backup" with ios 4.2.1? I tried to update my ihpone 3G wih the newest IOs. Seems not to be possible.
You cannot.
It requires ios 5.
Your iphone can only go to 4.2.1 -
Error in backup with verification in DB13
Dear all,
I am taking backup through DB13. There is two options in that with verification & without verification. when i am taking backup without verification , it is completed succesfuly, but when i am taking backup with verification, there is some error.
I am giving the error lines....
BR0428W File /oracle/BWD/sapreorg/bwd.data1 will be overwritten
BR0278E Command output of '/oracle/BWD/920_64/bin/dbv file=/oracle/BWD/sapreorg/bwd.data1 blocksize=8192':
DBVERIFY: Release 9.2.0.6.0 - Production on Thu Nov 6 16:08:07 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
DBV-00102: File I/O error on FILE (/oracle/BWD/sapreorg/bwd.data1) during end read operation (-1)
BR0280I BRBACKUP time stamp: 2008-11-06 16.08.07
BR0279E Return code from '/oracle/BWD/920_64/bin/dbv file=/oracle/BWD/sapreorg/bwd.data1 blocksize=8192': 1
BR0397E Verification of backup of /oracle/BWD/sapreorg/bwd.data1 using DBVERIFY failed due to previous errors
BR0056I End of database backup: bdzeuhyo.ant 2008-11-06 16.08.07
BR0280I BRBACKUP time stamp: 2008-11-06 16.08.10
BR0054I BRBACKUP terminated with errors
Plz help me to solve this error.
Thanks & Regards,
Ankit GuptaThere is no problem if you delete oracle/BWD/sapreorg/bwd.data1 prior to backup. It will come again since you are using Verify option with BRBACKUP.
What happens when you use verify option is Once the backup phase is complete, all the saved files are restored from the volume (for example, tape) in sequence to the temperory directory (in this case /oracle/BWD/sapreorg), decompressed (when compress = yes was used), read by the check program, and compared with the originals. And the check program being used is dbverify (command dbv).
The problem may not be with oracle/BWD/sapreorg/bwd.data1, it may be with the original datafile bwd.data1. What you can do is,
Run dbv on all your datafiles and check for errors. (recommend to run dbv when database is offline)
If dbv returns an error, then fix that.
If there are no errors reported by dbv, then your database is perfect.
The reason why BRBACKUP gave the error in such a case, as i see it is, since you are doing an online backup, the datafile is first backed up to a backup media. Since verify is ON, the file is restored to the temperory folder. Some changes (even if minor) may occur in the datafile within this time frame and the comparison fails.
Another chance is if there is no enough space in sapreorg and the restored datafile is not complete.
If you get an error like "DBV-00102: File I/O error on FILE (/oracle/BWD/sapdata1/bwd.data1) during end read operation (-1)" on the original datafile, then, resizing of the datafile may help.Not sure though.
Please refer the link http://help.sap.com/saphelp_nw04/Helpdata/EN/0d/d30c774a0c11d182b80000e829fbfe/content.htm -
When is Apple going to fix the problem with slow Time Machine backups with Mavericks?
I have been with Apple tech support and they got my Time Machine working by doing a spotlight re-indexing and a safe boot. This worked for about three days and I am back to very slow backups. It is impossible for Time Machine to back up every hour when it takes six hours to do the back up. I don't want to take hours to re-index with spotlight all the time. I think taking six hours to do an incremental backup is a bit much. I see that there are many people that have this trouble and it all started with an upgrade to Mavericks. The question is when is Apple going to fix this problem of slow backups with Time Machine for Mavericks. I have wasted more time than I care to. I am think of going back to Windows. I need good solid backups of my machine and Apple has taken it away with the new Mavericks. Oh, I am using the UBS 3.0 connection so the drive should not be the problem. Also this has occurred in about the last five months, so I am not sure this problem was in the original Marvericks.
Allen Thanks for your reply. All I can say is several months ago Time Machine quit working in a reasonable manner. Right now I have a Time Machine backup that has been running all night and still has three hours to go to backup 6 GB of data. I am using a OWC 1.5 TB drive connected directly to my MacBook with a USB 3.0 connection. In the resent past I have added Dropbox, GoogleDrive and a MAMP server on which I am using a program called Learning With Text from Sourceforge. There have been a lot of questions on the forum about people having very slow Time Machine back ups, so it appears to be a general problem. I should also state I am getting this very slow backup after doing the Spotlight re-indexing and the Safe Restart procedure that was told to me by apple support. I have a 750 GB drive in my MacBook Pro which I am constantly trying to keep at a 5% level of free space. This might be a problem also. However, I am working on a lot of things and like to have a lot of things on my drive. Also the heavily loaded drive has not be a problem in the past. This slow backup business started about three months ago, so something has happen in a very short time period. Now it seems even the procedure that Apple support gave me is not working. Currently I am in China and it is difficult to interact with Apple support to solve this problem, but because I am in China having my computer backed up is critical. I have run the EtreCheck and am attaching the results below. I would appreciate any suggestions. If necessary I will clear out more of my hard drive if that appears to be a solution. The Time Machine drive was recently reformed so I only have a few backups on it. I also don't run the Time Machine all the time as I don't want multi-hour backups running all the time. I run it every few days.
Here is the info from EtreCheck:
Hardware Information:
MacBook Pro (15-inch, Mid 2012)
MacBook Pro - model: MacBookPro9,1
1 2.6 GHz Intel Core i7 CPU: 4 cores
8 GB RAM
Video Information:
Intel HD Graphics 4000 - VRAM: 1024 MB
NVIDIA GeForce GT 650M - VRAM: 1024 MB
System Software:
OS X 10.9.2 (13C1021) - Uptime: 0 days 10:18:59
Disk Information:
APPLE HDD HTS727575A9E362 disk0 : (750.16 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 749.3 GB (54.06 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS31N
USB Information:
VIA Labs, Inc. USB3.0 Hub
OWC Elite Pro mini C 1.5 TB
EFI (disk1s1) <not mounted>: 209.7 MB
NewMBP-TimeMachine-1.1 (disk1s2) /Volumes/NewMBP-TimeMachine-1.1: 1.5 TB (691.6 GB free)
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Logitech USB Receiver
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded] com.LaCie.ScsiType00 (1.2.2) Support
[not loaded] com.lacie.driver.LaCie_RemoteComms (1.0.1) Support
[not loaded] com.oxsemi.driver.OxsemiDeviceType00 (1.28.0) Support
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
[not loaded] com.roxio.TDIXController (2.0) Support
[not loaded] com.seagate.driver.PowSecDriverCore (5.0.1) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.0.1) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.0.1) Support
[not loaded] com.seagate.driver.SeagateDriveIcons (5.0.1) Support
[kext loaded] com.symantec.kext.SymAPComm (11.2.2f3) Support
[not loaded] com.symantec.kext.confidentialData (1.4f5) Support
[not loaded] com.symantec.kext.filesecurity (1.4.3f19) Support
[kext loaded] com.symantec.kext.fw (1.0.3f5) Support
[kext loaded] com.symantec.kext.internetSecurity (1.3.2f5) Support
[kext loaded] com.symantec.kext.ips (1.3.1f7) Support
[kext loaded] com.symantec.kext.pf (4.2.1f7) Support
[not loaded] com.wacom.driver.HIDTablet (5.0.1) Support
Startup Items:
cma: Path: /Library/StartupItems/cma
MySQLCOM: Path: /Library/StartupItems/MySQLCOM
ParallelsDesktopTransporter: Path: /Library/StartupItems/ParallelsDesktopTransporter
ParallelsTransporter: Path: /Library/StartupItems/ParallelsTransporter
Tablet: Path: /Library/StartupItems/Tablet
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.versioncueCS4.plist Support
[loaded] com.barebones.authd.plist Support
[not loaded] com.barebones.textwrangler.plist Support
[loaded] com.bombich.ccc.plist Support
[loaded] com.mcafee.virusscan.eupdate.plist Support
[running] com.micromat.TechToolProDaemon.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[loaded] com.prosofteng.DriveGenius.locum.plist Support
[running] com.symantec.avscandaemon.plist Support
[running] com.symantec.deepsight-extractor.plist Support
[running] com.symantec.diskMountNotify.plist Support
[loaded] com.symantec.MissedTasks.plist Support
[loaded] com.symantec.navapd.plist Support
[running] com.symantec.navapdaemonsl.plist Support
[loaded] com.symantec.Sched501-1.plist Support
[loaded] com.symantec.Sched501-2.plist Support
[loaded] com.symantec.Sched503-3.plist Support
[loaded] com.symantec.Sched503-4.plist Support
[running] com.symantec.sharedsettings.plist Support
[running] com.symantec.symdaemon.plist Support
[running] com.symantec.symSchedDaemon.plist Support
[loaded] org.macosforge.xquartz.privileged_startx.plist Support
Launch Agents:
[loaded] com.adobe.CS4ServiceManager.plist Support
[running] com.lacie.safemanager.daemon.plist Support
[running] com.micromat.TechToolProAgent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.seagate.SeagateStorageGauge.plist Support
[failed] com.sogou.SogouServices.plist Support
[running] com.symantec.uiagent.application.plist Support
[running] net.culater.SIMBL.Agent.plist Support
[loaded] org.macosforge.xquartz.startx.plist Support
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.wondershare.mobilegodaemon.plist Support
User Login Items:
GeekTool
SIMBL Agent
QQ
Safari
Calendar
Google Drive
Dropbox
Day One
Dictionary
SymSecondaryLaunch
Internet Plug-ins:
Flip4Mac WMV Plugin: Version: 2.2.1.11 Support
FlashPlayer-10.6: Version: 13.0.0.182 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0
Flash Player: Version: 13.0.0.182 - SDK 10.6 Outdated! Update
AdobePDFViewer: Version: 9.5.5 Support
Default Browser: Version: 537 - SDK 10.9
QuickTime Plugin: Version: 7.7.3
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
RealPlayer Plugin: Version: (null) Support
Silverlight: Version: 4.0.51204.0 Support
JavaAppletPlugin: Version: Java 7 Update 55 Check version
Safari Extensions:
Video Converter: Version: 4.0.0
AllMyTube: Version: 4.1.0.0
Open in Internet Explorer: Version: 1.0
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
QQMail: Version: 1.0.2.0 - SDK 10.7 Support
txftn: Version: 1.0.0.6 Support
3rd Party Preference Panes:
Adobe Version Cue CS4 Support
Flash Player Support
GeekTool Support
Growl Support
Java Support
MacFUSE Support
MenuMeters Support
MySQL Support
Norton\nQuickMenu Support
Paragon NTFS for Mac ® OS X Support
Pen Tablet Support
Perian Support
TechTool Protection Support
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 697.84 GB Disk used: 647.49 GB
Destinations:
NewMBP-TimeMachine-1.1 [Local] (Last used)
Total size: 1
Total number of backups: 11
Oldest backup: 2014-03-18 15:09:46 +0000
Last backup: 2014-04-29 23:24:28 +0000
Size of backup disk: Too small
Backup size 1 < (Disk used 647.49 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
47% SymAVScanDaemon
7% Finder
7% WindowServer
2% mds
1% NortonAutoProtect
Top Processes by Memory:
385 MB NortonAutoProtect
262 MB mds_stores
180 MB Safari
139 MB WindowServer
115 MB Finder
Virtual Memory Information:
1.15 GB Free RAM
2.87 GB Active RAM
1.83 GB Inactive RAM
1.05 GB Wired RAM
1.02 GB Page-ins
380 MB Page-outs
I hope you can see something that can be fixed.
Maybe you are looking for
-
Contacts created in Phone app do not show in the Contacts list.
Hello, When I create a new contact from within the Phone app (i.e. from a "Recent" call) it does not show up in my contacts list. The new contact will show up in a search, but it only appears in the Phone app in the "Info" window. Any info. on why th
-
Hi, I am using a vary simple command to check how many rows will be selected. But the problem is that this is continiously running and nit finsihing, even if I will create a view on this and then try to acces that view same stuff happen, the table ha
-
TS3354 Cant view videos because the screen goes green
Hi i cant view my videos properly i bought them a few years now and have bought a new mac this time last year, but when i try and view any of my videos i bought the screen is all fuzzy and flicks onto green and slows down?? help
-
Help regarding a new enhancement
Hi, We got a new requirement stating that we need to have a link in user interface .So that when the manager clicks on that links we should display the users details like firstname,lastname,email for whom he is the manager in a table format. Can some
-
How can I reverse an app purchase and get a refund. I purchased a Weight Watcher app forgetting I needed to be a Weight Watchers member to log in.