N8 Mail for Exchange (can not send mails)

Hi guys,
I just got my new Nokia N8. I already setup Mail for Exchange via IMAP to sync the mails, contacts and the calendar of my private mailbox.
Everything runs alright. But I can not send mails via Mail for Exchange. If I push on "New Mail" the program say the command can not be executed and breaks down.
Does someone know how to fix that problem?
 Thanks from Liechtenstein.
Phil

Hi,
I also had problems with unable to send emails.
I was getting error messages in the Mail for Exchange (MfE) log files such as
Setting DISK FULL status to false
Error occurred during sending mail. Setting status to waiting for reconnect
HTTP failure while sending messages.
I figured out a work around. The problem seemed to be with the certificate.
I ended up deleting the certificate and then only selecting "Accept this time only" which made everything work.
I am using a Nokia 5800.
To delete a certificate goto
Setting > Phone > Phone mgmt > Security > Certificate Management > Trusted site certificates
find the offending certificate and delete it.
The next time I tried to synchronize my emails with Mail for Exchange, I was asked to select whether to accept the certificate... press the option button.
Then select "accept this time only".
After doing that, the emails in the outbox were sent properly.
I have to figure out how to get this to work permanently, but for the moment it was a quick fix.
[I hope this helps. I tried to be as descriptive as possible and write with correct spelling so that search engines will collect it.]

Similar Messages

  • Mail for Exchange does not send letters

    Hi. I am from Ukraine and use MTS operator. The E-mail sets up OK both with IMAP and POP and woks both through GPRS and Wi-Fi. But I have a problem with bult-in Mail for Exchange application. I had set it up for a gmail account, it synchronizes mail, calendar an contacts OK, but when I try to send an e-mail I get an "Unable to perform operation" message. The same gmail account set up separately works OK and this same account was OK on Mail for Exchange (downloaded from OVI Store) on my N82.

    I'm using 2 accounts as well, an explicit Gmail account installed via the setup wizard and an MfE account for contacts and calendar that doesn't sync mails.

  • HT1430 Since downloading updates for ios 6.0.1 can not send or receive mail on iPhone and iPad

    Since downloading updates for ios 6.0.1 can not send or receive mail on iPhone and iPad

    Is this on wifi or cellular data?
    Have you tried a reset? Hold down the home/power button until you see the apple logo and then release, then wait for the phone to boot back up.
    Have you gone into the email settings and making sure the password are still there?

  • For some reason yesterday and today I can not send mail using the icloud website and help?

    From some reason I can not send emails using the icloud website.  Not sure why any help

    Hi there tamarafromdarien,
    You may find the troubleshooting steps for iCloud Mail in the article below helpful.
    iCloud: Troubleshooting iCloud Mail
    If you can't send mail in OS X Mail
    If you receive this alert or a similar alert when sending a message from your iCloud email address in OS X Mail:
    “This message could not be delivered and will remain in your Outbox until it can be delivered. The reason for the failure is: An error occurred while delivering this message via the smtp server: server name.”
    In OS X Mail, choose Preferences from the Mail menu.
    Click Accounts in the Preferences window.
    Select your iCloud account from the list of accounts.
    Click the Account Information tab.
    Choose your iCloud account from the Outgoing Mail Server (SMTP) pop-up menu. Example: “Derrick Parker (iCloud)”.
    Note: The Outgoing Mail Server (SMTP) menu also includes an Edit SMTP Server List command. If you choose this command, be aware that the iCloud SMTP server won't be among the servers that can be edited. This is normal.
    If you're attaching a large file
    Message attachments can't exceed the maximum size allowed by your email service provider or the recipient's email service provider. The maximum size varies by service provider. Try compressing the filebefore sending it, or send your message without the attachment to verify that there are no issues with sending.
    -Griff W.  

  • Internal mail can not send. mail stored in draft folder.

    Hello all,
    I have Exchange server 2010 installled on Win Server 2k8 R2 which is running on VMware workstatione. I installed three server OS (2k8 R2) and that server one is my  AD and DNS server. On another two OS, one is for Hub transport and CAS role and
    second one is for Mailbox server. In exchange, I am able to configure new mailbox or Database. But through OWA, my mail cant send. User can able to login into server. He can access OWA page as well can access for Address book. But when I send the mail for
    internal user, it is stored in draft folder. also meeting schedule can not send. I am testing exchange in lab environment. Please help me to resolve this issue.

    Hi,
    From your description, I recommend you run the Test-ServiceHealth cmdlet to verify if all the Windows services that Exchange server requires have started, especially the Microsoft Exchange Transport service.
    If all the services that Exchange server required are started, please use message tracking to trace these undelivered messages and check if there is any error.
    Hope it helps.
    Best regards,
    Amy
    Amy Wang
    TechNet Community Support

  • HT1752 I can not send mail with my powerbook g4 running tiger

    I can not send/receive mail using tiger 10.4.11.  Can anyone help?

    Hello Gerry, who is the Mail provider, the part after the @ sign?
    Plenty of problems of late with AT&t, Yahoo, and dot mac/MobileMe, but some possible fixes for the last one. *

  • Can  not send mail using wifi at a motel .I can receive mail fine

    can  not send mail using wifi at a motel .I can receive mail fine

    Hi there tamarafromdarien,
    You may find the troubleshooting steps for iCloud Mail in the article below helpful.
    iCloud: Troubleshooting iCloud Mail
    If you can't send mail in OS X Mail
    If you receive this alert or a similar alert when sending a message from your iCloud email address in OS X Mail:
    “This message could not be delivered and will remain in your Outbox until it can be delivered. The reason for the failure is: An error occurred while delivering this message via the smtp server: server name.”
    In OS X Mail, choose Preferences from the Mail menu.
    Click Accounts in the Preferences window.
    Select your iCloud account from the list of accounts.
    Click the Account Information tab.
    Choose your iCloud account from the Outgoing Mail Server (SMTP) pop-up menu. Example: “Derrick Parker (iCloud)”.
    Note: The Outgoing Mail Server (SMTP) menu also includes an Edit SMTP Server List command. If you choose this command, be aware that the iCloud SMTP server won't be among the servers that can be edited. This is normal.
    If you're attaching a large file
    Message attachments can't exceed the maximum size allowed by your email service provider or the recipient's email service provider. The maximum size varies by service provider. Try compressing the filebefore sending it, or send your message without the attachment to verify that there are no issues with sending.
    -Griff W.  

  • Mail can not send emails, but can receive emails

    My apple mail have two mail account,   one is gmail,   another is pop3 mail ( 263.net ),    I can send and receive email via gmail account,   but can not send email through another account (263.net ),   meanwhile I can receive email via this account.    I sure all the setting is right.   I also found this "can't " is occasionally.   sometimes I can send,  but sometimes I can not send email.    But for gmail account,  It is OK for all time.
    Why

    This may help
    https://discussions.apple.com/message/22569311#22569311

  • When I set up my mail I could send emails now a day later I can not send them but can still receive them ... I can't see what is wrong .. Any answers .

    When I set up my mail I could send emails now a day later I can not send them but can still receive them ... I can't see what is wrong .. Any answers .

    It's not a good idea to use a network disk for both Time Machine backups and other things.  By design Time Machine will eventually consume all the space on its output disk, which will then cause problem for your other files.  I'd store those other files on an external disk connected to the Time Capsule.  The problem with that is that Time Machine will only back up files that are local to your Mac.  That means that you'll only have one copy of the files on or attached to your Time Capsule.
    By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject.  In the future just type a short summary of your post into that field and type the whole message into the field below that.

  • Can not send e-mail in mac os x 10.4.11

    can not send e-mail in mac os x 10.4.11

    non sequitur wrote:
    I'm not sure I know what you mean by 'what settings are you using in the accounts part of mail preferences', but I'll give you as much information as I can in the hopes that some of it is responsive.
    In "preferences" I select "accounts" and there are 3 listed:
    'personal gmail' (IMAP)
    'business gmail' (IMAP)
    'Yahoo' (POP)
    For each of the above, the "Account Information" tab gives:
    description: [username]
    email address: [correctly reflects my address]
    full name: [my name]
    Incoming mail server: imap.gmail.com
    user name: [my username]
    password: [*** - I've re-entered to ensure it is my true password]
    outgoing mail server (SMTP): smtp.gmail.com:username
    Is it all in the same format on the iphone?
    This is the same information for the 2 gmail accounts, with the exception of the usernames differing. If I click "server settings" at the bottom, it reflects the outgoing mail server "smtp.gmail.com" server port 25, my correct user name and password.
    Again, different names for the different accounts, right? And this is the same port etc. as you put into the iphone
    All of the above information matches what I input into my iPhone, and it has worked fine since day 1, so I don't understand the malfunction.
    Open /Applications/Utilities/Console. Make sure console.log and system.log are open (or see the File menu).
    Try to send an email.
    Look for new lines in the log files (it should scroll down automatically so the newest lines are at the end of the log at the bottom of the window). What do you see? (Erase or substitute for any personal info before posting.)
    Do you use any firewall software or have you used third-party software or Terminal to configure the builtin firewall?
    - cfr

  • Can not send be-mail os10.9.4 server offline !!

    can not send be-mail os10.9.4 server offline !!

    Hey there mikeneiris,
    It sounds like you are not able to send any emails because the account is showing as offline. I recommend these steps from the following article to help you get that going again:
    Mail (Mavericks): If a mailbox is offline
    http://support.apple.com/kb/PH14925?viewlocale=en_US
    To take an account online, click the lightning bolt icon. Or choose Mailbox > Online Status > Take [account name] Online, or Mailbox > Take All Accounts Online.
    If you can’t take an account online, make sure you’re connected to the Internet. If a warning icon appears after the account name, click it for more information.
    Use Connection Doctor
    Some mailbox names can appear dimmed if you don’t have permission to access them, such as “public” mailboxes on a server, or if the mail server is unavailable.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • Can not send mail, but do receive mail at a different location

    I am on my way to college now and while staying at a hotel I can connect to the internet using the hotel high speed wired connection at the room. When I try sending mail using my MacBookPro mail application, I can not send any mail, but can however receive email. It keeps giving me error messages regarding the server for outgoing mail.

    Mail Help has some articles devoted to sending problems, e.g. I can't send email or I can't send email because the connection to the server on port 25 timed out. You may want to take a look at them in case there is something there that applies to you.

  • Ever since i upgraded my os to lion, my quickbooks can not send emails to my draft folder in mail.  help!

    ever since i upgraded my os to lion, my quickbooks can not send emails to my draft folder in mail.  help!

    Snow Leopard breaks quite a few drivers - my Canon exhibited the same problem.
    I eventually found updated drivers on the Canon website. You can try that with the HP, but if the all-in-one is more than a year or so old, don't hold your breath.
    You can also try Software Update to see if it will offer new drivers, or failing that go to the Support Downloads site and search for HP updates.
    In fact there's a new one for HP at the top of the list just now.
    You may not necessarily want the latest one, though - check the specs to see if your model is covered; if not, search for the previous update etc.

  • Why can I download Gmail to my mac's mail - but I can not send?  I have followed all instructions I can find but it still won't send.  Any thoughts?

    I have a strong desire to use the native apps on my Mac for mail and calendar - but my new position is using Gmail.
    I can send mail and calendar works fine - but I can not send mail.  I have followed all the directions and still can't see to get it to work.
    Is there a step I am missing?  Has anyone else successfully tackled this issue?
    Thanks
    Bill

    Are there any error messages to give us a clue?
    There is no 'issue', millions of people use Gmail with a Mac, they send mail so the 'issue' is with your machine so we'll concentrate on that. Post the SMTP settings that are in use for this account, post the authentication method as well, tell me whether you have activated Google's '2 Factor' authentication method if you have.

  • HT2693 can not send mail using mac mail

    can not send mail using mac mail

    Google for:
    setup XX email on iphone
    where XX is your email provider

Maybe you are looking for

  • Unmountabl​e_boot_vol​ume

    First and foremost, my laptop is a Satellite E105-S1402 which came with windows vista, and I upgraded to windows 7 last year without any problems until now. Every time I attempt to boot up windows 7 the screen freezes, goes black, and then my cursor

  • CLASSPATH, Jar file or zip file visibility during compilation and  run time

    I am using jwsdp-1_0_01 with some success. However, making my *.jar or *.zip files visible during ant builds is not working. Setting a CLASSPATH environment variable (BTW: I on a Linux box) seems to have no effect. I'm using the ant build machinery f

  • Relation between Co document and FI Document

    Hi sap Gurus, Can someone tell how is the best way to get the Co document from the FI document? I need a good relation between then. I saw table cobk but that table hasn´t the the Fi document. Best Regards                João Fernandes

  • GRC Access Enforcer - Technical Dependency?

    All, My organisation currently has GRC Compliance Calibrator and Firefighter installed with version 4.0. Our landscape is based on SAP NW 2004 (XI3.0) with ERP2004 (ECC5), BW3.5 and SRM4.0 We want to implement Access Enforcer but do not have a java s

  • Change History of Sales Order

    Hi All, Does anyone know the name of table which store the history of Sales Order modification? t-code VA02 I can check the changes under the environment pull-down menu, but can I get this record and create a ABAP report for it? Please help. Terry