N8 Belle : Mobile Documents not fully compatible

One of the best apps I found for my n8 is Mobile Documents. Unfortunately after the upgrade to Belle, some functions are no longer available. I'm talking about the quick launch icons in the screen (send,forward,delete). Now they only show as "..." and you have to access these functions from the menu. I reported this problem to the developer, let's wait for a fix!

@psychomania,
Yes, I've already contacted Foreca, I just forgot to mention that.
I posted here just to warn people about the ForecaWeather Belle issue.
Cheers.

Similar Messages

HTML5 Courses still not fully compatible on iPad or iPhone

Hi,
I've created several courses in Captivate 7, and using the HTML5 tracker, I've made sure all the elements in the courses are HTML5 supported. After publishing the courses and putting them in the LMS, I've tried using them on my iPhone and iPad, and I keep getting a warning message (all the courses work fine on my Mac). The message says:
"This course is not fully compatible with your current device. You may encounter problems with some lessons."
I can open the courses fine, and can navigate through them, but I'm not sure what parts are not compatible. I found one video that's not working, and it seems that the quiz questions aren't working. Otherwise, they seem to be functioning fine.
Any ideas or insight would be appreciated!

Can you tell me what the "ini" file is? The warning seems legitimate because the quiz questions aren't working on the iPad or the iPhone. So it seems like more than an automatic error message.

IDOC status 52 - Document not fully posted

Hi all,
On transferring HR data from R/3 to CRM shows two IDOCs, one which is posted- status 53, and the other with status 52 - document not fully posted. IDOC details show that central person for employee and relationships could not be created. The org. structure is replicated but employees are not.
Now there seems to be a reason behind this, this is the second time I am having problems with IDOCs during HR/CRM integration I have had the same problem when earlier a system client copy was taken and faced the IDOC transfer problem in the copied client. In fresh installations the integration works fine. Are there any system buffers to be refreshed or anything else on the technical side or am I missing settings on the CRM side ?
Please help ASAP.
Regards.
PS: the RFC's are working fine as well and already gone through note 550055

Dear Haseeb,
Thanx for your quick response.
For an employee(18730) 1st idoc has been generated on 03.06.2013 from ECC to CRM with these infotypes data (0,1,105) but idoc status is 52, and again changed on 04.06.2013 infotype (2) and idoc hase been generated but status is 52 in CRM and same again changed on 06.06.2013 infotype (6) and idoc hase been generated but status is 52 in CRM. But still Business partner has not been created in CRM.
We are facing for few employees related this issue.
I have been checked SLG1 and WE02 in both ECC & CRM, Please find the attached screen shots for your kind reference.
Please let me know is any other process to solve my issue.
Thanks & regards
Rajasekhar S

52 Application document not fully posted

Hi
I am using IDOCS and after output,this is the status of the IDOC:
52 Application document not fully posted
How can i see where the status is set in order to fix this warning and get a green status?This is an input idoc
Thanks

Solved it by myself,data read from the db was not correct

Inbound IDOC error - status code 52- application document not fully posted

Hi,
In Inbound IDOC, the status code is 52 ---> Application document is not fully posted(satus of the inbound idoc is in yello colour). I want to reprocess this idoc in BD87 t.code in order to convert the yellow colour to green colour. Before reprocessing the IDOC, i need to rectify the problem and then reprocess the idoc in bd87. am i correct? if yes, what i need to do to solve the error --->application document not fully posted. Please guide me friends.
Thanks in advance.
Regards,
Sri

HI
If you are FM to process the inbound IDOC,
possibilities are like below .
Reason 1 :
In partner profiles, check is it trigger immediately or not ? for particular partner profile which u r using .
reason 2 :
If you are using BDC code to update the data .if any screen contains error then also you will get the status in yellow .
reason 3 :
Have you tried with TCODE BD87 , might be it is processing error also .
i have worked on same probelm so if u r not solved with the issue after trying above 3 reasons .
reply me back .

Inboun IDOC status 52--Application document not fully posted

Hi,
In Inbound IDOC, the status code is 52 ---> Application document is not fully posted(satus of the inbound idoc is in yello colour). I want to reprocess this idoc in BD87 t.code in order to convert the yellow colour to green colour. Before reprocessing the IDOC, i need to rectify the problem and then reprocess the idoc in bd87. am i correct? if yes, what i need to do to solve the error --->application document not fully posted. Please guide me friends.
Thanks in advance.
Regards,
Sri

I am attaching how we documented the process in our troubleshooting guide. Graphics were not pasted.
21.3       Manually run IDOCs reported as 52.
It is possible that IDOCs are found in status 52 for the daily updates.   In principle IDOCs 52 can not be re-proceeed, but there is a way to push the appropriate data from a source system, e.g. ERP.    Following is the process.
21.3.1     You find IDOCs in status 52 in WE02.
21.3.1     Open table EDIDS.
Perform 2 searches for parameter STAPA2 and STAPA1 in status 52 and download the entries for each column to an MS Excel file.
21.3.2     Adjust the MS Excel file.
The strings STAPA2 and STAPA1 have to be truncated and separated into 3 different fields for processing: First 2 characters are the Plan Number, next 2 the Object Type, and next 8 the Object Number.
21.3.3     Manually process the entries via transaction PFAL from the source system, e.g. ERP.
The entries must be processed in the following order sorting by Object Name:
u2022     STAPA2s first, then STAPA1s.
u2022     Each organized by O, S, P, C, and CP.
21.3.3.1     Running individually for each entry.
By running PFAL with the individual entries: Plan number, Object Type, Object Number, Update mode, Target Logical System name ... the respective IDOC will be passed to target system for processing.
21.3.3.2     If there are many entries for processing.
If there are many STAPA2 and STAPA1 for processing.
u2022     Create a text file like the one below with the entries as mentioned above.
u2022     Logon into the source system and make sure CATTs are allowed..
u2022     Via SCAT, create a CATT that emulates the execution of PFAL entering Plan number, Object Type, Object Number, Update mode, Target Logical System name ... the respective IDOCs will be passed to the target system for processing.
. Create the text file with the entries.
. Execute the CATT ... the respective IDOCs will be passed to target system for processing.

Logic behind "sales documents, not fully confirmed"

HI MASTERS !
go to transaction VA03. Select the drop-down to search for an order. Execute the second tab titled u2018Sales documents, not fully confirmedu2019. The logic within this search operation is what i need.
plz, answer as soon as possible.

Hi,
The only BAPI available to get the sales order details is "BAPI_SALESORDER_GETLIST". This doesn't have the input criteria mentioned by you. You may have to write custom program to get the details as per your requirement.
Regards
Vinod

HS-20/AD-41 headset is not fully compatible with N...

The remote control works until the Music Player actually plays tracks, but it won't control the paused or stopped player if the keypad is locked on the phone or the Music Player is in the background. It means that if I paused or stopped the music for some reason I have to pull out the phone to unlock the keypad to get the remote control working again. And Nokia lists the N80 as compatible with this headset...

09-Oct-2006
03:53 PM
zvicohen wrote:
Same with an N73, so it's not just the N80 that is not compatible with the AD-41.
N73 is fully compatible, all you need to do to make the buttons work is plug the pop port without the 3.5 headphone jack connected to it. As soon as the phone recognize the headset, that is the time to plug in the 3.5 jack. Good luck!!!
There are 10 kinds of people...the ones who know binaries numbers and the ones who don't.

Can't hide rows; not fully compatible with Excel files

This program has not been fully thought out in its design. I wish I had not bought it; I mistakenly assumed that Apple would have made it fully compatible to other spreadsheet templates, with basic features equal to Excel.
If I want to use this program in my business, I have to rewrite my spreadsheet templates!!!
I will certainly think twice before paying good money for Apple software that is supposed to replace other business software, if I bother considering it at all.

Hi Glenn,
Welcome to Numbers. Yes you can hide rows and columns.
What I do is this:
1. To hide row 8, move mouse over the number 8 for row 8
2. You'll now see a drop down arrow to the right. Click on the arrow you'll see Hide Row.
3. The same technique applies to columns as well.
To further help you allow me to suggest reading the Numbers help file. Quote:
Hiding Rows and Columns
Hide specific rows or columns when you want to avoid showing or using them but don’t want to delete them. While a row or column is hidden, it can’t be reformatted, merged, split, or otherwise manipulated. However, any formula that uses a hidden cell isn’t affected, and sorting takes hidden values into account.
To hide a row or column:
Choose Hide Row or Hide Column from a row or column reference tab’s pop-up menu.
To show hidden rows and columns, choose Table > Unhide All Rows or Table > Unhide All Columns.
Rows or columns that are hidden in Numbers tables aren’t visible when the tables are copied into other iWork ’08 applications. To see the hidden rows, select the table and choose Format > Table > Unhide All Rows or Unhide All Columns.
Unquote
It's my hope all the above helps you. If this isn't what you're looking for then I've misunderstood your question so please post back. If it is what you're looking for please let us know as well.
Sincerely,
RicD

Four month old iPhone 5 not fully compatible with T-Mobile ???

I bought a brand new, un-locked iPhone 5 in December directly from Apple.. It is now only partially compatible with the T-Mobile network it's been on since it's original power on. *** ?????
In T-Mobile's announcement today, they indicated that Apple was building a 'special' version just for them. They also said I would have to go buy a brand new iPhone 5 to get the new 1700 band... NOT!!!
Can the existing, iPhone 5 be updated via firmware, to be compatible with he T-Mobile 1700 band network ????
Thanks in advance...

It was well known in the business pages of any newspaper, evening news, computer trades, online, etc., that T-Mobile would get the iPhone, probably around April. It was also known that after the merger fell through that T-Mobile would have to put together an LTE network in order to compete in the US marker. It was also known that T-Mobile used different frequencies than AT&T and would have to use a different band/frequency for their LTE network.
So how were you "ripped off"? As I said before who put a gun to your head and made you buy an unlocked iPhone to use on T-Mobile before T-Mobile was an official carrier?
The only person who ripped you off was you.

IPod Nano (2nd generation) not fully compatible with BOSE SoundDock

I can't get the remote control for my BOSE SoundDock to function with my newly purchased 2 GB iPod Nano (2nd generation).
The BOSE manual states that the remote control will not function properly if the iPod doesn't have the proper (or later) version of Apple software installed.
The "correct" software that BOSE identifies for the iPod mini (Nano) is version 1.2 or later.
This, however, appears only applicable to iPod 1st generation Nanos.
My brand new ipod Nano has version 1.1.2 software and iTunes has confirmed this to be the most current software for this 2nd generation unit.
Is this a common problem? It's hard to believe the BOSE unit does not cover 2nd generation iPod Nano software.
Other than the non-funtioning remote control, the BOSE unit works fine and with the BOSE-supplied black adpater for the Nano.
Dell PC Windows XP
Dell PC Windows XP

Actually, the BOSE SoundDock is compatible with the iPod Nano.
After troubleshooting with the BOSE staff, and some excellent customer service, the problem was narrowed down to the remote control device.
BOSE sent out a new remote control and the unit works fine with my iPod Nano.
Appreciate all who offerred assist in this matter.
Dell PC Windows XP

Adobe Flash 10.0.42.34 not fully compatible with OS X 10.6.2

Every time I try to run Flash content on my computer, I am told that I need to install Rosetta (32-bit backward compatibility).   When is Adobe going to provide a 64-bit version of Flash? I mean, Snow Leopard has been out for some time, I would think that this would have been resolved by now.

It requires 10.9 or later.
Upgrading to Mavericks
You can upgrade to Mavericks from Lion or directly from Snow Leopard. Mavericks can be downloaded from the Mac App Store for FREE.
Upgrading to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Download Mavericks from the App Store. Sign in using your Apple ID. Mavericks is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks- System Requirements
    Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

Application document not posted / business partner in RPM

Hi,
We tried to import data from ECC HCM System to RPM system, by using tcode PFAL, and when we review the result with tcode bd87 (receiver system) these errors occurs:
51 Application document not posted.
52 Application document not fully posted.
The result it's that we have the HCM Organization created, the positions created, but instead of having person created, we have object "central person". So, in the transaction BP in RPM we can not see the business partner like employee.
In the sap note 1311399 we saw the reason why we have central person created, and not the object person. That is because exits infotype 105 subtype 01.
How can we create these persons like business partner in RPM?
Thanks in advance.
Albio
Edited by: Albio Vivas on Oct 20, 2010 12:02 AM

Hi,
In the receiver system (RPM) we don't have this program "hr_sync_person", but we have this one: "HRALXSYNC".
In the source system (ECC HR) we have both programs hr_sync_person and hralxsync.
1) Are the same programs or similar?
2) The program must be executed in the receiver system (RPM) or in the Origin HR system (ECC)?. (remember we don't have in the receiver system the program hr_sync_person).
3) I tried with the hralxsync in the RPM system (receiver hr data), we executed and we don't have a buttom "repair" instead of that there is a buttom "start syschronization procedure with partner (F8)". But nothings seems to happens.
Thanks,
Albio.-

Weird delays opening files related to Mobile Documents folder

This is a very weird situation. With iCloud enabled, I get a weird delay when opening files.
What happens:
I open basically any sort of file (word, pages, zip file, etc).
I will get the spinning beachball for 5-10 seconds and cannot interact with the program in any way.
The following appears in the System Log:
10/23/11 8:39:41.312 PM librariand: changing log level to 5
10/23/11 8:39:41.526 PM librariand: collection does not match configured AppleID ([email protected]), removing existing collection
10/23/11 8:39:44.030 PM librariand: items added to file://localhost/Users/username/Library/Mobile%20Documents/ mobile documents not enabled (10)
10/23/11 8:39:45.033 PM librariand: items added to file://localhost/Users/username/Library/Mobile%20Documents/ mobile documents not enabled (9)
10/23/11 8:39:46.069 PM librariand: items added to file://localhost/Users/username/Library/Mobile%20Documents/ mobile documents not enabled (8)
10/23/11 8:39:47.073 PM librariand: items added to file://localhost/Users/username/Library/Mobile%20Documents/ mobile documents not enabled (7)
10/23/11 8:39:48.077 PM librariand: items added to file://localhost/Users/username/Library/Mobile%20Documents/ mobile documents not enabled (6)
10/23/11 8:39:49.081 PM librariand: items added to file://localhost/Users/username/Library/Mobile%20Documents/ mobile documents not enabled (5)
10/23/11 8:39:50.102 PM librariand: items added to file://localhost/Users/username/Library/Mobile%20Documents/ mobile documents not enabled (4)
10/23/11 8:39:51.106 PM librariand: items added to file://localhost/Users/username/Library/Mobile%20Documents/ mobile documents not enabled (3)
10/23/11 8:39:52.110 PM librariand: items added to file://localhost/Users/username/Library/Mobile%20Documents/ mobile documents not enabled (2)
10/23/11 8:39:53.114 PM librariand: items added to file://localhost/Users/username/Library/Mobile%20Documents/ mobile documents not enabled (1)
10/23/11 8:39:53.114 PM librariand: looks like mobile documents are really disabled
In addition, each time this happens it seems to create an additional "Mobile Documents" folder in ~/Library/, see below:
Mobile Documents
Mobile Documents.delete.Sun Oct 23 20/39/41 2011
Mobile Documents.delete.Sun Oct 23 20/39/41 2011
Mobile Documents.delete.Sun Oct 23 20/40/38 2011
Mobile Documents.delete.Sun Oct 23 20/49/10 2011
Mobile Documents.delete.Sun Oct 23 20/49/10 2011
This issue occurs whether or not I have "Documents & Data" selected for sync in iCloud preferences.
Interestingly enough, if I immediately open another file after this occurs, the issue does not happen again right away. However, if I wait about two minutes and open one, it does occur every time.
(Note: My acount name and email address have been replaced with "username" but the log is otherwise unaltered)

I have the exact same problem. It's been driving me crazy ever since I "upgraded" to Lion. I finally traced it to iCloud and the Mobile Documents folder using Console, which lead me here.
Any time I launch Pages, QuickTime, or TextEdit (TextEdit, really?), the first file I try to open gives me the spinning beachball of death for about 10 seconds before I can do anything.
I did numerous searches regarding the spinning beach ball of death in relation to those apps and found nothing germaine before I specifically searched for "collection does not match configured AppleID." This makes me think that a lot of other people are having this problem who just haven't discovered this thread.
I will try disabling "Documents & Data" but an actual fix would be greatly appreciated. "It just works" has not applied to many aspects of iCloud. I thought MobileMe had its issues, but iCloud is a mess in my personal experience, well beyond this issue. I appreciate the potential and am clinging to some faith in Apple, but Lion and iCloud have been REALLY testing my patience. Snow Leopard was a rock. This all seems like beta software hastily ported from iOS.

Vector shapes not backwards compatible?

Hello,
I work in an office where some people are on differnt versions of Photoshop while I am using CC. When I create vector objects and save them in a file they sometimes show up as all black in older versions of photoshop. Is there a process that I can use that will get around this issue? These files are passed back and forth and I understand that I may loose the ability to use some of the newer features with CC in order to avoid issues. But I need to use the vector options on a daily basis.
I see another issue that people are running into that I also deal with alot and that is the crop tool adjustments. When you use the crop tool it sometimes makes the vectors all out of wack.
Any help is apreciated!
Thank you,
Andrew H

You have your compatibilities backwards. Older versions are not forward compatible for newer features are not in older versions of Photoshop so compatibility is not possible. Newer versions of Photoshop for the most part are backwards compatible with older versions of Photoshop. However Adobe drops the ball at times. Since CS4 Photoshop is not fully backwards compatible in fact Photoshop CS4 and newer are not fully compatible with themselves. There are bugs and compatibility issues with options in the adjustment panels fly-out menu. Option in it can change Photoshop default operation which not only makes it not backwards compatible they make some feature in the current version work in an inconsistent manner. The code implementing these options are not without their bug. Photoshop does not always operate the way the options are set.

N8 Belle : Mobile Documents not fully compatible

Similar Messages

Maybe you are looking for