N8 messaging application freezing

i have tried searching the forum. Not sure if others having the same problem with messaging.
Whenever i send or receive msg, the phone hangs for a while..
have any body faced similar problem?
ive around 1000 msgs in inbox and 200 in outbox. can this be a problem ?
i tried deleting a few, but didnt notice any difference...
folks from nokia please do reply..

go into applications,office,file manager, check phone memory, how much free memory is there? hold on it and select details and see how much mb messages takes up
Nothing is as it seems
If I've helped , click the Star under my name

Similar Messages

Message application freezing when adding new contact from the messages application

if someone is sending the message with the phone number included in the text, i touch the number and whait till options will pops up, choosing create new contact and ok. then the messages application freezes for a long time... few minutes. have to double press the home button and switch of the message app from the background. So have to start message app again to be able to use it. How to sort this? Its happening more than one year and have changed few phones already.

Snow Leopard and iCloud compatibility is very limited, and it may be that the phone's OS requires iCloud for the syncing:
https://discussions.apple.com/docs/DOC-2551
I would enquire in the iOS forums to find out if there is a way without iCloud now to sync.

Messages Application Freezes

This started happening all of a sudden, the messages app freezes when I go to minimize it. I end up having to force quit the app, and then restart. Problem still happens. I have lastest Mavericks installed. I purchased this MacBook Air in sept of 2013, and use the messages more than my iphone.
It started happening Friday of last week or so. Does anyone have this issue or know a fix? Really annoying more than anything.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a couple of minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; Pc () { o=`grep -v '^ *#' "$2"`; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d; /[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]||0[^2]8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in Thunderbolt USB; do o=`SP $b | sed -En '1d; /:$/{s/ *:$//;x;s/\n//p;}; /^ *V.* [0N].* /{s/ 0x.... //;s/[()]//g;s/$.*: $$.*$/ $\2$/;H;}; /Apple|SCSM/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); E=; for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* || continue; ls | while read f; do [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && e=" *" || e=; awk -F_ '!/ag$/{$NF=a[split($NF,a,".")]; print $0 "'"$e"'"}' <<< "$f"; done | tail`; Pm "${D[$i]} diagnostics"; done; [[ "$o" =~ \*$ ]] && printf $'\n* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|last value [1-9]|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail/B,P*P,Qu*T,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; [[ "$ID" =~ ^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID ]] || printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`for e in DYLD_INSERT_LIBRARIES DYLD_LIBRARY_PATH; do launchctl getenv $e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l | sed 's:/Users/[^/]*/:/Users/USER/:g'); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know your password, or if you prefer not to enter it, just press return three times at the password prompt.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
8. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Message application text messages on macbook pro from iPhone

When I first got my macbook pro, my iphone text messages popped up in the Messages application on my macbook, but now they don't. How do I fix that?

HI,
If you mean SMS messages you can't.
That is not part of the "Sync" function of the iMessages side of the Messages app on both Mac and iOS device.
Basically the iOS version can send iMessages when it and the recipient are on Wifi.
At other times it will send SMS messages (if this is enabled on both devices).
However only the iMessages ones will sync to other iOS device and the Mac that are using the same Apple ID.
NOTE the "Sync" is only Display on All Devices and each is then independent of anything you do to the messages on one device.
9:51 pm Friday; February 14, 2014
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

When I try to open Firefox I receive this message, "Application has failed to start because ssl3.dll was not found." HELP!

I've been using Firefox for about 3 years. Today, I ran a scan of my computer Webroot Anti Virus and deleted all "risky stuff" they checked. Don't know if this is a coincidence but right after the scan I could not open Firefox. I receive the message, "Application has failed to start because ssl3.dll was not found. Reloading application may remedy this." I reloaded Firefox, the current version, clicked on open and received the same message. I've reloaded Firefox 3 more times with the same results. Now I need HELP.

See if you can make Webroot restore that file in the Firefox program folder (C:\Program Files\Mozilla Firefox\).<br />
If not then you need to reinstall Firefox and make sure that Webroot doesn't do that another time.
You can find the latest Firefox release here:
*Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

Is there a way to make a mobile number clickable in an inDesign PDF document, that will open a Texting or Instant Messaging Application?

Thoughts are to allow groups of individuals mobile numbers to be shared across larger organizations, from within a PDF document, that the mobile numbers would be clickable, and open up a Text or instant messaging application on either the computer, tablet, or smart phone, for instant communication.

1st, more information will help people help you... Information FAQ http://forums.adobe.com/message/4200840
2nd, did you do as directed in next link, to be sure your sequence and video match?
See 2nd post for picture of NEW ITEM process http://forums.adobe.com/message/3776153
-and a FAQ on sequence setting http://forums.adobe.com/message/3804341
3rd, what... exactly... are you editing?
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/
4th, buying a 2nd hard drive now does not mean you can't move that drive to a new computer
http://www.newegg.com/Product/Product.aspx?Item=N82E16822236339 is a good drive

Basic behavior - compile vs. save, application freezes and other questions

Hi all,
I've just recently moved from MS SQL to Oracle and found Oracle SQL Developer the only more or less working application to access the database and write scripts. Still, there are some issues which are beyond me in this application. So what I'd need to know:
1) When I open a package and edit it, what is the difference between hitting CTRL+S (save) and Compile? I just need to change the code, not run the damn script. Run and Debug I suppose would execute the whole package.
2) When I save a package, why does the application freeze? I have no idea what it is doing, but when I kill it the code is not changed.
3) When I connect to packages of a different user why cannot it export the ddl / source code of the whole package?
4) When I am inactive for some time, is there some normal way to reconnect to the connection other than disconnect + connect, which closes all windows I have open on the connection?
5) Why does drag + drop a table name to SQL worksheet sometimes offer me to create a script and sometimes ignores me completely?
6) Is there any way to convince the popups with table/column names to work also with variables and/or to show also data types of columns? Incidentally, is there a way to make it work all the time and not just during favorable moon phases?
Thank you ever so much for answering any but preferably all questions.

1. None
2. Might be a lock - check the Enterprise Manager
3. What is connecting to packages? How are you trying that export?
4. Go vote on http://htmldb.oracle.com/pls/otn/f?p=42626:39:1538555050886906::NO::P39_ID:10421 to add weight for a real reconnect option
5. Script? You mean insert/update/select, right?
6. You mean the completion insight? Note you can force it to show with CTRL-space. If that doesn't work you'll have to be more specific.
Regards,
K.

Why i keep getting the message application could not be downloaded at this time on ipad2

Why I keep getting message application could not be downloaded at this time, for applications purchased for the app store. I have tried resetting my ipad and that did not work, so now I have all this apps that I have purchased but will not download.

Hello tay19
Check out the articles below to troubleshoot updating your iPad. You may be having an issue with a firewall or other security software preventing iTunes from communicating with the update server.
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Thanks for using Apple Support Communities.
Regards,
-Norm G.

After updating to iOS 8.2, messaging application is unstable

I have updated my iPhone 5 to iOS 8.2 and when I now go into the Messaging application and decide to delete a message thread, the whole messaging application is very slow and then all of a sudden all my message are gone.
This has happened 3 times since I updated and every time it has happened just after I have deleted a message thread, so it seems to be 100% reproducable on my phone.
The only solution I have so far is to reboot the phone after each time my messaging application have deleted my messages. The only problem is that the message thread that I tried to delete comes back together with all the other messages. So in the end, I can never delete a message thread anymore.
Have any one else seen this and maybe have a solution to have to work around this so that you can delete a message thread without running into problems?
Thanks.

I have upgraded my iPad 2 as well to iOS 8.2, but there I can delete a message thread without any problem. But on my iPhone it is still impossible to delete a message thread without the messaging application behaves strange and then basically deletes all messages, but then they come back after reboot.
Just annoying to not being able to delete messages anymore....specially if you get adverticement messages that you don't want to keep....
I hope this gets known to apple so that they fix it in an upcoming release.

Since 2.2.1 upgrade, force quit doesn't work after an application freezes

Sorry if this was posted before, but I couldn't find a post that matched my issue.
Has anyone else noticed that since upgrading to 2.2.1 on the 3G, if an application freezes, force quit doesn't work. I have to do a hard reset inorder to get the OS to respond again. Even tried to just hold the power button to do a power off and it doesn't respond.
Any advice? Tried restoring to 2.2.1 many times didn't help.

Thanks for the response. I have done a many restores as "new iphone" and reinstalled apps. I normally get freezes when I'm in a twitter type application and using the "mini/lite safari browser" within the twitter app.
When the phone doesn't freeze, I can force quit apps at will. It's only after a freeze (when I need force quit the most) does it not work....
I would make a Genius Bar appointment but I can't recreate it at will.

I get download error message "application cannot be found"

when i try to download a file from a website : after the download i try to open the file and get the error message "application not found"
== This happened ==
Every time Firefox opened
== tried to download files from other websites

Hello Ken.
Are these any kind of files or just some files in particular?
Also, why do you think this issue is related to Firefox?

Using OSX 10.5.8, just downloaded latest version of Firefox which now refuses to load with the message "Application quit unexpectedly".

I am unable to load Firefox on my iMac using OSX 10.5.8. Having just downloaded the latest version of Firefox, every time I try to load it, I just get the message "Application quite unexpectedly." When I go to the Firefox website to re-load the software, nothing happens when I click on download.

Hello.
Hopefully this support article is what you need:
http://support.mozilla.com/en-US/kb/Firefox+crashes+when+you+open+it
In any case, it's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
If you need support for one of your add-ons, you'll have to contact its author.
If the problem does not disappear when all add-ons are disabled, please tell me, so we can work from there. Please have no fear of following my instructions to the line, as all can be easily undone.

Excel 2010 Dialog Boxes Hidden behind Application causing application freezing

Recently upgraded to Office 2010 (32bit) /Windows 7. Have hundreds of users that we support and so far most have upgraded. Noticed with some users though - not all - just a small percentage, when they click SaveAs in Excel 2010, the application
freezes. On closer scrutiny we realized what was happening was the SaveAs dialog box was BEHIND the main Excel window. The only way to restore it is to click on the tab from the Taskbar or minimize all the windows to FIND the SaveAs Dialog box.
Understandably this is causing these users stress and inconvenience. It is very unproductive and a nuisance to say the least. The only other variable here is that all these users have multiple monitors, usually 2-4. But for some, this happens
in their main monitor and/or the monitor that Excel is opened in and which has the focus. Even more strange is that this does not occur to everyone, just a handful of users so far who have reported the issue. We have also noted it happens
with other dialog boxes as well, not just the SaveAs so it seems generic in that sense.
The other item with this issue is that it's not persistent. Users have reported it's sporadic and comes and goes.
Is this a bug?
Any feedback greatly appreciated.

On Wed, 14 Dec 2011 20:51:03 +0000, Nootrino wrote:
>
>
>Recently upgraded to Office 2010 (32bit) /Windows 7. Have hundreds of users that we support and so far most have upgraded. Noticed with some users though - not all - just a small percentage, when they click SaveAs in Excel 2010, the application
freezes. On closer scrutiny we realized what was happening was the SaveAs dialog box was BEHIND the main Excel window. The only way to restore it is to click on the tab from the Taskbar or minimize all the windows to FIND the SaveAs Dialog box.
Understandably this is causing these users stress and inconvenience. It is very unproductive and a nuisance to say the least. The only other variable here is that all these users have multiple monitors, usually 2-4. But for some, this happens
in their main monitor and/or the monitor that Excel is opened in and which has the focus. Even more strange is that this does not occur to everyone, just a handful of users so far who have reported the issue. We have also noted it happens with
other
>dialog boxes as well, not just the SaveAs so it seems generic in that sense.
>
>The other item with this issue is that it's not persistent. Users have reported it's sporadic and comes and goes.
>
>Is this a bug?
>
>Any feedback greatly appreciated.
A search using Google reveals that this may be a problem with W7, and was first reported during beta testing!
http://social.technet.microsoft.com/Forums/en/w7itprogeneral/thread/0bbefdc5-7f20-4b9f-8b24-1be76d6b7996
and for a possible fix, but with some serious caveats:
http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/7f4543cf-874d-4a39-bea5-34a824e4c0ce/
Ron

Messages application not displaying messages

Hi everyone, i am hoping to get some help here.
anytime i miss a call, the missed call log takes over my messages application (even though i did not enable call logs to be displayed in my messages application). So when i open my message or email application i will not see my emails but my missed call logs will be displayed there until i do a hard reset.
This is starting to annoy me. Is there a fix to correct this error?
Thanks

"My Device: Blackberry Curve 9315/9320"
What model BlackBerry is this? Where did you get a "9315" from?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Hello! I have the Acrobat XI test version installed, got the registration Mail and confirmed it. When i have the program opened and try to convert the file from a pdf to a word and press the convert button, it shows a the message "application failed" (in

Hello! I have the Acrobat XI test version installed, got the registration Mail and confirmed it. When i have the program opened and try to convert the file from a pdf to a word and press the convert button, it shows a the message "application failed" (in german "Fehler bei der Anmeldung"). I hope have explained the issue on the right way with my bad english. Do you have a solution for it?? Best regards, Marcus Wenk

yes, you are right. it is the adobe reader via exportPDF. but it should be the acrobat. it was written on the internetpage...

N8 messaging application freezing

Similar Messages

Maybe you are looking for