N8 does not start or recharge after being empty

My N8 does not recharge or start after battery beeing empty. I tried hard reset, more than 8s start button, charging with mini usb or original charger, at laptop or charger, just dead.

If the Battery is totally drained sometimes it takes a few minutes of charge to show the charging indiactor... If you have not done this then leave it on charge and check after about 10 minutes...

Similar Messages

  • My 2011 MacBook Pro does not start and stop after the apple appear, they said that the problem is a video problem and need to change the logic board. Cost almost same to buy a new one. Somebody have the same problem?

    I have a MacBook Pro early 2011. Does not start. After the apple show, a blank screen appear. The service said that the problem is with the video plaquue in the logic board. Need to change. Cost lmmost the same than a new MacBook Pro. Somebody has the same problem? What we can do?

    I hate to break this to you, but life isn't fair. If your job is that critically in need of a computer, then you should have a spare to use for just this kind of situation or have your employer provide you with a computer to use.
    Computers break down, just like cars. If your car breaks down do you curse the car maker or get it fixed? Surely, you paid more for your car than the computer.
    This is reality. Best get used to it because it won't get any better.

  • IPhoto does not start to update after my iMac was updated to OS X Yosemite.

    iPhoto has been "paused" after my iMac was updated to OS X Yosemite. iPhoto does not start to update when I click "UPDATE" in App Store "Updates". The circle on the left top corner just keep circling. Do you know how to fix this problem? I cannot download my photos to iPhoto without updating it.

    Thank you LarryHN,
    I could not follow what you have explained to me as I struggled to find iPhoto 9.6. Anyway, while I was struggling, I managed to update iPhoto somehow. Finally, I can use iPhoto!
    Thank you very much for your quick response.
    Tama Chan

  • Compressor does not start the job after submit button clicked.

    Hello All,
    FCP 6.0/ Compressor 3.0.5
    I am trying to export a section of a FCP timeline sequence (set with in and out) thorugh Compressor, into a couple of video formats (DVD and a custom H.264). After I set the destination and make surte that the source file is in place, I press "Submit" button and again "submit" from pop-up window and nothing happens. No usual window with the job processing appears, like it ussually does. I restarted programs and computer and no change. Compressor quitted unexpectedly few times within the same process of initiating export from FCP. I tried test export from a different FCP project and the compressing does not start either after pressing "submit".
    I did not have this problem before. I would greatly appreiciate any suggestions.
    Best to all,
    Izabela

    Dear ToddNashville,
    Thank you so much! This was it! It was processing but did not see the process as the "ghost" icons of the new exporte files in destinations would not appear immiediately as I thought they usually do. Once they are completed or 1/2 way through they appear.
    I did not try the batchlist before. It is so clear as far as whats running and how much time left! I hope all will process fine.
    Thank you!

  • HT5815 my macbook pro 15 inch 2.2 does not start up anymore after update, even after shift V.

    after installing the update the machine rebooted. But only the apple logo en circle appeared. and then....stuck.
    a hard shut down and reboot with Shift hold down until the bar did get it in safe mode (or was it the command V) but it freezes there....

    Another post did add some light to it too.
    Finally my mac started up. Backing up now. :-) tnx
    Kappy      Tampa, FL and Vancouver, BC
    Re: PROBLEMS WITH 10.8.5
    Sep 13, 2013 10:43 PM (in response to papanast)
    You might try this:
    Repair the Hard Drive and Permissions - Lion/Mountain Lion
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Then download and install: OS X Mountain Lion Update v10.8.5 (Combo).

  • Executable does not release serial port after being stopped

    Greetings:
    I have created an executable that communicates through a serial port.  However, if I stop the executable (not close it), the executable still has control over the COM port.  This causes issues if I need to jump on Hyperterminal to send a couple quick queries to my system.  In order to send the queries, I have to actually close the executable in order to release the COM port.  It's problematic because I then have to start the executable back up, go through another configuration query, etc. and there are parameters from the previous run I would prefer to not lose.
    Is there a way to force a LabView executable into releasing it's hold on a COM port after it's stopped, without closing the executable completely?  If it makes a difference, I'm using LV 7.1 on a WinXP machine.  Thanks for any help!

    Gumby_Dammit wrote:
    I changed the settings to have the stop button visible in the menu bar along with the start button.  This is because the user has to select their COM port before continuing.  
    Raven has already said it but I'll say it a different way.  No user should ever interact with the front panel unless the VI is running.  And when it is running the user should never have access to the abort button in the toolbar.  When you open Internet Explorer do you first need to click the run button?  No it runs when you run it.  Write your program so it is always running, and doesn't have an abort so if the user closes the program you can run the proper clean up like closing COM ports.
    Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
    If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

  • Installed Firefox 4. But, it simply does not start. Freezes after I presss 'Search'

    I have just finished downloading Version 4. Switched off the computer. Started again by clicking on the shortcut icon. Somewhat bland screen appear, just giving a bar for search. When a search is typed in and 'search' button clicked, there is no response --- as if nothing is active!

    Follow these steps to fix it:
    Firefox Menu > Options > Toolbar Layout > Place your Reload button to the left of the Stop button and they will integrate after you close the Customize Toolbar box. Do the same, but place them to the right of the address bar and they will integrate into the address bar.
    Hope this helps!

  • MacBook Pro does not start up properly after yosemite, I see a black screen. What to do?

    Apple MacBook Pro 15 " 2.4iC2D/2x1Gb/160Gb/256V, 07-02-2008, always properly updated.
    Lately Iphoto worked slow and stuck many times. After ugrade from Maverick to Yosemite had to upgrade IPhoto as well.
    After that the laptop started 2 or 3 times, after that it showed me a black screen.
    I succeeded to connect with a firewire cable the laptop to my Mac and could look into the laptop.
    Unfortunately there was a power break, and I don't succeed in reconnecting.
    The laptop stays warm and I hear (I suppose) the hard disk.
    What to do? I want to find my fotos and put them on the Mac.

    I went to apple today and they told me that the hard drive has unmounted itself. They have my macbook right now and they said they're going to replace the wire that connects the hard drive to the logic board and see if this solves the issue. If it doesn't work they will replace the existing 250GB hard drive in my macbook with a 500GB as they no longer make that size hard drives (cost of £130 for the replacement). The problem is that i dont have my macbook backed up so will there be anyway to get data off the od hard drive?

  • HT1476 I have tried to charge the phone via computer and main socket it does not start up even after sometime and remains unable to start up any ideas ?

    Unable to charge I phone 4s remains dead , can I get a new battery installed ?

    Yes still nothing, it was showing 50% then crashed out for no reason. Now nothing

  • FMS does not start (windows 7)

    FMS does not start in win 7.
    There were some starts but only when first run after the installation. (i checked it 3 times) After the computer reboot, FMS does not start. Whats the problemm ?  And one more quastion: where can i find server address ?

    Do you see the FMS and FMSAdmin services running in your machine?
    Is your concern that FMS does not start by itself after restarting your machine? Or your were not able to start FMS.
    To connect to your server using Administration Console, Enter your server name or IP in "Server Address' text box.
    Regards,
    Janaki L

  • My iPhone4 does not start after it was out of charge and recharged again?

    My iPhone 4 does not start after it was out of charge and recharged again?

    Hi Svedjot,
    Welcome to the Support Communities!
    The following article will provide some troubleshooting steps for this issue:
    iPhone, iPad or iPod touch: Not responding or does not turn on
    http://support.apple.com/kb/TS3281?viewlocale=en_US
    Cheers,
    Judy

  • WebAnalysis does not start after workspace is set on Windows Authentication

    I've used [doc Hyperion System 9.3.x Configuring the BI+ Workspace for Single Sign-On (SSO) with Internet Information Services (IIS) [ID 1100096.1] to configure SSO for workspace users. It works fine. Though since then the WA service does not start anymore. The error message which is raised sounds very very familar but still I am not able to tackle it. The message in the log or the analysis console is "[WARN] [STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.analyzer.utils.general.HYAUtil - Wait for workspace [
    [WARN] Timer-2 com.hyperion.analyzer.utils.general.HYAUtil - ."
    I am very sure it had something to do with rights/ permissions, but also after playing around with IIS and ntfs permissions for hours I can't get SSO en WA both working at the same time.
    As soon as I set my workspace aplication in IIS on windows integrated, the SSO is working but as soon as a I restart the WA service it fails to start. When I set the workspace application IIS on anonymous the WA service start fine but then the SSO is not working anymore.
    It drives me crazy.
    Hopefully its a small matter for you to solve!
    Thanks in advance.

    Dont know exactly whats happened but I presume something went wrong during the update procedure.
    If you will be not able to start the notebook in the safe mode or to boot the notebook then user the Toshiba recovery CD to gets the notebook working!

  • Firefox does not start up after an automatic update. Every time i try to open it, it just prompts the Mozilla Crash Reporter.

    Firefox does not start up after an automatic update. Every time i try to open it, it just prompts the Mozilla Crash Reporter.
    ''Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:3.6.10
    BuildID: 20100914125854
    CrashTime: 1290192405
    EMCheckCompatibility: true
    FramePoisonBase: 00000000f0de0000
    FramePoisonSize: 65536
    InstallTime: 1287124738
    ProductName: Firefox
    ReleaseChannel: release
    SecondsSinceLastCrash: 422
    StartupTime: 1290192405
    Theme: classic/1.0
    Throttleable: 1
    Vendor: Mozilla
    Version: 3.6.10
    This report also contains technical information about the state of the application when it crashed.''
    Same thing happens when i click restart.
    No difference when i run it in Safe mode. And it won't let me create a new profile either. Is there anyway else i can extract my bookmarks? This is driving me crazy!

    Did the crash reporter send any crash reports?<br />
    You can see the crash reports in this folder:
    "C:\Users\&lt;user&gt;\AppData\Roaming\Mozilla\Firefox\Crash Reports"
    See: http://kb.mozillazine.org/Breakpad
    See also [[Firefox crashes when you open it]]
    Create a new profile as a test to check if your current profile is causing the problems.<br /><br />
    See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting&#58; Make a new profile]]<br /><br />
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"<br /><br />
    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)<br /><br />
    See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox<br /><br />
    If that still causes the same problem then do a clean reinstall and remove the Firefox program folder.
    * Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    * Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    * Don't remove personal data when uninstalling.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    See:
    * http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • Premiere Elements 12 does not start after error message: display driver is incompatible

    After successful installation and starting Premiere Elements the following error message appears: "Uncompatible display driver identified. Update the display driver for a better and faster playback performance!" Hopefully my translation from German is helpful enough. I confirmed with OK but unfortunately Premiere Elements does not start. I checked the display driver: it is the most actual one: AMD Radeon HD 7610M. Furthermore the hardware should be OK as well: ASUStek with an Intel Core i5-2450M CPU @2.5 GHz; 6 GB RAM; 64 Bit Windows 7 Service Pack 1. What can I do?

    Moonkeys25
    Recap...please confirm that as of this date, the problem exists with or without the antivirus and firewall(s) disabled.
    Moving forward...
    If you issue was specific to the display card error that you have been getting then probable conclusions
    a. the ADM Radeon H7610M driver version is not up to date
    or
    b. the ADM Radeon H7610 M video card/graphics card installed as is is not compatible with Premiere Elements 12 on your Windows 7 SP1 64 bit
    The updated driver version and the BadDrivers.txt file deletion should have corrected the problem unless there is a gross mismatch between Premiere Elements 12 and ADM Radeon H7610M.
    Did you use the link that John posted to get the auto detection of the latest driver version for the ADM card?
    If we have gone as far as we can with the card and its driver version angle on this, then we can try the generalized troubleshooting drills with no guarantees, just hopes
    1. Delete the Adobe Premiere Elements Prefs file and, if necessary, the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists.
    Local Disk C
    Users
    Owner
    AppData
    Roaming
    Adobe
    Premiere Elements
    12.0
    and in the 12.0 Folder is the Adobe Premiere Elements Prefs file that you delete. If that does not work, then you delete the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists. You just need to make sure to have the computer's Folder Option Show Hidden Files, Folders, and Drives active so that you can see the complete path cited.
    2. If "1" has no effect on the issue...uninstall, ccleaner run through time, reinstall with antivirus and firewalls turned off.
    a. Control Panel/Program, select Adobe Premiere Elements 12, right click the entry and click on the Uninstall pop up. Then follow the instructions for the uninstall.
    b. Download and install the free ccleaner for a computer run through to get rid of leftovers from incomplete uninstalls and installs.
    https://www.piriform.com/ccleaner/download
    When you are ready for this step, I will give you a step by step through the ccleaner (regular cleaning part and registry cleaning part).
    c. Reinstall from your installation files or installation disc, with antivirus and firewall(s) disabled.
    Please review above and then let me know if I have interpreted correctly where we are in the troubleshooting. Do not start the above plan until we are in agreement on the details and hoped for results.
    Thanks.
    ATR

  • I have a big problem with Lion and PGP. After upgrading from snow leopard to lion I cannot access my PGP drive which was generated under snow leopard. PGP does not start but gives a notion that lion cannot work with my PGP version. Solution?

    After upgrading from Snow Leopard to Lion I cannot access a PGP drive which was generated under snow leopard. PGP does not start. When I try to start I just receive a message that Lion cannot work with PGP. How can I now access important and confifential informatio which I have stored in PGP (snow leopard). Do I have to move back to snow leopard. If so, how can I do this? 

    If you have this product,
    http://www.symantec.com/business/support/index?page=content&id=TECH165159
    you have to go back to Snow Leopard.
    To re-install SL, back up your home directory, format and re-install.

Maybe you are looking for