N8: Data connection is always on

since the last FW update the data connection is always on is connects automatically after manually disconnection it. It is creating around 200 to 300MB of traffic per day.
Checking in the connection manager it is the App Messaging.
Checking with the App "DataWatch" the application neasserver creates the traffic.
It could be somehow linked with the Exchange Mail client?
Can anybody send me a hint how to switch back to a normal check every 15min as it is configured.
Thx

Hello chrisscn43, try this go to settings>connectivity>settings>data use in home country(set this to always ask). Again in the same thing go to destinations and then options>default connection(just create a new access point and set this as default in this way the connection won't take place.). Again check this too in the home screen tap options>widgets to online/offline mode. Check whether its shown as widgets to offline mode. If so then it means that your home screen widgets are in online mode and data transfer is taking place. Touch that so that the option changes to widgets to online mode. Try and reply.
Nokia C7

Similar Messages

N97 mini data connection is always on?

Why is the data connection always on,on my n97 mini phone this kills my battery life? I've been playing with it for 2 days now trying to figure out what's making it stay on all the time but I can't find the source can you please help? THANKS

hi this will help
Internet communication settingsSelect Menu > Settings and Connectivity > Admin.settings > Net settingspacket data select when needed
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

E52 fw 031.012 3g data "connecting" icon always on...

Since the last update of my E52's firmware, the 3G connecting (not "connected") icon - which is the one with the dotted 2-way arrow under the signal meter - is always shown on the screen. I have no applications running in the background (as the task manager says). I have disabled all the internet synchronisations and the icon is still there, from the moment I power-up my phone.
This doesn't cause me any problem (apparently), but I was wondering if that is normal. Other than this, all applications that use this kind of connection work fine. They connect through 3g (the icon goes to full 2-way arrow), they do their job and then they disconnect and the connection icon goes back to the "connecting" state.
I have also tried to force the phone to close all active data connections, by keeping the hang-up button pressed for a few seconds, but nothing happens.
Any idea?
Solved!
Go to Solution.

Hi, try this
control panel>>settings>>connection>>packet data >>
change the packetdata connection to when need, it could be on the when available setting.
If you like my post kindly hit the Green Star Button on the left.
Nokia Phones owned: 3310, 8310, 7650, 3650,7210,6230, 6630, 6600,6100,6610, 6610i, 3230, 8800, 5700XM, E52 (only Nokia phones)

N9 "Drive" always asks for a data connection

Dear all,
New to my N9, I do love it! But is this normal the "Drive" applications doesn't work without a data connection?
Pretty annoying, even if the full map is loaded in the flash, Drive doesn't event start without data link.
Thanks for the help.
Solved!
Go to Solution.

@romut
Sorry for any misunderstanding here, if you go to "Settings" > Device > GPS & positioning - do you have the same settings as screenshot?
I get the grey shaded circle on starting "Drive" which disappears once location established.
Happy to have helped forum with a Support Ratio = 42.5

Excel Table with SharePoint Data Connection - Manual Text Entry Misaligned After Refresh

Greetings!
I have an Excel 2010 workbook that includes a table linked to my SharePoint 2013 site by a data connection. The SharePoint list feeds the table standard information that's managed on the SharePoint site, but I need the user of the Excel workbook to be able
to enter text manually in the workbook to associate local information with the line-items coming from the SharePoint list. To do this, I've added extra columns to the end of the table.
The user can enter information in the appropriate cells in the "extra" columns at the end of the table, but when I refresh the data connection, the addition of a new list item on the SharePoint side results in the user's manually entered text getting
out of alignment with the row it's supposed to be associated with.
Example
Column 1(SP)
Column 2(Extra)
Row 1
Item 1
Row 2
Item 2
Text entered for Item 2
Row 3
Item 3
Then, if I add a new item to the list in SharePoint, for example, something that would appear between the original items 1 & 2, after refreshing the table, I get the following:
Column 1(SP)
Column 2(Extra)
Row 1
Item 1
Row 2
New Item 1.5
Text entered for Item 2
Row 3
Item 2
Row 4
Item 3
The table's data connection is set to insert rows for new items, and I could swear I had this working properly once upon a time...but I can't seem to make it work now.
Any thoughts on what would cause this?
Thanks in advance!

Hi Eric,
>>but it seems that by extending the table itself to encompass both the SharePoint-sourced columns and the additional columns, that an association would be created between all columns for a given row in the table, no?<<
From my understanding, the answer is no.
Another example:
I have an additional column named "Column2" and an external column named "ID" (see "before").
After I add a new record and refresh this table, Excel will keep the last row in "column2" and add an empty cell in the second last row. (See "After")
If I delete the eighth data and refresh this table, Excel will still keep the last row and remove the last second cell.
In your case, if you insert a new record in the middle of the data and refresh this table, Excel will synchronized the external data and add a new cell in the additional column in the second last row.
From my understanding, Excel will always change the second last row to suit for deleting or adding record.
Hope this helps.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to move data connections with SOAP web service in different environments in InfoPath Forms 2010

Hello,
I've an InfoPath Form where I've around 10 SOAP web service data connections. They are calling a custom web service for a custom business process. The web service URL has a query string parameter which identifies whether it's a Test web service or the Production
one. The web service URL looks like this:
http://server/webservice/wsdl?targetURI=testSPRead (for the Test environment)
http://server/webservice/wsdl?targetURI=ProdSPRead (for the Production environment)
When I develop the form in Dev environment, I use the Test web service URL and save the data connection as UDCX files in the data connection library. After completing the development, when I deploy this Form in Production, I update the URL in the UDCX
file in the Production data connection library, but when I run the Form in Production, it throws error 'Error occurred in calling the web service'. After doing more research, when I extracted the XSN file and opened Manifest.xsf file in Notepad, I found the
references of 'testSPRead' parameter.
So, in the UDCX file the web service URL is '/targetURI=ProdSPRead' but in the Manifest.xsf file, there is a reference of Test web service parameter which is 'testSPRead' and that's why it's throwing error.
For testing purpose, I updated the Manifest.xsf file and replaced all the occurrences of 'testSPRead' to 'ProdSPRead' and also updated all the relevant files of the data connections (like XML, XSF etc.) and saved the Manifest.xsf as Form.xsn and deployed
in Prod and it worked.
The question is - is this the right way of doing it? There should be a simple method in such cases where web service has conditional parameter to identify the Test and Production web service.
Does somebody know what is the right way of doing it? I also thought of adding 'double' data connections - one set of Test and another set of Production and call them by identifying the current SharePointServerRootURL, but that's a lot of work. I've 10 web
service data connections in my Form and in that case I'll be having 20 data connections and setting their parameters in different Rules is too much work.
Please advise. It's very important for me!
Thanks in advance.
Ashish

Thanks for your response Hemendra!
I hope Microsoft improves this thing in subsequent patches of InfoPath 2010 or InfoPath 2013 because I don't think this is a very special requirement. This is failing the purpose of having UDCX files for data connections. Why the WSDL's parameter value
is being written in the Manifest.xsf and other XSF and XML files. InfoPath should always refer the URL and parameters from the UDCX files.
--Ashish

Slow/non-existent data connection on 3GS/iOS 4.0.1

I have been a happy 3GS user since last December. About three days ago, I synced to iTunes and installed the latest software update, to iOS v4.0.2. Since then, whenever I try to access any web page in Safari, it just sits there for a while trying to access the page before eventually coming up with a message that it was unable to access the web page "because the server stopped responding". The same happens if I try to use the data connection via another app (e.g. Facebook). I should add that everything works fine if I connect via WiFi.
I did manage to get on the web yesterday evening when I was in a city centre area with five bars of 3G signal strength, but even then it took ages to load a web page. I have always had between about two and four bars of signal strength at home, and this has always been sufficient to load web pages reasonably quickly.
I usually use the 3G data connection several times a day, and have never experienced this problem until now. I've just got off the phone with O2 technical support – they asked me first to reset network settings and then reset all settings, but neither of these made any difference. They left me with two suggestions: go to an o2 store and ask them to try my SIM card in a different handset (I don't have much faith in this working), or do a factory reset/restore via iTunes. I'm loathe to do this unless absolutely necessary, as I guess it means losing all my data and having to resync everything from scratch.
Is anyone else experiencing this problem? Any suggestions other than what the o2 guy said? Is there any way I can get back to 4.0.1, which worked fine?
Thanks in advance,
Rob

Wow, our responses are starting to get long.
robgrayson wrote:
actionmarker wrote:
It's a pity he didn't (or wouldn't) change the SIM. It probably took him longer to explain to you that he didn't need to test the SIM that it would have take to set up a new SIM and test it.
So unfortunately, you still don't know for certain that it's not a SIM issue.
I agree it's a pity. I really wanted to be eliminate this as a possible cause, but I couldn't make the guy do it.
Maybe try another store, or do it over the phone and get them to send you one out?
I did a full restore – and incidentally discovered that the backup I made before applying the 4.0.2 OS update was not available to restore – I'm guessing it may have been corrupted or something. So I've had to revert to a backup that was saved in June, which is a bit of a pain. Anyway, the restore has changed nothing in terms of connectivity – with 3 bars of 3G signal, no web page will load – I just get the spinner in the status bar at the top of the screen, and eventually a message saying that the server has stopped responding.
Did you restore to 'new' or tried to the backup? You need to try it to 'new' as this erases all previous settings.
I restored it to the backup. I guess I need to restore it to new – which is a pain because it means I then have to manually reset any settings for mail accounts, etc.
You need the restore to 'new' so you have a clean phone, test in internet connection with nothing added and see what happens.
Personally I don't particularly like the way iTunes backs up. It's probably fine when this are all good, but when testing or trying to fix issues, I find it a bit limited.
All the Backups on your Mac go to this location;
/Users/[username]/Library/Application Support/MobileSync/Backup/
The issue I have with it is that in the backup folder, some of the files are overwritten each time that a backup occurs, making only the last backup available for restoring.
Yes, I find that pretty annoying to. I've just lost two months' worth of text message history because of it.
My work around for this is to copy the complete backup folder then in the copied folder I open the Info.plist file with TextEdit and edit the Device Name string by adding the date. When you then open iTunes and try to restore from backup, multiple backups are displayed.
You said you copy the entire folder before editing the Info.plist file. I presume you put the copied folder in the same location as the original?
In the backup folder, there is a folder with a big long alphanumeric name. Make a duplicate of this and leave it in the backup folder, so there is the original folder and copy of original folder. then edit the info file in the duplicate.
Once done, open itunes without the phone connected and go to iTunes > Preferences > devices and you should see your extra backup appear in the list there.
When you edit the info file change the following line:
+<key>Display Name</key>+
+ <string>[robgrayson]’s iPhone 20100511</string>+
I add a date at the end of the line. This line is then displayed in iTunes as the name of the backup
I also set iTunes to not automatically sync when the iphone is connected. This give the control back to me of when and how often I backup.
Yes, I changed this setting yesterday too.
Do you use Time Machine to back up your Mac? If so, you could restore the backup location on your Mac to before you did the restore and bring back you most recent backup that way.
Yes, I do use TM – I've been using it for a couple of years but have never actually had to restore anything. Just to be clear, I suppose you mean restore the backup folder from before I did the iOS upgrade, and then restore my phone from that?
How about this: if I do a restore from new first and see if that makes any improvement, do I then have an option of applying a dated backup (or would I have to go through the whole restore process again in order to do so)?
Yes, Navigate to the backup folder location, open time machine and restore to yesterday or when ever the last back was.
Duplicate the backup as above as a precaution.
Check iTunes recognises it. (make sure iTunes is closed when you are adjusting the backup files.
Restore to 'new' and check the phone. If it all is OK and working, its probably something in the backup and you don't want it back on your phone, and you will have to manually restore everything.
So unfortunately, you don't seem to be any closer to resolving the issue. Let us know if you want any more help, or alternately how you go with Apple.
I may try restoring from a previous backup via Time Machine, as you suggested. (This should also give me back my lost text messages.) There are also rumours that iOS 4.1 will be released today, so I may give that a try first.
Thanks once again for your very helpful suggestions.
If I were you, I would try to get the phone working before you worry about 4.1
Message was edited by: actionmarker

How can I create a data connection without ODBC (directly with OLE DB)

If connecting to an OLE DB data source, which is not defined as ODBC, the well known error message appears in Acrobat, that the environment is not trusted. The Designer Help says, that the document must be certified in Acrobat to run OLE DB without ODBC. So I certified the document in Acrobat allowing dynamic content for it. But the error message always appears. So I have some questions to this:
How is the correct certification process in Acrobat to define a trusted environment for using OLE DB without ODBC?
Why generates using of ODBC an trusted environment? With using ODBC data sources can be changed external from Acrobat, so I must think, ODBC is absolutely insecure.
Why is OLE DB without ODBC insecure? Here I have a defined connection string, which cannot be changed at runtime (if the form developer this doesn't want).
And why is the first record displayed instead of the error message, if using OLE DB without ODBC, but navigation is impossible?
This seems all very mysterious to me.
Does anyone in the world has ever created an OLE DB data connection (without ODBC) with Designer and Acrobat, which runs in a trusted environment?
Thanks for your answers.
Michael

For the Projects, the trick will be the Asset files. If they will fit onto DVD DL discs, you're OK. If they are too large (DV-AVI is ~ 13GB per hour), then you'll need some type of backup, or spanning software, that will write files across multiple discs. A better choice, IMO, would be a 1 - 2 TB external, where you can use Project Manager, or just Windows Explorer and Copy, to do the entire Project folder with Assets. I'd recommend against a USB and go at least for FW-400. FW-800 would be better, but you'll need FW-800 connections on your computer. eSATA would be the best, but then you'll need eSATA connectors.
Good luck,
Hunt

PDF form with XML data connection comes up blank at run time

Hello All,
I am a newbie to ADOBE Livecycle 9, but am very proficient in C#. I would like to request for your guidance on the following issue.
We have a desktop application in C#, WPF, Sqlserver. The requirement is to launch a Livecycle form from the application for the user to read/edit/save data
I have done this much so far -
Downloaded trial version of Livecycle 9
Developed a interactive PDf form
Created an XML based data connection. Generated fields on the form using the fields from this connection.
Set the .XML file as preview source for the form
the controls on the form are boumd to the xml data source
In design mode, the form works fine, it displays my data correctly
I have created a WPF form with a button. On click of this button, I call the Process.Start(pdf-file-path). My pdf is launched properly
I have added a combo box to my WPF form. I select a parameter from this, then call a stored procedure which returns me a datatable depending on parameter passed
Using the returned datatable, I have used the datatable.writexml and datatable.writexmlschema to create my XML and XSD files. as mentioned above, this xsd is used to create the data connection for the PDF and the XML for the preview source
This is what I want to do -
Launch the PDF from my WPF form, pre-populated with the newly created XML data from my WPF form.
So basically, as the user changes the selection criteria from the combo box, the XML file data will change and the PDF file will be launched each time with new data.
The XSD format will always be constant
Problem -
My XML and XSD get created properly, my PDF launches, but it is empty
If I change my selection criteria and run the WPF application, and then open the PDF in design mode, it asks me whether it should refresh the XML source. This means that the PDF form is connecting correctly to the XML source
So why then, does the form come up empty at run time?
What link am I missing?
I have found some sites that help using Web applications, but nothing for desktop applications. It would be fantastic if you could point me to some help for developing Livecycle forms with C# / SQLServer
Your help in this case will be highly appreciated.
Thanks and Regards

Oops, something happended with the above post. I will try again... I have tried your suggestion but I still get the same garbled XML (with data repeated and some values "cut in half". Here is what I get after decode-service and extract-to-XML-service. This is just the first barcode, the others are similar, sorry for the poor formatting, but I get a CDATA tage infront of the "istensen" value. CDATA:istensen</fld_ForMellemEfterNavn ><fld_VejNRpostByEnLinie >Superroad 99, 1330 Supertown</fld_VejNRpostByEnLinie ><fld_PrivatTelefonnummer >20724283</fld_PrivatTelefonnummer ></sub_Person ></sub_PktA ><fld_BlanketNr >kb0371ff</fld_BlanketNr ><fld_BarcodeCount /></form1 >/sub_Adresse ><sub_Person ><fld_ForMellemEfterNavn>Kim Christensen</fld_ForMellemEfterNavn ><fld_VejNRpostByEnLinie > Superroad 99, 1330 Supertown </fld_VejNRpostByEnLinie ><fld_PrivatTelefonnummer >20724283</fld_PrivatTelefonnummer ></sub_Person ></sub_PktA ><fld_BlanketNr >kb0371ff</fld_BlanketNr ><fld_BarcodeCount /></form1 Obviously this is not a legal xml-string, so I can do nothing about it. I have tried using a custom .NET component (ClearImage) for reading the same form (with the barcode) I get the correct data out from the barcodes. So I guess something is wrong with the decode-service in Barcoded Forms ES when I use compressed XML. But I can conclude since the ClearImage component can read the barcodes that they are compressed correctly. Can you help me with getting further with this problem? Sincerely Kim

Kit Kat data connection problems

Since updating to kitkat (among other problems) my data connection drops to 3G almost everywhere, and sometimes unexpectedly disappears completely. I used to have 4G everywhere most places and always in the two zip codes I primarily use the phone from. 02113 and 01970. Anyone know how to fix? Is this just one of the things they need to correct in the next kit kat update? Thanks.

I've had this issue for months. I've done everything Verizon suggested, including new sims, factory reset, toggling Airplane mode, LTE on/off, radio on/off, reboots, *#*#4636etc., and more. Nothing helps. My phone still intermittently loses the 4g connection. They haven't suggested trying a new (not new; reconditioned), but I don't want to go that route; I know others who have gotten a replacement, and it hasn't helped.
It isn't fixed in the upcoming update according to developers forums.
Some think it's due to Verizon's network; others believe it's an inherent problem in the 4g chipsets in these first generation LTE phones. I don't believe Verizon knows what's going on; they're just hoping the issue's fixed in the next gen phones, and the problem will go away. Of course the problem with that is that some of their customers who are stuck with these phones will also go away at the end of our contracts, especially if another wireless company manages to come out with a RELIABLE high-speed 4g network.

Incorrect MIME type for XML Data Connection POST requests

It appears that Xcelsius 2008u2019s XML Data Connection logic does not specify the correct MIME type for the data it sends to the server in its POST request. Using an HTTP debug proxy, I was able to see that Xcelsius sends XML data in the POST, but is setting a content-type of u201Cx-www-form-urlencodedu201D. According to the W3C spec:
http://www.w3.org/TR/html401/interact/forms.html#h-17.13.4.1
Data sent with a MIME type of u201Cxxu201D should be encoded as key?value pairs, like this:
key1=val1&key2=val2&Submit=Submit
So, what Xcelsius is doing is clearly incorrect. Worse, if your server process is a Java servlet, you may find that the POSTed data will be gobbled up by the servlet container and you wonu2019t be able to read it using a getInputStream(), or getReader() call because itu2019s already been processed by a call to the getParameter() method.
The correct mime type for POSTing an XML formatted request from Xcelsius should be "text/xml".
Wayne

Hi,
The Error #2032 your getting is due to the Flash player security.
To remove this this error you need one crossdomain Xml file in the root directory which actually provides a lot more control over who has access to your data from a SWF. The cross domain policy is attached as crossdomain.xml.
In the XML file, it is used a wildcard (*). This allows a SWF located on any machine to access your data source. You can certainly use an IP address or domain name to restrict access rather to opening it up completely. I always start with the wildcard to make sure my dashboard works, then start restricting access as necessary.
Here is a whitepaper with everything you need to know about Flash player security:
http://www.adobe.com/devnet/flashplayer/articles/flash_player_9_security.pdf
Please let me know if you need any more clarification.
Regards,
Sanjay

Managing data connections (5800)

I'm looking for documentation on how to manage the data connections on my 5800. I presume the documentation would be similar on other s60 phones.
For example:
- Can I get applications to always connect silently to one of my previously configured wifi connections, but to prompt me when it seeks to use the phone data connection unless I have configured the application otherwise ?
- Can I tell which data connections are in use at any given time?

Hi, if you're worried about network connection, best set to always ask, then phone won't connect unless you OK it. For setting 'priority' go to settings-connectivity-destinations-internet-options-organise-change priority and set wlan to 1, network provider to 2 etc. Phone will always try and use wlan and when unavailable will move down the list.
Hope this helps.
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Packet data connections n97

Hi,
I've had the N97 for a little while now, when connecting to the web I've always used the WAP services 'contract WAP' option as opposed to the Internet 'Contract Internet'. When taking out my contract with the phone I ensured that it included the mobile internet (free surfing etc) within the package
Whenever I've tried to connect via 'Contract Internet' as opposed to 'Contract WAP' I get the message 'Packet data connection not available'even when in a 3G area with full strength signal. I've made sure the phone settings are set to packet data where available etc. Is there something else I should be doing such as contacting vodafone to get them to activate the mobile internet on my number/account?
One other thing, have had the phone for 2 months and no matter how many settings I try the accuweather application never works, will only ever say 'loading', any fresh advice on that one?
Thanks in advance for any helpful advice.
Solved!
Go to Solution.

In your post, you mentioned contacting Vodafone to check if mobile internet was enabled on your account. Have you done this yet? If not, give them a call and while you're on the phone to them, ask them to send an SMS to your phone with their internet configuration settings which will program you phone with the right info.
If you've contacted them already and they've got it enabled, go to their website to check the details for mobile internet.
Regarding your Accuweather problem, have you downloaded the latest version from Ovi Store? I realise you can't do this out and about but do you have home wifi you can use? Not being able to access mobile internet will prevent Accuweather from working properly anyway.
Message Edited by matt_t on 23-Sep-2009 03:12 PM
Nokia N8 on O2-UK
Firmware 022.014

N97 packet data connection on hold

Good day,I have a N97 with an unlimited data plan. But I´m having a problem, when I receive or make call or send text message my phone show this message “packet data connection on hold”, and when I finish the call or sent the text message the phone shows “Packet data connection active”. There is any way that I can change this? I want to have my data connection always active.Thanks in advance for your help
Solved!
Go to Solution.

you would have to go into the settings - connectivity- the first tab is network - select this and it tells you network mode, select this and you can set it to dual mode - umts or gms only mode. if your phone was made for your region and it supports the frequency that the network provides then it should work in 3g if it does not which is possible then it will only work on edge
Message Edited by radical24 on 14-Jul-2009 01:26 PM
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Iphone data connectivity issue

Me and my wife are having problems with our iphones data connectivty with 3g (for the iphone 4s) and 3g&LTE (for the iphone 5). Although the cellular signal is frequently 4 or five bars, most often than not, we cannot browse or use any app because the data connection seems hanged. We always resort to either enabling/disabling the airplane mode, turning the cellular data off and on OR turning off and on the device and the browsing will be normal again and our apps able to access the internet. This experience is becoming a disappointment and we hope you could help us. Im sure we are not an isolated case as most of my friends complain similar experience. Thanks in advance.

Settings > General > Reset > Reset Network settings.
If the issue continues, basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
It may also be necessary to contact the carrier to troubleshoot the issue.

N8: Data connection is always on

Similar Messages

Maybe you are looking for