N8 camera produces dull images and quality good

Hi al..
I am a die hard fan of nokia .Very exited to but nokia n8.
I went Happily to take live demo of n8 and book it.But i was shocked a lot...
When i tested the camera.. the brightness of the image it produces is very less such that when shooted at a distant even the person's face is unrecognizable.
I took several shoots, changed all settings,even went to another show room.the same.Even the pic quality is not good when zoomed in starts pix-elating,some noise in image quality.
I know N8 has best camera and spec ,But i cant believe the quality it produces in real.
What is this.Is that it the quality or both the n8 i examined are fault pieces (no way both are fresh pieces)?
Or the pieces that my state/Country is getting is not such quality manufacturing.?
Because none of the review or post have said like the camera quality exp is bad.I my self could nt believe the quality.
[next time i will try to include the samples.]
Kindly provide your valuable comments and solutions
Solved!
Go to Solution.

Hey all .....
I am very happy
With out loosing hope i weny again to another nokia priority showroom.
This time waka.. i made no misteke in testing the camera. the images where so good. i even took a pi in 0% light. it rocks. gona buy with in 15 days.....
Thnks all for your supports.
Buy the way i heard that their are grey market's n8 scattered, so pls go for nokia priority shop.
I have attached n8 samples here with.
Attachments:
13102010253.jpg ‏1418 KB
13102010259.jpg ‏1537 KB
13102010251.jpg ‏1640 KB

Similar Messages

How can i use PCIe 1433 and basler line camera to construct image and pocess it?

hello! every one ,I am new to machine vision.i have two problems to ask.First,how can i use line camera and 1433 to acquire 2-D image?second,if i want to pocess the 1-D signal ,how can i do it ?i expect for your answer ,thank you!

What you are trying to do is not something you can easily do in a forum, but I can give you the basics.
You have a CameraLink frame Grabber (PCIe 1433) and a LineScan Camera
The framegrabber needs to be configured to understand how to communicate with the camera. You need a file from the camera vendor. This file might already be installed. You can use MAX to check if it is, under Devices/IMAQ.
Assuming you can get to the point where you can communicate with the camera, you need to configure your acquisition.
Since the camera is a line scan camera, it captures image data one pixel ine at a time. You will need to configure the frame grabber to determine how many lines per image you want. The low limit is usually 1, and the high limit is either based on the framegrabber's internal memory, or that of the computer.
If you are using labview, you will need to open a sessing to the camera, acquire the image(s), and then close the session when you are done.
Once the image(s) are captured, you can performa analysis using the NI Vision Toolkit.
Sorry, but there is no way to condense years into one post.
Machine Vision, Robotics, Embedded Systems, Surveillance
www.movimed.com - Custom Imaging Solutions

Two camera distortion correction images and how to get rid of

I noticed when I was using the Correct Camera Distortion filter that two images were created after I finished. The edges of the bottom image were peeking out from under the top, duplicate image. Not a problem until I went to copy and paste from image to another and the pasted image although showing up on a layer didn't show up on the image it was to be on. I guess because it's "lost" under the bottom duplicate image. Why do I get two of the same images in this situation and how can I get rid of them so I can continue to copy and paste an image from one photo to another?

Went to Filter>Correct Camera Distorition. Made changes. Clicked OK, I think. It's kind of a hit and miss process and I tried several Horizontal Perspective and Vertical Perspective settings before getting it right and, who knows, maybe I didn't click Cancel sometimes.

N82 camera problem: black image and flashing blitz...

Hello, today my n82 phone crashed with this issue, i reinstalled the firmwire reseted it and the problem wasn't solved, u know if i can resolve the problem myself or i really must go to guaranty?

If you have dropped your N82 this issue is most likely hardware related necessitating a visit to a Nokia Care facility unfortunately.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Online banking site now shows login page as text-only; on different computer it still shows page with images and clickables -- is there a fix?

Previously when I logged in to my INGdirect online bank account, the login window came up showing images and clickable hotspots. Recently, the login window changed to a text-only version. On two different computers running Firefox, the login comes up in the previous version, with images and clickable hotspots. I'm unaware of having done anything to change my settings either in Firefox or on the banking website. Because it seems to be localized on this computer, I've tried downloading latest version of Firefox, but got no change, login still comes up in text-only format.

Try clearing your browser cache.
Tools > Clear Recent History... - hit Details and make sure only Cache is selected, then select Everything and hit the Clear Now button.

Dull Images on 600D and Speedlite Question

a) I got a used Canon 600D.
When I take pictures with it. The Images on the Camera Screen have High Contrast. When I downloaded and save the Images on my Computer. the Images are Low Contrast, Dull Images.. ... I have to adjust increase the Picture Style Contrast on the Camera to make a a Bit better.
why is this ?
I use a Transcend 4G Card which came with the Camera.
is this because its a Old or Used Camera or the Card is not so good ?
b) Is the Yongnuo YN 560 IV the Best Value Speedlite.
I am doing to buy one for my 600d
I am a Hobbyist

Brian205 wrote:
a) I got a used Canon 600D.
When I take pictures with it. The Images on the Camera Screen have High Contrast. When I downloaded and save the Images on my Computer. the Images are Low Contrast, Dull Images.. ... I have to adjust increase the Picture Style Contrast on the Camera to make a a Bit better.
why is this ?
We sometimes see this complaint if the user has his camera (or photo editor) set to the wrong color space, i.e. Adobe RGB rather than the more "normal" sRGB. Adobe RGB actually has a broader gamut and can register fine color distinctions that sRGB cannot. But the printer or display device has to be specifically set up for it; otherwise the images look dull. It sounds as though you're not using a photo editor, and I don't know whether the 600D is even capable of using Adobe RGB. But it's worth looking into; maybe the previous owner left the camera with a setting you don't want.
Bob
Boston, Massachusetts USA

After import, image from camera replaced with old (and incorrect) image

i imported photos this morning. maybe 200. into Lightroom 5.6 (with
camera raw 8.6, running on macosx 10.9.5; see below for "system info"). the images came from my
Leica M Typ 240, and were in raw format. after importing the images, i
went through them in my first editing pass.
going through, image 1867 ("L1001867.DNG") in LR was *not* the same as
image 1867 on my camera, but was, rather, an image (no longer on the
card in my camera) from 8 months ago in China.
the image on the camera was from 07.10.2014 15:49.15 (following one
taken at 15:49:07, which *did* show up in LR). the *meta* data in LR
appears correct for the image from the camera (i.e, shows a date of
07.10.2014, has likely exposure information, etc.), but the image itself
is the wrong image.
the image in LR *may* have been one i deleted (in LR), though i don't
know that for sure. if i *did* delete it, i deleted it months ago.
the LR image was shot on 22.02.2014 at 02:51-02:52 (i typically don't
change the clock). while i don't know for sure the image number of the
image in LR, it *appears* to be image 1419.
obviously, this is fairly worrying (as i count of LR to keep my
inventory!). what can i do to help you troubleshoot this? what can you
tell me about what is happening?
here is what "help:system info" says:
Lightroom version: 5.6 [974614]
License type: Perpetual
Operating system: Mac OS 10
Version: 10.9 [5]
Application architecture: x64
Logical processor count: 4
Processor speed: 2.9 GHz
Built-in memory: 8192.0 MB
Real memory available to Lightroom: 8192.0 MB
Real memory used by Lightroom: 1673.7 MB (20.4%)
Virtual memory used by Lightroom: 3555.8 MB
Memory cache size: 1608.3 MB
Maximum thread count used by Camera Raw: 2
Displays: 1) 2560x1600
Application folder: /Applications
Library Path: /Users/minshall/Pictures/Lightroom/Lightroom 5 Catalog.lrcat
Settings Folder: /Users/minshall/Library/Application Support/Adobe/Lightroom
Installed Plugins:
1) Behance
2) Canon Tether Plugin
3) Facebook
4) Flickr
5) Leica Tether Plugin
6) Nikon Tether Plugin
7) Photoshelter Archive Publisher
Config.lua flags: None
AudioDeviceIOBlockSize: 512
AudioDeviceName: Built-in Output
AudioDeviceNumberOfChannels: 2
AudioDeviceSampleRate: 44100
Build: Uninitialized
CoreImage: true
GL_ACCUM_ALPHA_BITS: 0
GL_ACCUM_BLUE_BITS: 0
GL_ACCUM_GREEN_BITS: 0
GL_ACCUM_RED_BITS: 0
GL_ALPHA_BITS: 8
GL_BLUE_BITS: 8
GL_DEPTH_BITS: 24
GL_GREEN_BITS: 8
GL_MAX_3D_TEXTURE_SIZE: 2048
GL_MAX_TEXTURE_SIZE: 16384
GL_MAX_TEXTURE_UNITS: 8
GL_MAX_VIEWPORT_DIMS: 16384,16384
GL_RED_BITS: 8
GL_RENDERER: Intel HD Graphics 4000 OpenGL Engine
GL_SHADING_LANGUAGE_VERSION: 1.20
GL_STENCIL_BITS: 8
GL_VENDOR: Intel Inc.
GL_VERSION: 2.1 INTEL-8.28.32
GL_EXTENSIONS: GL_ARB_color_buffer_float GL_ARB_depth_buffer_float
GL_ARB_depth_clamp GL_ARB_depth_texture GL_ARB_draw_buffers
GL_ARB_draw_elements_base_vertex GL_ARB_draw_instanced
GL_ARB_fragment_program GL_ARB_fragment_program_shadow
GL_ARB_fragment_shader GL_ARB_framebuffer_object GL_ARB_framebuffer_sRGB
GL_ARB_half_float_pixel GL_ARB_half_float_vertex GL_ARB_instanced_arrays
GL_ARB_multisample GL_ARB_multitexture GL_ARB_occlusion_query
GL_ARB_pixel_buffer_object GL_ARB_point_parameters GL_ARB_point_sprite
GL_ARB_provoking_vertex GL_ARB_seamless_cube_map GL_ARB_shader_objects
GL_ARB_shader_texture_lod GL_ARB_shading_language_100 GL_ARB_shadow
GL_ARB_sync GL_ARB_texture_border_clamp GL_ARB_texture_compression
GL_ARB_texture_compression_rgtc GL_ARB_texture_cube_map
GL_ARB_texture_env_add GL_ARB_texture_env_combine
GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_float
GL_ARB_texture_mirrored_repeat GL_ARB_texture_non_power_of_two
GL_ARB_texture_rectangle GL_ARB_texture_rg GL_ARB_transpose_matrix
GL_ARB_vertex_array_bgra GL_ARB_vertex_blend GL_ARB_vertex_buffer_object
GL_ARB_vertex_program GL_ARB_vertex_shader GL_ARB_window_pos GL_EXT_abgr
GL_EXT_bgra GL_EXT_blend_color GL_EXT_blend_equation_separate
GL_EXT_blend_func_separate GL_EXT_blend_minmax GL_EXT_blend_subtract
GL_EXT_clip_volume_hint GL_EXT_debug_label GL_EXT_debug_marker
GL_EXT_draw_buffers2 GL_EXT_draw_range_elements GL_EXT_fog_coord
GL_EXT_framebuffer_blit GL_EXT_framebuffer_multisample
GL_EXT_framebuffer_object GL_EXT_framebuffer_sRGB
GL_EXT_geometry_shader4 GL_EXT_gpu_program_parameters GL_EXT_gpu_shader4
GL_EXT_multi_draw_arrays GL_EXT_packed_depth_stencil GL_EXT_packed_float
GL_EXT_provoking_vertex GL_EXT_rescale_normal GL_EXT_secondary_color
GL_EXT_separate_specular_color GL_EXT_shadow_funcs
GL_EXT_stencil_two_side GL_EXT_stencil_wrap GL_EXT_texture_array
GL_EXT_texture_compression_dxt1 GL_EXT_texture_compression_s3tc
GL_EXT_texture_env_add GL_EXT_texture_filter_anisotropic
GL_EXT_texture_integer GL_EXT_texture_lod_bias GL_EXT_texture_rectangle
GL_EXT_texture_shared_exponent GL_EXT_texture_sRGB
GL_EXT_texture_sRGB_decode GL_EXT_timer_query GL_EXT_transform_feedback
GL_EXT_vertex_array_bgra GL_APPLE_aux_depth_stencil
GL_APPLE_client_storage GL_APPLE_element_array GL_APPLE_fence
GL_APPLE_float_pixels GL_APPLE_flush_buffer_range GL_APPLE_flush_render
GL_APPLE_object_purgeable GL_APPLE_packed_pixels GL_APPLE_pixel_buffer
GL_APPLE_rgb_422 GL_APPLE_row_bytes GL_APPLE_specular_vector
GL_APPLE_texture_range GL_APPLE_transform_hint
GL_APPLE_vertex_array_object GL_APPLE_vertex_array_range
GL_APPLE_vertex_point_size GL_APPLE_vertex_program_evaluators
GL_APPLE_ycbcr_422 GL_ATI_separate_stencil GL_ATI_texture_env_combine3
GL_ATI_texture_float GL_ATI_texture_mirror_once GL_IBM_rasterpos_clip
GL_NV_blend_square GL_NV_conditional_render GL_NV_depth_clamp
GL_NV_fog_distance GL_NV_light_max_exponent GL_NV_texgen_reflection
GL_NV_texture_barrier GL_SGIS_generate_mipmap GL_SGIS_texture_edge_clamp
GL_SGIS_texture_lod

it appears the actual image is probably in place, but the *preview* is incorrect. clicking on the image to zoom in causes (the normal) "Loading...", followed by a zoomed in view of the *correct* image. zooming back out gives the normal view of the correct image. (*very* good to know!)

HOW DO I RENDER A STILL IMAGE AND KEEP QUALITY

I'm still in search of help with why High Res. still pictures lose quality when I render. The images are at 300dpi, roughly 1900x1200 (they vary in size). I input them fine. Then, when I go to put them on the timeline - I get a pop-up window asking me to "AutoFix" this clip? When I say "yes" it drops down the quality and it becomes grainy. If I say "no" the clip remains looking the same - great.
But - then when I go to "render" that clip, in the timeline - it drops down in quality and becomes grainy - AFTER I render it.
HOW DO I USE STILL IMAGES - AND KEEP THEM HIGH QUALITY WHEN I RENDER?
My Project Settings are; 1920/1080 --- 30fps DROP frame (should it be Non-Drop?) -- Capture is HDV and Video Rendering is only marked at "Optimize Stills"
I'm using Adobe Premiere Elements 11 on a Windows 8 PC
Any help would be greatly appreciated
thanks

joeyMPI
OK. Let us give this a try. If I go off course anywhere along the line, please let me know.
1. Open Premiere Elements 11 on Windows 8 64 bit to the Expert workspace.
A. Under Edit Menu/Preferences/General
Remove the check mark next to "Show all do not show again messages."
Set the "Timeline render quality (valid for HD projects)" = "High quality, Slow speed"
Leave a check mark next to Default Scale to Frame Size.
B. Right Click the Edit area monitor, select Magnification and make sure it is = "Fit".
C. Right Click the Edit area monitor, select Playback Quality and make sure it is = "Highest".
D. Setting the Project Preset Manually to Get the Sharpest End Product Photo Display
Go to File Menu/New/Project and Change Settings
In Change Settings, change the project preset to
NTSC
DSLR
1080p
DSLR [email protected]
Close out of there.
In the new project dialog that appears, make sure that you have a check mark next to
"Force Select Project Setting on this Project". Close out of there.
E. The project preset that has been selected has a 16:9 aspect ratio, and it will direct the program to set
up a 16:9 space in the Edit area monitor for editing. So, best results are expected with photos with a 16:9 aspect ratio.
If an imported photo does not fill the Edit area monitor space, you can try to scale it (zoom in) just to the point of
getting rid of any black borders. A quick scale can be done by clicking on the monitor screen, and dragging on a handle
of the photo's bounding box which has appeared.
But, now for the moment of truth..
a. You should not have seen any helpful Fix messages.
b. If you render the Timeline content by clicking on the render button above the Timeline
what you see should look the same or better before and after the render.
Also keep in mind, that having to scale up too much can create pixelation.
300ppi or dpi has no significance in video. Pixel dimensions are the focus. And here, video is 4:3 or 16:9 aspect ratio. In
this specific case 16:9. It would be a good idea to plan ahead on the sizing of the photos beforehand. As far as I know the perk of enhanced
sharpness in the end product is associated with just the one project preset that I pointed to in the workflow.
But, right now, our target is on the maintaining the quality of the photos in the Edit area. And, I realize that you realize
that no matter how great the resolution of the imports, the imports will be reduced to the sizing characteristic of the export
preset.
We will be watching for your results. Thank you for considering the suggestions.
ATR

Understanding Image Sizes and Quality

I'm new to the printing and dimension specifications in Lightroom. If I use 250ppi and 2000x2500 but then change that to be able to print a larger image (300ppi 3000x4200 - 10x14x print, for example), what exactly happens to the image when I increases pixels and ppi? Does it improve/degrade the quality?

Great advice from dj, a few further points from my own experience:
In the Print module, changing the Print Resolution setting simply informs LR to resample the image before it is sent to the printer driver (if the default is different to the current configuration). This has no effect whatsoever on your image.
In the Library module, Exporting the image is per advice from dj
In the Develop module, cropping the image results in less pixels (when exported)
Elsewhere in LR, I am not aware of any method of resampling an image to increase pixels (interpolation). I have seen this in Photoshop (Image > Resize) but not LR.
I think the confusion comes from pixels and ppi. Pixels represents the actual ‘stuff’ in the image, this is not normally modified in LR per advice above. Ppi simply refers to how these pixels are distributed when viewed/printed. If you make the assumption that 72ppi is good enough for screen viewing then a 3000x3000 pixel image would be good for 3000/72 = 41 inches on screen. Assuming 240ppi is good for printing then the same image would be good for 3000/240 = 12.5 inches.
So ppi ends up being an indicator of view/print quality and nothing whatsoever to do with image quality.
To answer your questions specifically:
What exactly happens to the image when I increases pixels and ppi?
Increasing pixels resamples the image by interpolating adjacent pixels. Not something LR can do as far as I am aware. No additional ‘stuff’ is introduced, therefore no additional image quality.
Increasing ppi would distribute more ‘stuff’ in a viewed/printed image, thereby increasing the perception of quality.
Does it improve/degrade the quality?
Neither increasing pixels (in, say, Photoshop) nor PPI will increase the image quality. PPI would effect the perception of view/print quality per above.
NB I should also point out that your monitor resolution would also impact the screen view perception of quality.

I have a MacBook Pro running 10.7.2. I am trying to import photos from my older Canon EOS-1D for the first time since my OS upgrade. iPhoto does not see the camera nor does Image Capture. IC says there is not a camera connected. Cable is known good.

I have a MacBook Pro running 10.7.2. I am trying to import photos from my older Canon EOS-1D for the first time since my OS upgrade. iPhoto does not see the camera nor does Image Capture. IC says there is not a camera connected. Cable is known good. Has something changed? Thanks!

If neither iPhoto not IC can seethe card it might suggest an issue with the card or the ports on the camera/mac.
Try reformat the card, change the ports and/or use a USB Card Reader.

HT4007 Does Aperture support Images and videos from the new 3D cameras?

Does Aperture support Images and videos from the new 3D cameras?

If the camera is listed here OS X Lion: Supported digital camera RAW formats or here Mac OS X v10.6: Supported digital camera RAW formats then the raw image file is supported by Aperture.
If the camera is not listed then as Keith wrote if it produces JPG's they can be imported into Aperture.
If you told us what camera you were interested in it might help.
regards

I'm using iphone 5 but its camera is not properly working. all the images i'm clicking are of dimension 600X800 and the size of the image is just 60-70 kb. now please tell me how to increase the dimension of images and its size.

i'm using iphone 5 but its camera is not properly working. all the images i'm clicking are of dimension 600X800 and the size of the image is just 60-70 kb. now please tell me how to increase the dimension of images and its size.

''rojere [[#question-1055991|said]]''
<blockquote>
i try to keep my thumb palms off the mouse pad when i am typing but every now and then my screen resizes larger or smaller until i take my left palm off the keyboard base its only when my left palm is resting on the base next to the touch pad. i type pretty fast so it gets annoying and yes it also jumps screens or reverts back to previous message and i have to choose ctrl z to undo and get back to my message i was typing... it also switches tabs on me as well... not sure why my palm being on the left of the keypad on the base should effect anything but it does after a while. and i have to stop what i am doing...and go to the firefox menu and change the screen size back down to 100% sometimes it goes up to 200-300 other times it goes down to 70-80% i find it annoying i i wish there was a way to turn off the screen resize in the setup panel. if its just left to be 100% i am happy with that... i don't need it to be bigger or smaller... there should be a way to LOCK it down... i understand that there are people out there with eye problems and needs to have the screen size increase using the + or - but there should be a lock so it just stays no matter what is happening on my keypad or touch pad or base of the pad... that screen size will not increase or decrease. unless i turn off the lock... perhaps this is something they can implement in the next version or do a quick update of the browser
</blockquote>
sorry that is all greek to me thanks for attempting to explain what you were trying to explain sorry i just not tech person to be able to understand or where to begin ... have good day and thanks for again trying

Is the Camera on the New iPod Touch good quality?

For Christmas I hope to get the new iPod Touch and use it as a camera for Youtube videos and I'm wondering, is the camera good quality? I f someone with the iPod could please tell me? Thanks!
~ Rossi

RossiBoi wrote:
For Christmas I hope to get the new iPod Touch and use it as a camera for Youtube videos and I'm wondering, is the camera good quality? I f someone with the iPod could please tell me? Thanks!
~ Rossi
For recording video , the 720P HD video camera at the back is amazing quality when their is enough lighting. You would be pretty amazing what a little device such as the iPod Touch can do.
Regards
Andy

When opening an image Photoshop Elements 12 is opening it in Camera Raw, it is not a RAW image and it is cropped How do I uncrop the opened image?

When I am opening a .jpg image not an actual raw camera image from Elements 12 it is being opened as a camera Raw image and the image is cropped, I can't find anyway to get the image to uncrop or zoom out so that the entire image is visible so that I can actually edit it to something that is useable. The images were taken with an iPad and copied I suspect using the organizer from Elements 11 but I can't be sure. If I could just uncrop the opened image so that the entire image is visible this would not be a big deal.
Is there a way to uncrop the image that is being opened by Camera Raw? Am I going to have to get my hands on the source of the images (the iPad) and copy the images again using explorer and not let them be copied with the organizer?

Uncheck the boxes at the bottom of the dialog Scale styles and resample Image so that only constrain proportions is checked. If you the change the resolution box from 240 to 300 you will get back to your original dimensions.
This is a meaningless thing to do, you still have the exact same number of pixels, you have only changed the metadata number in the file for ppi, and your prints are not affected by this number.
You could also use the same method to change the dimensions to 6 x 4 or 9 x 6 etc.
There are some cases (actually most cases) where you need to CROP the photo to change the dimensions, when the aspect ratio of the original photos is different than the aspect ratio of the final photo; the specific case in 99jon's example is the only case you ever want to change dimensions using Image->Resize->Image Size, where the aspect ratio doesn't change from 6x4 to 9x6 (or 12x8 or 18x12 or ...), and even then, you could do the same thing simply by telling the printer the size you want, you don't really need to do anything in PSE.

I am unable to email an image from camera roll. the image gets "stuck". cannot input email address or subject line. am unable to cancel and go back to camera roll

i am unable to email images from my camera roll. the image gets "stuck". cannot insert email address or subject line. cannot cancel... return to camera roll.
what to do. i tries taking new picture and sending it in an email... same thing... gets "stuck "
Waht to do ?

Hello lohmann8,
Thank you for providing so much detail about the issue you are experiencing with emailing photos from the Camera Roll.
The first thing I recommend is quitting and relaunching the applications on your iPhone:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
You can find the full article here:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
If you are still seeing the same issue after quitting and relaunching the Photos and Camera app, I recommend restarting your phone and then resetting if it's still not working:
Restarting your device
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
Press and hold the Sleep/Wake button until the Apple logo appears.
Note: Reset your device only if you are unable to restart it.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
You can find the full article here:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists, the last thing I recommend is backing up and restoring your iPhone:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
Thank you for using Apple Support Communities.
Best,
Sheila M.

N8 camera produces dull images and quality good

Similar Messages

Maybe you are looking for