N8 loosing signal - What to do?

Heya everyone!
Yea, as some other people have written in here, then the N8 can loose the signal to your provider.
Now I have tried: Updating my N8, got a new sim-card and I have just talked to the place where I bought it, and they now wanna send it in.
But it's funny, cause I have had the phone for almost a year now, and it has just begun to occur 1 month ago.
It's when I hold my hand over the bottom of the phone, and when I touch the bottom. Now my question to you is:
Should I let them send my phone in, wait multiple weeks and then get it back, with a hope of it being fixed. Or should I just try to change to a new provider, with a hope of that provider having a better signal area where I live?
It should be said that I tried to hold the phone in the way so it "messes" up when I were @ the place I bought it, but it would not loose signal out there, which also tells me that it might be a combination of **bleep** connection, and a phone which is a bit bad @ keeping the connection.
It should also be said that I have full signal when it's just lying here next to me, but when I touch it, it's going right down to zero..
Hope someone can help me, advise or perhaps a solution ??
Thx, yours faithfully, Shadowjens

@shadowjens
Is result the same irrespective of whether "Power saving mode" enabled as in this case it defaults to GSM rather than 'Dual"?
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

  • My 5s keeps loosing signal , 02 say it the latest update on ios 7 causing this  , is this true and what's happening about it plz ?

    My iPhone 5s keeps loosing signal , I have contacted 02 , and they say it's to do with the latest ios 7 update , my messages and voice mail doesn't come through for a day or two after they are sent or left , this shouldn't be happening to a phone that is only a few months old !

    Think about it.  If it were truly the iOS update, EVERYONE who has updated (and that's millions and millions of users) would be having problems.  It would be front page news.
    Get a replacement SIM from O2 and see if this improves the situation.  If not, then basic troubleshooting steps are restart, reset, restore from backup and restore as new device.  If those don't work, then you have a hardware issue with the phone (not a problem with the iOS 7 update) and will need to bring it to Apple for servicing.

  • I keep loosing signal on iPhone 4

    I keep loosing signal on my iPhone 4 even though I'm in a good signal area for O2. There are no faults as other people are not having the same issue. I use a case so I don't grip the phone wrong. The issue has gotten worse over the past 2 weeks. I have used another sim card and that doesent work. Does anyone have any idea what the problem could be. I look after my phone and this issue is really annoying me.

    reset the phone
    reset network setting

  • My Mac air keeps on loosing wifi and when I want to switch it on! It says wifi hardware not installed.  After about 5 minutes the wifi is back on, but only for about 10 minutes before loosing signal again.

    My Mac air keeps on loosing wifi and when I want to switch it on it says "wifi hardware not installed"  After about 5 minutes the wifi is back on, but only for about 10 minutes before loosing signal again.  This is really frustrating.

    I am also having the same problem.. Its too much annoying and its unfortunate nobody at apple support has anyclue of what is happening?
    ... This is happening almost most of the time keeping my phone down most of the times.

  • E71 looses signal and disconnects when in remote S...

    Regarding E71 and remoteSIM mode:
    Anyone experiences the same problem as I do, that the phone is loosing signal and few seconds later disconnects from the in-car bluetooth (VW Touareg with RNS-510 module)? Mine keeps disconnecting, E61i did not do that. When driving E71 stays connected to in car system for maximum few minutes and than looses signal first and disconnects shortly after that.
    Anyone here with the same car (unit) combination who could confirm/deny?
    Thanks
    Solved!
    Go to Solution.

    Still no solution from Nokia here.
    Make sure your RNS 510 (build in VW multimedia unit) has the newest firmware (recent is 1102). You can find out which firmware your device has by holding SETUP button when the device starts (and displays Welcome to Volkswagen screen). A new menu appears featuring the software version. Should it not appear (make sure you keep holding the button until the menu appears) that means you already have the new software version.
    Many people say that this solves the problem assuming you have the newest phone version 200.21.118 from 27-11-2008. I can't check myself as I have additional device connected to my RNS (TV free). Upgrading to 1102 would disable it which I don't want, so I'm still waiting for another solution...
    Good luck! 

  • IPhone loosing signal and bricking

    After updating 3G to 3.1 my phone is loosing signal WIFI and bricks after I press lock. It is frustrating as I am missing my important phone calls. Messages of missed call are also not coming thru.
    Any solutions. I read that even after restoring people are having problems.
    Hope Apple finds a solution soon. Loosing business.
    May try restoring the phone and reloading my data,which I really don not want to do.
    Maybe somebody comes with a solution.

    I guess I'm having the same issue... several people had complained about trying to call me without success. Every time it happens, when I take a look at the phone it states "Searching..." in the where the 3g sign normally stands. The another not normal behavior is constant failures when sending SMS... I'm forced to reboot the device. I'm almost sure that this symptoms had started after 4.2.1 upgrade.

  • HT1414 iphone 4s loosing signal

    Hi, have iphone 4s 32GB, recently updatd to iOS 6.0, kept loosing signal, yesterday lost signal completely, tried to reboot, restore..did not helped. any suggesstions? thanks

    Me too .In China thousands of people have the same problem.
    We had to change our SIM-card for several times.
    Few of them solved ,but most of us are using  APPLE's  expensive IPOD  TOUCH.
    So sad.
    We have to wait and wait for maybe IOS 5.02, Will that really work.

  • My iPhone 5 keeps loosing signal. Saying searching.....

    My iPhone 5 keeps loosing signal, goes from full signal to searching. This happens every time I got to text or make a phone call. Has anyone else have this problem? Also my texts are getting lost in cyber space for hours and people aren't  reviving them till the next day. Help?...

    Hi Lyndsay0812,
    If you are having No Service/Searching issues with your iPhone, you may find the following article helpful:
    iPhone: Troubleshooting No Service
    http://support.apple.com/kb/ts4429
    Regards,
    - Brenden

  • My iPhone cant reach any mobile network signals what do i do

    my iPhone cant reach any mobile network signals what do i do

    Have you talked to your cell provider? 

  • TS4148 I have an iphone 4s version 6.1 carrier o2-uk but it will not pick up any signal what do i do?

    i have an  iphone 4s version 6.1 carrier o2-uk but it will not pick up any signal what do i do?

    I got my real add-on work on FF4 now. Here is what needs to do (on VS2005)
    In project property<br>
    C++<br>
    General/Additional Include Directories - xulrunner-2.0.en-US.win32.sdk\xulrunner-sdk\include<br>
    Preprocessor/Preprocessor Definitions - MOZ_NO_MOZALLOC;XP_WIN;XP_WIN32
    Linker<br>
    General/Additional Library Directories - xulrunner-2.0.en-US.win32.sdk\xulrunner-sdk\lib<br>
    Input/Additonal Dependencies- nspr4.lib xpcom.lib xpcomglue_s_nomozalloc.lib
    Update module cpp by following the sample<br>
    http://mxr.mozilla.org/mozilla-central/source/xpcom/sample/nsSampleModule.cpp
    Add two extra directives on chrome.manifest<br>
    interfaces &lt;path/to/your/xpt&gt;<br>
    binary-component &lt;path/to/your/dll&gt;
    Add unpack property to install.rdf if needed
    https://developer.mozilla.org/en/Install_Manifests#unpack

  • HT2646 Mi apple tv show me on the tv conecting and after the tv said no signal what i can do

    My applet tv show me conecting on mi tv but they dont show me a menu and the tv said me not signal what i can do???

    Purchase a new remote or borrow one until you can set up the Remote App with your phone.
    http://store.apple.com/us/product/MC377LL/A/apple-remote?fnode=61

  • I am using iphone4 but sometime before it started loosing signal it automatically start searching signal., I am using iphone4 but sometime before it started loosing signal it automatically start searching signal.

    I am using iphone4 but sometime before it started loosing signal it automatically start searching signal, and give no service in 2G mode whereas under 3G mode it recognise signals for some time and sometime it start searching. where other mobiles work properly under both 2G and 3G mode.

    timing VI
    Attachments:
    Time_with_Counters.vi ‏112 KB

  • Update to ISO 6.0.2 keep loosing signal, getting no service, we use two iphone 4 and 5 I update it and others its ok, pretty sure it's update couse losing network signal , what shall I do ?

    Keep getting no service since update the iphone to ISO 6.0.2 .
    We have two iphone 4 and 5, 5 update and no service and 4 it's ok, same network.
    Apple could you help me with this please ?
    I do a lot work with phone and now I have phone only works with wi fi and keep breaking on my network.
    Thanks.

    My wife's iPhone 5 is having the same issue.  I also have an iPhone 5 with iOS 6.0.2 and mine works perfectly.  Not sure what can be the issue. 

  • Airport Extreme keeps loosing signal

    I'm pretty sure there's a couple of postings about my situation.
    I have the airport extreme (white cone) connected to my Mac Mini and Macbook. I recently upgraded to the lasted updates. I noticed that my macbook keeps on loosing the signal and it wont recognized the airport extreme. After a while, it will recognize the signal and then loose it again. I have reset my airport by pressing the reset on the back of the airport extreme. I heard that i can downgrade on the airport and firmware..can you guys advice on what to do about my situation? thank you.

    Change the DHCP-Lease-Time, that should help you...

  • Internal Airport looses signal

    I seams like my internal airport looses the wifi signal at times.  In my neighborhood I can pick up up to 8 wireless signalss, however my Macbook Air does seem to keep the signals.  What happens is when I first turn it on my signal is fine and the internet runs perfectly.  Then all of a sudden my internet speed will come to a standstill.  I go and check and instead of 8 signals i get 4.  I go back and check 3 seconds later its down to 1 or 2 signals.  I have a very erratic internet connection which is very frustrating.  Any suggestions?

    Hi Mark, and a warm welcome to the forums!
    Sounds like a heat problem, Get Temperature Monitor to see if it's heat related...
    http://www.macupdate.com/info.php/id/12381/temperature-monitor
    And/or iStat Pro...
    http://www.islayer.com/apps/istatpro/
    If you have any temps in the 70°C/160°F range, that's likely it.

Maybe you are looking for

  • Mail - The mesage "subject" could not be moved to the mailbox trash

    Hello, Suddenly, I started to receive an error message when I try to delete emails.: "The mesage "subject" could not be moved to the mailbox trash - "account name" The operation couldn't be completed. File exists. The strange thing is that sometimes,

  • Picture looks more fuzzy and compressed ONLY at start of movie

    Hi there I am using IDVD 6.02 on my MacBook Pro 17" Intel Duo. I am also running OSX 10.4.7. I have made an Imovie project that begins with some imported titles (white text on a black screen) and then leads into the movie. When I make this full movie

  • Controlling sound file with play, stop and mute button in AS3.0?

    the method for stopping/playing sound in 2.0 don't work for 3.0.  i can stop the sound by going to a different page/frame on the site.  but i want the buttons.  1. play button? 2.stop button? 3.mute button? thanks in advance!

  • [SOLVED] urxvt doesn't display correctly some special characters

    Hello everyone, I have a weird issue with urxvt. For some reason it doesn't display correctly some special character. Here is a comparison between xfce4-terminal and rxvt-unicode  (I used theses characters as exemple): xfce4-terminal : urxvt : And he

  • Redeploying jar files in Jdeveloper - 10.1.3.3.0

    Hi, Is there a way to redeploy an existing .jar file in Jdeveloper 10g (10.1.3.3.0). We are upgrading from Oracle - 11i to R12 and this .jar file is working in 11i and if I try to use the same in R12, I'm getting an IllegalAccessError in the OAF page