N8: Power saving - Visibla or not visible

In the power saving settings of my N8 there is the choice among "Visible" and "Not Visible" related to the request to switch to power saving mode when battery low. Someone knows the difference? I'd prefer the N8 to switch automatically in power saving when battery low without asking, so, is the "not visible " option to allow this?

Deactivate the Power Saver Mode via the power key is not working as well. The phone shows that the POWER SAVING MODE DEACTIVATED but the settings still don't change to normal. So far, this was the biggest problem with my N8. I really hope that the upcoming firmware of the N8 will address this issue.
Nokia 3310, 8250, 6070, 6060, 3120, 1110, 1280, 5300 XpressMusic, N76, 6120 classic, 5800 XpressMusic, 5530 XpressMusic, N900, C3-00, N8-00, N9, 700, X2-01, Asha 302, Lumia 610, Lumia 920, Asha 501, Lumia 820 and Lumia 1520...

Similar Messages

Power saving features do not work

I use the better performance when plugged in and normal when unplugged. Shouldn't the dispaly change from max to a lower setting when i unplug the power cable etc. Also i leave the keyboard brightness to full but at times it drops to a lower setting etc. It shoud either be full or off depenind on the light in the room.

Richard,
Open Energy Saver preferences. While there, unplug the power connector from the MBP? Does the display dim a little bit? If not, toggle the Optimization to one of the other settings then back to Normal like you want. Did the display dim? Now plug the power back in. Did it work as expected?
As for the keyboard, if you want it to remain off in low light conditions, uncheck the Illuminuate keyboard in low light conditions option. You could look at the keyboard brightness keys as setting a max brightness. The keyboard brightness will still fluctuate based on the light level in the room but will only get as bright as the setting you put in.
Did I make that clear as mud?

N8 - Power Saving Mode

Hi,
I got a bit problem here. My N8 will automatically activate the POWER SAVING MODE once the phone battery goes low. I've set the power saver mode query to "ON" so that the phone will ask wether to activate the power saving mode or not. When I choose "NO" the phone will automatically turn the power saving mode in the background without displaying an icon (the battery icon will appears as a "moon"). The big clock screen saver is set to NONE, the theme effects switch to "OFF" and the light time out will change from 30 seconds (default) to only 5 seconds.
Any idea or help? ThanX!
Nokia 3310, 8250, 6070, 6060, 3120, 1110, 1280, 5300 XpressMusic, N76, 6120 classic, 5800 XpressMusic, 5530 XpressMusic, N900, C3-00, N8-00, N9, 700, X2-01, Asha 302, Lumia 610, Lumia 920, Asha 501, Lumia 820 and Lumia 1520...

Deactivate the Power Saver Mode via the power key is not working as well. The phone shows that the POWER SAVING MODE DEACTIVATED but the settings still don't change to normal. So far, this was the biggest problem with my N8. I really hope that the upcoming firmware of the N8 will address this issue.
Nokia 3310, 8250, 6070, 6060, 3120, 1110, 1280, 5300 XpressMusic, N76, 6120 classic, 5800 XpressMusic, 5530 XpressMusic, N900, C3-00, N8-00, N9, 700, X2-01, Asha 302, Lumia 610, Lumia 920, Asha 501, Lumia 820 and Lumia 1520...

Using both power saving mode and offline mode caus...

So I am having a very strange problem. I have been using the Situations App (formerly Nokia Situations) to automatically put my phone into offline mode, and power saving mode over night. 9pm to 6:30am.
Recently the phone as started refusing to leave the offline mode in the morning. Even if I try to change the profile manually it says "Unable to change profile". The only way I can get out of offline mode is to reboot.
I uninstalled Situations, and manually put the phone into offline mode and power saving mode. By the morning I had the same issue, stuck in offline mode until reboot. So it's not the App causing the problem. I've tried a soft reset, same problem still.
I also noticed that over-night (from fully charged before 9pm) to 6:30am I used about 70% of my charge. (A combination of power saving mode and offline mode is killing my battery!)
I would have to go to work and immediately put my phone on charge! I.e.. 12 hours of offline + power save has drained my battery almost completely.
Last night I decided to use the Situations App to put the phone into offline mode, BUT NOT activate power save mode.
This morning the phone had virtually full charge and it had no problem returning to online mode. So it's ONLY if I use BOTH power-save and offline. (Tonight I will try using power-saving mode and NOT offline mode to see if it's only the power-saving mode causing the issue!)
If I manually enter offline+power-save mode, and then try to return to on-line/non-power-save mode, relatively quickly, i.e.. Not over-night, everything is fine. It's only over night the problems start!
Any help?
Rob
PS. I also have the problem where using HSPA+ causes my phone to drop from the network and stop being able to receive/make phone calls. But disabling HSPA+ works around this for now, I think this problem is unrelated however.

I have a similar problem. My 808 PureView loses 70% of its charge overnight if I leave it in normal profile without power-saving. To deal with this issue, I started using the situations app to put the phone in power saving mode overnight. That solved the problem (although I never put my phone to offline mode). This is a weird problem because throughout the day my phone doesn't use 70% of charge, but it does overnight while doing nothing!
I have also experienced the second problem, losing cellular and internet connection, on my 808. I have started a thread to deal with this issue.
http://discussions.nokia.com/t5/Nseries-and-Symbian-Smartphones/Nokia-808-PureView-loses-cellular-an...
I believe it is a firmware bug that causes this problem.

Unable to turn on wifi power saving thinkpad t410

Hi --
I'm having a bit of trouble getting my wireless power-saving to work. I'm using TLP, which has a wireless power save option which I've set to "on". However, when I run iwconfig it appears power-saving is disabled:
wlan0 IEEE 802.11bgn ESSID:"dd-wrt"
Mode:Managed Frequency:2.412 GHz Access Point: 68:7F:74:08:05:81
Bit Rate=18 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr=2347 B Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=70/70 Signal level=-37 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:221 Missed beacon:0
When I try setting it manually I get an error:
sudo iwconfig wlan0 power on
Error for wireless request "Set Power Management" (8B2C) :
SET failed on device wlan0 ; Operation not supported.
Here's the relevant output of lspci:
03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller (rev 10)
I'm using the rtl8192se module, which has an option "ips" which enables link power saving. It defaults to "on", but I manually turned it on as well. Still no dice.
Does anyone have any ideas on how I can get wireless power-saving to work? Anyone with a thinkpad t410 had any luck?
Thanks in advance!

The realtek power saving feature does not work. At least I could never get it to work, nor could I ever find relevent documentation regarding powersaving on the device. It is kind of crappy IMO.

Power saving mode on then96 is driving me crazy

please can any help me i've had my n96 for 4 months and it seems to be playing up i can not change the brightness and the light time out as i go to change it it keeps saing that the power saving mode is enable and its driving me grazy

Every once in a while, my n96 would go into power saver mode when it wasn't supposed to and a screen would even come on and say " Power saving mode can not be disconnected ". Try charging the phone fully, and before removing the charger go into menu and try to set the light time out and brightness. If that fails, do a soft reset first, and if that doesn't work, do a hard reset. Make sure you back up all your contacts and photos. I had a couple of annoying problems with mine that wouldn't go away and I took this dudes advice on this forum to do the resets and now my phone is like brand new again. cheers, Rick *#7780# (restore) and *#7370#(reformat)

Saved Project is not visible/Accessible

I am using MS project 2010 Server. I created a project, saved it to the Project Server, it saved successfully. I closed the project and if I click retrieve the project from the project server option, my newly
saved project is not visible/accessible. What access do I need to see the project in Ms project Professional? Kindly note that the project is not Published.
If I try to open it from the cache (Recent items), it says
You do not have sufficient permissions to perform the requested action.
contact your server administrator.
Regards,

Indeed you should at least belong to the project manager group, assuming you're using the default security model with no tweaking. Since I understand you're not the admin of Project Server, I'd suggest that youdo a working session with the admin, identifying
which groups/categories you belong to and see which relevant permissions are missing (open project, save project...).
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

My Ipad crashed, so I pressed both power and home button, now I have to restart my ipad on the itunes, but there are some important info I cannot loose... how can I save this info at this time? actually is some info the I saved in the "notes" app! help!!!

My Ipad crashed, so I pressed both power and home button, now I have to restart my ipad on the itunes, but there are some important info I cannot loose... how can I save this info at this time? actually is some info the I saved in the "notes" app! help!!!

I Had it on my iPod, but I reset to factory settings and it got deleted :( If I find a way to get it back, I'll post it here so you can too.

Bootcamp 5.1.5621 - power saving not working

I've this mac: iMac 27 - mid 2010 - 11.3 : S/N CK0390HUDNR - Boot Rom IM112.0057.B01 - EFI 1.8 SMC 1.59F2
With latest bootcamp, power saving not working !
I enable the display power off after 10 minuts
Display power off BUT there's no way to power on !
Apple... any help ?? (hoping some apple tech looking discussions..)
Regards
Mauro

look on the page
it list which macs the zip support
if yours in not on the list use
is it on the list? Boot Camp Support Software 5.1.5621
or is it on this list Boot Camp Support Software 5.1.5640

When watching a video on youtube, if the monitor blanks for power saving, when it resumes, the video area is green (not refreshed) but the sound keeps playing.

Steps:
1. Video is correctly playing on youtube
2. Since I'm just watching and not pressing any key or moving the mouse, the display will blank for power saving after some minutes
3. I move the mouse to wake it
4. The video area is solid green, while the sound continues playing
5. If I switch tasks, the area from the other task gets painted over the video area, it seems like the video are is never refreshed after the suspend/wake

Hello,
Some problems with Flash video playback can be resolved by disabling hardware acceleration in your Flash Player settings. (See [[Flash Plugin - Keep it up to date and troubleshoot problems|this article]] for more information on using the Flash plugin in Firefox).
To disable hardware acceleration in Flash Player:
#Go to this [http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues Adobe Flash Player Help page].
#Right-click on the Flash Player logo on that page.
#Click on '''Settings''' in the context menu. The Adobe Flash Player Settings screen will open.
# Click on the icon at the bottom-left of the Adobe Flash Player Settings window to open the Display panel. <br/> <br/>[[Image:fpSettings1.PNG]] <br/>
# Remove the check mark from '''Enable hardware acceleration'''.
# Click '''Close''' to close the Adobe Flash Player Settings Window.
# Restart Firefox.
This [http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html Flash Player Help - Display Settings page] has more information on Flash Player hardware acceleration, if you're interested.
Does this solve the problem? Let us know.

M93p BIOS issue: PowerOff not correct if Enhanced Power Saving Mode Disabled and Wake on Lan Enabled

Hi Levnovo support team, Recently I bought a M93p tiny(10AAA05MTW)(BIOS revision FBKT56A)and installed with Ubuntu 13.10 myself.Then tried to enable wake on lan for my tiny. The followings are my test result. 1. Enhanced Power Saving Mode Enabled, no mateter what is Wake On Lan setting PowerOff system is OK. 2. Enhanced Power Saving Mode Disable and Wake On Lan Disabled PowerOff system is OK. 3. Enhanced Power Saving Mode Disabled and Wake On Lan Primary or Automatic PowerOff system is NG. When I tried to power off system, it always can poweroff(LEDs on front all off) then POWER ON again in 2 or 3 seconds. I cannot accept this test result ,system should poweroff not reboot again. It's really hard to understand why enabling Wake on Lan will affect power off function. I tried the same procedures with my another M92p(3212A16)(BIOS revision 9SKT70AUS), and it works well.

Did you ever get a fix for this?Having the same issue on 3 of 6 machines that just arrived.

Power Saving turn monitor off not working in XP Pro

Hi I just got a new 24" imac (the previous generation, white model)
In windows xp the screen saver works, but the power saving feature to save the monitor and turn it off does not work. Many other people are having this same problem but apple has not fixed it yet.
http://forums.macrumors.com/showthread.php?p=4295426
please help

I think I resolved this! I had the same issues you have been having for a few months. I am actually running Vista. Here is what I did...
1. While booted to Windows I uninstalled boot camp
2. Re-installed boot camp from Leopard DVD
3. Installed boot camp update 2.1 (downloaded from Apple support, i know this is for XP only, but I updated anyway.)
4. Downloaded the realtek drivers (high definition audio codecs) from http://www.realtek.com.tw/downloads/
5. DO NOT use the Realtek installer to install the drivers...instead extract the contents to a folder.
6. Go to the device manager, locate the High Definition Audio device and updated the drivers from here (point to the folder where you extracted the drivers).
I now have sound out of the rear jack!! Hope this help someone
Regards,
Blaine

Satellite P30: Power Saving does not work properly

Hello
I have a Toshiba Satellite P30 (with Windows XP) and I'm having problems with my Power Saving mode. When I use it for games and other high power applications it gets really hot on the edge of the moitor and shuts down.
It is been doing this for the last month or so. Before that there was absolutelly no problem. I've checked the TPSTrace file and got this error message:
A Fatal error has occurred. This program will be terminated. code: 0x0 Location:MainFrm.cpp(1317)
I don not know what to do with it and how to solve the problem. Any ideas?

Hi Thomas
It is not easy to give you any precise diagnostic but in my opinion your notebook is not hot because of power saver. Satellite P30 is pretty old notebook and maybe you should clean up your notebook.
Have you done this before?
This error seems to be serious and what you can do is to remove preinstalled power saver and after restart try to install it again.
Just for info: power saver tool is very useful but definitely not so important and your system can work well without it. Because of that I presume hot notebook is because of dust inside. With more CPU and graphic card activity hardware will be hot and it must be cooled properly. If the cooling grill is not clean this can not happen. at the beginning notebook will be hot but one day it will probably switch off without any warning.
At first step try to clean your notebook and remove all dust under cooling grill.

MOVED: P55 does not support power saving technologies with OC?

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=130839.0

Quote
I heard that when EIST, C1E is working, then the voltage is lower then 1v on 9x mode.
Since your OC'ing, Spread Spectrum should be disabled. Your particular CPU (whatever one it is), may require more than 1V. at 9X. The only power saving feature I usually use when OC'd is EIST, with C1E & C-State disabled. See how it does in that configuration. If you don't get any BSOD's or other problems, CPU V. on Auto should be fine.

Nokia 5130 mobile saved messages are not visble no...

Nokia 5130 mobile saved messages are not visble not but still show in memory details, my mobile just restrated and with i turn back it on my saved messsages were not visible please help on that

Try to check the saved messages in the sim card. You may also try a power cycle by turning the phone off, removing the battery and pressing the power button without the battery for 8-10 seconds. You can also do a soft reset by pressing Menu > Settings > Rest. factory sett. > Restore settings only so that it will bring back the phone to its original state.

N8: Power saving - Visibla or not visible

Similar Messages

Maybe you are looking for