N8 Offline GPS Initial Lock Problem

Hi
Hope I'm posting on the right board, I'm new to this!.
I've just got a unlocked N8 after my 10 year old unlocked 5100 decided to have a moment!.
It's running Belle Software Version 111.040.1511
From what i understand off the internet.
The nokia N8 has a good internal GPS and should be able to get a lock without assistance.
You use internal GPS to get a more precise fix.
There are 24 non stationary satellites orbiting the planet.
There should be 5 satellites visible from any point on the globe.
I have to receive a sequential stream of data from 3 satellites in line.
I think I must be doing something wrong because I can't get a lock.
01. Updated ovi maps (V3.08) via nokia suite
02. Downloaded england map to phone via nokia suite
03. Wlan off
04. Integrated gps only
05. Offline (no sim inserted)
06. Turned on maps and left on a table outside in cornwall for 2 hours with a clear view of the sky & not a cloud to be seen
07. Installed Legpsdata2 to try to see if satellites were about - went to satalite status (system) - left outside on a cloudy day for 1 hour (can legpsdata get a lock by itself?)
08. Turned wlan on by accident whilst in maps and got placed in berlin in seconds, brilliant but I'm in England!
09. Spent more hours trawling the internet for an answer
10. Posted here
Maybe the problem is the same as some internet companies have and the GPS thinks cornwall is not part of England?.
could someone give me a step by step guide to set up gps as I can't find one on the internet!.
Many thanks in advance.
Grant.

@Vacant_G
Almost certainly cause of problem is (05) no SIM inserted, irrespective of whether you don't intend using Assisted GPS positional method requiring a network connection.
Surprised that you are runing v3.08 still as Nokia Maps Suite 2.0 uses v3.09:http://store.ovi.com/content/265481
As regards (08) it is a little joke from the maps developers in Berlin that it always defaults here when application started for first time before it has any GPS ephemeris data to work with.
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

Will updating my iphone 5s from 7.1.2 to 8.2 lock it. my phone was initially locked.my friend brought it from usa.i gave a computer vendor rs 5000 and he said he will factory unlock the iphone.so it was unlocked in this way.its not softwared unlocked

will updating my iphone 5s from 7.1.2 to 8.2 lock it. my phone was initially locked.my friend brought it from usa.i gave a computer vendor rs 5000 and he said he will factory unlock the iphone.so it was unlocked in this way.its not software unlocked nor it is jailbraked.that vendor said that he will factory unlock it.wat i know is that there are some online sites which take some amount (equal to what i paid 50$ )and officially and factory unlock it
so can u plz help me regarding this issue
its working absolutely fine on 7.1.2

i am from pakistan
my friend got it unlocked from hyderabad ,there the mobile guy assured us that he will factory unlock it for rs 5000.. he just took the imei number and in 3 days iphone 5s was unlocked. he didnt take the phone so i knew he didnt jailbreak it or did some hacking stuff .. i have the box with me too with all accessories.but my friend doesnt know which carrier to it was locked....as his friend gave it to him from usa
on reading problems on net i just stopped the update via wi fi.fearing it will be locked again :/
but i think its orignal carrieer was At&T

Activation lock problem!

Hello,
I just got a new iPhone 4s from a friend and I can't get into it because of an activation lock problem. I've already tried to restore it in recovery mode but than I still have to log in to his account. Now i've logged in to his iCloud account and deleted the iPhone using the following instructions:
Sign in to their iCloud account at www.icloud.com/find.
Click All Devices to open a list of devices linked to their account, then select the device to be removed. It should show a gray dot or the word “Offline” next to the device name.
Click "Remove from Account" to remove the device from their account.
But it seems that I have should done the following instructions, because the iPhone wasn't completely erased yet:
Sign in to their iCloud account at www.icloud.com/find.
Click All Devices to open a list of devices linked to their account, then select the device to be removed.
Click the Erase button to erase all content and settings from the device. When prompted, don't enter a phone number or message. Click Next until the device is erased.
When the erase is complete, click "Remove from Account" to remove the device from the account.
The problem is that it's too late for that now, because I already deleted the iPhone from his iCloud... Please help me out here, what can I do to still erase it from iCloud?!
Greets

Were you, by chance, running a beta version of iOS 7 on your phone?
If so, this will be the problem. You will need to log Into the private developers forum athttps://developer.apple.com/support/ios/
If you are not a developer, you will need to seek help by way of your favourite search site.

Locking problem in VL02N at the time Post Goods issue

Hi,
We have implemented 2 BADIs to change qty in delivery and in subsequent documents. Once we receive an IDoc with batches, then we need to change subitems qty according to no of batches.
Once IDoc has updated, then PGI will do automatically.
1. LE_SHP_DELIVERY_PROC - Change qty in delivery (Method SAVE_DOCUMENT_PREPARE)
2. LE_SHP_GOODSMOVEMENT - Change qty in material document.
Now, we have a locking problem at the time of posting.
Please let us know, due to these BADI implementation this problem or any other cause? And provide required to solve this problem.

hi ,
do i need to do step 2....?
i dont think u need step2 ( change qty of MBLNR),bcos ,
say ur Del.qty is 100, now u want to do del. of 50, then just u will change its qty & do PGI ? so whats the need of changing MBLNR.
while doing PGI , program will take changed qty of del. only ?
let me know if i'm wrong.
regards
Prabhu

Forms 6i : Ole Container : Locking problem

We have a form in which user can attach all sorts of documents that are then saved in the database.
Once in a while we have a locking problem; when 2 users try to open the same document, the second one first gets a 'Could not reserve record (2 tries). Keep trying?'. When clicking 'No', the next error message is 'Frm-40501 : unable to reserve record for update or delete', and the form cannot be used anymore. He keeps complaining about the reserved record.
I've been looking into this problem but cannot seem to find a lot of help.
Does anyone have an idea how to solve this locking problem?
I have tried the following things:
* setting the block to locking mode 'Delayed' => we ended up having duplicate records.
* Changing properties of the ole-container (In Place Activation, Inside Out support, ...).
Forms version is 6.0.8.13.0, database 8.0.6.0.0.
Any help is appreciated.

that seems to be a normal locking problem. Do you have tried to work with an ON-LOCK trigger ? (e.g. first to see, when locking will occur, second for implementing an own locking-behaviour, maybe with a SELECT for UPDATE)
Or do you think, that there is something special with your OLE-programming ?
Gerd

Lock Problem while Broadcasting multiple reports using process chains

Hi All,
I am trying to broadcast 10 reports using the process chains using the program for RSRD_START and variants created in the Broadcaster..the Program jobs start fine.But I am facing the error that the RSRA_CA_LOG table is getting locked while trying to broadcast the Reports..Can any help me on how to run the jobs without the locking problem..Suggestions please.
Thanks,
Mike.

Hi,
Thanks for the Inputs and the SAP Notes.
I am trying to broadcast the Reports from the the Bex Analyer and getting this ock error and not the workbooks.
I am also trying to Broadcast the Workbooks also, but could not find the options to Broadcast them. we are in SAP -BW3.5 SP 12, Is it possible to broadcast the workbooks in this Patch level..or do we need to upgrade to achieve this.If so...can any one provide me the proceedure to Broadcast the Workbooks.
Thanks,
Mike.

Offline GPS/maps

Does anyone know of any really good offline GPS/maps for traveling to another country? I'll be heading to Rome, Spain, Monaco, Tunisia and Italy next week and Beijing, China in May and I really need some good apps that will help me with directions and places. I'll need an offline GPS for when driving (doesn't have to be that accurate because I know iPhone can't replace an actual GPS), and a map showing public transit system and major places in those countries; other features would be nice too. The app has to be offline because obviously there's no connection outside.
Thanks!

GPS access does not equal turn by turn directions. Turn by turn directions can be included with a GPS device, but if a GPS device does not include turn by turn directions does not mean it isn't an actual GPS device or does not have a GPS reciever. These are not one in the same. Firmware update 3.0 will support an app that provides turn by turn directions using the iPhone's GPS reciever with maps data stored locally on the iPhone.
Unless you can find an app via the app store that includes the map data you will be needing, you will be out of luck.

Offline Gps for playbook india

I have a BB playbook 16gb version.
I am in India.
any offline Gps apps available for PB?
mine is wifi version.
but i cannot connect to wifi when i am outside so need an offline version

Try the app Osmand
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

JavaScript error and CATW record locking problem

Hello,
We're having two problems with ESS (CATW and Personal Information (PZM3)) in EP 6. We have an ITS-R/3 landscape.
The JavaScript problem appears intermittently within Personal Data services (Address, Emergency Contact, ...). The actual error reads "object required" and originates from ITS. A user may be able to click through all the ESS services once fine, but on a second click receive the error. Sometimes they can't use the services at all.
The record locking problem happens in Time Sheet (CATW). Even though a user Saves and Releases the Time Sheet, it remains locked and cannot be approved. Alternatively, some users are experiencing locked records when they try to complete their own time sheets.
I'm not sure if these are related.
Has anyone here seen these problems? Any suggestions are most welcome!
Cheers,
Colleen

The best way to nail down the javascript error would be to use the firefox JavaScript debugger extension plugin and put the breakpoints where the problem occurs.
This will exactly tell you which object it is looking for which is not found. Moreover you might be able to find that when it is working fine as you said. So give that a try and I am sure you will be able to figure out the problem.
To me this mostly looks like at time some .js file is not coming through to the browser... but this is just a wild guess based on the symptoms.

Pessimistic lock problem with Sybase

I am having a problem with performing pessimistic lock
using Toplink and Sybase/HSQLDB.
Code example:
Object o = uow.readObject(...
uow.refreshAndLock(o);
//Change o
uow.commitAndResume();
==========================
I receive an Exception:
Local Exception Stack:
Exception [TOPLINK-4002] (OracleAS TopLink - 10g (9.0.4.2) (Build 040311)): oracle.toplink.exceptions.DatabaseException
Exception Description: java.sql.SQLException: Unexpected token: FOR in statement [SELECT t0.CLASSIDENTIFIER, t0.DB_VERSION, t0.OBJECTID, t1.OBJECTID, t1.NAME, t1.DESCRIPTION, t1.TYPE, t2.OBJECTID, t2.MULTIPLE_SERVERS_POLICY, t2.OUTAGE_POLICY, t2.INCOMING_SCRIPT, t2.OUTGOING_SCRIPT, t2.OUTAGE_SCRIPT FROM ROOT t0, LDAPSERVICE t2, SERVICE t1 WHERE ((t0.OBJECTID = 252) AND (((t2.OBJECTID = t0.OBJECTID) AND (t1.OBJECTID = t0.OBJECTID)) AND (t0.CLASSIDENTIFIER = 'ORM.LdapService'))) [b]FOR UPDATE OF * NOWAIT]
=================
As you can see Toplink is trying to execute illegal statement : "....FOR UPDATE OF * NOWAIT"
Do you have any idea what I'm doing wrong?

Duplicate posting Pessimistic lock problem with Sybase

Lenovo A3000 GPS not locking location

Hi. I just bought A3000
Im using waze but the gps never lock.
I have already tried gps status & toolbox, it always searching but never lock to any position.
Any suggestions?

SOunds very odd for sure. I know my A3000 does take nearly 1 min to lock on my location here in the USA. Have you applied the Lenovo available update? Just a thought.

Dead lock problem occur in Ms-Sql Server

Hi friends,
I am using the 1,Tomcat server
2, jdbc-odbc-bridge driver
In my applicaiton .mutli user access time its throw -deadlock
exception . How to solve the dead lock problem.. please help it.
Can i modify the Db connection?
please help me .... How solve the dead lock problem..
please ............ its urgent

I am using this stored procedure to occur dead lock condtion. Orderly insert table values ..
Imm_tblGameTransactions- Primary Tables
Imm_tblGameDetailsBJ - Secondary tables
Please check it.....
Please explain breifly..... ....
please.........
CREATE procedure IMM_BJDeal
 @plid int,
 @gameid int,
 @betamt money,
 @bal money,
 @winamt money,
 @usercards nvarchar(500),
 @dealercards nvarchar(500),
 @useracecnt int,
 @dealeracecnt int,
 @dealerbj int,
 @userbj int,
 @insurance int,
 @split int,
 @push int,
 @sessionid int,
 @ltransid int out
as
 begin
 declare
 @transdate datetime,
 @linitbal money,
 @lfinalbal money,
 @errormesg varchar(50)
 select @linitbal=balance from Imm_players.dbo.Imm_tblPlayerbalance where playerid=@plid
 select @transdate=getdate()
 --set @ldealcards ='['+@dealercard1+','+@dealercard2+']'
 --print @ldealcards
 if(@userbj=1)
 begin
 select @lfinalbal= @bal
 begin transaction
 insert into Imm_tblGameTransactions
 (playerid,gameid,Initialbalance,transactiondate,betamount,winamount,currencycode,finalbalance,sessionid)
 values(@plid,@gameid,@linitbal,@transdate,@betamt,@winamt,'USD',@lfinalbal,@sessionid)
 IF @@ERROR <> 0
 Begin
 -- There's an error b/c @ERROR is not 0, rollback
 ROLLBACK
 return
 End
 select @ltransid=@@identity from Imm_tblGameTransactions
 insert into Imm_tblGameDetailsBJ(transid,playercard,dealercard,typeid,result,statusid,split,insurance,playercardcount,dealercardcount,winvalue,betvalue)
 values(@ltransid,@usercards,@dealercards ,1,1,'PB',@split,@insurance,@useracecnt,@dealeracecnt,@winamt,@betamt)
 IF @@ERROR <> 0
 begin
 -- There's an error b/c @ERROR is not 0, rollback
 ROLLBACK
 return
 end
 update Imm_players.dbo.Imm_tblPlayerbalance set balance=@lfinalbal where playerid=@plid
 IF @@ERROR <> 0
 begin
 -- There's an error b/c @ERROR is not 0, rollback
 ROLLBACK
 return
 end
 commit transaction
 return
 end
 else
 begin
 begin transaction
 insert into Imm_tblGameTransactions(playerid,gameid,Initialbalance,transactiondate,betamount,winamount,currencycode,finalbalance,sessionid)
 values(@plid,@gameid,@linitbal,@transdate,@betamt,@winamt,'USD',@bal,@sessionid)
 IF @@ERROR <> 0
 Begin
 -- There's an error b/c @ERROR is not 0, rollback
 ROLLBACK
 return
 End
 /*ELSE
 COMMIT -- Success! Commit the transaction*/
 select @ltransid=@@identity from Imm_tblGameTransactions
 insert into Imm_tblGameDetailsBJ(transid,playercard,dealercard,typeid,result,split,insurance,playercardcount,dealercardcount,winvalue,betvalue,statusid)
 values(@ltransid,@usercards,@dealercards,1,3,@split,@insurance,@useracecnt,@dealeracecnt,@winamt,@betamt,'G')
 IF @@ERROR <> 0
 Begin
 -- There's an error b/c @ERROR is not 0, rollback
 ROLLBACK
 return
 End
 /*ELSE
 COMMIT -- Success! Commit the transaction*/
 commit transaction
 return
 end
end
GO

Locking problem in BPS solution not getting solved using RSPLSE. SEM_BPS_S

Can anyone tell me exactly what "rsplse" offers to solve locking in BPS?
We have made correct selection of characteristics (in our case "costcentre" infoobject) in tab "Lock characteristics" , but still when two people are trying to access (write) data in the same transactional cube against the different cost centres, the system is throwing an error message Cube zIC_ccp is locked by username. (Or if a single person is using the two packages simultaneously using two web sessions , he is getting the same error. )
Our assessment is that he should not be facing this locking problem because cost centres here are acting as a key to different selection as configured in rsplse.
Can anyone tell me how to use parameter SEM_BPS_SAVE_UNLOCK. I want to know t. code and other t . code and other details to execute SEM_BPS_SAVE_UNLOCK.

Hi,
Please check the OSS note 635244.
From the OSS note :
 Notes on SET/GET parameters SEM_BPS_NO_LOCK, SEM_BPS_SAVE_UNLOCK :
These two parameters have nothing to do with the problem described above. They are only designed to facilitate the Customizing process, if users carry out Customizing in t ransaction BPS0 within a project.
SEM_BPS_NO_LOCK: This parameter has the effect that transaction data is not locked at all. Never use this parameter in a production system. As of Support Package 14 for Release 3.1B, parameter SEM_BPS_NO_LOCK is released by an additional switch in table upc_dark2: For this purpose you have to maintain a record with param = ENABLE_NO_LOCK and value = X in table upc_dark2. Only then the system includes parameter SEM_BPS_NO_LOCK. The parameter can then be useful if you want to test functions or the manual planning with 'test data' in Customizing.
SEM_BPS_SAVE_UNLOCK: This parameter only works in transaction BPS0; it has the effect that the system unlocks data (if possible) after it has been saved. Therefore, the system only simulates an exit and reentry in transaction BPS0 with the last active detail application. Therefore, the above parameter can be helpful if many people work on Customizing in transaction BPS0, because objects can be unlocked earlier.
Regards,
Siva.

Gentile Apple, non riesco ad utilizzare expressline, forse i vostri server sono offline. Ho un problema con iCloud,: possiedo 2 IPAD, un IPAD2 e un NUOVO IPAD. Non essendo piu' in possesso del IPAD2, volevo eliminare il backup su iCloud di questo ipad2,

Gentile Apple,
non riesco ad utilizzare expressline, forse i vostri server sono offline.
Ho un problema con iCloud,:
possiedo 2 IPAD, un IPAD2 e un NUOVO IPAD. Non essendo piu' in possesso del IPAD2, volevo eliminare il backup su iCloud di questo ipad2, ma non riesco a farlo.
Non riesco a cancellarlo ne dall'IPAD NUOVO nè dal computer, tramite pannello icloud.
Vorrei eliminarlo per ripetere un nuovo backup "pulito" da mio nuovo IPAD.
Scusate se utilizzo questo canale ma gl'altri sembrano fuori servizio.
Andrea

Gentile?

Article says K8N Neo has SATA frequency locking problem

This article says that the K8N Neo has SATA frequency locking problems when overclocking:
http://www.nforcershq.com/modules.php?name=News&file=article&sid=1801
First of all, is this true?
And if it is true, do we have a BIOS that fixed this problem.
My drives are PATA right now so I currently don't have any problems but I plan to get SATA drives/adapters soon.
I'm running 240 HTT (1:1) so not having the SATA frequency locked could be an issue.

Well, I´m running HTT 230 now, and I´m always using my Raptor as OS disk. Haven´t had any problems yet (with my disk). It´s connected to s-ata_1. Haven´t tried the other ones.
But sometimes when I boot (200 or 230HTT, doesn´t matter) I get artifacts on the boot screen and in Windows, so I have to restart.
Could it be a partially working AGP-lock? It seems as at works most of the time, but sometimes not... Strange... AGP is set to 66-67MHz

N8 Offline GPS Initial Lock Problem

Similar Messages

Maybe you are looking for