N8 - Difference between Models N8-00 NOKUS GRY and...

I'm a bit confused here.  I see that there are two version of the Dark Grey N8 available for sale here in the US.  One has NOKUS and the other NOKNAA.  Anyone know the difference between the two?

kirithigan,
PC Suite is effectively discontinued, and recent phones like the N8 are not compatible with it, so you will need to install the newer Ovi Suite.
I'm a little concerned that you stat that you don't have a 12MP camera, all genuine Nokia N(s have the same camera. If your observation isn't just based on the camera settings being changed to a lower resolution, it might be wise to have your phone checked by a Nokia Care point just to make sure that you have been sold a genuine product.
Likewise to the comments made in the original post some time ago, genuine Nokia N8s are always made from identical componets, Nokia does not produce different versions in Finland and China - differences in things like the charger depend not on where a phone is manufactured but on where it is intended to be sold. Similarly, packaging is an issue related to the sales markets not the production origin.
If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button.

Similar Messages

  • Difference between models G20 and G25

    Hi folks!
    I've been seeking a laptop and I was amazed with Qosmio.
    When I was going to order it, i noticed that there are lots of G20 models with different specifications. I also found G25 on internet searches and found no difference between G25 and G20 except that G25 TV receiver is NTSC and G20 was out on March and G25 was on June. They've the same specifications instead for the hard drive.
    I live in Portugal and the only Qosmio model I can find here is G20-118. I was looking for the model that has 2x100Gb SATA HD but can't figured it out.
    On internet researches i found Qosmio G20-111 that has 2x100Gb SATA HD but on the web page mentioned that it was a Pentium III processor (ridicule, isn't it?). I was looking for more reliable information.
    Already searched toshiba pages and didn't find specifications for all models that i found on web searches such as G20-102, 105, 106, 108, 109, 111, 118, 123,490LS, ...
    Can anyone help me with this? Is there any reliable web page where i can see the differences between models? is there any .pdf or anyone that can please give me some tips?
    Money is no problem at this time to acquire the laptop, i am only looking for the higgest performance laptop!
    Best Regards
    Joo Pereira

    Hi
    Its very difficult to say which unit is the best, because there are many models with different parts.
    Nevertheless I found page with G20 and G25 description.
    Take a look at this link.
    http://www.releasereview.com/Toshiba-Qosmio-G20-105-108-114.aspx?d=0101000580926052005
    Bye

  • What is the difference between the new 13" MacBook Pros and the previous version of the 13" MacBook Pro?  I purchased an "old" one from Best Buy the day before the announcement of the new models.

    What is the difference between the new 13" MacBook Pros and the previous version of the 13" MacBook Pro?  I purchased an "old" one from Best Buy the day before the announcement of the new models.

    See the specs:
    Compare Notebooks - Apple Store (U.S.)
    Compare with your model. If you are within 14 days of purchase you can exchange for the new model for the difference in price, if any. Be sure to have all the original packaging and your receipt.

  • Difference between SAP NetWeaver Gateway 2.0 and SAP NetWeaver Gateway productivity accelerator for Microsoft

    Hi Experts ,
    Can anyone tell me the difference between SAP NetWeaver Gateway 2.0 and SAP NetWeaver Gateway productivity accelerator for Microsoft ?
    Best Regards,
    SK

    SAP  Netweaver Gateway 2.0 is a product for Exposing ERP data as OData for external consumption which is independent of any Microsoft product. Using this you can model OData services and Expose them for light weight consumption. You can use this in use cases where  you just want to consume the OData in some client or so, and you do not want any kind of accelerators to help you in development or in your integration.
    GWPAM is an interoperability framework from SAP that leverages SAP NetWeaver Gateway and Microsoft technologies enabling customers and partners to easily and quickly compose solutions that consume and extend SAP throughout Microsoft technologies for on premise and on demand deployment. With GWPAM you get components like
    GWPAM Visual Studio Add-On,GWPAM Template,GWPAM Project,GWPAM Outlook Add-In which are very much Microsoft specific.

  • Differences between MacBook Air MD761D, MD761D/A and MD761D/B?

    Hey there,
    I just wonder which model I should buy or what the differences in the shops are.
    Does someone know what the differences between the numbers
    MD761D, MD761D/A and MD761D/B are?
    Can't find even these numbers on the official apple website.
    Thank you very much!
    Matthias

    marginal value, indeed.
    But some shops and internet sites operate with it instead of all technical specifications. So it's not so easy to understand what they are talking about.
    And in some other companies the /B stands for - don't know the English word - products which was sent back from the consumer and you won't know if it is ok or only dirty or have a problem with the quality.
    So I try to find out if there is an official meaning vor /B.

  • Difference between BW on HANA, Native HANA and HANA Enterprise..?

    Hi Experts,
    I am learning SAP HANA modeling.
    I am not able understand why there are three terminologies i.e., BW on HANA, NAtive HANA and HANA enterprise..
    Could you please tell me the "Difference between BW on HANA, Native HANA and HANA Enterprise..?"""
    I searched in sdn but not getting required info.
    Please share the links if you have.
    Thanks
    Asha

    Asha,
    BW is a SAP Business Application, which can run on many traditional relational databases and on the SAP HANA database, BW on HANA is the BW application running on the HANA database, for details please see http://scn.sap.com/community/bw-hana/faq
    Native HANA means in general that the code has been developed on HANA and specifically for HANA. For example BW has coding which can run on all databases which are certified for BW, and new code developed specifically for HANA = HANA native.  Or another example, HANA studio is a native HANA application.
    HANA enterprise is a license version of HANA. You can buy runtime licenses to run BW on HANA for example, and you can buy the enterprise license, which is a very comprehensive license to use many HANA capabilities. Please see your SAP account executive or SAP partner for details.
    thank you
    erich

  • Difference between HP ProBook 4330s B0X78EA, A6D90EA and LY466EA

    Does anybody know the difference between HP ProBook 4330s B0X78EA, A6D90EA and LY466EA model? Diff page does now show nothing.

    sam781 wrote:
     How can I find details of ATI GPU?
    Hi,
    Here it is:
      http://www.notebookcheck.net/AMD-Radeon-HD-6730M.43959.0.html
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Difference between using app server connection pooling and using the driver

    Hi all,
    How to get connection pooling with out application server and tomcat also?
    What is the difference between using app server connection pooling and using the driver supported connection pooling?
    Regards,
    Murali

    maybe the performance of App server pool is better than the JDBC pool,
    for you don't know wether the implementation of the JDBC interface is good or bad.

  • What the difference between u0093Valuate GL Account Open Itemsu0094 and u0093Valuate G/

    hi gurus
    What the difference between “Valuate GL Account Open Items” and “Valuate G/L Account Balances”?
    We found out that when we perform valuate GL account Open items there will be reversal done at the same time whereas when we perform Valuate G/L Account Balances there is NO reversal posting even though we hv entered the reversal posting date and Period.
    Pls advise which one we should perform?

    “Valuate GL Account Open Items” are for open item managed accounts including vendor/customer accounts. The valuation is performed for each (open) line items on key date specified.
    "“Valuate GL Balance" is for account NOT managed on Open Item basis but managed in foreign currency. The period balance of key date in foreign currency is valuated. Reversal document can be created by selecting 'Reverse postings' in "Postings" tab.
    Kyoko

  • Difference between the design of clusters PCLx and others like RFBLG etc .

    There are a few nagging questions which I was not able to find in the forum hence i have to post a new question.
    I am a little confused about the difference between the different clusters .
    If i start with RFBLG i.e. the cluster for BSEG BSEC etc ,I can see that the tables which are part of this cluster
    can be viewed through different methods like
    1) whr usd list for RFBLG
    2) dd02l table and give the required parameters there
    now when I compare this with another so-called cluster PCL1 if find that PCL1 is not recognized as  a cluster
    and also I am not able to see the same in dd02l table when i give PCL1 and the tabtype as cluster which I was able to see
    for the RFBLG ,there are other tables similar to RFBLG .
    1) SO what is the difference between the RFBLG type of clusters and the PCLx type of cluster
    2) are pclx and rfblg..type of clusters same ?
    3) why does PCL1 shows that it is a transparent table ? where as rfblg shows in a diff way in se11
    4) i know we access data from PCL1 using import and export stmts ,DO OR CAN WE DO THE SAME FOR RFBLG
    5) I found that each and evry cluster table had diff fields ,this was kinda surprising for me as I had been thinking
    that all cluster tables need to follow a certain rule ,SO WHO DECIDES THE FIELDS OF A TABLE CLUSTER ?
    6) PCL1 has the index button enabled ,which again I think is not according to the cluster table rules?how?
    7) I understand that we can save data in form of internal tables in the PCL1 cluster ,can we do the same in RFBLG ?
    8) Can I think on lines that PCL1 and RFBLG type of cluster are two totally different types of data dictionary objects
    and the usage and implementation of both of them is different and that the design and the BASE of both of such objects
    is different .
    I know this is a long list but I am sure that answers to these questions would really require some one who has really really work hard and invested a lot of time in understanding the dictionary system.I am awaiting a few answers ,few hints and a healthy discussion till we get them .
    Thanks ...
    a

    Hello,
    1/
    BSEG is a typical Cluster Table.
    This means that the physical table BSEG does NOT exist in the database, physical data for BSEG is stored in the database (table) cluster RFBLG.
    In ABAP however you can perform selects on BSEG (with all fields from the SAP repository structure, see SE11 on BSEG), during execution the SAP database layer will translate these statements to physical selects in the RFBLG database table, so in ABAP this is transparant.
    More info :
    [http://help.sap.com/saphelp_nw04/helpdata/en/cf/21f083446011d189700000e8322d00/content.htm|http://help.sap.com/saphelp_nw04/helpdata/en/cf/21f083446011d189700000e8322d00/content.htm]
    2/
    PCL1, PCL2, ... are normal SAP transparent tables, however in HR they are often called HR cluster table.
    Transparent tables are SAP objects where there is also a database table with the same name that contains the physical data.
    However the PCL tables are somewhat different from normal transparent tables (data is compressed, external programs can not interpret the data, ...).
    This means that in ABAP you can not use simple SQL statements to access data in PCL tables (because of compressed format).
    In stead statements like EXPORT TO DATABASE and IMPORT FROM DATABASE need to be used.
    More info :
    [http://fuller.mit.edu/hr/cluster_tables.html|http://fuller.mit.edu/hr/cluster_tables.html]
    Wim

  • Is there any difference between R/3 4.7 version and ECC 5.0????

    Hi All,
      Is there any difference between R/3 4.7 version and ECC 5.0 for the transaction RSA5.
    Regards,
    Andy

    Andy
    Functionality wise I didn't see any difference other than new datasources in ECC5.0
    Thnaks
    Sat

  • What is the difference between credit memo in invoice year and in next year

    Hi!
    I'm new here.I'm study SAP ERP.I don't know what is the difference between credit memo in invoice year and credit memo in next year (asset accounting).Can you show and give me an example, please!
    Thanks and best regards!
    Edited by: dinhtuan on Jun 28, 2010 3:10 PM

    Hi,
    Maybe have a look at the SAP Help for further information (http://help.sap.com) : e.g. 'Posting Credit Memos Integrated with Vendor'  or 'Posting a Credit Memo Offset Against a Clearing Account' 
    Transaction type 105 for credit memo on current acquisition made in the current year, posting key 75. Or transaction type 160 for credit memo on acquisitions from prior years. posting key 75.
    Note: determine if the asset was acquired in the current fiscal year or in a closed fiscal year (Display asset values).
    If the asset was acquired in a fiscal year that is now closed, correct the past depreciation using a write-up (in that case check out and refer to Posting Write-Ups).
    I hope this helps.
    Kind regards,
    Brigitte

  • What is the difference between these two reports MC.1 and MB5L

    Hi
    what is the difference between these two reports MC.1 and MB5L?
    what is the Purpose of each report?
    Material ledger is activated for this plant, we found some amount difference between these two reports, my client accounting department used to compare these two reports while year end/month end closing
    Thanks
    Raju

    MC.1 will give you the report for plant analysis as per plant .
    MB5L report will give you list of stock value as per G/L account wise.

  • Difference Between SAP ECC. 6.0 and 4.6c

    Hi
    What is the Difference Between SAP ECC. 6.0 and 4.6c
    with respect to module wise, like SD, MM, FI,
    thanks
    Satish

    Hi,
    There is lot difference between 4.6c and 6.0
    1) ecc 6.0 coming with inbuild webdynpro , BSP it is not 4.6c
    2) In ecc we have interactive forms concept where it was not there in 4.6c
    3) 4.6c there is no unicode concept here we have unicode and non unicode
    You can follow the link also
    difference between SAP 4.6C and SAP ECC6.0
    Rgds,
    Suman

  • Difference between Oracle9i 9.2.0.3 and Oracle9i 9.2.0.4 JDBC Drivers

    Hi everybody,
    Can you tell me what is Difference between Oracle9i 9.2.0.3 and Oracle9i 9.2.0.4 JDBC Drivers briefly?
    In my application I am using Oracle9i 9.2.0.3 JDBC Drivers. But it is not supported when I retrieved Data with junk character from CLOB.because of IO Exception it showing Bigger type length than Maximum
    if i used Oracle9i 9.2.0.4 JDBC Drivers it is working properly.
    I am using WAS 4.0.3 , JDK1.3 and Oracle 9.0.
    Shall I use Oracle9i 9.2.0.4 in my application and I want to know it will create any new problem in my application or not ?
    please Reply me ASAP.
    i am waiting for your reply
    thanks a lot
    bye
    Message was edited by:
    paulusazapakcom

    Can you tell me what is Difference between Oracle9i
    9.2.0.3 and Oracle9i 9.2.0.4 JDBC Drivers briefly?Search the Oracle site. That should tell if there are any differences at all. I would assume that there would be some bug fixes.
    please Reply me ASAP.
    i am waiting for your replySuch lines are better avoided.

Maybe you are looking for