N8 Connection failed / Connection unavailable for ...
My N8 C: was always running out of memory so I thought of doing a Hard Reset.
I backed up data, Hard Reset(wipes off all memory), Restored.
Now I am able to find my WiFi hotspot but not able to connect, it says Connection failed / Connection unavailable.
WiFi hotspot is created using Nokia E72 JoikuSpot which worked smoothly prior to Hard Reset but not now. My other devices are still able to connect to the hotspot so everything is fine at Joiku in E72.
I have tried Soft Reset, Hard Reset of my N8 and even deleting the HotSpot from saved connection & then re-saving it.
Pls advise.
Using Nokia Lumia 1320.
Also have Nokia E72 & Nokia N8.
Replying for an update because i had this problem, fixed, but have it again:
Well I did about a month ago i had the same problem with the mobile data saying connection failed. I did the soft restand then hard reset, but then still had the issue. I deleted all the access points and then took out the sim card. Put the sim card back in and then had to manually setup my access point.
That worked, not sure if it was one specific thing or the whole combination.
but now the same problem is back, the mobile data not working and saying connection failed/connection unavailable. Cannot get it fixed no matter what i try so far (tried resets, manually inputting apn settings again, etc)
my wifi works by the way.
Did you find a fix or does anyone have any suggestions?
Similar Messages
-
Connection failed ... Connection unavailable
I bought nokia 701 two days back. My service provider is Reliance. Yesterday I
downloaded and installed Facebook and Opera from ovi suite. Also i inserted my
Vodafone sim card to copy contacts to phone. Afterwards I am not able to connect
GPRS. It says "Connection failed ... Connection unavailable".
My "mobile data" is set to ON mode.
I have contacted Reliance customer care, but they are not able to solve the issue.
Please help me out.
Solved!
Go to Solution.Same solution for me too - for E6 with Airtel.
I uninstalled Fsecure mobile security, reinstalled the phone software through Ovi Suite & now I am not getting the "connection failed, connection unavailabe" error. It's very strange, since Fsecure came pre-loaded on Nokia E6 and is also available in Nokia Store. -
808 - Connection failed Connection unavailable mes...
I just received my 808 replaced by Nokia for the 3G bug issue. Now I have been noticing that annoying Connection Failed connection unavailable message every few seconds. Turned the positioning methods OFF and the frequency of the error message goes away but it still pops up every few minutes. I did a hard reset, removed the memory card where most of my apps are installed and it still gives me that same error. Ordered a new SIM to see if that makes any difference - none - Still same error message. That message is so annoying. Anyone have any other ideas that I could try ? Privacy mode is OFF also.
geeknc wrote:
I just received my 808 replaced by Nokia for the 3G bug issue. Now I have been noticing that annoying Connection Failed connection unavailable message every few seconds. Turned the positioning methods OFF and the frequency of the error message goes away but it still pops up every few minutes. I did a hard reset, removed the memory card where most of my apps are installed and it still gives me that same error. Ordered a new SIM to see if that makes any difference - none - Still same error message. That message is so annoying. Anyone have any other ideas that I could try ? Privacy mode is OFF also.
Have you assigned a data connection preference for browser and other apps requiring data ? -
Connection failed.Connection unavailable on c7 Bel...
Finally Nokia has updated social network software on Nokia Belle. I thought it would solve the problem,but still when i open default applications such as Facebook,Twitter, Check in, Social networks in upper right corner it shows message "Connection failed. Connection unavailable".On any other application there is connection. I would like to suggest Nokia to transfer to some other software,because they dont know how develop own. This is the message from unsatisfied customer,because my Nokia is not working correctly for about 1year,from release of Nokia Anna. Or maybe you have solution for my problem after 6 months?
I'm having this problem too for a while now. I have done a few hard resets and I've managed to get the 1.3.236 version working and connecting just so I can upload photos on facebook. I can now see another update (1.5.216) available but I'm still afraid to update because it might not connect. Another app which I was using and is now facing the same issue is AccuWeather. I will have to upgrade my contract soon and the Samsung Galaxy S3 looks better than the Nokia 808 Pureview from where I'm standing. I'm looking forward to video calls with Skype and a proper facebook app
-
EP 6.0 SP2 PL28 - connection pool for principal type UACC fails
Hello,
does anybody have the same problem? - We always lose the LDAP-Connection after restart of the j2ee-Services on our Enterprise Portal. We get then this error-message:
->
<b>connection pool for principal type UACC fails</b>
Loading application: com.sap.portal.usermanagement
Loading services:
Loading service: com.sap.portal.license.runtime|license
Jul 2, 2005 4:27:09 AM # System_Thread_32 Fatal [class=com.sap.security.core.persistence.datasource.imp.LDAPConnectionManager][method=initConnectionPool()][cl=13324]connection pool for principal type UACC fails
Thanks in advance.
Regards,
RalfDoes anybody can help me? - It´s important.
Thanks in advance.
Regards,
Ralf -
I am trying to connect using facetime to my daughter who's ready and waiting! But the message saying she is unavailable for facetime keeps coming up.
http://support.apple.com/kb/TS5419 -UPDATE
Pay attention to step 1:
If you started to have issues making or receiving FaceTime calls after April 16, 2014, you or your friend may have an expired device certificate. Updating both devices will resolve this issue.
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/ts3367
If you encounter issues making or receiving FaceTime calls, follow these steps:
Update both devices (your device and your friend's device) to the latest version of iOS.
If you started to have issues making or receiving FaceTime calls after April 16, 2014, you or your friend may have an expired device certificate. Updating both devices will resolve this issue.
Verify that FaceTime is enabled in Settings > FaceTime.
If the issue persists or if you see the message "Waiting for Activation," turn FaceTime off and then on again. Learn what to do if you can't activate FaceTime.
If you don't see the FaceTime setting, make sure that Camera and FaceTime aren't disabled in Settings > General > Restrictions.
Verify that the date and time are set correctly: Tap Settings > General > Date & Time and turn on Set Automatically.
Verify that both parties have an active Internet connection and are connected to a Wi-Fi network or a cellular data connection.
Verify push functionality using Mail or other applications that use this feature. FaceTime uses push notifications to send and receive invitations.
Make sure that you have the correct phone number or email address.
Restart your device.
If using FaceTime over a Wi-Fi network, go to the steps to resolve Wi-Fi network issues. -
808 "connection unavailable", "connection failed" ...
Hello,
I've had issues (gallery and SMS, maybe will post to other threasds) with my 808/Belle FP2 and tried to backup/hard reset/restore data to fix them.
After hard reset (with data deletion) my 808 reported "connection unavailable" and "connection failed" when I attempted any data connection, both GPRS and wi-fi. The second hard reset has fixed this issue, however after restoring data this happened again. Soft reset did not help (maybe second one would).
...the 3G and wi-fi updates do not affect thisSeems that the issue lied in combination of Nokia Suite and Eset mobile security (beta).
The eset mobile security was not restored with other installed applications, but installing prior to restoring applications and settings did help.
I guess that firewall settings were restores, but not the application that manages the firewall (eset mobile security).
Unfortunately I was not able to install it before, installation apparently requires network connection. -
Connection test for connectors(SAP R3 system) fail
Hi,
I got an EP system and connected to one existing R/3 system.For the same i have defined it in system landscape of EP.System administration ---> system configuration ---> system landscape.In property editor i have deined all the min required properties.
Application Host 172.16.3.68
Gateway Host 172.16.3.68
Gateway Service sapgw00
Logical System Name ISCCLNT100
Remote Host Type 3
SAP Client 100
SAP System ID (SID) ISC
SAP System Number 00
Server Port 3200
System Type SAP_R3
Trace Mode 1
The system intially works fine.But when
1)There are more users it gives connection error.
2)If there are not much users then also After some time it automatically shows connection error.
Then when I do Connection Test for Connectors,it shows "X" failed.
What I usally try to do,I restart the SQL server.
But this method does not work.I have to restart the EP.Then again the system works fine.
I think there are something wrong input in the property value of SAP R3 object setting.
Hey folks can u please help me in sorting out this problem?Why such connection error happens again and again?Hi Rajeev,
Thanks for your answer.Actaully I have miss interpreted the problem.Sorry Problem is not with in the SAP R3.
Connection problem is like this::
I have defined a system EPSQL(system alias for MS SQL sever DB) for my EP instance
To connect to database.
The connection tests to the alias is ok.
But as more and more users try connecting to the db the connection test fails.
Restarting the SQL server doesnt help.
I have to restart the EP instance to get over the problem
I think there are something wrong input in the property value of object setting.or,EP maintains some timeout or max user info...
Do u have any solution? -
Connection Source for .... failed because the environment is not trusted
I got a message like this -
Connection Source for .... failed because the environment is not trusted
when trying to bind a field to a data connection field. What does this mean? I setup the data connection and it tested out fine.I am not exactly sure what you are referring to by the see "Note". I didn't find a "Note" that was related. The only thing I did find was the following:
"If you are using external data sources in a form design that you want users to fill in Adobe Reader, you must set usage rights for the form by using Reader Extensions Server."
I am only trying to display back information out of a database. I don't want to write information. Is there any way to get around this?
Matt -
Sandbox cause my app kept connecting unavailable network drive
Sandbox cause my app kept connecting unavailable network drive, can it be fixed?
I have to manually delete sandbox config every time to prevent app hang.Hi Jaggs,
nice question!
I think the problem is that is not only your LabView application which stops, but the Operating System which hangs, if Storage device access fails. I experienced this problem under many OSs, Win, Linux, Dos-like...even RTOSes (try to access a corrupted Flash card in PharLap ETS for FieldPoint!).
To check if drive is present, you can ping it... it's quite naive, but at least you avoid the "drive disconnected" problem... I think a ping shouldn't hang PC...
What Hardware are you controlling? You know, some NI boards (many...) have onboard memory, and can sample independently of PC control....for a while, of course!
I hope some guru will answer to your question (which I didn't answered, I know! ), because I'm interested too!
Have a nice day!
graziano -
What are the username, password and connect string for Designer 6.1.1?
So that we may better diagnose DOWNLOAD problems, please provide the following information.
- Server name
- Filename
Oracle designer6.1.1
- Date/Time
- Browser + Version
IE 6.0
- O/S + Version
Win 98
- Error Msg
ORA-12154:TNS:could not resolve service name.
RME-00220:Fail to connect to repository
These error messages were shown after I entered system, manager and internal, respectively.Hi YungJen Chen,
There is no general username, password and connect string for
Designer 6i Release 4.1.1.
First, you install the client tools using the Installer. See also the
Designer Installation Guide, Chapter 1, 'Client Side installation'.
Second, you install the repository into an existing database, using
the Designer Installation Guide, Chapter 2, 'Server-side installation,
migration and upgrade'.
The Installation Guide provides step by step instructions on what
users you need to create for various purposes. Any database users
you may need to use such as System or Sys will use the password
given when you installed the database, or whatever passowrd you
changed it to since.
The Installation Guide is available as part of the download, or from
your Windows Start Menu once the Designer client tools are installed
or from the Designer Documentation page here on OTN.
Hope this helps. Regards,
Dominic Battiston
Designer/JDeveloper Product Management -
Problem with CmdLineLauncher - Connection unavailable
I have problem with CmdLineLauncher. When i execute this tool by task scheduler during night, i get error message:
Launch Vars: {ExecDB=Planning...}
2011-12-18 03:31:22,674 WARN main com.hyperion.hbr.cmdlnlauncher.CmdLineLauncher - Connection unavailable Planning/...
I found explanation of this problem:
Business Rule Error
Hyperion planning services are stopped for backup procedure at night. Next step is ODI and data loading.
After data loading i need to recalculate dimensions. For now i'm using CmdLineLauncher to execute proper business rule.
If CmdLineLauncher not work, how can i recalculate dimension in other way by schedule?.
Any other solution?
PeteWell if it is working now then it is probably down to the fact that a successful login into planning has to happen first.
There are probably a number of different options to try, maybe use one of the other planning utilities first before the command line launcher, or a script that logs into planning.
You could also try transferring the script to a calc script and then use Maxl to run it.
Cheers
John
http://john-goodwin.blogspot.com/ -
Set up DB Connection Pool for Oracle DataBase Using Java App Server8
Hi,
In the Admin Console of Java App Server 8, I tried to create a connection pool for the oracle database. I chose Resource Type to be "javax.sql.ConnectionPoolDataSource" and the Vendor is Oracle. So the Data Source Class Name is filled by the system to be "oracle.jdbc.pool.OracleConnectionPoolDataSource". Now, I set up the class path to point to the database driver class "sun.jdbc.odbc.JdbcOdbcDriver" and also the to the Data Source Class Name. Also I set up the JVM options in the console. Restart the server, and then try to ping to the database, but get the error:
Operation 'pingConnectionPool' failed in 'resources' Config Mbean. Target exception message: Connection could not be allocated because: No suitable driver
I don't understand what else I should do and why this error is coming?
Please help me out.
Thank you
Regards,
SarahHi,
I've already solve the problem. I did the following:
set the Url to be: jdbc:oracle:thin:@hostname:port:SID
set username
set password
add oracle.jdbc.drivers.OracleDriver into the JVM options -Djdbc.drivers
restart the server
test the connection
it works :) -
Setting up connection pool for cloudscape 10 embedded database
I got problem with setting connection pool via admin console for cloudscape 10 embedded in j2ee 1.4 (Application server 8.1), what im doing is:
-in resources/jdbc/ConnectionPools i add a new pool
- datasource classname i set up as: "org.apache.derby.jdbc.EmbeddedXADataSource"
-resource type: "javax.sql.XADataSource"
-DatabaseName: "jdbc:derby:D:\\Programowanie\J2EE\domains\domain1\config\notesData"
-set no password and user, becouse i havet set this in database
and when i ping to that datebase i got error:"Operation 'pingConnectionPool' failed in 'resources' Config Mbean."
when i change Datasource Classname to: "org.apache.derby.jdbc.EmbeddedDataSource", this error occur:
Operation 'pingConnectionPool' failed in 'resources' Config Mbean. Target exception message: Connection object cannot be null
what im doing wrong? i look everywhere and i cant find solution to my problem...hope you can help me.
Thanks,
KrystianAmit wrote:
>
"whats are the settings (URL, driver, properties) required to set up a connection pool for DB2 on OS/390 ?I'm using "COM.ibm.db2.jdbc.app.DB2Driver" as DB2 driverHi. If you can successfully use that driver with one of it's simple
JDBC example programs, then show me that example, at least the
part that makes the connection, and I'll show you how to define a pool.
Joe
PS: Folks: BEA WebLogic is expanding rapidly, with both entry and advanced positions
for people who want to work with Java, XML, SOAP and E-Commerce infrastructure products.
We have jobs at Nashua NH, Liberty Corner NJ, San Francisco and San Jose CA.
Send resumes to [email protected] -
Problem creating a connection pool for mssql server
Hi
i downloaded the microsoft type 4 driver for JDBC and i have installed it. now i am trying to create a connection pool for MS Sql server but each time i ping i keep getting an error telling me
Operation 'pingConnectionPool' failed in 'resources' Config Mbean. Target exception message: Connection could not be allocated because: [Microsoft][SQLServer 2000 Driver for JDBC]Error establishing socket
please can someone help out on this
IfeanyichukwuI assume that you installed the driver correctly. You did go into the app sever admin and set the JVM path? You do this by going to Application Server | JVM Settings | Path Settings and putting in an entry for Classpath Prefix.
If that is done and it's not something basic like your database isn't turned on, then it must be your settings. To to Sun's site and search for dbping. http://developers.sun.com/prodtech/appserver/utilities/dbping/dbping_overview.html
Deploy this program and run it. It is a very simple tool that lets you test different property settings. Play around with different settings until you get a ping.
If that doesn't work post your connect pool settings.
Good luck
Mike
Maybe you are looking for
-
We want to use LabVIEW 2010 to send/receive floating points from LabVIEW 2010 to/from a network (192.168.101.xxx) that utilizes GE ethernet global data protocol (EGD). The network has several HMI's running Cimplicity Plant Edition 4.01. We can config
-
Help needed in "V45A0003" User Exit
Hello All, I have one problem doing Userexit "V45A0003" for VA01. I want to disable one field in VA01 Screen no. "4900" when order type is "RE". I try mentioned Exit for the same and i am able to disable that field for all order type but i am unable
-
Will Apple tv connect to Lovefilm
Does Apple tv connect to Lovefilm?
-
Early 2008 MacPro/UPS shutting down too quickly?
apologies in advance, as I'd bet this has been covered before - just couldn't find it with Search? the problem is - in broad, general terms - I have an early 2008 8-core hooked up to an APC UPS XS 900 battery backup. The Mac Pro's a couple of years o
-
Hi all, For third party scenario ( item category TAS), at the time of Goods reciept is it normal to create sales order stock? One of our clients using TAS to create sales order but when we go to mmbe, can see stock allocated to the sales order. Is i