N8 my mobile showing password error while unlockin...

n8 os is symbian anna, actually it has no password,then also it is not unlocking if we insert another sim,
due to this mobile not accecpting other sims..
but this problem was there before installing anna,
mobile not locking or unlocking,
and all the other functions are doing well except this security one,
give me a solution to this plz plz........

yeah.. yeah
i used F-secure mobile security and also netquin
whenever f-secure was on ,my mobile used to hang.coz of dat i've disabled f-secure....
after uninstallation of that one this problem came out..... actually not after uninstallation , the problem started before itself , but i didn,t take it seriously.
and then i've hard formatted my mobile(using camera key,menu key,volume down key) , thought that the problem perishes,but its not......

Similar Messages

My 5s showed an error while updating to ios 8.1 and it has hanged and its not turning on

my 5s showed an error while updating to ios 8.1 and it has hanged and its not turning on

Did you click on the link just below that that says:
iOS: Device not recognized in iTunes for OS X
iPhone, iPad, or iPod touch not recognized in iTunes for Windows
You have to read the entire support article and follow the subsequent links if the first solutions do not resolve the issue....
GB

HT201210 ITUNE IS SHOWING AN ERROR WHILE RESTORING AND UPDATING MY IPHONE 3G 8GB

Itune is showing n error while restoring and updating my iphone please tell me now what to do

usama1133 wrote:
Itune is showing n error...
And this ERROR would be...?

My I Mac showed an error while updating the OS and now just hangs. What should I do?

I Mac asked me to update the OS from 10.7.3. It showed an error and now the computer just hangs. Its become excuriatingly slow. Takes about 15-20 minutes to boot up and takes hours to perform any function. I tried to update the OS again but it keeps showing an error in connecting to the server. What do I do.?

Have you tried booting into the Recovery HD to check/repair your disk. Restart holding Command+R - once booted select Disk Utility and then select Macintosh HD and click on 'repair disk' If it fixes anything click repair disk again until you get a clean pass. Whilst in Disk Utility you could also 'repair disk permissions' With Macintosh HD still selected click on 'repair disk permissions'. Once done, restart as normal from the Apple menu.
Then try updating again using the 'combo', available here: http://support.apple.com/kb/DL1582
If you still have problems you could try a Safe Boot: restart holding down the shift key until you see the grey progress bar. Once booted restart as normal from the Apple menu.

Getting invalid password error while logging onto application from frontend

Hi Guys
I am trying to login to one of our clones and i am getting invalid password error.
I ran fndcpass and change my username's password which got changed successfully
But still when i login to application using my username i am getting invalid password error
I am getting the same error if i login as sysadmin
Please suggest to resolve this
thanks !!

Hi,
I am trying to login to one of our clones and i am getting invalid password error.What is the application release?
Please post the complete error message -- Also, check Apache log files for details (error_log* and access_log*).
I ran fndcpass and change my username's password which got changed successfullyWhat username password have you changed?
But still when i login to application using my username i am getting invalid password error
I am getting the same error if i login as sysadminDoes this happen when login as any application user?
Please verify that none of those users are end-dated.
Regards,
Hussein

The System shows an Error while creating an Inhouse Repair Order

Hi Experts,
I am facing a problem related to An Inhouse repair Order. when i create an order the system shows me two errors
1. An error occurred in system during account assignment
2. An error has occured in the system while copying the document
What could be the possible problem with the order....
any help will be highly appreciated.....
Thanks in Advance.....

Hi vickee.sehgal ,
Can u please provide inhouse repair configuration settings in crm 7.0. I have requirement on this,i am not able to find relevant best practices.
Thanks & Regards
kishore kumar

Password error while using biserverxmlexec utility

We are migrating our DEV RPD to production and making use of the biserverxmlexec utility.
We have followed all the steps described in 10.3.5 Moving from Test to Production Environments at https://docs.oracle.com/cd/E14571_01/bi.1111/e16364/xml_about.htm.
The xudml patch file was successfully created. We also run the bi-init.cmd command to set the environment variables. We are using the following command:
D:\Middleware\Oracle_BI1\bifoundation\server\bin\biserverxmlexec -I D:\testconnpool\XUDML\PRDASIOPSXUDML.xml -P testpassword -B D:\testconnpool\SOURCE\ASIPRDOPSRepository.rpd -O D:\testconnpool\TARGET\ASIPRDOPSRepository.rpd
The script fails with the following error:
[94040] Input Patch File(s) have passwords different from the original repository. Add patch file password(s) with the parameter -S to the patchrpd command.
However, when we perform same steps and run the same command while migration from dev to UAT, the scripts works fine and connection pools and passwords are changed successfully.
Any idea why its failing with the error [94040] Input Patch File(s) have passwords different from the original repository. Add patch file password(s) with the parameter -S to the patchrpd command.What does the patch file password(s) mean?
Thanks in advance.

Satish is right, there exists bug for 11.1.0.6.
Look at metalink note 741984.1.
Bug number is 5872788 - there exists patch as well.

Configtool Secure Store JDBC password - Error while connecting to DB

Hi All
I was following the note 701654 which asked to update the config tool secure store pssword. I changed the JDBC password too instead admin password alone. Now the problem is the config tool is not able to connect to the database and this lead to the jcontrol.exe to be stopped. We tried to give back the DB password we remembered unfortunately none of them worked. Please guide me to get around this.
Should I need to change the DB password if so please let me know the procedure and the places I need to do the change.
Thanks, Raj

The problem was fixed. I changed the DB password directly in the SQL server and updated it in the secure store and it worked.
Note 997510 gave a good idea on the error and the solutions.
Thanks, Raj

THE System showing ABAP error while activating the "lead questionairre".

Hi Experts,
I have ceated a new "questionnare" for the leads.
while making it as active i am getting ABAP errors.
Please let me know what has went wrong in this area.
I have copied the standard one to create a new questionaree.
waiting for the response.
Thanks in advance
Prajith P

Hi,
Are you loading from the Flat File or from ECC?
If you are loading from FlatFile then you have to specify the InfoObject names in the "Template InfoObjects" area in DataSource-->Fields Tab.
Then when you create the Transformation then the Rules will be created Automatically.
Regards,
rik

Getting invalid username/password error while trying to create_queue_table

Here is how I get it.
connect / as sysdba
create user aq identified by aq
default tablespace users
temporary tablespace temp
quota unlimited on users;
grant connect,
create type,
create procedure,
aq_administrator_role
to aq;
grant execute on dbms_aq to aq;
grant execute on dbms_aqadm to aq;
begin
dbms_aqadm.grant_system_privilege('ENQUEUE_ANY','AQ',FALSE);
dbms_aqadm.grant_system_privilege('DEQUEUE_ANY','AQ',FALSE);
end;
connect aq/aq
create Type aq.message_typ as object (
subject Varchar2(30), text Varchar2(80)
begin
dbms_aqadm.create_queue_table(
queue_table => 'aq.objmsgs80_qtab',
queue_payload_type => 'aq.Message_typ',
multiple_consumers => true);
end;
Error at line 1:
ORA-01017: invalid username/password; logon denied
ORA-06512: at "SYS.DBMS_AQADM_SYS", line 2934
ORA-06512: at "SYS.DBMS_AQADM", line 58
ORA-06512: at line 2

In what version of Oracle?
I see a couple of problems assuming you are working with a currently supported version:
1. Never grant CONNECT to anyone: Ever. Grant CREATE SESSION.
2. GRANT CREATE TABLE to AQ;
Go to Morgan's Library at www.psoug.org and look at AQ Demo 1. You should have no problem cutting and pasting your way to where you are trying to go.

Password error while installing ESA on CE 7.2:How to Install ESA on CE 7.2

Hello All,
I installed CE 7.2 from Downloads of SDN.. Now I want to install or have esa to model.. I downloaded ESA for CE from SMP ... while installing it asked for password of J2EE... I am providing the right password but still its saying wrong or user is locked.. Where as I am able to login to GO.bat and able to deploy sda files ..
Java stack is up and running... How can i install ESA on CE7.2
Any solution ?
Thanks
Rajeev

Hi Rajeev,
As you said that you are able to deploy sda files...then you can also deploy ESA SCA file...
I think if it ask for J2EE password during ESA SCA file installation then you can provide for master password or J2EE user if you have set during installtion of CE 7.2
Hope it helps
Regards
Arun

Fact table with datetime measure showing #value error while browsing the cube

Hi All,
I have a cube with a fact table having datetime measure.
when I browse the cube, I am able to see the data for all measures except for the measure with the datetime as datatype.
Thanks in advance.

Hi jarugulalaks,
Actually this forum is to discuss:
Visual Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System, and Visual Studio Editor.
To make this issue clearly, would you mind letting us know more information about this issue? Whether it is the VS IDE issue? Which language are you using? Which kind of app are you developing? Maybe you could share us a screen shot about it.
But like this case posted by you here:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/bc2d30b8-a60d-4f0f-a273-b7cf0f5aaed5/value-error-for-datetime-measure-in-ssas?forum=visualstudiogeneral#bc2d30b8-a60d-4f0f-a273-b7cf0f5aaed5
If it is the SSAS issue, please post this issue to the SSAS forum for dedicated support.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error while executing Servlet. java.lang. (Error in loading Specific Driver

Hi all,
I am getting the following error while running the servlet.
Error:
java.lang.ClassNotFoundException: com.microsoft.jdbc.sqlserver.SQLServerDriver,
The above error arise while I try to access a data from the database table using servlet through browser, but the same driver works well in jdbc program(jdbc alone).
Here is how I am load the driver:
Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver");
con=DriverManager.getConnection("jdbc:microsoft:sqlserver://NODE1:1433","**","**");
con.setCatalog("senthil");
Here is my software specification:
Tomcat5.5.26,
MS SQL Server 2000 Driver.
Looking forward to your reply,
Thanks in advance,
Senthil.

Hi,
Thanks for your reply.
Yes, I am using the Eclipse IDE, and it doesn't shows any error while I save the servlet source file.
Please find the below source code:
*1. JDBC program to retrive data from the database table: No issue works well.*
The below source code works well and I used it to retrive the data from the database table using the jdbc.Here there is no problem, the source code works well.
package pak;
import java.sql.*;
import java.io.*;
class UserDataDemo
     public static void main(String args[])
          Connection con;
          ResultSet result;
          try
               Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver");
               con=DriverManager.getConnection("jdbc:microsoft:sqlserver://NODE1:1433","user_name","password");
               con.setCatalog("datadase_name");
               Statement stat=con.createStatement();
               result=stat.executeQuery("select * from table_name");
               while(result.next())
                    System.out.println("**************************************");
                    System.out.println("Name :"+result.getString(1));
                    System.out.println("Company :"+result.getString(2));
                    System.out.println("Position:"+result.getString(3));
                    System.out.println("Emp Id :"+result.getInt(4));
                    System.out.println("Place :"+result.getString(5));
          catch(Exception e)
               System.out.println(e);
*2.Issue: Servlet program used to retrive data from the data base table through jdbc:*
Here I am getting above said error : java.lang.ClassNotFoundException: com.microsoft.jdbc.sqlserver.SQLServerDriver
Please note, here I dosen't get any compile time error(i.e, eclipse ide doesn't shows any error while saving this file).
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.sql.*;
public class ServletTest extends HttpServlet
     String name;
     ResultSet result;
     PrintWriter pw;
     public void doGet(HttpServletRequest req,HttpServletResponse res)throws ServletException,IOException
          Connection con;
          try
               res.setContentType("text/html");
               pw=res.getWriter();
               Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver");
               con=DriverManager.getConnection("jdbc:microsoft:sqlserver://NODE1:1433","user_name","password");
               con.setCatalog("database_name");
               Statement stat=con.createStatement();
               result=stat.executeQuery("select * from table_name");
               while(result.next())
                    pw.println(result.getString(1));
          catch(Exception e)
               pw.println(e);
Also please note, I have no problem in running the servlet alone.
Looking forward to your reply,
Thanks,
Senthil.

Cache refresh error, while activating changelists

Hi all,
I got a problem, concerning XI Runtime Cache on XI 3.0, SP15 -> when I try to activate changelists from Integration Directory, (SOMETIMES!)XI_CACHE shows status: Error, while refreshing cache
with Errortype: Communication,
"if_http_client receive http_communication_failure"
When I then do a delta or full cache refresh from transaction SXI_CACHE it allways works, even after an error occured before. Some ideas, what I could check?
Thank you in advance..
Daniel

Hi,
Just check with Tcode SICF and check for all the services are working fine.
Go thru following links
http://service.sap.com/NW04 ->How-to Guides-> Exchange Infrastructure->How To handle Caches in SAP XI 3.0
Also go thru following thread.
problem with xi cache
Hope this helps.
Regards,
Moorthy
Regards
Suraj
Regards,
Moorthy

Error while updating HRA in infotype 581 for the employees.

Hi,
System is showing an error while updating HRA in infotype 581 for the employees.
The error is No Automatic updation for IT0008. Allowance Grouping not found.
What is this error. Please advice what to do in this case.

Hi Deepthi,
Check Table V_T7INA5,V_T7INA1,V_T7INA3 and V_T7INA9 also.
Check it,
Regards,
Vinod.
Edited by: vinod rao on Jul 30, 2008 1:23 PM

N8 my mobile showing password error while unlockin...

Similar Messages

Maybe you are looking for