N8/e7 and asian language support

does either of the n8 or e7 still classified as NAM version and non-NAM version?
and does either phones support asian/chinese fonts?
i.e. can you change the OS language to chinese?
and
can the browser display proper chinese fonts?

dear nokia,
i live in greece and baught the e7 on a journey in Essen, Germany. At the time i had Anna and i asked to have the greek language and so i had.
yesterday i downloaded Belle and while everything is ok and the phone seems nice and fast with good shortcuts, i noticed that the greek language is no longer available either as writing neither as phone language.
the most weird thing is that all my contacs are in greek and so does the messages!
since the phone understands greek why is it that i cannot load a greek writing language patch?
at the local Nokia Care Point in athens kifisia they asked me for 16euro to load the Greek language witch is a huge disappointment for me since there is not a single warning for this problem when you load Belle via the computer.....
the least you could do is first warn for the problem and while working on new language packs
make the operetion FREE of charge from every nokia center!
you made this happen so you are the one to blame and ultimately you are the one that has to pay for this! or you are just going to lose clients who are dedicated nokia "fans" like me....
and something else... we are not talking about a nokia 100 here but for the top of the line E7, THE communicator phone, with an asking price of over 400 euro when new....
thanks for your time and i hope you anwser.
Nikolakopoulos Spiros
athens greece

Similar Messages

HELP!! Installation of OS X Panther 10.3 stops at Asian Languages Support

I had trouble trying to move the user directory onto another harddrive so I have had to reinstall from scratch. I have a clean harddrive that has been formatted (extended journalled) twice, and written over with zeros...
When the installer get to 'Processing Asian Languages Support' 38% it stops dead and doesn't continue. No error message is displayed. It was frozen for a least 24 hours before I rebooted and tried again, but to no avail.
Can anybody offer any advise?

gemmakls:
The G4 (Gigabit Ethernet) shipped with OS 9.0.4.
With a HDD that has been reformatted, and the data zeroed, you should not have a problem installing unless:
1. You have improper of faulty install disks
2. there is some hardware issue.
Here is what I suggest:
1. Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel, and report if it says anything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need to use a utility like Tech Tool Pro or Disk Warrior
2. If that does not help run Apple Hardware Test from the disc that came with your computer.
Good luck.
cornelius

Asian Language support in Acrobat 3D 8/TCS

I've spent hours and days to solve a problem with PDFs containing Japanese text, which refused to be copied/pasted into other applications. Then someone told me, it works on his PC using my PDFs the same that didn't work here. Well, it turned out that he had installed the Asian language packs for *READER*, which I didn't use. And which should *not* be used with Acrobat Pro or 3D, according to well-informed Acrobat gurus.
In their KB articles, Adobe gives instructions like these: "To make Asian fonts available for downloading to a printer, be sure you have downloaded the fonts to your computer using the Custom or Complete installation option during installation of Acrobat."
Well, after searching, reading, trying, re-installing etc., I have to say: THERE IS NO CUSTOM INSTALL OPTION in Acrobat 3D/TCS. I have NO option to install Asian language support within a suite that carries "communication" in its name. Technical communication *is* worldwide communication.
Interesting enough: after installing the Reader language packs, the required functionality was there (copy/pasting of asian characters), but currently I'm not sure if I damaged my system (or reduced its functionality) by installing Reader fonts for Acrobat 3D.
So, what do I have to do in order to achieve *full* support for Asian characters in Acrobat 3D/TCS? Any idea?
Bernd Meissner

Olaf,
before I wrote this posting there has been a whole lot of testing here. The situation in short words: I've created PDFs containing Japanese characters in Illustrator and in InDesign. Here on my PC I've not been able to copy/paste (e.g. to Word) any characters from the Illustrator PDF, that were created using OTF fonts and converted to "Type 1 CID/Identity H" fonts. A similar file created in InDesign worked without problems.
There have been a lot of strange things happening I was, for example, able to copy the characters in question (Illustrator PDF, OTF fonts) from Acrobat Pro on my Mac and paste them into Word (Windows) running in a Parallels VM. I could NOT do this within Windows from A3D to Word.
After sending my test PDFs to the German FrameUser mailing list, I got a response from one person (as noted above). And: after installing the Japanese Reader fonts, I suddenly was able to copy the characters within Windows. There must be something that has changed. Copying the characters over to Mac ceased to work in this moment, but has worked before. So the Reader font installation seems to do more than just install fonts although I don't know what it could be.
You'll get my test files within the next minutes
Thanks for caring :-)
Bernd

Install Asian Language support files, how?

I just purchased Acrobat XI Pro, and am running it under Windows 7 Ultimate.
How do I install the Asian Language support files for Acrobat?
After my initial installation, if I execute setup.exe to modify Acrobat XI, only English is listed under Languages.
BIll

I scanned a page with Chinese text and the resulting PDF showed all gray.
Based on your suggestion that the files may already be installed, I scanned the same Chinese text again and it scanned correctly.
Probably it was a one-time error. Everything seems to be working now. Thank you for replying.
Bill

East Asian language support for adding closed captions (Japanese)

I am trying to add Japanese subtitles to my project as closed captions. However, once added the Japanese captions show as little white boxes in the preview pane.
Is there no way to add Asian language support so it displays?
I am using Premiere Pro CC (US English version although I am located in Japan).

Hello drummonds,
Is your Mac connected to an internet connection?
Is your device unlocked and you are using a different carrier than that of the one branded to your device?
Backup your device data and reinstall your software as shown in KB19915; once the reload completes try going back into the Add/Remove applications tab.
Let me know how you make out.
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

PlayBook Asian Language Supports?

Hi, I'm from Thailand. Just want to know if anybody know when the Thai and other Asian Language Supports(Especially Keyboard) will be available?
I heard the rumours that it is gonna be next February. Right now with OS2.0 Beta can read perfectly but still miss the keyboard.
Anyone have an idea would be appreciate.
Thank you

Windows: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5508
Mac OS: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5509

Cannot install Asian language support files

My user wants to type Chinese character at the PDF document. I tried to install Asian language support for the Acrobat Adobe 9 Standard with the OEM CD. However, I had a problem with it. Instead of installing; it asked for the Acrobat Adobe 9 Standard - EFG - CD. What's wrong? It look like the Acrobat CD version is wrong, but it came with this computer. Is it caused by installed wrong version of Acrobat security patches? If yes, how to fix it? Uninstall Acrobat Adobe 9 then reinstall it? Any suggestion!!! Thank you in advance.

I scanned a page with Chinese text and the resulting PDF showed all gray.
Based on your suggestion that the files may already be installed, I scanned the same Chinese text again and it scanned correctly.
Probably it was a one-time error. Everything seems to be working now. Thank you for replying.
Bill

N800 with Asian language support

Does anyone know if there is software for support Asian languages? I'm specifically interested in traditional and simplified Chinese. I travel to China and Taiwan about twice a year and the N800 would be a nice tool to have on those trips. Any recommendation is appreciated.

Found my own answer on maemo.org site.
Here is the link:
http://maemocjk.garage.maemo.org/
Click on the OS your using, download and install. After install, reboot and you're set.

Win 8.1. Core language and multi-language support.

HI,
I've used a US developed program with multi-language support for years in Win XT and Win 7. As the program now supports win 8.1. I've upgraded to 8.1. and the new release of the program. However it will not work properly and the reason given is
that my version of 8.1. has a different core language compared with what the program uses and this version is not multi-language supported. Now I wonder if there are various versions of the core language in 8.1. or is the core
language unique, supported by various language packets for menu's, guiding texts, etc. Why do I then need a multi-language supported program? Where can I put this question?
Regards
Sverre

I'd probably try them here.
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=fsharpgeneral%2Cvcgeneral%2Cvbgeneral%2Ccsharpgeneral%2Cwindowsgeneraldevelopmentissues&filter=alltypes&sort=lastpostdesc
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Timeline for adding Bengali and Swahili language support

Any ideas on when Bengali/Bangla and Swahili will be added to the list of languages that Translator supports?

Does a multiple language supported Windows Phone 8 Application support Bengali Language (Bangladeshi language) at now?
If it is possible, then how user will change the app language from phone setting to show the app in Bengali / Bangla (Bangladesh)?
FYI .. From Microsoft OEM documentation, I have known that Windows Phone 8.1 GDR2 includes support for Bangla (Bangladesh
language).

Help Oracle 10g+PHP and Bengali language support !!!!

Hi All:
i have a emp having a column names namewhich is of nvarchar2 datatype. What I want is to insert a value from a html from which will insert Bengali language as my input to the name filed in my database and show me the same on the browser when required.
Here am attaching a sample code which am using to connect/insert and show my table. This is working perfectly fine.
Please help me as am unable to insert data in local language. Please guide me the steps how to configure the NLS_LANG and how to do it.
ht.html
=====
<form action="insert.php" method="post">
<p> Your ID : <input type="number" name="id" /></p>
<p> Your NAME: <input type="text" name="name" /></p>
<p><input type="submit" /></p>
insert.php
=======
<?php
# if ($REQUEST_METHOD=="POST")
// Before running, create the table:
// CREATE TABLE MYTABLE (mid NUMBER, myd VARCHAR2(20));
$dbuser = "bob";
$dbpass = "bob";
#$dbtsn = "orcl"
$dbconn = oci_connect($dbuser, $dbpass);
echo "The Oracle Database established";
$query = "INSERT INTO demo
(id,name)
VALUES('".$_POST['id']."','".$_POST['name']."')";
$resultSet = oci_parse($dbconn,$query);
if (oci_execute($resultSet))
echo ("<BR> Record inserted");
else
echo ("<BR> error!!!!!!");
?>
showv.php
========
<?php
$conn = oci_connect('bob', 'bob', 'orcl');
if (!$conn) {
$e = oci_error();
print htmlentities($e['message']);
exit;
$query = 'SELECT * FROM demo';
$stid = oci_parse($conn, $query);
if (!$stid) {
$e = oci_error($conn);
print htmlentities($e['message']);
exit;
$r = oci_execute($stid, OCI_DEFAULT);
if (!$r) {
$e = oci_error($stid);
echo htmlentities($e['message']);
exit;
print '<table border="2">';
while ($row = oci_fetch_array($stid, OCI_RETURN_NULLS)) {
print '<tr>';
foreach ($row as $item) {
print '<td>'.($item?htmlentities($item):' ').'</td>';
print '</tr>';
print '</table>';
oci_close($conn);
?>
I am using RedHat Enterprise linux 4 update 1 and Oracle 10g.
Regards,
Pradyumna

Right... I found out how you can solve this, well not through the web interface... but oh well it is possible though...
the error I was getting was: ORA-01704: string literal too long.
the keyword/phrase is "bind variables"... Did a little more searching and found this site:
http://www.akadia.com/services/ora_bind_variables.html
So basically you use bind variables to insert data which fills more than 4000 bytes...
Since the data I will be inserting will be inserted via Java/.NET application I found the section called "Bind Variables in VB, Java and other applications" the most interesting... During my testing and I had neglected to use PreparedStatements in Java, and according to the site, using PreparedStatement provided an easier solution as the API does most of the work for you. My solution was to create a small program which read the large amounts of data from a file then feed this to a PreparedStatement, setObject or setASCIIStream/setCharacterStream, then execute it.
Well I hope this helps other people who get the same error code.

JDeveloper9i and native language support

I'm working on Read Hat Linux 7.3 with JDeveloper9i RC2. I wonder how I can use characters in comments, UI components e.t.c. Russian characters are displayed not properly nor in IDE code editor nor in resulting app. How can I setup JDeveloper to use native language characters?

You can implement graphs in many, many ways, it depends on what you want to use them for. That's why the choice is left to the programmer. An easy and basic means to do it in Python and probably other languages is using dictionaries of "neighbour vertexes", which can be done without loading any module.
If what you're searching is a general use language that implements a specific graph structure, I don't think there's any, and I would find that awkward.

Asian language support for Nokia E7

Hi,
I cant view any web pages in other languages except english in E7.I cant even install anyother fonts in E7. Can anybody help me to view and type in other languages, and to install other fonts?
Solved!
Go to Solution.

dear nokia,
i live in greece and baught the e7 on a journey in Essen, Germany. At the time i had Anna and i asked to have the greek language and so i had.
yesterday i downloaded Belle and while everything is ok and the phone seems nice and fast with good shortcuts, i noticed that the greek language is no longer available either as writing neither as phone language.
the most weird thing is that all my contacs are in greek and so does the messages!
since the phone understands greek why is it that i cannot load a greek writing language patch?
at the local Nokia Care Point in athens kifisia they asked me for 16euro to load the Greek language witch is a huge disappointment for me since there is not a single warning for this problem when you load Belle via the computer.....
the least you could do is first warn for the problem and while working on new language packs
make the operetion FREE of charge from every nokia center!
you made this happen so you are the one to blame and ultimately you are the one that has to pay for this! or you are just going to lose clients who are dedicated nokia "fans" like me....
and something else... we are not talking about a nokia 100 here but for the top of the line E7, THE communicator phone, with an asking price of over 400 euro when new....
thanks for your time and i hope you anwser.
Nikolakopoulos Spiros
athens greece

FB sdk 4.5 and multi-language support

Hi All,
I found this article
http://devgirl.org/2011/03/15/flex-4-localization/#step4
My app need to support couple languages. I am getting errors in FB 4.5 - SDK 4.5.1 using this configuration, does anyone know how works?
Thanks in advance.

Hi,
I found this article:
http://help.adobe.com/en_US/flex/using/WS2db454920e96a9e51e63e3d11c0bf69084-7f2d.html#WS2d b454920e96a9e51e63e3d11c0bf69084-7f34
I follow adding new locales.
Still have the error:
unable to open 'C:\Program Files (x86)\Adobe\Adobe Flash Builder 4.6\sdks\4.6.0\frameworks\locale\en_US,es_ES'
I'm sure something simple is missing.
Any ideas?
It is a way to attach my test app zip file here?
Thanks

English and Korean language support, buying in Korea?

The guy in the mac store told me all the macs can switch between Korean and English or whatever language. Are the operating systems the same but just selected for a main language? Would I be better to order one online from Canada or US? I do sometimes type in Korean and would like to have mainly an English system with the ability to toggle between typing English and Korean (hangeul) characters. If I buy in Korea the keys will actually have the hangeul characters on them, which is a bonus, but I'd like to know the operating system is the same and that I'll have no problems. I don't want all my menu's in Korean or nothing like that.
Also from what I've read I am thinking it would come with Leopard. Am I right or should I have posted this in a different forum?

OS X is the same no matter where it is sold and can switch among the 18 languages listed in its tech specs by simply changing preferences settings.
http://www.apple.com/macosx/techspecs/
Regardless of the language of the OS, the user can select dozens of input keyboards separately via different preference settings. This includes 5 or 6 Korean input methods.

N8/e7 and asian language support

Similar Messages

Maybe you are looking for