N8 headset detection problem

When u insert the default headset in N8 that was provided with the box, sometimes it does not detect it as a headset but as a headphone and thus the button of the headset does not work at all.
You have to remove and insert it again and again to get it detected correctly
Trying to wrap people in the cocoon of seamless connectivity during their mobility.

reinsert it or insert it faster.. there 3 rings on the headset jack. where the third is the one for the microphone and making yout mobile phone recognise it as a headset.
So if you insert a bit to slow and it only connects the first 2 rings it will see it as a headset

Similar Messages

Detection problems in IE?

I discovered last night that the Javascript Flash detection
is no longer working in Internet Explorer on either of my
computers. The script cannot recognize that I have Flash installed.
I'm not sure exactly when it quit working, but I went back and
looked at sites I haven't touched in months that WERE working, and
it doesn't work on any of them now. I recently did a Windows update
on both computers so it's possible something happened, but I
haven't been able to find any info online about any issues. If I
disable Flash detection, everything runs fine, so my Flash
component itself seems to work properly.
On this computer, I have Internet Explorer 6.0.2900... and
the Shockwave Flash object lists file Flash9.ocx. I tried updating
to the most recent version of Flash on my laptop and that didn't
fix the detection problems.
I'm using the standard script detection from Flash
Professional 8.0. The problem seems to be with the lines:
set swControl =
CreateObject("ShockwaveFlash.ShockwaveFlash." + CStr(i))
if (IsObject(swControl)) then
The If statement is returning false for every version. Anyone
have any ideas about what could be causing this?
Edit: Ok, if I change the line above to:
set swControl = CreateObject("ShockwaveFlash.ShockwaveFlash")
Then the IsObject() function returns true. And the line below
that:
swVersion = swControl.GetVariable("$version")
seems to return the correct version.
So far, in my testing, this actually seems to work. (Although
I can't be sure if it works on browsers that aren't broken the way
mine seems to be.) So did something happen that suddenly makes IE
not allow you to create the object using the version number? And do
you NEED to use the version number?

Sounds like there may be a problem with your install ..
perhaps you have two
different play version on your PC (eg you've installed a
newer version, but
old one didn't fully uninstall itself).
One possible solution (if that is the case) is to run the
uninstall utility
from Adobe, then search your harddrive for any files matching
*flash*.ocx ..
and if they are actually flash players (look at properties
version info tab
to ensure they are macromedia/adobe flash player ocx's -
don't want to kill
something to do with flash memory (say)) then delete them.
Also kill off
the c:\windows\system\macromed\flash folder .. so then you
have no flash
player ocx left. Then go to the Adobe web site and
re-download/install the
latest Flash Player. NOTE: if you do this, be very careful
you only delete
things that can safely be deleted without causing problems
elsewhere.
Jeckyl

Installer failed to initialize.this could be due to missing file.please download adobe support adviser to detect problem.

getting the message while installing cs 6 trial
-installer failed to initialize.this could be due to missing file.please download adobe support adviser to detect problem.
please help

Error "Installer Failed to Initialize" | Install desktop application | Windows

Windows 7 detects problem with iPod shuffle and after troubleshooting say it can't fix and disconnects it. What's up?

Windows 7 detects problem with iPod shuffle and after troubleshooting say it can't fix and disconnects it. What's up?

You might get some help over on the shuffle discussions.
http://discussions.apple.com/forum.jspa?forumID=822

HP H8000 Wireless Headset Dongle problem

HP H8000 Wireless Headset Dongle problem
The dongle has stopped working, the blue light which it has generally does not show up anymore.
Eventually the headset is nolonger useful without the dongle working..
Pls help how do I fix this or get a new dongle....

Victor,
Please use this form instead. Let us know if you are still having problems writing in.

Having Windows & iPods detection problems?

Try Microsoft article below - has to do with iPod detection problem. Try This...
http://support.microsoft.com/kb/925196

Sounds like there may be a problem with your install ..
perhaps you have two
different play version on your PC (eg you've installed a
newer version, but
old one didn't fully uninstall itself).
One possible solution (if that is the case) is to run the
uninstall utility
from Adobe, then search your harddrive for any files matching
*flash*.ocx ..
and if they are actually flash players (look at properties
version info tab
to ensure they are macromedia/adobe flash player ocx's -
don't want to kill
something to do with flash memory (say)) then delete them.
Also kill off
the c:\windows\system\macromed\flash folder .. so then you
have no flash
player ocx left. Then go to the Adobe web site and
re-download/install the
latest Flash Player. NOTE: if you do this, be very careful
you only delete
things that can safely be deleted without causing problems
elsewhere.
Jeckyl

My Book 3.0 (1TB, USB 3.0) detection problem with Envy Phoenix 810-135qe

I have a My Book 3.0 (1TB, USB 3.0)... The older My Book not the newer one... "My Book Essential" or something like that.
I was using it with W7 x64 backup utility on an older HP desktop (HP Pavilion a6560t) without issue up to the day my new HP Envy 810-135qe arrived. I downloaded the latest drivers from WD support, and the thing PnPed fine off the non-powered USB 3.0 on the back of the 810. However, the 810 drops connection after sleep, hibernation, lock, or simply just over time. I've run diagnostics on the WD and the cables, all checked out fine. I tried shutting off power saving to the USB 3.0s in device manager (just a guess), and that seemed to work for a few weeks, however I'm still having the detection issue periodically. All of my drivers are up to date on the HP side. I'm fully reformatting the WD now to see if that might somehow fix the issue (I'll update in a few days on how that worked out).
Anyone have any idea what's amiss? I suspect something with the BIOS. HP chat support has been no help (they go through the same checks I've already done myself) and they got really spooky on another chat when I asked about adding a SSD as the boot drive (I knew it was an issue from here and other forums).... Handed me off to second tier support, and all they would tell me is that they couldn't tell me anything... Basically, no support for any config except for how it was shipped because it's a "custom build" (yes, buyer's regret big time).
Secondly, anyone running a similar config with a en external back up that's running smoothly? My WD is getting old so I was thinking of one of the newer portable USB 3.0 HDDs (both 2.5 and 3.5). My specs follow.
HP Envy 810qe - Win 7 (810-135qe)
Product number: F9A63AV#ABA
Windows 7 Home Premium 64
4th Generation Intel(R) Core(TM) i7-4770K processor quad-core [3.5GHz, 8MB Shared Cache]
4GB Nvidia GeForce GT640 [DVI,DP,HDMI & VGA via adapter]
12GB DDR3-1600MHz [2 DIMMs]
2TB 7200 RPM SATA Hard Drive
16GB mSATA SSD Cache
Microsoft Office Trial
Security software trial
Blu-ray Reader & SuperMulti DVD burner
15-in-1 Multi-slot Media Card Reader, 4 USB Ports (Front/Top), Audio [Front 2USB2.0, Top 2USB3.0]
No TV Tuner Card
Integrated Sound, Envy Audio; Beats Audio
HP USB keyboard and optical mouse
HP Wireless 802.11 a/g/n with Bluetooth(R)(2x2)
HP Home & Home Office Store in-box envelope
This question was solved.
View Solution.

Anglogator, welcome to the forum.
I have the exact computer (See my signature below.). I have installed a Samsung EVO 840 500 GB SSD. It works absolutely great. Samsung SSD's seem to be the only brand that boots without changing any settings in the UEFI Firmware. If you decide to buy one, I will be glad to walk you through the installation process.
I also have a "WD My Book Essentials" 2 GB external hard drive. It works perfectly without making any changes to the BIOS.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Hard drive detection problem - PLEASE HELP!!!!

I'm about at my wits end with this problem. One of my drives crashed over the weekend, and since then the replacement drive never gets detected. When I have the second drive installed, my computer never gets past the "Verifying DMI Pool Data", then says disk boot failure. When I take out the second drive, my computer boots fine. I've tried different jumper settings, thinking maybe i looked at the diagram backwards, disconnecting my DVD drive and putting the hard disk on the secondary IDE, and installing the new drive as the master and installing Windows on it, with the old drive as the slave. Nothing has worked. As soon as I connect a second hard drive, I get a disk boot failure. I've checked the boot priority a hundred times, and it's correct. In case it was a power supply problem, I removed everything except the two hard drives and some RAM, and that didn't fix anything. I'm lost as to where to go from here. My computer works fine without the second drive, but I need the second drive for gaming.
I'm now thinking it may be the motherboard, because a couple things have happened over the last month. First, all of a sudden I got a CMOS checksum error, then about a week and a half ago the onboard NIC died. And when I installed the updated drivers and flashed the BIOS, on restart I received an error message saying something was wrong with the overclocking settings and had been reset to the default values. The problem with that is I never overclock anything.
I'm not even sure the old drive actually crashed anymore. I heard clicking coming from the computer, and when I all of a sudden lost access to the drive, I assumed it crashed. But now that I am unable to get the brand new drive to work, I'm thinking I need to get a new motherboard. I'm trying to avoid that as long as I can though because this one is only 5 months old.
Would a possible solution be to just leave the master on IDE, and buy a SATA drive to use as a second disk? Or does mixing IDE and SATA cause issues?
Thanks for any help anybody may be able to offer.
Anyway, here are my system specs:
K8N Neo4 motherboard
Athlon64 3200+
2.5 GB RAM - 3x 512 and 1x 1GB stick
Boot disk - Western Digital 120GB ATA 100 IDE
Old Slave - Seagate 60GB ATA 100 IDE
New Slave - Western Digital 120GB ATA 100 IDE
NIC - Linksys 10/100
DVD-RW - Mad Dog Multimedia
DVD-ROM - Sony
Graphics - GeForce 7800GTX
Sound - Mad Dog Entertainer 7.1
Power Supply - 420W

Quote
putting the hard disk on the secondary IDE, and installing the new drive as the master and installing Windows on it, with the old drive as the slave.
Does the 2nd HD work then, were you able to boot up and install Windows?
Does BIOS detect it?
Have you tried a new IDE cable?
Make sure that all the pins are properly in and not loose in the molex connector to the HD.
Have you tried using the new drive alone on IDE-1 or 2?
Have you tried clearing CMOS? remove P/S AC cord, press case power button a few times to drain remaining power then clearing CMOS buy way of the jumper.
Quote
I'm trying to avoid that as long as I can though because this one is only 5 months old
Did you buy this MB new?
If so you could RMA it.

ITunes cannot run because it has detected problem with audio configuration

Hello! I am currently in a russ with my iTunes. When I try to open it, it gives me the message:
iTunes cannot run because it has detected a problem with your audio configuration.
I'm not sure what this means. I haven't changed any settings on my computer since the last time iTunes ran. Is there anyone that can help me? Thank you!

I am also having the same problem. I have followed the procedures on the link page numerous times. It will work and I think I have fixed the problem and then it the problem starts again. I have uninstalled/reinstalled itunes and quick time, reverted to an earlier version of itunes, etc all to no avail.

Byte Corseca headset - Charging problem

Hi,
I am using byte Corseca bluetooth headset for more than one year. Last 2 months back i got an issue in charging the headset. When i connect the headset to power source (USB Charging) usually i will show the red light glowing constantly. But now it starts blink with in 2-5 sec after i connect it to the power source.
I am looking for the solution and the service center or any source of help for this but i failed.
Kindly let me know what should i do now.
Thanks
Murali krishna

Hi,
Sorry you're having problems with those headphones. When you say that you're connecting them to a USB charging power source, does that mean you're plugging the USB cable into your computer? Or is that USB cable connected to a power outlet?
You also said it's been happening for 2 months. Are the headphones still charging, and if so, are you able to use the headphones?
I would recommend trying a couple different things. First, if you're plugging those headphones into a computer to charge, try plugging the USB (with adapter) into a wall outlet to see if that affects the charging ability.
Next, I would recommend removing those bluetooth headphones from Windows, then try to pair them up again and see if that helps at all.
Unfortunately, from what I can see those headphones are pretty much considered "plug and play". I could not find any documentation on troubleshooting that particular make and model. I'll keep looking and ask around to see if anyone else has any suggestions that we can try.
Todd

Detected problem with the audio configuration

Hi guys, can anyone help me with this problem?
i really have no idea how this error occured. Coz i didnt do anything with the audio configuration.
I worked well before i updated the iTunes.
The error is:
"The iTunes cannot run because it has detected a problem with your audio configuration"
Thanks...

Have you had a chance to look at this troubleshooting page? It may be of some help: iTunes 7 for Windows: iTunes has detected an audio configuration problem

Application Files. Detect problems

I detected a slight problem in file manager. When I access photos on Lumia he shares to email, ONE Drive, why not with the software files? Contents of Where Drive share for software files. Have Lumia Black WP 8.1, how should I proceed?
I have a picture on my cell phone, I want to change her location within the cell. Windows makes me carry this phone for ONE drive and yes where drive compartment fires the files, IE up load and unnecessary download.
Poquet File Manager is the name of the application. I believe Microsoft should rely on this apo, to improve the files cannot be in version 1.0
alencarsv

Hi, alencarsv. We appreciate your insights on our products and services. For us to better address your concern, what's your phone's model? Just to clarify, you're using the developer preview OS on your phone, correct? It is the normal behavior of the phone to share your pictures to either of the following options: Social Networking accounts, email accounts, and to your OneDrive.
What do you mean by 'it is not effective'? Keep us posted.

Bluetooth headset pairing problem

I got E71-1 (11) firmware version 210.21.006 device and i also got this bluetooth headset HBH-PV720 http://www.sonyericsson.com/cws/products/accessories/overview/hbh-pv720
And i can't pair the phone with the bluetooth headset
Does E71 support this Headset? Or i am doing something wrong?
Type the name of a command and press enter to execute it, or help for assistance.

many have talked about its need, I dont know when a software update will enable this
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Pulse Audio jack detection problem.

Hi, In my work I use headphones for listening musing and if I shutdown the laptop and then remove the headphones and when I start it in home there is no sound. I found the solution: plug headphones and unplug them. For me Pulse audio does not make check on system start if there are headphones connected but uses last value, and only changes it on plug and unplug.
Is there are script that I can add to systemd on startup to check jack for headphones?
Thanks.

Hello,
since one recent update in January 2014 I notice the same Problem as Indomitable reported.
I am using Archlinux on my Lenovo X201 (KDE and Pulseaudio installed). After reboot I hear no sound from the internal speakers. As Indomitable sayed, plugging and unplugging some headphones fixes the problem until next reboot. (First I was afraid of a damaged jack causing a false detection - so I am now eased up that somebody else reports this behaviour, too.)
As a quick workaround in KDE (when you have no Sound through internal speakers and no Headphones laying around) you can go to [Audio & Video settings > Audio Hardware Setup > Device Configuration] and choose the Connector: "Speakers" instead of "Analog Output".
Of course this is no permanent solution since this bypasses the automatic jack detection.
Is this strange behaviour a bug or just a misconfiguration?
Last edited by pforcht (2014-01-27 09:47:09)

Solaris 8 x86 w/ Seagate 410800N Drive - Size Detection Problem

I have a Dual PII-300Mhz computer w/ 786MB memory and a 4.5GB Wide Scsi (Seagate) and an 8.1GB Narrow Scsi (Seagate - 410800N) configuration.
I have installed Solaris 8 x86 and applied the "recommended patches". The system is working great EXCEPT for when I attempt to format the ST410800N hard drive.
The # of cylinders is suppose to be 4925, heads 27, sectors per track 133, etc...
Solaris is detecting only ~467 cylinders and 26 heads. I've tried to change the "TYPE" to one that I created and it seems to work for a few menu selections, but then when I try to partition the drive, it shows only ~467-470 cylinders. It shows 9 slices and only allows me modify up to #7. The SCSI ID for the drive is 4, which I'm not sure if this is something that Solaris is reserving for a Tape drive. I can change it to 1 or 2.
Any advice would be greatly appreciated. I am new to using Solaris, but I'm enjoying it alot. I just would like to get this drive partitioned so that I can move "home" and to install Oracle 8.x
Thanks,
George

Thanks for all of the helpful responses. I figured out the problem.

N8 headset detection problem

Similar Messages

Maybe you are looking for