N8 headphones adapter not functioning normally

I am not able to use my Nokia supplied headphones with the N8 - seems like the jack is connecting with the wrong contacts

tachyon wrote:
Also , make sure you insert the headset cable fast. If you do it slow, the N8 might recognize it as a different device. In my case, it mistook it for a headphone instead of a headset. I inserted it quickly and this time it properly recognized it as a headset.
yeah its a really annoying feature, making the controls on the headset wont work half of the time cause you dindt jam it in fast enough or you need to jam it in again before it gets it

Similar Messages

Headphone jack not functioning

Anyone had issues with the headphone jack on a gen4 iPad that stops working? Any resolution?

Hey there,
It sounds like the headphone conenction is not functioning correctly. I would use the troubleshooting in the following article named:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
No sound through stereo headset
Inspect the headset jack for debris and clean if necessary.
Connect the headset and make sure the connector is pushed in all the way.
Check the volume setting. Adjust the volume by pressing the volume up and down button on the left side of the iPhone.
If you are trying to listen to music and cannot hear any audio, make sure that the music on iPhone is not paused. Try squeezing the headset microphone to resume playback. Additionally, from the Home screen you can choose iPod > Now Playing, then tap Play.
Make sure the latest version of iTunes is installed on the computer that you are syncing the iPhone with (songs purchased from the iTunes Store using earlier versions of iTunes won't play).
Try another Apple headset (some third-party headsets require an adapter to be used with original iPhone).
Try a different song or video.
Check to see if the iPhone alert sounds or other iPhone sound effects exhibit the same audio issues.
Disconnect the headset from the iPhone and see if sound comes from the built-in speaker.
Thank you for using Apple Support Communities.
Regards,
Sterling

My headphone are not functioning correct

Ok, recently i just found this forum and im glad to post my problem here. I am using SB Li've! 4., everything is working fine except my headphones. It's like only my Right side is working and my left side is not working when i plugged the plug into the GREEN output. I am using it for gaming and since only right side is working it really affect my game play and i have been changing from Surround speakers to Stereo Headphones but still only RIGHT side is working and left side is not working at all, i tried with my ear piece yet, only my right side is working and left side is not working. But if i pushed a little hard on my HEADPHONE's plug sometimes both side is working fine and if i let go of my finger it becomes right side working and left side not working. So what is the problem? My headphone and ear piece are new, yet both got same problems. Please help me.
Silver279

I did use on other devices, the only one i used on is my computer. Is it something wrong with my soundcard, settings or what? I had the latest drivers, and some upgrading softwares on it and also i changed every settings I could see on the Sound settings and tested with different outputs and they are not even working at all. The only solution is sometimes i pressed very hard on the plug it only work awhile but then no more if i let go of it. I bought a new headphone a few hours ago and its the same still, and I go to Sound settings and change from Surround speakers to Stereo Headphones and then to Surround speakers and to Stereo Headphones again and again like 20-30 times repeatly and it worked fine. But after i rebooted my PC it became the same, One side can be heard and the other side is not functioning at all, I might need to switch repeatly again in Settings to make it work again.. so.. its really annoying and after sometime my headphone maybe will get affected by mass-mass-switching.. please help me thanks !

Receiver file adapter not functioning

Hi guys,
We have developed some interfaces that are exporting some .txt files in ftp locations and therefore they make use of receiver file adapter. Although the receiver file adapter used to function properly some days ago, for some strange reason, it stopped receiving any files. This happens only in XI development system but not in XI production system. In XI development, in Runtime Workbench --> Communication Channel monitoring, I can see this communication channel's status as correctly configured and started, with a green sign on the right, but it is not responding when some files are sent to it, and therefore there are no output files in target directory.
Any ideas?? It is urgent.
Best Regards
Evaggelos

Udo,
Hi Amit,
I went into Message Monitoring for this interface and I can see all the messages for the last 24 hours that should be written into a file that have status "to be delivered".
When I go into Details -->Audit Log for a single message:
2007-06-13 11:49:33 Success Processing child message of multi-message with message ID ff896d50-198a-11dc-cdfa-00145e694b16
2007-06-13 11:49:33 Success Using connection File_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
2007-06-13 11:49:33 Success Message successfully put into the queue.
And in Message Data there is the following information:
Status To Be Delivered
Repeatable Yes
Cancelable Yes
Error Category
Error Code
Start 13.06.2007 11:49:33
End
Sender Party
Sender Service TPBS_GR
Receiver Party
Receiver Service TPBS_GR
Interface http://famar.gr:LoyaltyDataMNSToSRS
MI_LoyaltyDataMNSToGR_IB
Quality of Service Exactly Once
Message b2685674-7626-5141-bfa1-13155ad0d25a
Reference
Conversation ID
Serialization Context
Direction INBOUND
Message Type Recv
Profile XI
Connection File_http://sap.com/xi/XI/System
Transport HTTP
End Point http://fmgralxi01:50000/MessagingSystem/receive/AFW/XI
Authorization
Sequential Number 0
Number of Retries 3
Failed 0
Retries 300000
Valid to
Persist Until 13.07.2007 11:49:33
Schedule Time 13.06.2007 11:49:33

Headphone Jack Not Functional; Windows 7

I couldn't find anywhere more appropriate for this, so I figured I'd post it here.
When in Windows 7, my headphone jack is completely nonfunctional. Doesn't work for anything, at all.
I have installed the Boot Camp drivers, and I've tried several fixes from the internet. Nothing works. I use my headphone jack all the time, and it's a huge inconvenience.
If anybody can help me out, I'd appreciate it

I hadn't, thank you.
I'm glad I'm not imagining things and other people are having the same issue. Fingers crossed someone more savvy than me will figure out how to fix it properly.

Tile Animation Not Functioning Normally

On my profile the animation on the tiles is flipping rather than sliding (I can't think of a better way to describe it). I've checked the other profiles on my pc and those tiles are working properly. I'm not sure why it's functioning this way. I've looked
at a few things. The apps work fine, it's just the animation and it's annoying! I like the slide better. Any suggestions?

Hi,
Have you configured the computer in Best appearance mode?
Right click Computer -> Properties -> Advanced system settings -> Under Performance and click Settings -> Check on Adjust for best appearance:
Hope this could be helpful.
Kate Li
TechNet Community Support

Firefox's latest update could not cope with the latest java update. So my computer is not functioning normally. Why?

I just downloaded the latest firefox. I got a message that there was something about the latest java that it could not cope with. I did not think that it would be a problem so I downloaded. However when I loaded up the betfair page I could not get the list of sports to come up. So then I started clicking on symbols to f.ind a help button. I am not very computer literate. I eventually clicked the bookmarks button and tried to look at an item but ended up with a reduced size homepage overlaying the bookmark page and It seems to be stuck.The restore item on the history page is not working so what can I do?

If you mean this one:
It's the orientation lock, it stops the display rotating when you rotate your phone.
You can turn this on/off from the control Centre which you can reveal by swiping upwards from the bottom of the screen.

Multi-touch display is not functioning as normal

multi-touch display is not functioning as normal on the right half of the screen....

Hi James,
Thx for the quick reply...
I have already tried most of these troubleshooting steps but no go....
Also, when you tap or use only the right half of the screen, the touch display is inconsistent and makes a wierd sound [ like a hollow tub or something ] and it's not a cosmetic issue...
----Apple store / Authorized Service Center is still working on this ongoing issue with no results and still not confirming for the iphone replacement...Thnx..

I am backing up to my time capsule for the first time. It has been stuck on 348mb of 20.1 gb for days. Is this normal or is the machine not functioning correctly?

I am backing up to my time capsule for the first time. It has been stuck on 348mb of 20.1 gb for days. Is this normal or is the machine not functioning correctly?

That seems to be OK via WLAN!
It ist better to do the first backup via LAN-cable.

My computer freezes when I connect either of my two Classic iPods. As soon as I disconnect the computer functions normall. This happens whether I have iTunes open or not

When I connect either of my iPod Classics my computer freezes whether I have iTunes open or not. I have a second computer which functions normally when I connect my iPods. Any advice would be welcome.

Your problematic PC, has some software or most likely the Winsocks of some plugins is in conflict with iTunes, if both PC has the same version of iTunes and Windows.
If you run the Task manager, compare both PC and see what process is missing in the good one, and that software is the culprit.
Then removed it from your bad PC, if you dont need it, but most likely you'll need it, as it is the graphic card or some video software.
Have a nice day!

StarTech Adapter not working with Dell Inspiron 15, model 3521

Side Note: I wrote a reply to a thread that was from 2013. I do apologize because the link was sent to me by my bf and I did not realize how old it was. Since my reply has to be approved I can't delete it.
Current Issue: StarTech Adapter not working with Dell Inspiron 15 model 3521
I bought my Dell laptop last year and at first I did not realize that it had only one audio jack (combo, as the specifications manual says), I only noticed when I was trying to plug in my Ozone Rage ST headset.
I searched online threads and found out that I needed an adapter and most people mentioned Headset Buddy. I couldn't find any adapters for sale in my country (or employees didn't really know what I was talking about) and since Headset Buddy is a bit expensive, I decided to try StarTech Headset adapter for headsets with separate headphone/microphone plugs - 3.5mm 4 position to 2x 3 position 3.5mm M/F www.amazon.com/.../ref=cm_cr_pr_product_top.
It arrived today and let me tell you that I can't make it work. I can hear everything but I can't get the external mic to work or even be detected. I have always used my headset (mostly for gaming) and I prefer to use my external mic rather than the internal one. First I connected my headphone and mic jacks to the adapter and only after that did I connect it to the laptop combo jack. I also tried vice-versa. It didn't work, regardless of the order. I even tried with a different headset and it still didn't work. What else can I do?
I have also found a thread on Dell forums saying that Headset Buddy doesn't even work on Dell Inspiron 15, model 3521. So since it doesn't work and I'm assuming StarTech doesn't, either, what am I to do/buy?! I am getting extremely frustrated and I'm very disappointed with Dell because the brand should have included with the laptop a proper working adapter for these situations and not make its customers buy an extra accessory to make whatever working gear they already had function. It just doesn't make sense to me! Either make the changes work properly or simply don't touch anything. I spent some of my savings on this laptop which, overall, is great but now I am being forced to spend more on an item to allow me to use my headset. I am running out of options here and even Dell can't seem to tell its customers with 100% certainty what really works for this specific model.
If I can't make the adapter work, I just hope I can return it, otherwise I'll end up with no refund and with a piece of equipment I have no other use for!
Any thoughts?

Hi,
Thanks for your reply.
This is the first time I was forced to buy adapters such as these so I don't know if I'm doing something wrong or if there's anything else I can do to make it work. When I plug the adapter to my Dell, the laptop presents me with several options such as: headphones, headphone, speakers, skull candy headphones, etc (maybe some may have different names but since I see them in Portuguese, I'm not quite sure how they appear for someone who has the computer in English), I have picked different options and it still doesn't work, the only noticeable changes are sound quality related, I guess.

Tv adapter not working since updating ios

since updating my iPad 2 to iOS 8 my tv adapter no longer works, when I plug the adapter in a message comes up stating this device is not supported by apple

Hello jimtallis,
The steps detailed below may help get your TV adapter to function correctly.
Check the compatibility
Make sure the accessory is compatible with your device. If the accessory is on the Apple Online Store, you can see if your iPhone, iPad, or iPod touch model is listed as compatible.
If your accessory uses the 30-pin connector, you might be able to connect it to your device using the Lightning to 30-pin Adapter or Lightning to 30-pin Adapter (0.2 m).
See if your accessory's compatibility is limited. For example, some accessories might not charge iOS devices if they use FireWire instead of USB to charge.
Disconnect and inspect the accessory, then restart your device
Disconnect the accessory and turn it off, if possible.
Inspect the connection between the accessory and device and make sure that no debris or other damage is present.
Restart your iOS device by turning it off, then back on. When the Home screen appears, reconnect the accessory.
Try a different device
Make sure the issue is with the accessory, if possible. Always use an identical or similar, compatible device with the accessory you're troubleshooting.
If there's static coming from the left audio channel when you use headphones, try connecting the headphones to a similar device.
If the device isn't syncing when connected to the dock, connect it directly to the computer using the Apple 30-pin to USB Cable or try another USB port.
If you're using Lightning to 30-pin Adapter in a connection chain, try using the same adapter on a similar or identical device.
Restore iPhone, iPad, or iPod touch
Restore your iOS device. You should rarely need to use this step with an accessory issue. If the issue only affects a third-party accessory, contact the manufacturer before restoring the device.
Resolve issues with iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/TS2634
Cheers,
Allen

CB2530 BT Headphones will not connect to anything!

Help ! Please !
My CB2530 headphones will not now connect to anything, including the adapter supplied to fit into headphone sockets.
None of my BT capable machines (which have all worked fine with them before) can find them as a BT device. The supplied adapter just blinks it's blue light and then auto powers off without making a connection. All the time, the headphone blue light blinks like it is waiting for a connection ....
I notice too that if you switch them on and hold the earpiece which has the red power light, the red light glows more strongly and dims again when you let go. I have tried new batteries and everything else I can think of without success.
Is there something I can try or are my headphones broken? The indicator lights do seem to operating normally but they just never make a connection.

Koyli,
When you connected your Bluetooth device to the headphones were you required to put in a connection code? I am trying to connect to my headphones from a Bluetooth enabled laptop and I am asked for a connection code when the laptop recognizes the headphones as a Bluetooth device. I am working with Creative Customer Support to get the connection code, but I received a reply that the only way the headphones work is with the dongle. Where did you get the connection information requested for the connection?

Ever since installing iCloud and Lion my computer is slow or freezes. The color wheel comes on and My work stops. I have only a small window of time where my computers will function normally during the day. I know many others that have the same problem.

Ever since installing iCloud and Lion my computer is slow or freezes. The color wheel comes on and My work stops. I have only a small window of time where my computers will function normally during the day. I know many others that have the same problem. I'll get 20-30 minutes of work done and then a sync or something comes on, the color wheel of death shows up, and my productivity is shot. I have to shut the computer down the hard way! when it comes back up, it is still either frozen or slow. I've checked in at the genius bar and all they say is that there have been some problems that Apple is trying to fix. It effects Mail, Contacts, Safari, Calendar....yeah, pretty much everything. My iPhone and iPad are not effected as much so I end up doing what I can with them. I've seen the blogs out there and understand that many have the same problem. I have been waiting to read about a fix but I have found nothing! Any ideas?

Not enough free space on the startup disk can slow the system down.
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.
For startup issues... open System Preferences > Users & Groups - Login Items. Delete any apps listed there then restart your mac.
And disable the Lion "resume" feature.
Open System Preferences > General
Deselect: Restore windows when quitting and re-opening apps
And Spotlight may be indexing... you can turn that off > Turning Off Spotlight | Mac Tricks And Tips

"A device attached to the system is not functioning"

Hi!
I'm hoping that all the smart people here can help with my problem. I help support/develop several custom windows application. One of these applications is written in Delphi and there is currently a problem with a feature a single computer owned by a client.The client's computer does have the latest version of adobe installed.
* The user is able to select a document from a data grid, and click a button to view that document (in this case a pdf).
* The document is saved from a database to the user's disk
* Using a shell command, the application asks windows to open that file.
Normally this works quite well, until recently. If this client tries to view a pdf file in this manor windows returns a system error, error 31, and the message "A device attached to the system is not functioning" is displayed. If I naviage to the location where the file was saved to an attemp to open it via double clicking, adobe reader opens the document right up. The application historically has had no problems with pdf's nor any other doucment type. If I change the file assoication from adobe to note pad, the application does open the file with note pad, but it is not readable. If I change it back to adobe reader, the problem persists. I've tried uninstalling adobe, reinstalling, and using a previous version of adobe. Any suggestions would be appreciated.
FYI, before someone tell's me I should be talking to microsoft, I am also inquiring on the windows side of this through msdn. Since I am not 100% sure if this is a windows or adobe reader issue I would appreciate suggestions on both sides.
Last but not least, incase it is of any help, this is the delphi command used to ask windows to open the file:
ShellExecute(GetDesktopWindow, 'open', PChar(TempFile), '', '', SW_SHOWNORMAL);
Any and all help is appreciated.
Thanks!
Louis

Is the computer in question connected to the Internet, and if so, is the Internet connection working correctly?
It is possible that Adobe Reader tries to check for updates when it is launched, then finds a faulty network connection.
Check the Device Manager for non-functioning network devices.
Also try http://fixitcenter.support.microsoft.com/ to find other potential problems on that system.

N8 headphones adapter not functioning normally

Similar Messages

Maybe you are looking for