N8 black screen after updated to the new version 0...

Hello everyone, how are you doing?
My Nokia N8 stop working at all, as it just gives me a little bit vibration when I push power bottom and nothing occurred on the screen its black screen. That’s happen after I made update for the software using Nokia software update, but in the middle of the operation I got an error message “update can’t completed” …
So please advise me with your experience.
R,
Amr

Was it an OTA or Ovi Suite update? Try rebooting the phone by pressing and holding the power button for at least 8 seconds until the phone buzzez 3 times in quick succession. Then try restarting your phone again. 
Another thing you could try if your initial update attempt was through OTA is to try connecting and updating your phone using Ovi Suite.
If that does not work then you may need to hard reset your phone but there are various issues with that at the moment, such as losing your data uinless you have a backup and other options such as the lost of some functionality which at the moment can only be restored by reinstalling Qt or by a Nokia Care Point. 
/t5/Nseries-and-S60-Smartphones/N8-Maps-problem-af​ter-hard-reset/td-p/783327

Similar Messages

  • Problem with new version 4.3.2 apps not working " after update to the new version "

    Problem with new version 4.3.2 apps not working " after update to the new version "
    i was in 4.3.1 then i do the update , but now after update i face this problem , so what i Supposed to do ?!!

    Hi There
    Had the same problem as you. App would terminate when launched.
    Solution to working You Tube app:
    -Go to playstore
    - Uninstall app (it doesn't remove the app, only removes the update)
    - "Et Voila", working again.
    This doesn't correct the problem, it's just a workaround for you to be able to use youtube app again.
    Hope it helped.
    Best Regards

  • Can't open numbers on my iPhone 5S and iPad mini (1st Gen.) after updating to the new version 2.0.1. Please help!

    Can't open numbers on my iPhone 5S and iPad mini (1st Gen.) after updating to the new version 2.0.1. Please help!

    Okay , you should only delete EMPTY DUPLICATED folders, not preview folders or any others. I would put them all back. Then just delete any DUPLICATED EMPTY folders, do not disturb any other folders. On iOS switch off DOCUMENTS AND DATA under ICLOUD in SETTINGS. Do this on all iOS devices not just the one. Once deleted DUPLICATE FOLDERS on the mac in MOBILE FOLDERS then exit the LIBRARY. Open PAGES on your MAC and view folders on icloud. Check everything is all there as expected. If okay then DELETE and re-install PAGES app on iOS - THEN switch on DATA and DOCUMENTS in ICLOUD. Now open PAGES. If you have Time Machine on you can recover any 'lost' doc files and restore them from your mac from pages application. Try the process again and do not disturb any folders other than ones I mentioned as this is the system files LIBRARY. It is not a place to be over zealous in moving, altering and deleting folders and files. Take care please.

  • After updating to the new version of Firefox, then the Adobe update, when I startup firefox again it says that adobe needs my premision to do something then the GetPlus + (R) crashes. Why?

    I just updated to the new version of Firefox, then updated the Adobe flash as suggested by Firefox, but when ever I open Firefox again it says Adobe needs my permission to do something then it says that the GetPlus + (R) has crashed and apparently Adobe never fully updates. Is this a huge problem? If so how do I fix it??
    Thanks
    == This happened ==
    Every time Firefox opened
    == I updated to the new Firefox, then updated the Adobe flash player as Firefox suggest.

    Hi Charles,
    You can just download the direct installer for Flash.
    *Save this link to your computer: http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe
    *Close Firefox
    *In Control Panel -> Programs and Features, uninstall any Adobe Download Manager, GetPlus, or similar entries.
    *Also uninstall Flash.
    *Then run the install_flash_player.exe you downloaded earlier.
    That should get Flash working again (check that it is listed under Tools -> Add-ons -> Plugins)
    See also [[Managing the Flash Plugin]]

  • HT4623 after updating to the new version from itunes, it says 'no service'. how do i activate it?

    I updated my itunes first and then updates to the new IOS. I cant activate the phone as it gives the message 'sim not inserted' tried reinserting the sim and with a different sim. but not able to activate it. Pls. help.

    First see if you're sim card went bad by inserting it into another phone to see if you get service on that device. If the other device picks up the sim card then you could try doing a factory restore on you're iPhone.
    Hope this helps

  • There is a problem with firefox find option in new version ! i have noticed after updating to the new version the find option has become case sensitive

    Now the find option in the firefox page which can be activated by pressing F3 is Case sensitive and this caused me a lot of problems
    this problem wasnt there in older firefox versions

    Sorry, that "mail" thing isn't a standard part of Firefox. Seek support from the developer of the add-on you have installed that added that feature to Firefox. Support contact information should be on the download page for that extension.

  • After updating to the new ios i can Undock ipad but cannot move it across the screen anymore! I'm using the ipad 3. Help anyone??

    Hello
    After updating to the new iOS on my ipad 3 I find that I can no longer move the undocked keyboard across the screen to my desired location as I used to. Does anyone else have the same issue?

    Here's the writeup from the iOS 6 Manual for iPad about moving and splitting the keyboard:
    Keyboard layouts
    On iPad, you can type with a split keyboard that’s at the bottom of the screen, or undocked and in the middle of the screen.
    Adjust the keyboard: Touch and hold , then:
    Use a split keyboard: Slide your finger to Split, then release.
    Move the keyboard to the middle of the screen: Slide your finger to Undock, then release.
    Return to a full keyboard: Slide your finger to Dock and Merge, then release.
    Return a full keyboard to the bottom of the screen: Slide your finger to Dock, then release. Turn Split Keyboard on or off: Go to Settings > General > Keyboard > Split Keyboard.

  • Why isn't my device showing up on either the sidebar or upper right hand corner of the screen? This has only occurred after updating to the new ITunes update?

    Why isn't my device showing up on either the sidebar or upper right hand corner of the screen? This has only occurred after updating to the new ITunes update?

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or               
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests

  • M5400 - Black screen after updating BIOS

    As the title says, I've got this unwanted black screen after updating BIOS with update utility from here http://support.lenovo.com/us/en/downloads/ds037429
    What I've tried :
    - power / battery out, pressing power button several times for short / long and longer time
    - BIOS battery out for about half an hour
    - wincrisis with USB bootable stick and BIOS extracted from BIOS update utility from support.lenovo
    - different combinations of keys such as : FN + B / F / R +/- win key
    What should I do next except finding a hammer ?

    Hey,
    I am having the same problem, I was updating my bios.. followed all directions which is necessary to update them.
    And then when it was almost ready it said "Bios update is not responding" so I waited... and waited because I did not want to abort it but then Vista aborted it for me.
    Well at first it did not seem to be a problem but then I noticed that I could not click anything (was still in windows @ that time did not reboot yet) then I wanted to reboot but nothing worked.. Pressing off button for a time to shut down did not work.. So eventually power was out. And it shut down.
    So I hooked it up again but nothing happened. Pressing the "on" button made it start.. The DVD-drive loaded for a second but... that is it just a black screen :S
    Going to bring it back to the shop tomorrow.
    Suxors

  • How do i prevent restoring my iphone4 after updating to the new ios?

    I decided tonight to finally update to the new version of ios7. I already updated to 7 when it came out but have been avoiding the newer versions of it...until tonight. After it loaded the update and tried turning on, it showed the charger chord inserted into itunes. So i did just that. But then itunes told me that my phone needed to be restored!!!! Holy ****!!!!!! Im going to lose all of my photos. So many memories. I cant lose them...I'm so upset with apple. This is the third time something like this has happened. When you update your ios, youre not supposed to lose any data! Is there ANYTHING i can do? I really need your help, guys. Will everything still be there if i downgrade to the older ios? And if so, how do i do that? I'm so technologically challenged. But I will tell you, I'm never buying an apple product ever again after all this.

    If this is the third time that this has happened to you, I don't blame you for being upset. On the other hand, after the second time, you should have learned the importance of backing up your iOS devices and apparently you didn't do that or you wouldn't be in such a panic.
    You cannot downgrade the iOS, You have to restore your phone now and all of the contents will be erased. I think you know that though, and I think that you know that there is no way around it either.

  • I receive my daughters sms after updating to the new software

    Hi all,
    after updating to the new software on my iphone, I suddenly receive and sends sms etc to my daughters mobile phone. How can that be stopped? Has is someting to do with using same appleid?
    Bo Christensen
    +45 40 16 66 55

    Diego_Onofre wrote:
    Hey ! Today I tried to make the update for my iPhone 4 and it died. I get the same type of message your getting and nothing will make it respond or set it back to the normal settings. Did you call apple? did you get a new phone? were you able to fix it? I'm really disappointed on apple and iphone.
    if you were to read the ops original post he said hes getting a new phone....

  • Problem with update MUSE CC 2014.2 (october 6). after upgrading to the new version of Muse crashes very often (out without notice).

    Problem with update MUSE CC 2014.2 (october 6). after upgrading to the new version of Muse crashes very often (out without notice).

    HELP! i can't get ANYTHING done in the new muse - keeps closing.  once it crashes - i can't get the file back open!
    i've lost all my work!
    from my desktop - when it stared happening was with the updated version:
    Logging in build 2014.2.1.10 started at: Mon Nov 03 13:36:38 2014
    ========================================
    [00:00:42.416] Opening file '\\D-LAPTOP\_websites\dsbees muse\dsbees.muse' with status:success size:9797632 mod Date:Tue Sep 23 15:51:42 GMT-0500 2014 highestUID: 3548
    [00:01:03.898] Preparing to Save As over "\\D-LAPTOP\_websites\dsbeesTWO\dsbeesTWO.muse" exists: true
    [00:01:17.516] SaveAs complete for file '\\D-LAPTOP\_websites\dsbeesTWO\dsbeesTWO.muse' file size:9830400 mod Date:Mon Nov 3 13:37:51 GMT-0600 2014 highest UID:3551
    Build 232: Mon Nov 3 19:41:03 2014 UTC: Error: CSI: OOBE: Serial Number: Error Code: O-10 Error Message: Unable to retrieve the serial number (Note: this may not be an error)
    Build 232: Mon Nov 3 19:41:03 2014 UTC: Error: CSI: OOBE: Serial Number: Error Code: O-10 Error Message: Unable to retrieve the serial number (Note: this may not be an error)
    Build 232: Mon Nov 3 19:41:07 2014 UTC: Error: CSI: OOBE: Serial Number: Error Code: O-10 Error Message: Unable to retrieve the serial number (Note: this may not be an error)
    Build 232: Mon Nov 3 19:41:21 2014 UTC: Error: CSI: IMS: Connect: Error Code: I-200 Error Message: No Account
    Build 232: Mon Nov 3 19:41:21 2014 UTC: Unknown IMS error 'SHARED_NOACCT_ERROR' has occurred when retrieving IMS token.
    Build 232: Mon Nov 3 19:41:57 2014 UTC: Opening file '\\D-LAPTOP\_websites\dsbees muse\dsbees.muse' with status:This Adobe Muse site file requires a newer version of Adobe Muse. Please update to the latest version. size:9797632 mod Date:Tue Sep 23 15:51:42 GMT-0500 2014
    Build 232: Mon Nov 3 19:41:57 2014 UTC: This Adobe Muse site file requires a newer version of Adobe Muse. Please update to the latest version.
    Logging in build 2014.2.1.10 started at: Mon Nov 03 13:43:17 2014
    ========================================
    [00:00:21.481] Opening file '\\D-LAPTOP\_websites\dsbeesTWO\dsbeesTWO.muse' with status:success size:9830400 mod Date:Mon Nov 3 13:37:51 GMT-0600 2014 highestUID: 3551
    [00:00:30.373] AssertInDebug: Unable to run recovery. User file remains locked after 5 second pause.-assertInDebugOnly+DataBase/recover+MuseSite$/recover+MethodInfo-2886+DataBase$/run Recovery+apply+UIComponent/callLaterDispatcher2+UIComponent/callLaterDispatcher+end stack
    [00:00:30.404] Failed to recover file:\\D-LAPTOP\_websites\dsbeesTWO\dsbeesTWO.muse
    [00:00:30.420] Calling openConnection for file that doesn't exist? C:\Users\Owner\AppData\Roaming\com.adobe.AdobeMuseCC.2014.2\Local Store\Recovery\JXRoDn335LE0UosOdoStnQ Parent folder exists.
    [00:00:34.429] open of SQL connection failed for C:\Users\Owner\AppData\Roaming\com.adobe.AdobeMuseCC.2014.2\Local Store\Recovery\JXRoDn335LE0UosOdoStnQ
    [00:00:34.429] Failed to open mini-save connection B "C:\Users\Owner\AppData\Roaming\com.adobe.AdobeMuseCC.2014.2\Local Store\Recovery\JXRoDn335LE0UosOdoStnQ" Doesn't exist. Folder exists. error:SQLError: 'Error #3125: Unable to open the database file.', details:'Connection closed.', operation:'open', detailID:'1001'
    [00:00:34.429] EXCEPTION:[SQLC/internalOpen] SQLError: 'Error #3125: Unable to open the database file.', details:'Connection closed.', operation:'open', detailID:'1001'-SQLConnection/internalOpen+SQLConnection/open+DataBaseConnectionWrapper/o penConnection+MethodInfo-28954+EventDispatcher/dispatchEventFunction+EventDispatcher/dispa tchEvent+MethodInfo-28938+end stack
    [00:00:34.445] AlertAndExit because of: [SQLC/internalOpen] SQLError: 'Error #3125: Unable to open the database file.', details:'Connection closed.', operation:'open', detailID:'1001'

  • Hello after updating to the new iTunes i got a box saying that i needed a new version of Apple Mobile Device Support and ihat i should uninstall iTunes and Apple Mobile Device Support then install iTunes again.  I have been unable to uninstall itunes

    Hello- after updating to the new iTunes i got a box saying that i needed a new version of Apple Mobile Device Support and ihat i should uninstall iTunes and Apple Mobile Device Support then install iTunes again.  Problem is I have been unable to uninstall itunes, can't find the installation files .msi.  I'm using Windows XP. 
    Help!

    Problem is I have been unable to uninstall itunes, can't find the installation files .msi.
    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • After updating to the new ios5 with my 4S , no wifi connection (at home), problem when sending or receiving email

    After updating to the new ios5 with my 4S, no wifi connection and problem when sending or receiving email. I had no issue before the update... I am very disappointed

    Did you already try to reset your network settings in Settings/General/Reset?

  • Lost my apps and music after updating to the new OS

    I lost my apps and music on my 3GS after updating to the new 5.0.1 OS.  I can see all my apps and music on my laptop iTunes, but can't get the phone to sync.  Any ideas??

    What happens when you try to sync?

Maybe you are looking for

  • Use of  "findByMultipleParameters" for   "OR " between two Query Filters

    Hi, I am also working in CE7.1 .I have  a query regarding the use of  "findByMultipleParameters" . That is how to use "OR " between two Query Filter condition,because if we add multiple queries into Query Filter List it will by default taking "AND "

  • How to write DML operation in a function

    Hi Its very urgent for me. I am writing DML operation directly in a function and is being called from select statement, it is getting error as "DML Operations cannot be performed inside a query". How to write a DML operation inside a function. My obj

  • Reg expression

    can somebody tell me how to write a query using regular expression instr function to find any alpha character in a string except + - . i have a varchar field that can contain any of the following values 234, 345.32, -66.33, +32. if the value enter is

  • BEX Error Crash

    Hi, over the last few days (since Fri 6th Dec) I have been experiencing a BEX crash while gaming. The problem suddenly arose and persisted a few days ago with no obvious cause. Here is the crash report:   Problem Event Name: BEX   Application Name: S

  • Please include Revel in the Creative Cloud Membership

    Adobe, Your goal is to get us all on Cloud Memberships, It's a win win for you on the revenue side.  And for us on the end user side, we will always have the latest and greatest Adobe genius ideas and offerings at our finger tips. Since you are alrea