N8: How to assign custom SMS tone while keeping it...

The task is pretty much outlined in the topic title, but I'll still elaborate:
I want to assign Knock.aac (just a renamed Message 2.aac from my old N73) as a message tone, while keeping it hidden from the music library.
Hiding it is simple: I just put it to E:\Sounds\Simple and the library cannot see it. But what about assigning it as default tone for messages? When I open it via music player, the only option is to use it as the main ringtone, which is not what I want. When I open the Profile customisation screen and try to find it from there, it's simply nowhere to be found.
The only workaround I was able to find is putting it in E:\Sounds\Recordings as a .WAV file. This way it can be assigned as a Sound Clip. But I'd like to keep it .AAC or .MP3, and that's not possible in this workaround, because Sound Clips have to be .WAV, otherwise they can't be seen in the list.
Any ideas how to achieve this task in a civilized way?
Solved!
Go to Solution.

move it back to your gallery,then go to profiles and use the tone then move it back?
If  i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

  • How To Assign Special sms Tone For Special Contact

    Hi
    i have nokia N70 , is there any way to assign special sms tone for special contact ?
    Solved!
    Go to Solution.

    Unfortunately not.

  • How to assign  custom rdf report as  stylesheet PO communicator

    R12 :How to assign custom rdf report as stylesheet PO communicator

    Are you trying to have the table where the lines are always be the same size no matter how many lines are present?
    If so, you some choices:
    1) If your lines are always the same height, you might get some ideas on what to do from this article:
    http://oracle.anilpassi.com/xml-publisher-developing-reports-printed-on-pre-printed-stationary.html
    2) If your lines vary in height, then you should look into a PDF template. This will give you a pre-printed stationary look in which the drawing of boxes and lines is not affected by the data content.
    3) Other less attractive options are a) making the report in XSL-FO, and b) making a bitmapped RDF report
    There is currently no solution that I am aware of for a pre-printed stationary look using an RTF template in which the data lines are of variable height.

  • Now I can't figure out how to assign the new tones to my contacts

    I used the option "buy more" under ringtones on my iphone 5S.  Now I can't figure out how to assign the new tones to my contacts. Help please!

    Hello p618cg,
    Congratulations on your new iPhone 5s!  You can follow these steps to assign a ringtone to a contact:
    Set a special ringtone for a contact.
    In Contacts, choose a contact, tap Edit, then tap Ringtone. Select the ringtone you'd like to hear when that person calls.
    iPhone Basics - Set a special ringtone for a contact
    http://support.apple.com/kb/TI16
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • How to assign custom table entries to request

    Hi,
    I have around 4000+ entries in Z* table(Customized data).
    Now i have to transport to QA system by assigning request no.
    How to assign the above all entries to the request.
    Thanks
    ~KER

    Hi Ramesh,
    That you can do it if you select
    Recording routine  as <u>Standard recording routine</u>       under table maintainance generator.
    But in my case the table has been created with <u>no,or user,recording routine</u>  option and updated all records in dev system.
    So its not possible  at this point of time.
    Thank you
    ~KER

  • Is there additional ring tones? or How to make custom ring tones?

    Hi,
    I am thinking about adding additional ring tones.
    Is there any site I can download the ringtones for cisco 7940, 7960, 7940G, 7960G?
    or
    Can I make custom ring tones by myself?
    If there is an application to do the ring tones, pls anyone let me know?
    thanks

    Hi San,
    Just to add a note to the great tips from Ingo and Bethany (+5 points each folks for your nice work here :)
    Here we go :)
    PCM File Requirements for Custom Ring Types
    The PCM files for the rings must meet the following requirements for proper playback on Cisco Unified IP Phones:
    •Raw PCM (no header)
    •8000 samples per second
    •8 bits per sample
    •uLaw compression
    •Maximum ring size-16080 samples
    •Minimum ring size-240 samples
    •Number of samples in the ring is evenly divisible by 240.
    •Ring starts and ends at the zero crossing.
    •To create PCM files for custom phone rings, you can use any standard audio editing packages that support these file format requirements.
    Configuring a Custom Phone Ring
    To create custom phone rings for the Cisco Unified IP Phone 7965G and 7945G, follow these steps:
    Procedure
    Step 1 Create a PCM file for each custom ring (one ring per file). Ensure the PCM files comply with the format guidelines that are listed in the "PCM File Requirements for Custom Ring Types" section.
    Step 2 Upload the new PCM files that you created to the Cisco TFTP server for each Cisco Unified Communications Manager in your cluster. For more information, see the "Software Upgrades" chapter in Cisco Unified Communications Operating System Administration Guide.
    Step 3 Use a text editor to edit the Ringlist.xml file. See the "Ringlist.xml File Format Requirements" section for information about how to format this file and for a sample Ringlist.xml file.
    Step 4 Save your modifications and close the Ringlist.xml file.
    Step 5 To cache the new Ringlist.xml file, stop and start the TFTP service by using Cisco Unified Serviceability or disable and re-enable the "Enable Caching of Constant and Bin Files at Startup" TFTP service parameter (located in the Advanced Service Parameters).
    http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7965g_7945g/6_1/english/administration/guide/7965cst.html#wp1097651
    There is a nice little Step by Step here;
    http://www.globalknowledge.com/training/whitepaperdetail.asp?pageid=502&wpid=473&country=United+States
    Or search sites like this one;
    http://www.adman.net/cisco/ringtones/browse.asp
    Hope this helps!
    Rob
    PS: Interesting tunes from your link Bethany, I'd love to hear "Scar Tissue" as a ringtone, pretty cool :)

  • How do I stop SMS tones from interrupting my call?

    When I'm on a call ifi get an email or a text message the alert that I have assigned to it interrupts while I'm on the phone and I can't hear the person I'm talking to

    Flipping sthe witch isn't the proper fix. Ever forget to flip the switch back after the call & lay the phone down & then find out later that you missed calls & texts?  Plus, when the phone is in a case, hard to flip the switch.  Then even harder if your wearing gloves & you are using your nose to swipe across to answer the phone.  Only way to get it fixed, is to write apple & make the suggestion to fix it.
    I do not recall any of the other iprevious OS versions having this problem until the most recent one.
    There's no phone setting to silence alerts during phone calls.  You can suggest this to Apple: http://www.apple.com/feedback/iphone.html

  • How to assign a ring tone to a n97 mini on your co...

    dear everyone
    i am having problems assigning a ring tone to my wifes contact can anyone help?

    Hi clarkpostie,
    if you select your wife's contact, select options and edit.  scroll down and you should see a detail named 'ringing tone'.  Select this and it should then display the folders you have music in.  From here pick the folder and tune you would like to associate with your wife and select 'done'.
    Hope this helps.

  • How do I install Snow Leopard while keeping files, applications, and settings

    I need to update my system, I realized that I need Snow Leopard (quiet late) before Maverick. My question is, how can I install it keeping files and all the data. I found this on Internet, does it work?
    Install Snow Leopard while keeping files, applications, and settings
    If you follow these steps, the installer will replace your operating system if one is already present, but will preserve your account information and personal files.  You may have to reinstall some applications, however.
    Insert the install disc (or the first install disc if you have more than one) into your disc drive. Restart your computer while holding down the c key. This causes your computer to start up from the install disc rather than your hard drive. When you see the gray Apple insignia, release c . 
    The Mac OS X installer should open automatically. Follow the on-screen prompts to read and accept the license agreement and begin the installation. When prompted to choose a destination disk, select your preferred location and click Install. 
    When the Mac OS X installation finishes with the disc, restart your computer. After the installation completes, a configuration program may begin automatically if you are installing for the first time. You will need to supply basic setup information for your computer. 
    Update your system software to ensure that you have the most recent operating system components.  From the Apple menu, select Software Update... , and then follow the instructions on the screen. Often, you will have to restart your computer, and you may have to run Software Update multiple times before it can completely update your system.

    That's why you need to back it up. You won't need to restore the backup immediately afterwards unless something goes wrong during the upgrade, but you'll need it later; the drive will eventually fail.
    (105428)

  • How to Assign Customized Form for Vendor Balance Confirmation - F.18

    Dear All,
    While executing the transaction code f.18. System is showing vendor balances with IDES logo. I want to assign the customized form. Can anybody tell me where to assign form fro F.18.
    Regards
    Sreenivas

    kindly check in the configuration
    SPRO-Financial Accounting-Accounts Receivable and Accounts Payable-Business Transactions-Closing-Count-Balance Confirmation Correspondence-Make and Check Settings for Correspondence-Define Form Names for Correspondence Print
    Select the program "SAPF130K" which one is for balance confirmation. against this the form is attached

  • How to Assign Customized BADI to Standard T.Code  Example ME51N

    Dear all,
    It would be really appriciate if you provide me a solutions.
    I have Created Customized BADI using SE18,SE19. But I am not aware How to Use those BADI in Standard Transaction.
    Example : I have Created PR Related BADI (ZPURREQ_ACC_CHK). How to utilize this BADI In ME51N,ME52N.
    Please advice me.
    Thanks
    Best Regards,
    KSK

    I think what you need to do is find what exits or existing BAdIs are available for the transaction.  Then in the user exit you can call your customized code.  That way you avoid changing SAP's code for the transaction.  You can find BAdIs related to purchasing by going to transaction SPRO and then following this path:
    Materials Management -> Purchasing -> Business Add-Ins for Purchasing
    I hope this helps.
    - April King

  • How to assign custom tab field value to corresponding standard tab field value.

    Dear friends,
                         I want  assign a field value ( advice code , advice code description ) in a custom tab  to corresponding field value in standard tab (advcode ,).   in me51n. 
    following screen shot are given below

    Hi SK,
    It looks both the tabs are custom ones. In that case, you can either use Export/Import statement or you can use Set/Get Parameter ID for  setting value.
    If one is standard subscreen, you can export value from custom subscreen and use line item level user-ext/enhancement to assign the value on standard subscreen.
    Hope this helps.
    Regards,
    Naveen

  • How to Assign Custom Search Help to the standard tcode ME53N.

    Hi All,
    Can any help me  out.
    I have created a custom Collective Search ZH_T023_MEPO, I want it to be assigned it to the Tcode ME53N. Replacing the standard one H_T023_MEPO. and i also need to restrict it for only one Plant for other Plantu2019s  standard search help H_T023_MEPO should work as usual

    Hello
    The search help in the item overview (of the purchase order) is H_T023_MEPO whereas in the item details section (tabstrip Material Data ) it is H_T023.
    Thus, there would be at least two search helps that you need to change or modify.
    I would suggest a different approach assuming that your requirement is to restrict the search help under certain conditions (e.g. plant). Implement the BAdI ME_PROCESS_PO_CUST and implement two methods:
    PROCESS_ITEM = check material group of item and invalidate if required
    (IF_PURCHASE_ORDER_ITEM_MM~INVALIDATE)
    CHECK = closing check of entire PO (in case of invalid material groups return CH_FAILED = 'X'
    Regards
      Uwe

  • Adobe Captivate 8 - How to Assign Custom Shortcut Key

    I want to switch between the Film Strip view and the Master Slide view quickly. To show/hide the Film Strip there is a default shortcut key CTRL+ALT+B. For the Master Slide there is none.
    Is there a way to assign a custom shortcut key to toggle Master Slide view?

    I wonder why the lack of support for custom shortcuts keys does NOT surprise me. In overall, shortcut keys are typical and always required in expert applications.
    Anyway, thanks for the tip. I noticed that keeping a number of panels ON slows down the performance so toggling between them ad-hoc might mitigate users frustration.
    Again...fruit for thought.

  • How to assign Customizing Req to a customizing table ?

    Hello All,
    I've created a table with Delivery Class as C and some fields.
    Now when I save this it is asking a Workbench request.
    How shud I put them in a Cutomizing request ?
    Regards,
    Deepu.K

    Hello Deepu
    Customizing tables are, like all other tables, workbench objects and therefore will be transported using a workbench request.
    Since the delivery class of your table is 'C' (= Customizing) the entries inserted into this table will be transported
    - in a customizing request if the entries are client-dependent
    - in a workbench request if the entries are client-independent
    Regards
      Uwe

Maybe you are looking for