N8 Home screen - how to get multiple buttons in a ...

Hi,
Nokia N8 home screen comes with two rows having 4 widgets / items each.
I deleted the second row by mistake (which included Phone set up, messaging etc)
I can't get it back now. When I try, I can only get one widget in a complete field (instead of 4).
Can someone help me, how to get this row back?
Thanks,
Kaps
Solved!
Go to Solution.

Options>Edit Content>tap screenand select add content>select Shortcut 1/2 . Once shortcut widget is added, tap and select settings and simply add the shortcuts you want in thet widget then select exit and then Done on the main screen.
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution' 

Similar Messages

  • The red, green and yellow buttons in the upper left corner of the screen disappear whenever I open Safari.  I cannot minimize the Safari window which I often need to do if I am coordinating multiple windows.  Does anyone know how to get those buttons back

    The red, green and yellow buttons in the upper left corner of the screen disappear whenever I open Safari.  I cannot minimize the Safari window which I often need to do if I am coordinating multiple windows between different applications.  Does anyone know how to get those buttons back?  I guess I could just switch betwen appliations, but I am used to doing it the other way.

    You're welcome 
    You had Safari in full screen mode.

  • I just got an iphone 5c and there is no notifications on my home screen when i get a text message. i have to phsyically open up my messages to see if i have a message. how do i change this so i can see on my home screen when i have a text message?

    i just got an iphone 5c and there is no notifications on my home screen when i get a text message. i have to phsyically open up my messages to see if i have a message. how do i change this so i can see on my home screen when i have a text message?

    What do you have set for messages in Notifications?

  • Hey guyz my ipod touch 4g is not green battery symbol while charging or syncing on home screen nor it get charge?? plz give me some suggestion

    hey guyz my ipod touch 4g is not green battery symbol while charging or syncing on home screen nor it get charge?? plz give me some suggestion

    no buddy,  when my i pod touch 4 is off  i press its power button then it display a black screen in which there is an empty battery with red marking in side   an,,
    when i connect it with usb cable which i got with i pod touch....then itlike this in picture.. but after some time it get start to home screen with 20 % battery ..and no charging take place and no syncing take ....nor i tunes find it

  • How to get multiple selected fields in list

    Hello all,
    I am trying to get multiple selected value from a list but i dont know how to get multiple selected fields from a list though AS3.
    Actually i want to pass the selected fields to php, so for that i need to get the selections and send to php.
    Thankx..

    i want to put the selected fields of list in an array through AS3....
    actually......i figured it out how to do that...........
    Its simple......use
    list.selectedItems[index]
    and to get the number of items selected......
    list.selectedItems.length
    simple.....

  • How to get multiple records using fn-bea:execute-sql()

    Hi,
    I created Proxy service(ALSB3.0) to get records from DB table. I have used Xquery function(fn-bea:execute-sql()). Using simple SQL query I got single record, but my table having multiple records. Please suggest how to get multiple records using fn-bea:execute-sql() and how to assign them in ALSB variable.
    Regards,
    Nagaraju
    Edited by: user10373980 on Sep 29, 2008 6:11 AM

    Hi,
    Am facing the same issue stated above that I couldnt get all the records in the table that am querying in the Proxyservice.
    For example:
    fn-bea:execute-sql('EsbDataSource', 'student', 'select Name from StudentList' ) is the query that am using to fetch the records from the table called StudentList which contains more than one records like
    Id Name
    01 XXX
    02 YYY
    03 ZZZ
    I tried to assign the result of the above query in a variable and while trying to log the variable, I can see the below
    <student>
    <Name>XXX</Name>
    </student>
    I want to have all the records from my table in xml format but it's not coming up. I get the value only from the first row of my table.
    Please suggest.
    regards,
    Venkat

  • My ipod touch died in the middle of a upgrade and now it wont come back on. When I charge it, it just goes to the apple but not the home screen. how do i fix it

    my ipod touch died in the middle of a upgrade and now it wont come back on. When I charge it, it just goes to the apple but not the home screen. how do i fix it

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • How to add multiple button/choices in  button choice

    HI all ,
            How to add multiple button/choices in  button choice ?

    Initialize a cluster array (CrsrList type) with as many cursors as you think you would ever need.   Setup your cursors dynamically, then delete the unused cursors (array elements) and then update your CursorList property.
    Message Edited by vt92 on 03-20-2009 04:04 PM
    "There is a God shaped vacuum in the heart of every man which cannot be filled by any created thing, but only by God, the Creator, made known through Jesus." - Blaise Pascal
    Attachments:
    cursors.PNG ‏5 KB

  • Im trying to make a poster size collage of pictures and also want to put a story in the middle of the poster. I just can't understand how to get multiple pictures and how to arrange them around the poster?

    Im trying to make a postersize picture collage and I don't know how to get multiple pictues arranged. Someone said I can use the layer option. But Im just not getting it. Please help!

    Click File >> Open and select all of your photos
    That will add them to the project bin
    Then select File >> New >> Blank File
    Select background color White (or whatever you prefer) and add your width and height for your final image (set resolution 72 for web usage or 240 to 300 for printing) then click OK
    In the project bin click your first photo and drag it up into the main window on top of your new background.
    Click on the move tool and click in the center of the photo and drag to arrange it where you want on the background - you can hold down the shift key to maintain original proportions whilst dragging the corner handles of the bounding box to get the size you want.
    Do the same with the next photo (drag it up into the main window) and use the move tool to position it. Then continue with each image.
    Finally Click Layer >>Flatten image and save as jpeg. (Save as PSD if you want to preserve the layers for editing again)
    N.B. as you add images they get dropped in the center. So you need to use the move tool to drag them apart. Click in the middle of one and move it around, and then the others until you get them positioned as you want.
    When you click again with the move tool a bounding box appears around the image and you can drag out the corner handles to re-size your photos. Hold down the shift key when dragging the corner handle and that will maintain the proportions of the original.
    Finally click Layer >>Flatten Image and save your collage - you may then want to use the crop tool to cut away any surplus white canvas, and then re-save. Click the T tool to add text.

  • How to get multiple beep sound?

    Hi
    I want to get multiple beep sounds as output if a comparison condition gives output as true.
    Can anyone tell me how to get multiple beep sound?
    Solved!
    Go to Solution.

    You could make it more pleasant if you would play a different sound file based on the comparison. (look in the windows\media folder for the sounds used by the OS. Try e.g. c:\windows\media\tada.wav)
    Very few people still communicate in morse code.
    LabVIEW Champion . Do more with less code and in less time .

  • How to get Multiple FLV duration?

    How to get Multiple FLV duration in single shot?.  Am using Netstream concept.

    I have more flv files and taking it via XML. I want to play the multiple flv video in single timeline. For that i need duration of multiple flv in for loop. Is it possible to take without metadata?

  • After updating my i phone to the latest ios 7.0 software the apps I purchased are still accessible through the app store but not on the home screen how do i get them back

    After updating my iphone 4s to the latest ios version 7 the apps that i purchased are no longer on the home screen and can only be found on the app store.. how can i get them back on the home screen? please help

    You can move apps around in iOS 7 the same as iOS 6. Press an app icon until you see it wiggle; then drag it to where ever you want it to be. Drag it onto another app to create a folder with the two apps. Tap the Home button to stop the wiggle.

  • How to get multiple values from the list

    I've a list of an item which I queried it from the database. I also created a button that will takes a selected items from the list when it was clicked. I used javabean to get the data from database.
    <%     // clicked on Select District Button
    Vector vselectedDistrict = new Vector();
    Vector vdistrictID = new Vector();
    String tmpSelectDistrict = "";
    tmpSelectDistrict = request.getParameter("bSelectDistrict");
    if(tmpSelectDistrict != null)
         // get multiple values from the list
         String[] selectedDistrict = request.getParameterValues("usrTDistrict");
         vselectedDistrict.clear();
         vdistrictID.clear();
         if((selectedDistrict != null) && (selectedDistrict.length != 0))
                             for(int i=0;i<selectedDistrict.length;i++)
                   vselectedDistrict.addElement(selectedDistrict);           
              vdistrictID = dbaseInfo.getcurrentDistrictID(nstate,vselectedDistrict);
              for(int i=0;i<vdistrictID.size();i++)
                   out.println("district = " + selectedDistrict[i]);                         out.println("district ID= " + vdistrictID.get(i).toString());
    %>
    // get vdistrict from the database here......
    <select name="usrTDistrict" size="5" multiple>
    <%     for(int i = 0; i< vdistrict.size(); i++)
    %>
         <option value="<%=vdistrict.get(i).toString()%>"><%=vdistrict.get(i).toString()%></option>
    <%
    %>          
    </select>
    <input type="submit" name="bSelectDistrict" value="Select District">
    Lets say the item that i selected from the list is 'Xplace' and I clicked on the Select District button,
    what I got is this error message:
    org.apache.jasper.JasperException: Unable to convert string 'Xplace' to class java.util.Vector for attribute usrTDistrict: java.lang.IllegalArgumentException: Property Editor not registered with the PropertyEditorManager
    So where is going wrong and what the message means?. Any help very much appreciated. Thanks

    These are just guesses that might hopefully steer you in directions you haven't looked in yet.
    I presume you used triangle brackets (< >) to avoid having the Jive Forum think it was the "italics" tag?
    Are you certain this: dbaseInfo.getcurrentDistrictID(nstate,vselectedDistrict);
    expects a Vector as its second parameter? And returns a Vector?
    I don't believe you've shown how you use the javabean, or its code? Perhaps it should be rewritten to accept an array of strings instead of a Vector?

  • How to get multiple records from internal table through BDC

    PERFORM DYNPRO USING:
      'X'  'SAPMM61L'  '0500',
      ' '  'BDC_OKCODE'  '=NEWC',
      'X'  'SAPMM61L'  '0500',
      ' '  'BDC_CURSOR'  'PLPTU-PLWRK(01)',
      ' '  'BDC_OKCODE'  '=TAKE',
      ' '  'PLPTU-PLWRK(01)' '2531'. (2531 is a plant)
    This is the recording used to get plant via BDC of MS31.
    Using this code i can get only single plant...
    If i want to get multiple plants from an internal table,how i can change this code?
    Since it is a recording i cant put this code in LOOP..ENDLOOP.
    Suggest any method for doing this....
    Awaiting for ur reply...

    Hi,
    While recording also record the scroll down button.
    The you can place different plant in the BDC using loop and endloop
    Regards
    Arun

  • Iphone 6 stuck on home screen. can't get to swipe bar to swipe

    New iphone 6 is stuck on the home screen. Unable to get to the swipe bar to swipe it. I have restarted it and it always come back to en extra large home screen picture. Phone rings, but unable to answer phone.

    Hello hammergator,
    Thanks for using Apple Support Communities.
    If your iPhone is unresponsive but you are able to restart it, then I'd like you to try resetting it next.
    To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    Take care,
    Alex H.

Maybe you are looking for