N8: Email widgets stop responding

Having the following issue with my N8, and wondering if anyone has a solution:
Once in a while, email widgets stop auto updating and responding to taps. Nothing happens if I tap on a widget - no email displayed, no error message. It doesn't show new messages until I manually open email application and check the corresponding mailbox.
The only way (or so it seems) to fix this is to remove all email widgets, reboot the phone, then add widgets back. A simple reboot does not work.
Since this problem happens every 2 or 3 days, it's becoming quite a nuisance. Any suggestions?
Thanks,
-legalalien
P.S. BTW, I've noticed a few places where N8 applications show no error message and instead do nothing (e.g., when I select Go to Music Store). Very annoying.

Neither the widgets nor the mail when accessed responds.. but strangely the mail account (over the browser) does show the mail being read/accessed..
I have been trying to remove the mailboxes.. but they seem to be taking an awful lot of time.. ( with widgets go offline mode )
Can any software developer from the NOKIA team shed some light on this.. before I plan to move on to a better working phone..
It sucks to have a flagship phone which behaves like this.. Why doesn't NOKIA test their products before putting them in the market..
Best wishes.

Similar Messages

When trying to upload a document or attach a document in an email Firefox gives me an error "Failed to load CTDFMRES.dll" and stops responding, I have no issues in any other browsers. And I am using Firefox 4, Fixes???

When trying to upload a document or attach a document in an email Firefox gives me an error "Failed to load CTDFMRES.dll" and stops responding, I have no issues in any other browsers. And I am using Firefox 4, Fixes???

You don't have to disable any addons or extentions!!!You guys are not going to believe this I figured out the problem it's really dumb...ok here goes the attachment uploader loads seperate so I got to thinking it's a popup so I went to options content and under block pop ups there is an option exceptions click on that and in the box type firefox.com and hit allow pow its fixed!!!!! :-)

Windoe 7 Everytime when I close the brouwser by clicking on the x I get a message that a script on the page may be busy, or it maybe stopped responding. Continue or stop script. I never had this problem with XP Sincerely Wiliam email removed

When I am done browsing I close the browser by clicking on the X. Since I use Window 7 I always get the message "A script on this page may be busy or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete"
Script: chrome://bp/content/bp.js:857.
If I continue it takes anywhere from 5 to 15 minutes to complete
William <i><email removed - c></i>

That will be due to an extension that is not working properly, possibly the Better Privacy extension. To test this, if you have Better Privacy installed try disabling it to see if the error stops appearing. To do that, in the Tools menu select Add-ons, then go to the Extensions panel, select Better Privacy in the list, then click on Disable. re-start Firefox to complete the process, then see if the error message appears.
If you do not have Better Privacy installed, repeat this process with the other extensions until you find the culprit. First check any extensions with the initials bp.
If it is Better Privacy, it should work with Firefox 3.6.13 on Windows 7. Make sure you have the latest version, also try uninstalling it and re-installing it, this may help if your version has become corrupted.

Hello - my safari on my ipad2 gives the following message "safari could not open the page because the server stopped responding"...email works fine and I can download from the app store...seems to just be a safari issue

Hello - my safari on my ipad2 gives the following message "safari could not open the page because the server stopped responding"...email works fine and I can download from the app store...seems to just be a safari issue

Marc-
The Safari message is probably telling the truth. Is the problem repeatable at several websites, or is it only with a particular one? If all websites, you may have trouble with your internet connection downloading large amounts of data. Mail messages are relatively small unless there are attachments or embedded images.
Fred

IPad informs me that "Safari could not open the page because the server stopped responding" I cannot access emails or interneton Ipad.

Ipad message "Safari could not open the page because the server stopped responding". I cannot access emails or internet.

Thankyou for suggestion. My PC was working ok ( accessing emails/internet) which puzzled me. It's usually the PC that drives me nuts and the iPad that is great.I discovered my TV was having difficulty with a connection to broadband. I turned off the main Wifi router and switched it on again and all seems to be well. My IPad was suggesting, however, that all was well with the Wifi connection. It had a tick against it in Settings. Very strange!
Byron

Windows stops responding and closes when I try to print

I have IE 9 on a vista 64 bit. Recently I had some problems with print jobs staying in the que. I resolved that and reinstalled the printer and drivers. I have a photosmart 5514. Ever since that day I can't print off a webpage. Coupons, bank statements etc. It says windows stopped responding and closes the webpage. I have been unable to fix this. Also since that day my microsoft works wont' work. It says I have corrupted fonts!

It is a wireless connection. What happened first after a year of flawless performance was I was asked to print a statement from my banks website. I tried several times and it kept shutting down with the windows error above. I was unable to print anything from that moment on. I spent half the day finding the problem and discovered my WP network key was changed. I have no idea how trying to print from the banks site did that. I called them to report the situation since it was so strange. Even asked them if they knew what that number even was. I still had issued so I just uninstalled the printer and used my installation disc to set it up again. Now I can print off my documents, PDF or Word but my Works files come up with the message that the font cache is missing or renamed. When I searched that I found it isn't uncommon and that it is usually a corrupted printer driver. I loaded it off my CD from HP. Not sure what to do now other than try to uninstall and reinstall. Just haven't had a time with work to do that yet. Also when I try to print off an email, webpage or even a coupon it does the windows has to shut down message. This will be my last HP printer. I have problems all the time with them and have owned nothing but HP for over 20 years. Four computers and printers in the house right now. I just can't deal with que issues and buying new printers every two years because I have a home office and must have it working.

When I try to view my full att bill firefox stops responding and closes ALL pages. I have to open explorer to view it!

I am trying to view my ATT wireless bill, and when I ask to view the full version it opens another window and says receiving data from ATT. This doesn't ever change and when I hit any key on any other window in firefox then I am told that firefox has stopped responding and must close.

No release of Pages v5 can open AppleWorks, Pages '05, Pages '06, Pages '08, or RTF documents. Sometimes, it cannot open its own documents.
You will need to do one of the following:
Borrow your MacBook Pro back until you can export all your incompatible documents to MS Word (Which Pages v5 can open)
Install your iWork '08 DVD on your new Air, and then immediately apply the following Apple Updaters. Again Export to MS document formats.
Pages v3.0.3
Numbers v1.0.3
Keynote v4.0.4
Purchase iWork '09 DVD, and then immediately update with Apple iWork 9.3 updater.
Open the document(s) that Pages v5 won't permit
Save as Pages '09 v4.3 documents, or export as MS Word
Upload to Zamzar, and convert to MS Word (free for limited volume)
No sensitive documents
Email notification within 3 - 4 minutes with MS Word document download link
After you do either item 2 or 3, run Disk Utility and verify/repair application permissions on your boot drive. Open your converted documents in Pages v5.

Why does Shockwave Flash "stop responding" only around 1-3 pm? Works fine mornings and evenings.

For the past couple of weeks I've been having this issue. Everything works fine all morning, and then mid-afternoon, Mozilla goes haywire and I get an "unresponsive plugin" error message, telling me Shockwave Flash "has stopped responding". It derails my entire computer system, everything ends up "not responding" (every single window, tab, program, even pictures and Word documents) then after I spend half an hour moving at the speed of molasses to save, close, and restart things, then it continues working just fine for the rest of the evening. It ONLY happens around 1 to 3 pm.
It's aggravating to say the least. And I can't figure out why. Everything I have from Adobe is up to date, all of my plugins in general are up to date, and I've been using the same exact websites for work for years but this has only cropped up recently.
Any ideas? Should I just take a long lunch and avoid my computer from 1 to 3?
PS: I'm the only person home, and my wifi requires a password, so it's my internet service fighting a crowd or anything.

I'm not paying for Norton for the toolbar, I like the Internet Security options in general.
It has this "Vault" that stores all your website passwords, and "Identity Cards" to store financial information, addresses, etc. I feel safer having this information stored in Norton (which I gave the most unique and secure password I could think of) rather than storing these details on individual websites.
Heaven forbid anyone ever steal my computer, they won't be able to access ANYTHING unless they can hack into Norton, which is the only password I hand-type. Before I got it, I used to have Firefox save it for me, but there was no security in that. Anybody could open up, say, Amazon.com, and log right into my account, and instantly have access to my credit card and change the mailing address. Using Norton Internet Security, they can't get into any of my accounts (shopping, banking, email, etc), and even if they do, they won't find any sensitive info available.
As for Firefox 22, I just clicked "update" the other day (before then canceling) because it specifically said the plugin wasn't available, and I need it for the options I just mentioned. The next time it prompts me, I'll look again and see if it's ready yet.

External Drive Stops Responding

I have a Western Digital 500GB Studio Edition. The drive works fine with transferring small amounts of data (a few GBs), but when I try to use Time Machine to back my whole computer up (~70GB), at some point the drive stops responding. There is no pattern as to where when it stops working, it could be 17kb, it could be 69BG, but I have never been able to complete a backup.
What happens is that after a certian amount of time, the drive just stops responding. The "Ready light" is on, as if it is just waiting for me to use it, and Time Machine thinks it is still backing up, but its not. This also happens outside of Time Machine, if I just have the drive running for a while, the drive stops working. This is also accompanied by Finder freezing up until I unplug the drive. Sometimes (but not every time) I also have to unplug the drive from the outlet in order to get it to respond again.
This may be unrelated, but I am using Firewire 800, which, as I understand, should be able to transmit data at 800MB/s, but it is dramatically less than that. Again, the speed varies, but it is usually around just a few MB per second. I understand that this vary with the drive and computer, but I think that a year old drive/MBP should be able to transfer data close to 800MB/s.
I have a windows partition, and I experienced the same problems, especially when playing game stored on the drive. I recently got an eSATA ExpressCard, but unfortunately the drivers are only available for Windows. I haven't had any problems with the drive not responding since I have been using the ExpressCard, and data transfers have been very fast (again, not sure how fast, but games now run like they did on my internal hard drive).
I made sure my drivers were updated, I even installed the "WD Turbo Drivers". The Partition Map Scheme is GUID Partition Table. Under Energy Settings in System Preferences, I unchecked the box "Put the Hard Disk to sleep when possible".
I can't seem to find anyone else who has had this problem in the forums, or elsewhere. Any suggestions would be greatly appreciated.
Thanks

You're probably right, that it's some problem with the drive. You might want to search this forum for similar posts, also see what Western Digital might have to say. I don't have any experience with WD, but some drives have sleep/inactivity settings that don't play well with TM.
But to be sure there isn't a TM problem, like a file it doesn't like, download the +Time Machine Buddy+ widget from: http://www.apple.com/downloads/dashboard/status/timemachinebuddy.html. It shows the messages from your logs for one TM backup run at a time, in a small window.
If you see something there that seems suspicious, copy and post the messages here (be sure to get them all, as sometimes they overflow the small window).

Why does Thunderbird stop responding when I attempt to close the programme?

Thunderbird stops responding whenever I attempt to close the program. If I click on the 'X' top right or rt-select >close window, from the task bar the Thunderbird window either turns white and freezes and reports that it is not responding. Then Microsoft asks if I want to wait or close the program. I have tried waiting but there's only so many hours in a day!
I have also been having problems lately with loads of emails that should be, and previously were junk appearing in my in box; a load of salicious emails. I thought the problem was with the trash folder but I deleted the trash folders and tried to install a new trash folder as a sub-folder of my inbox but the small install window froze as did the main Thunderbird window. Now I no longer have a trash folder and after several reboots Thunderbird continues to freeze and does not respond.
I removed both Google Chrome and Thunderbird and re-installed them without any apparent result. I have shut down all extensions. And would appreciate your help in getting Thunderbird up and running again.
I am running a two year old HP Pavillion 64 bit with Windows 8.1

Start *Windows'* safe mode with networking enabled
- win8 http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-safe-mode
- win7 http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7
- XP http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx
Still In Windows safe mode, start thunderbird in safe mode
- http://support.mozillamessaging.com/en-US/kb/safe-mode
Does problem go away?
Please post to let us know

Thunderbird opens in Windows 8.1 then stops responding. Why?

I cannot use Thunderbird and have reverted to Windows Live Mail which I hate. I can open Thunderbird. It will show any new emails but if I attempt to click on any thing else the program stops responding. I have tried to uninstall without success so that I can try a new download - equally without success. Anyone out there can help please? I'm running Windows 8.1 on a HP 64 bit All-in-one.

Try to start *Windows* in safe mode with networking enabled.
- Win8 http://windows.microsoft.com/en-US/windows-8/windows-startup-settings-including-safe-mode
- Win7 http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode
- XP http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx
Still in Windows safe mode, start Thunderbird in safe mode.
- https://support.mozilla.org/en-US/kb/safe-mode
Does the problem go away?

Windows Server Essentials Connector stops responding during install Win 7 Pro to 2012 R2

I am trying to reconnect a Win 7 Pro computer to a new Essentials 2012R2 and when it asks me to set it up for just me or multiple users a message pops up saying
it has stopped responding. It sets up a profile of _clientsetup_$ and it shows up in dashboard as an offline device. This computer was hooked up to an Essentials 2012R2 previously. Tried uninstalling the connector software, removing the computer from the domain,
renaming the computer and re-installing the connector software from the http://(server)/connect. Even tried backing up the existing profiles and creating a new clean one and went through the above procedure with the same results. I set up 4 others
with no issues and it would be the bosses computer that fails. I am a newbie so any help would be greatly appreciated, thanks.

Hi,
Sorry for my interrupting.
Would you please let us know whether this problematic client computer was upgraded to Windows 7 Pro from a previous OS? Did you install any third-party application on this Windows 7 Pro client computer? Just a confirmation, thanks for your understanding.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

IPhoto 6.0.3 Stops Responding When I Try to Edit, Except . . .

. . . when I set it to edit in Full Screen or via an outside like like PS.
By going in to Preferences I can set it to edit when I double-click an image with different actions via:
In Main Window: Stops Responding
In Separate Window: Stops Responding
Using Full Screen: Works
In (other app): Works
The same applies when right-clicking and image and selecting Editing methods from the menu.
I have rebooted, used "Rebuild Photo Library" dialog to rebuild the thumbs and images in iPhoto's library. I have repaired disk permissions, run MacJanitor and rebooted again.
I have not reinstalled iPhoto 6.0.3.
I have seen numerous references to identical issues here and elsewhere on the 'net on OS X troubleshooting boards.
I have about 9500 images in my library. There was a difference this time in how I acquired the new images I'm working with. Normally I import images into my Picture folder using Image Capture from my Nikon D70. The files are all JPEGs about 2-3.5MB each. This time I imported them into my wife's Dell laptop using the Windows Image Capture import (not sure what they call it) and then when home, I connected the Dell up to my network and dragged the folder into my Mac's Picture folder, then imported the images into iPhoto by dragging them.
Otherwise they appear to be identical in permission, file type and metadata. And the freezes occur when trying to edit the new Dell-drags or old, directly-imported D70 files.
JoeL

Hi Dave,
And thanks for taking the time to respond.
This is what Console is telling me when I first open iPhoto:
===== Monday, June 5, 2006 4:32:31 PM US/Eastern =====
2006-06-05 16:32:37.114 iPhoto[230] loaded /Applications/iPhoto.app/Contents/NetServices/Bundles/KeywordAssistant.NetServi ce
2006-06-05 16:32:39.326 iPhoto[230] IPTemplate: /Applications/iPhoto.app/Contents/Resources/Themes/SimpleCanvas-FoldedCard-V.IP BookTheme has no category.
2006-06-05 16:32:39.331 iPhoto[230] IPTemplate: /Applications/iPhoto.app/Contents/Resources/Themes/SimpleCanvas-FoldedCard.IPBo okTheme has no category.
2006-06-05 16:32:39.340 iPhoto[230] IPTemplate: /Applications/iPhoto.app/Contents/Resources/Themes/SimpleLinen-FoldedCard-V.IPB ookTheme has no category.
2006-06-05 16:32:39.345 iPhoto[230] IPTemplate: /Applications/iPhoto.app/Contents/Resources/Themes/SimpleLinen-FoldedCard.IPBoo kTheme has no category.
2006-06-05 16:32:39.355 iPhoto[230] IPTemplate: /Applications/iPhoto.app/Contents/Resources/Themes/SimpleParchment-FoldedCard-V .IPBookTheme has no category.
2006-06-05 16:32:39.359 iPhoto[230] IPTemplate: /Applications/iPhoto.app/Contents/Resources/Themes/SimpleParchment-FoldedCard.I PBookTheme has no category.
2006-06-05 16:32:39.365 iPhoto[230] IPTemplate: /Applications/iPhoto.app/Contents/Resources/Themes/SimpleParchment-Postcard-V.I PBookTheme has no category.
2006-06-05 16:32:39.371 iPhoto[230] IPTemplate: /Applications/iPhoto.app/Contents/Resources/Themes/SimpleParchment-Postcard.IPB ookTheme has no category.
2006-06-05 16:32:39.378 iPhoto[230] IPTemplate: /Applications/iPhoto.app/Contents/Resources/Themes/TallFlowers-FoldedCard-V.IPB ookTheme has no category.
2006-06-05 16:32:39.383 iPhoto[230] IPTemplate: /Applications/iPhoto.app/Contents/Resources/Themes/TallFlowers-FoldedCard.IPBoo kTheme has no category.
2006-06-05 16:32:39.388 iPhoto[230] IPTemplate: /Applications/iPhoto.app/Contents/Resources/Themes/TallFlowers-Postcard-V.IPBoo kTheme has no category.
2006-06-05 16:32:39.392 iPhoto[230] IPTemplate: /Applications/iPhoto.app/Contents/Resources/Themes/TallFlowers-Postcard.IPBookT heme has no category.
2006-06-05 16:32:39.396 iPhoto[230] IPTemplate: /Applications/iPhoto.app/Contents/Resources/Themes/Travel-Hardcover.IPBookTheme has no category.
2006-06-05 16:32:39.399 iPhoto[230] IPTemplate: /Applications/iPhoto.app/Contents/Resources/Themes/Travel-Large.IPBookTheme has no category.
2006-06-05 16:32:39.403 iPhoto[230] IPTemplate: /Applications/iPhoto.app/Contents/Resources/Themes/Travel-Medium.IPBookTheme has no category.
2006-06-05 16:32:39.407 iPhoto[230] IPTemplate: /Applications/iPhoto.app/Contents/Resources/Themes/TropicalLeaf-FoldedCard-V.IP BookTheme has no category.
2006-06-05 16:32:39.413 iPhoto[230] IPTemplate: /Applications/iPhoto.app/Contents/Resources/Themes/TropicalLeaf-FoldedCard.IPBo okTheme has no category.
2006-06-05 16:32:39.418 iPhoto[230] IPTemplate: /Applications/iPhoto.app/Contents/Resources/Themes/TropicalLeaf-Postcard-V.IPBo okTheme has no category.
2006-06-05 16:32:39.422 iPhoto[230] IPTemplate: /Applications/iPhoto.app/Contents/Resources/Themes/TropicalLeaf-Postcard.IPBook Theme has no category.
2006-06-05 16:32:39.425 iPhoto[230] IPTemplate: /Applications/iPhoto.app/Contents/Resources/Themes/Watercolor-Hardcover.IPBookT heme has no category.
2006-06-05 16:32:39.429 iPhoto[230] IPTemplate: /Applications/iPhoto.app/Contents/Resources/Themes/Watercolor-Large.IPBookTheme has no category.
2006-06-05 16:32:39.432 iPhoto[230] IPTemplate: /Applications/iPhoto.app/Contents/Resources/Themes/Watercolor-Medium.IPBookThem e has no category.
2006-06-05 16:32:39.560 iPhoto[230] IPTemplate: /Applications/iPhoto.app/Contents/Resources/Themes/StoryBook-Hardcover.IPBookTh eme has no category.
2006-06-05 16:32:39.569 iPhoto[230] IPTemplate: /Applications/iPhoto.app/Contents/Resources/Themes/YearBook-Hardcover.IPBookThe me has no category.
Then I clear the above and try to "Edit" a photo:
Zero, zip, nada, iPhoto just stops responding. OK, so I restart iPhoto and try "Edit in Separate Window and Console says:
===== Monday, June 5, 2006 4:43:02 PM US/Eastern =====
2006-06-05 16:43:09.755 iPhoto[241] Could not find image named 'zoom-downN'.
2006-06-05 16:43:09.778 iPhoto[241] Could not find image named 'zoom-downH'.
2006-06-05 16:43:09.801 iPhoto[241] Could not find image named 'zoom-upN'.
2006-06-05 16:43:09.824 iPhoto[241] Could not find image named 'zoom-upH'.
(and of course, it iPhoto stops responding.
"Edit in Full Screen" and "Edit in External Editor" both work fine and result in no Console responses.
So now let's try "Slideshow" and this is the Console response when I select two images and click "Slideshow":
===== Monday, June 5, 2006 4:50:07 PM US/Eastern =====
2006-06-05 16:50:10.545 iPhoto[251] Could not find image named 'tools-switchLeft-N'.
2006-06-05 16:50:10.569 iPhoto[251] Could not find image named 'tools-switchLeft-P'.
2006-06-05 16:50:10.593 iPhoto[251] Could not find image named 'tools-checkboxOff-N'.
2006-06-05 16:50:10.616 iPhoto[251] Could not find image named 'tools-checkboxOff-P'.
(and of course iPhoto freezes)
So the main culprits are "Edit", "Edit in Separate Window" and "Slideshow" while "Edit in Full Screen" and "Edit in External Editor" both work fine as do the other controls such as "Rotate", "Edit" (the "edit" button at the bottom of the viewer window which opens the "Edit in Full Screen" function), "Card", "Calendar", "Book", "Email", "Order Prints", "iWeb", "Photocast" and "Play" which all work every time.
I have since reinstalled the combined OS X 10.4.6 updater, the iPhoto 6.0.3 updater, booted into Safe Mode and tried all of the above (identical results) and unmounted all volumes except the OS volume and tried everything (same result). I also deleted all of the images that I imported from my wife's Dell machine and emptied the trash and then restarted.
I tried the suggestion of checking permissions of image files, but permissions are all correct.
I have no idea where to head next with this.
JoeL

DA client getting with error Main mode SA assumed to be invalid because peer stopped responding.

Facing one issue with only DA client , it connects to Direct access for few seconds and then get disconnected.
Looking at error on Event viewer I see below error
Any help appreciated certificate looks ok on client not sure why IPSEC is still failing.
Main
An IPsec main mode negotiation failed.
Local Endpoint:
                Local Principal Name:
                Network Address: fd03:c8e4:6dc5:1000:65c3:ec29:19db:d27
                Keying Module Port:
500
Remote Endpoint:
                Principal Name:
                Network Address: fd03:c8e4:6dc5:1000::1
                Keying Module Port:
500
Additional Information:
                Keying Module Name:         IKEv1
                Authentication Method:      Unknown authentication
                Role:
Initiator
                Impersonation State:
Not enabled
                Main Mode Filter ID:
0
Failure Information:
                Failure Point:
Local computer
                Failure Reason:
No policy configured
                State:
No state
                Initiator Cookie:
9859f832aff8f6c2
                Responder Cookie:
0000000000000000
Quick
An IPsec quick mode negotiation failed.
Local Endpoint:
                Network Address: ::
                Network Address mask:       0
                Port:
0
                Tunnel Endpoint:
fd03:c8e4:6dc5:1000:65c3:ec29:19db:d27
Remote Endpoint:
                Network Address: fd03:c8e4:6dc5:7777::405a:e2f2
                Address Mask:
0
                Port:
0
                Tunnel Endpoint:
fd03:c8e4:6dc5:1000::1
                Private Address:
0.0.0.0
Additional Information:
                Protocol:
0
                Keying Module Name:         AuthIP
                Virtual Interface Tunnel ID: 0
                Traffic Selector ID: 0
                Mode:
Tunnel
                Role:
Initiator
                Quick Mode Filter ID:
148975
                Main Mode SA ID: 9
Failure Information:
                State:
Sent first (SA) payload
                Message ID:
3
                Failure Point:
Local computer
                Failure Reason:
Main mode SA assumed to be invalid because peer stopped responding.

my "Personal"
================ Certificate 0 ================
Serial Number: db275ae51a55dc55fbe5
Issuer: CN=Communications Server
NotBefore: 3/27/2015 5:16 PM
NotAfter: 9/23/2015 5:16 PM
Subject: CN=[email protected]
Non-root Certificate
Cert Hash(sha1): b3 1a 83 46 a7 3b 35 81 d5 b8 df 4a cf c7 b5 84 3d 16 4f 19
Key Container = [email protected]
Unique container name: c8d28464bd8e19954e01e055a437dac2_9a8ca7a5-b032-4abe-aa4f-78479e291b9e
Provider = Microsoft Enhanced Cryptographic Provider v1.0
Private key is NOT exportable
Signature test passed
================ Certificate 1 ================
Serial Number: acf56029651a29985555bc204feec2906e0e623c
Issuer: CN=Token Signing Public Key
NotBefore: 11/2/2014 1:10 PM
NotAfter: 11/9/2014 1:10 PM
Subject: CN=8cb8436c5273712d
Non-root Certificate
Cert Hash(sha1): 96 40 a0 e3 d8 d3 a1 83 3d 7d 53 89 78 13 ec ea 14 57 59 e2
Key Container = IDENTITYCRL_CERT_CONTAINER_781dc55f-39ad-4acf-908b-077a9f0892c0
Unique container name: fa2317742ecd4995840a96d529ded279_9a8ca7a5-b032-4abe-aa4f-78479e291b9e
Provider = Microsoft Enhanced Cryptographic Provider v1.0
Encryption test passed
================ Certificate 2 ================
Serial Number: 1ecfdba10000000711f6
Issuer: CN=certificates1.bentley.com, OU=IT, O=Bentley Systems Inc, L=Exton, S=PA, DC=bentley, DC=com, C=US
NotBefore: 10/14/2014 3:00 PM
NotAfter: 10/14/2015 3:00 PM
Subject: E=[email protected], CN= user name
Non-root Certificate
Template: 1.3.6.1.4.1.311.21.8.11654720.1572043.7097246.3836610.15498332.49.1051303.5974672, Bentley User
Cert Hash(sha1): 34 b0 4d a3 c0 ea 3f 91 c4 e8 1f bf bc a3 eb 8d 0e 13 71 3b
Key Container = le-BentleyUser-b08f3f78-54cf-490e-9778-24c8c7bb9c0e
Unique container name: fe0554406294c67f04d3b9898a803d95_9a8ca7a5-b032-4abe-aa4f-78479e291b9e
Provider = Microsoft Software Key Storage Provider
Private key is NOT exportable
Encryption test passed

Exchange Server 2010 Outlook Client Stops Responding

Greetings- This issue is with Exchange Server 2010 sp2 using Outlook 2013 clients in AD environment. Single server, single database (80GB) , 60+ users, Windows 8/8.1 workstations.
All of a sudden our users started experiencing issues yesterday. One or two at first, then more.
The issue where Outlook stops responding. This is most noticeable when you try to send and receive. The recipient will get the email before outlook clears it from pending submissions in the outbox.
1. SMTP is fully operational
2. Push clients functions normally
3. Exchange is fully updated and current
4. The mailbox databases are verified and healthy
5. Network traffic to and from the server appears normal according to wire shark
6. Setting Outlook to use no cache connection mitigates the issue partially
7. The issue is global on all deployed OS's
As this is happening on many, maybe all, workstations, my thought is that is has to do with Exchange, not the client.
Thanx
You should never, never doubt what nobody is sure about. -Willy Wonka

Does this happen all day, or at specific times? I'll add that your server appears to be light on CPU, but without knowing its CPU profile (when idle and when under a load), I can't say for sure this is your issue. One additional thing I can
ask - do you have hyperthreading enabled? This can be a bad thing in an Exchange server. See the following:
https://technet.microsoft.com/en-us/library/dd346699%28v=exchg.141%29.aspx?f=255&MSPPError=-2147217396#Hyper and the following:
http://blogs.technet.com/b/exchange/archive/2013/05/06/ask-the-perf-guy-sizing-exchange-2013-deployments.aspx Note that this second note is about Exchange 2013, but it goes into more details on some of the issues that may be adversely affecting your
Exchange 2010 servers.

N8: Email widgets stop responding

Similar Messages

Maybe you are looking for