N8 overexposed too bright picture

I have a camera problem for my N8 , if i take a picture it becomes overexposed too bright picture
i tried to make factory default and software re-installation from Nokia Suite
but the problem not resolved
please advise what to do
Attachments:
2013-12-05-1749[1].jpg ‏669 KB
2013-12-05-1751[1].jpg ‏571 KB

Unfortunately, you have done all that can be done without visiting a Nokia Care Point and you may even have issues getting parts for the N8 now, but all I can suggest is to have a professional repairer check it out as it looks to be a physical issue
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Similar Messages

N8 Overexposed too bright pictures. Camera problem...

Good day to all.
I have a Nokia N8 and there is a problem with a camera. When taking photos in the dark or low light places, the camera is just wonderful, the pictures are great.
But...
In daylight/ bright light or even cloudy day the camera is taking overexposed pictures. Here is example of the pictures, that i took yesterday in the cloudy conditions.
I tried: to lower ISO, Exposure, white balance. Nothing helps. Tried to take pictures with CameraPlus program, still nothing.
Tried to do hard reset - nothing. I even changed the Sw from Scandinavian 11.5 to latest belle, nothing helped. It seems, that all the SS changes somehow bypasses the camera drivers or something. Could it be physical damage?
By the way, the N8 warranty period has expired. What should I do? Thank you for your time.
imageshack.us/scaled/landing/26/aaaoscq.jpg Here is the link of the picture
Attachments:
aaa.jpg ‏72 KB

So...
Yes ND filter seems to be working as I turn phone in the bright light it comes on. Few days ago camera gived me another surprise . In all photos top you can see purple and blue bubbles.So I took phone to the nokia care centre. Phone doesn't have warranty anymore, so they told me, that firstly they recommend me to change camera module and that would cost me arround 75 dollars. That is the half of a price that i payed for the phobe. So that's way too expensive for the student I thinking about changing camera module by my self. Will it help?
Attachments:
2012-12-04-004.jpg ‏1658 KB

Blur,noisy,too bright pictures after lollipop update

After lollipop update pictures with superior auto mode or manual mode comes very blurry.I'm not using phone case.With flash or without,pictures comes too grainy.Anyone else have problem with camera?
Please give me solution

I suggest that you try to repair the phone software using PC Companion..
Before repairing your device you may want to backup your information first. Check out this topic for more information on how to.
How to backup?
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Images too bright in PSE, good in Windows Picture Viewer.

Hi:
My question is this, I shot some pictures of my son last weekend, in studio,
with a Nikon D2X camera, and a softbox lightbank mounted on a Balcar
flash head. I set the camera to RAW-JPEG Fine, ISO 100, and used a
Minolta flashmeter to measure the light from the strobe. The reading was
f/8 and 2/3. The images look good in the LCD camera display, but when
I see them in my PC display, they look way too bright in Photoshop Elements 7.0,
but they look fine in the Windows XP SP3 Picture Viewer.
Why is this?. If I adjust the contrast and brightness in PSE, then they look too dark
when I check them in Windows Picture Viewer...
Also, the highlights look a little burned out in both, PSE and Windows Picture Viewer,
but the problem looks more evident in PSE. This happens often when I shoot pictures
using strobe lights.
Can you help me with this two problems?.
I have attached one of the pictures so you can take a look at it.
Thanks.

As to why the photo looks different in PSE than in Windows Picture And Fax Viewer, there are two possibilities:
1. Your display may have a color profile associated with it, either because you calibrated it with a calibrator or a profile was installed by the disk that came with your display. PSE is "color managed" and will adjust the colors of a photo based on the display's color profile, whereas Windows Picture And Fax Viewer will not. If you want fine control over accurate display of colors on your display, you'll need to calibrate it if you haven't already, and you should then only use color-managed programs like PSE to view your photos.
2. The photo you posted indicates that you've set your camera to use the Adobe RGB color space for JPEGs. The Organizer has a bug and doesn't display the thumbnails (even large thumbnails) of such photos correctly. The Organizer's Display > Full Screen (F11) and the Editor do display such photos correctly. I'm not sure if this particular photo will trigger the bug, because of the way Nikon in particular stores color profiles in JPEGs. You could see if you're getting hit by this bug by:
a. Open the photo in the Editor.
b. In the Organizer, make the photo's thumbnail as large as possible (not Full Screen view).
c. Adjust the zoom of the photo in th Editor to be about as large as the one in the Organizer.
d. Use Ctrl Tab to switch quickly between the two. If you see differences, you're encountering the bug.

Outdoor pictures too bright

Hi,
I have problem with outdoor pictures taken with my blackberry, they are too bright and often come out as a white screen. Object on screen before I take the picture it looks good but once picture is taken screen changes and picture appears as almost white screen. Indoor pictures are still good. I played with different white ballance settings but it had no effect at all. Anybody have the same problem or solution to this?
Thank you

I finally was able to find a post that resolves this issue. It turns out to be a software problem related to
OS 4.5.0.37. After upgrading to 4.5.0.69, camera is working fine again.
Here a link where to download this version
http://www.filefactory.com/dlf/f/7842a7/b/7/h/9b55728c8ca96c5f68399acabe3d4e5f/j/0/n/8100E_PBr4_5_0_...

Images in Bridge CC too bright

Why do my images show almost 2 EV too bright in Bridge CC after filing from PS CC, but have a perferct match when opend on Bridge CS6?

Why do my images show almost 2 EV too bright in Bridge CC after filing from PS CC, but have a perferct match when opend on Bridge CS6?
Either you have set Auto Tone adjustments set in Camera Raw preferences or have created a custom default ACR setting for this file type which is set to overexposed.

Final rendering of video is low quality and too bright

Here is the link to my original video clip, the video clip in the project, and the final rendered copy all on my monitor at the same time:
http://i157.photobucket.com/albums/t63/shadon1nja/FixingRenderQuality_zps124306a5.png
Here is the text of each video when fullscreened screened:
http://i157.photobucket.com/albums/t63/shadon1nja/RenderText_zpsd1240701.png
The picture got downsised which makes it harder to see the issue,but here is most of the it:
The final copy is lower quality and way too bright. Noticibly too bright. The clean darks turn into rough gray, and the quality is noticibly lower as well. I have checked the "use maximum render quality" and tried exportiing in AVI and MP4, and nothing is fixing it. Any ideas?

First of all, what type of file do you need? If you're looking for lossless quality then I would suggest exporting a quicktime file with the Animation codec or some other lossless codec. However, these type of files are huge and they might not play back on your desktop. But, if you're just going to put this video on the internet when you're finished with it then I would suggest starting with one of the Youtube or Vimeo H.264 presets and modifying it to match your clip. It still won't look as good as your original, but you can't expect miracles when working in SD and exporting to H.264, which is a very lossy codec to begin with. If you want to try exporting to a lossless Quicktime or AVI, then change the settings so they look something like this:

HP LaserJet 100 colorMFP M175nw scanned images are too bright

Hello!
Is there a way to change scanner's default image color correction as currently all of resulted scanned images (text documents, graphics, photos) are unnaturally too bright?
I had another HP Ink Jet printer also with scanner and all scanned images have good color correction there.
So I think there is a problem with my current one.
Does anyone knows how to fix it?
Thanks.

Hello, Futoji!
Sorry for big delay.
I did what you've told me and now I am wondering about what I see.
1) To scan documents I use both HP Scan and Apple Image Capture with default settings (no color correction).
Well it does not matter, though, because I see bright pictures right after scanning them.
2) I scan documents from flatbed (not feeder), well it is the same for feeder.
3) So, what I noticed was that printer scanned document and printed it almost exactly as it was only using hardware buttons on it.
But when I did scan using both programs above the same document, it was getting too bright to be real... When I printed such scanned image the result was accordingly bad.
So, what I think is that this scanner works differently for hardware buttons and software or applies some filters on the resulted image...
I found 2 similar posts to mine, they are describing the same problem for different printers, but unfortunately they didn't seem to be solved.
http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/HP-Laserjet-DNF-MFP-1536-scanner-washes-out...
http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/F380-problem-with-scanning-too-bright-image...

Laptop monitor too bright

I set the brightness setting on my laptop monitor to the lowest setting, but it is still too bright. I fixed the desktop by putting a picture with dull colors on it. But the white websites on Firefox are hard on my eyes, way to bright. Can I change background color or brightness on Firefox screen?

The post reply was a link to a support article.
https://support.mozilla.org/en-US/kb/change-fonts-and-colors-websites-use

FCP Filter control brightness? - washed out - too bright?

We filmed a high school jazz choir presentation, 4 -HD canon HFS 20 cameras. We had the white balance set to incandescent. The video was edited using multiclip. It all looks very good, on all the close up cameras. The wider shots look a little washed out or too bright. The lighting on the stage was pretty bright, so if a student had a white shirt on and the lights were directed at his/her head, it kind of blended together slightly. In general it looks pretty good, but I was wondering if there was a way to cut that (overexposure?) down using FCP, or is there something I need to do when we film.

Hello Jeff,
generally you should avoid overexposing your footage. Most cameras have a "Zebra" that will indicate areas over 100 IRE. Blown out video may not be fixable in post because the information in the overexposed areas may be lost. You can try the following:
• 3-way color corrector; easiest approach but not very powerful
• take the footage into Color for grading; this is much more sophisticated as you can work on selected areas.
• if you don't want go through Color you could give this tool a shot: http://www.pistolerapost.com/pluginz/captains.zip
hope this helps
mish

The old calender iOS6, in the year view, it shows how much busy I am in a day by indicating the color intensity. But the new calendar year view is totally useless!!! also too bright!! Why apple does this?? What is the way to revert the calendar back???

The old calender iOS6, in the year view, it shows how much busy I am in a day by indicating the color intensity. But the new calendar year view is totally useless!!! also too bright!! Why apple does this?? What is the way to revert the calendar back???

Unfortunately, that's the way the cookie crumbles nowadays. Sir Jony Ive's GUI design for iOS7 has been met with much skepticism (to say the least). But until the company sees the compelling need for an adjustment or reversal, it "ain't happenin' ". So amble over to the feedback page ( http://www.apple.com/feedback/ ) and make your displeasure known to the company, OR make it known by not purchasing its products. Because as long as the iGadgets continue selling as fast as they can make them, they will see no need for change.
BTW, do note you are NOT talking to Apple here. This is just a user-to-user forum.
Edit: for now, you can also try out any of the alternate calendaring apps available in the App Store.

I have sensory issues. How can I find an external monitor that isn't too bright?

I have sensory issues which make bright lights very painful. Some monitors are too bright to look at. I chose a Macbook Air, in part because Apple allowed me to dim the screen, but I wanted to find an external monitor so I could use the Macbook as a desktop as well as a laptop. I recently tried an Aoc monitor, but it doesn't allow me to dim the screen enough without special software. I would rather not have to use extreme settings [Brightness 0] and special software [Easy on the Eyes] to dim the screen. I had tried comparing brightness in-store, locally, but I guess I couldn't tell because the store was full of bright lights, and because I was wearing sunglasses to cope with the bright lights. Can anyone suggest ways to find better more accessible monitors?

There are two ways. Likely if you have the money, the Apple monitor would likely be the best options since it powers your macbook and other stuff as well. It is expensive though. For a nonApple monitor the feature you are looking for is called backlight level. The brightness control doesn't actually control brightness as might be expected because it modifies the signal. The backlight level however does control the brightness of the backlight itself, like the buttons on a real mac. You won't be able to use the buttons on the keyboard though. So when you go shopping, make the salesman show you this feature in the store in the monitors interface and you should be good to go.
Also, if you are sensitive to bright light, did you know about the ability to assign a single key on the keyboard to invert the screen instantly? I prefer white text on black myself.

PRINTER DISPLAY SCREEN ALMOST COMPLETELY WHITE (TOO BRIGHT/FADED/?)

I cannot read the images on my printer’s display (Product HP Officejet Pro 8600 e-all-in-one printer - N911a). The images are there, but barely discernible. I can't put my finger on whether the screen is too bright or too faint, or the images are too light. The display is NOT blank or black (and the HP Troubleshooting solutions to correct those problems have not corrected my problem, ie Hard Power Reset, updated firmware, and adjusted brightness setting), just too bright or too faint. Even with the screen brightness on the darkest setting, I still cannot make out the images. Interestingly enough, at the end of the day yesterday, the screen self-corrected somehow, and was back to a readable display. However, it reverted back to the problem overnight.

Hi busymom51 & otcheryl,
I understand that your issue is not the same as the title of the troubleshooting guide listed above: The Touchscreen Does Not Respond, however the troubleshooting steps are the recommended steps to attempt the resolution. If you followed the steps and the issue is not resolved, try again to update the firmware.
If your 8600 is the N911a, try this firmware update: HP Officejet Pro 8600 N911a Firmware. The printer will need to be connected to a Windows computer via USB for the firmware update.
If the 8600 is the N911g or N911n, use this update: HP Officejet Pro 8600 N911g_n Firmware. The printer will need to be connected to a Windows computer via USB for the firmware update.
If the firmware update does not help the dim display, contacting HP's Technical Support to see about further options for you would be the best option.
If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

I have a Black i-phone 5, iOS 7 on a black phone is horrible, there should be a darker setting for black phones... it look horrible on a black phone because it does not match... its too bright... I think there should be a darker option!!

I have a Black i-phone 5, iOS 7 on a black phone is horrible, there should be a darker setting for black phones... it look horrible on a black phone because it does not match... its too bright... I think there should be a darker option!! Is there going to be a darker option of the software???

jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport

24" IMAC Display Too Bright

I am still doing DD on changing from WinTel to Apple. I have viewed both the 20 inch and 24 inch models at a local reseller. I have heard of several complaints that the 24" is too bright. Is there any validity to this complaint? Can the Brightness be easily adjusted? And a third question are there advantages to using a local reseller rather than a purchase directly from Apple re the net?

Hello,
The iMac 24" isn't an iMac (Flat Panel) in Apple's eyes so those of us in this forum won't be nearly so familar with specific issues like the brightness of the display on the 24" iMac. You should re-post your question here.
Of course the local retailer you can speak to face-to-face about your requirements and return it for support in the very unlikely event you have any issues. The online store may well be a very little cheaper and will probably have better build-to-order option.
G4 (Flat Panel): Intel:
regards
mrtotes

N8 overexposed too bright picture

Similar Messages

Maybe you are looking for