N8 Problems with Maps and "Network connection requ...

I started with German O2 as my provider.
So at /Settings/Connectivity/Settings/Destination I found O2 MMS for "WAP services" an O2 Internet for "Internet".
Now I changed my provider and probably deleted both "Access point" Items.
When I'm starting OVI Maps I'll be always asked:
"Network connection required. Define access point to connect?"
And I can choose between:
O2 MMS (already deleted)
and web'n'walk (from t-mobile)
Why I can choose something, I already deleted it?
BTW: Problem exist from first version 011.012 till 013.016

Damn, just tried to post with IE9 but the forum doesn't seem to work on IE9 (final). So this time with Firefox...
@aspergerguy:
I tried both of these settings, non worked in my home network.
Sill I got a solution that works for me altough not everybody will be hapy with it:
I did a soft reset and now the A-GPS works fine again. I did that because i remembered that the problem appeared after I sent my self a config SMS from my service provider with the internet access settings. That somehow messed it up. Still I can't find a difference in the settings for A-GPS, but that doesn't matter to much to me now that it works
Getting all settings right again didn't take as long as finding the error...
The thing that would be nice to get working is push mail on OVI. But that seems to be a longer story

Similar Messages

  • Problems with printer and network connectivity

    So I've been using an HP B110a photosmart wireless e-all-in-one printer that I got with my macbook pro and at the start, everything worked perfectly in terms of wireless printing, ePrint, and AirPrint. But recently, when I try to print wirelessly, it says the printer is not connected and I also can't find it on the list of nearby printers on the 'add printer' window. I also had problems with printing via ePrint but those have cleared up (I don't know what was wrong but it's fine now). Printing with AirPrint on my iPod touch has stopped working as well because the printer doesn't show up when I search for nearby printers.
    Here's what I've checked/tried so far:
    All the wireless services are enabled on my printer and my mac
    I've reset the printing system on my mac, printer settings to factory defaults
    Restarted mac/printer/iPod
    Restarted router
    Reinstalled HP printing software that came with the printer
    All software is up to date
    Wireless printing on another windows computer does work
    Setting up wireless printing using the HP install disc doesn't work
    Trying to add a new printer using the HP software disc that came with the printer is unsuccessful in locating the printer as well.
    Printing over USB is problem-free
    When I tried restarting the printer/router, I could see the printer for just a few minutes in the 'add printer' list but then it would disappear from the list and the printer would be 'not connected' so I can't print wirelessly.
    More info
    MacBook Pro (13 inch, early 2011)
    Mac OS X Lion (10.7.2)
    HP Photosmart e-All-in-One B110a
    Router is a Huawei HG556a that I got from Vodafone NZ
    Thanks in advance!

    http://support.apple.com/kb/DL907

  • I have problems with mail and network connection?

    I am having problems connecting my Ipad to my network it always has the message I am not connected to the internet whenever I open safari.  I have an existing account and succesfully synched itunes already....

    Which browser & version are you using?
    Since I down loaded Yosemite
    Your profile is showing "iMac, Mac OS X (10.7.5). " 
    Conflicting info:  Please update/correct your profile so that you can receive the correct troubleshooting suggestions.  This will assist the users in trying to help you.  Thank you.

  • Homehub 3 problems with wifi and network - please ...

    I am hoping someone can help me, as I am struggling to work out why I am getting so many problems with my network at home.
    I have BT Infinity, and a Homehub 3A. I have had BT broadband for years. Infinity was added in Feb 2013. The HH3A is the original one supplied to me years ago.
    When Infinity was installed I also added a pair of TP Link powerline adapters, to provide a connection to an unmanaged network switch in the lounge.
    A rough outline of what I have connected to the router is:
    Wired
    - Synology NAS Diskstation
    - Win7 laptop
    - powerline adapter
    Wifi
    - 3 iphones
    - 2 ipads
    - Win7 laptop
    - 2 Win Vista laptops
    Powerline / network switch
    - Sonos bridge
    - TV
    - BluRay
    - Vodafone booster
    - SkyHD
    Recently I am getting a number of different problems:
    1) wifi drops to everything connected to the router, at the same time, all blue lights are on the router
    I lose wifi connection to the internet, from all devices, at the same time, but also the connection from my laptop to the NAS drops.
    2) Anything connected to the Powerline adapter is rarely available
    I try and connect to Sonos, or my sky box or the TV, but they aren't connected to the router. The lights on the powerline adapters indicate everything is fine, and the HH3 has all blue lights. But my iphone and laptop cannot find my Sonos. My iphone app cannot find my sky box. And on the TV it says it is not connected to the internet. To solve this problem I have to power cycle the pair of Powerline adapters.
    Some observations:
    1) these problems are all since Infinity was installed. I have no idea if that is relevant.
    2) My NAS Diskstation has a powersave mode. I noticed last night that when I woke it up, the powerline adapters disconnected briefly, before reconnecting. But when they did reconnect I could not access anything connected to them. It was as if the NAS had booted them off the network, and then they couldn't get back on.
    3) I run a 10m brand new Cat5e cable from the infinity modem to my router, because the modem is in the garage.
    Can anyone help? I am tearing my hair out with this.
    Thanks for any help.

    If you set the devices on the home hub to always use the same IP address, then that can help.
    The problem is that when the DHCP lease expires, the home hub often gives the device a different IP address, and this breaks the port forwarding rules.
    Some routers allow you to specify which IP addresses are to be reserved, but the home hub does not.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Problems with internet sharing/network connection/ethernet and XBOX 360

    So basically I have a sent my Mac Book Pro 13" (Snow Leopard) away to be fixed, and in return I got a loan Mac Book Pro 15" (Lion). In the two weeks my Mac book was away getting fixed I purchased an XBOX 360, because of my location I am unable to use wireless on my XBOX, so instead I connect the loan Mac Book to the XBOX 360 via network cable.
    This worked fine and I could now connect to XBOX Live and be on the Mac Book at the same time.
    So today my Mac Book (13") is returned, I connect everything up exactly the same also changing the settings on internet sharing making sure that it can be used to send the connection to other devices via ethernet.
    But it just wont connect.
    The XBOX doesnt find the connection like it did before, and it also doesnt register on the MAC Book either.
    I've tried different cables, the same cable I used where it worked before.
    I've tried turning of Virus protection.
    Both still at both ends it is not registering a connection, I have used this Mac Book before through a network cable so I dont think there is a problem there, to my knowledge everything is the same as I did on the other Mac Book but this one does work.
    Have you any advice or tips on how to get this to work?
    Thanks for your time.

    What I did to get my network running again (although I still haven't found out why DHCP has stopped working):
    1. Open the Control Panel of the computer that's trying to connect to the network (not the computer sharing the internet connection)
    2. Go to 'Network' panel, and select the AirPort connection
    3. Under the 'TCP/IP' tab, change 'Configure IPv4' pull-down menu from 'Using DHCP' to 'Manually'.
    4. Enter an IP address between 10.0.2.2 and 10.0.2.256 (I randomly chose 10.0.2.40), a Subnet Mask of 255.255.255.0, and enter 10.0.2.1 in the Router box.
    5. Click "Apply now"
    The computer should now be connected to the network, and able to access the internet. If not, you may need to manually enter a DNS server - put '4.2.2.1' (or an IP for a DNS server provided by your ISP) into the 'DNS Servers' box.
    You need to do that process for each computer you're trying to connect to the shared network, making sure you enter a different IP Address for each.

  • Problems with graphics and Internet connection - iMac 2011 with Lion

    First: sorry about my english... It is terrible! lol
    I have an 2011 iMac, purchased in June 2011 in the USA. I brought the iMac to Brazil.
    Sometimes when I turn on my iMac, the graphics are horrible and can not connect to the Internet. When this happens, I have to restart the Lion.
    Apple introduced the "iMac FW Graphic Update 3.0". The information says clearly that supports Brazilian Portuguese. Butwhen I install, an error appears: "this software is not compatible with your system".
    My Lion is in Brazilian Portuguese. Why it is not compatible? How do I install it? How can I solve this problem?
    Note: The technical assistance of Apple changed the HD, according to recall made ​​by Apple through the site. The HD is new.
    Thank you very much!

    Anybody? I'm buying a new network card simply but I'm not sure that it is the network card that is causing the network problems I'm experiencing.
    Regards
    André

  • [SOLVED]problem with GNOME and wireless connection

    Hi!
    I'm new to Arch Linux, and have run into a few problems after installation.
    My computer is a HP Pavilion dv6000.
    I installed using "xf86-video-nouveau" driver, as i understand this is the best choice for "Nvidia Geforce Go 7400". Is it?
    I also installed the complete "gnome", "gnome-extra", "gdm", "gnome-tweak-tool" and "gnome-shell-extensions" packages, but when I boot into gdm login, it automatically starts in fallback mode (the one who has "applications" and "places" in the top panel instead of "activities". What am I doing wrong here?
    Btw, when I go to System settings - system info - graphics, there are three lines; "Driver", "Experience", "Forced Fallback Mode". "Driver" line only says driver, and is blank after. "Experience" line says "Fallback".  "Forced Fallback Mode" is set to OFF.
    Also, I cannot figure out how to get my wireless network set up correctly.
    When i open System Settings - Network, I get an error saying System network is not compatible with this version.
    Any help with this woill be greatly appreciated!
    $ iwconfig
    lo        no wireless extensions.
    wlan0     IEEE 802.11abg  ESSID:off/any 
              Mode:Managed  Access Point: Not-Associated   Tx-Power=0 dBm   
              Retry  long limit:7   RTS thr:off   Fragment thr:off
              Power Management:on
    eth0      no wireless extensions.
    Last edited by pkuvaas (2012-01-18 21:57:46)

    pkuvaas wrote:
    Thanks!
    -dri driver worked. But if the NVIDIA driver works better, I should probably consider using that one.
    I tried to install the NVIDIA binary driver, but when i tried to run
    # chmod -X NVIDIA-Linux-x86-290.10.run
    # ./NVIDIA-Linux-x86-290.10.run
    I got a message telling me to close x first.
    How can I do this?
    Ho ho ho buddy, I see you're trying to install the nvidia driver from the website. Have another look here:
    https://wiki.archlinux.org/index.php/Nvidia#Installing
    the drivers are available through pacman Installing the driver through pacman will automatically take care of removing things that conflict and installing things you need to ge t the NVIDIA driver to work.
    NVIDIA _might_ be better, 3d support in nouveau is still somewhat experimental and nouveau doesn't have all the power management features yet. It'll be something to experiment with. Have a good read of the NVIDIA and NOUVEAU wiki articles
    pkuvaas wrote:
    As for the wireless issue, I googled around a bit and found that the driver I need is ilw3945.
    I added this to /etc/rc.conf:
    DAEMONS=(...ilw3945...)
    as it seems the drivers are included in udev.
    However, when i try to open System Settings -> Network, it says
    The system network services are not compatible with this version.
    So I'm getting a little restless to find out what I can do to get the wireless network configurated properly, and how I can do it.
    Any ideas?
    First I think you've fundamentally misunderstood something. Drivers for linux come in module form, not in DAEMON form. A DAEMON is an application that runs in the background (sound server, network service, etc etc).
    ilw3945 would have to be added to your MODULES section in /etc/rc.conf if that is the module you need.
    humor me and post the output of this command:
    $ lspci

  • Problem with sound and network card

    when my mainboard broke down i received other mainboard - 845PE Max - but i didn't get drives to it. Sometimes sound screeched but it worked fine till I reinstall windows. I had to download drives by Live Update, and after i downloaded it all sound screeched allmost every time, especially when i do something (click, close window etc.). It looks that sound work worse when processor is more busy. I tried to reinstall drives, but i didn't change anything. I have 2.1 speaker system, and it worked fine at old mainboard. I have win XP professional SP2, and it doesn't see any problem, and onboard realtek sound. Anyone know what can be a reason??

    I did get some disturbing backround noise after updating latest audiodriver for my 865pe v.1 board (C-Media 9739A) ,from Live update.
    Tried some different settings, but did not solve the problem, so I installed my
    Creative SB Live 5.1 pci-card with latest drivers, instead of going back to old driver - and now I´m happy again and got better sound as well in my 2.1 speakers.
    Try to find an older driver and see if problem go away ( pitty you don´t have the original MB CD drivers ) or buy a “cheap” audio pci-card, which probably will give better sound as well compared to on-board.
    ( you may have to disable on board sound in bios first )

  • HT204409 Having problem with wifi and Bluetooth connectivity after upgrading my iphone 5 to iOS 7.0.2

    Overheated while charging

    I am having the SAME problems on my 5s. I cant send picture texts to androids but I can to iphones. I have tried turning off/on wifi, resetting networks settings, re-added them as a contact, and turned off imessaging, and yes mms is enabled! Nothing works!!
    APPLE FIX THIS!!!!!!

  • Problem with list and map in GWT

    I have a problem with map and list in GWT. I need to put a map in to a list but GWT does not support ArrayList and HashMap since they are not serialized types.
    Exactly I want to create following list with out using ArrayList and HashMap
    ArrayList<HashMap<String, Object>> map = new ArrayList<HashMap<String,Object>>(); Thank you for new ideas,
    Regards

    If try to use ArrayList then I receive following exception when I make a rpc call.
    Caused by: com.google.gwt.user.client.rpc.SerializationException: Type 'java.util.ArrayList' was not included in the set of types which can be serialized by this SerializationPolicy or its Class object could not be loaded. For security purposes, this type will not be serialized.:

  • I have I.O.S. 6.0.1 and i live in Georgia, Tbilisi. I have got the problem with maps. It does not get directions. Per exemple it was working in italy but in my cuntry it does not work. Could u explain me what can i do to make my maps work in Georgia?

    I have I.O.S. 6.0.1 and i live in Georgia, Tbilisi. I have got the problem with maps. It does not get directions. Per exemple it was working in italy but in my cuntry it does not work. Could u explain me what can i do to make my maps work in Georgia?
    Thank u

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"

  • Problem with Map Loader 3.0.28.0 and 5800XM

    Hi all, i have a problem with maps upload to my mobile, whenever i start Map Loader i see a message: You have connected at least one phone (Soft) without a Maps drive. Either you are using an old Map version - .. - or have never started your Maps application... I use USB PC-Suite mode, I have had run Maps application on my phone before i try to connect Map Loader, the Maps version installed on the phone is v3.03 10wk01 b05 - so that's obviously not a reason!! Now i can't install new maps anymore - i just can click this error window away and choose some maps, they would be downloaded from the Internet, but  they would not appear on my mobile! With a previous version of the map loader (don't know the version number any more, and previous maps version on the phone, i have no problem)            I also need a link to Maps Updater due the Nokia site malfunction - couldn't find this software anymore.... sorry my poor english :-)
    Nokia users - the biggest beta test community of the world!

    Problem solved! The STUPID software searchs for ALL mass storage devices attached to your computer, so I got error messages all the time until I unplug my USB Hard drive.    
    Thank you Nokia guys, your were great help by solving this problem   .....  
    By the way,  the STUPID software doesn't shows the maps that would be all ready installed on the phone, and you couldn't say that the upload of the maps was really successful  until you waisting your time watching the progress bar to the end.
      I wouldn't be suprise if you can install the same map twice so it takes the twice space....
    regards, and sorry for my poor english
    Nokia users - the biggest beta test community of the world!

  • Problems with AOL IMAP server connection on my BlackBerry Z10 STL100-3, and BB PlayBook 64GB WiFi

    Problems with AOL IMAP server connection on my BlackBerry Z10 STL100-3, and BB PlayBook 64GB WiFi
    Thursday 4:20am EST, 02-19-2015
    Hi, My connection to the AOL IMAP server has suddenly failed - Says "Not Connected" on Accounts page
    I haven't changed anything and this just started failing this morning.
    I've saw same issue on my Blackberry PlayBook 64GB.
    Is anyone else recently experiencing AOL IMAP Errors?
    Solved!
    Go to Solution.

    Yes! Same thing happened suddenly to my Z10 this morning. No AOL. 

  • Problem with maps on e72

    Hi everyone
    I've got a problem with maps on my E72.
    I've seen advert that Nokia is going to let everyone use maps for free on selected models.
    I was going to buy Sat Nav for whole Europe as I travel a lot and I was going to change my old N95. I thought I could do both in one new phone. Checked all the available models and chose E72. It said it;s got GPS and you don't need to use your network and spend fortune on internet connection. Got it from eBay for £270.
    I installed Ovi Maps from internet and the first thing that surprised me was it had 'only' 7-8MB.
    I thought that something was wrong, maps for 72 countries couldn't be 8MB big.
    After some time I managed to set my e72 up. Put my Maps on and...
    It takes loads of time to find GPS connection, but the worst thing is if I type lets say Paris it doesn't find anything. Map has wholes, like suddenly the roads end and there's nothing there.
    My question is what am I doing wrong? Do I need to download something more? I didn't have any maps on my phone when I bought it. Where can I find them?
    If someone could help I'd appreciate it.
    Thanks a lot.

    I forgot to mention that when I choose a destination it keeps saying Calculating route all the time. I waited about 15 minutesand it didn't calculate anything.

  • Problem with Send and Receive Emal In SAP System

    Hi gurus!
    I have a following quote:
    Dear !
    I have a problem with send and receive email in SAP system following :
    I want to test send and receive email in local network at my company. I
    had two server
    Server 1 : I setup Exchange Mail Server 2007 with domain controller is
    fes.com
    Server 2 : I setup SAP ERP ECC 6.0
    On Server 1 : I created 2 account ( u1Afes.com and u2Afes.com ) and then I tested send and receive email between u1 and u2 in local network through Microsoft Outlook 2007 -> OK
    and then
    On Server 2: I had configured send and receive email on SAP system
    through tcode SBWP, SCOT and SOST as Note 455140 - "Configuration of
    e-mail, fax, paging or SMS using SMTP"
    for example :
    I logged in SAP system with user Basis01 (with email u1Afes.com ) -> then,using tcode SBWP -> new message -> send to u2Afes.com with Internet Mail type and then status message with green light -> sending ok
    and then I have used Microsoft Outlook 2007, I logged with account u2 ->check email -> Ok. I saw message which send from u1
    Finally, My problem is how can receive mail in SAP system without using Microsoft Outlook
    For example:
    Login system SAP with Basis01 account (with  u1Afes.com ) -> tcode SBWP ->New Message -> send to u2Afes.com
    and then
    Login system SAP with Basis02 account (with u2Afes.com ) -> tcode ??? ->
    To receive email from Basis01 (with u1Afes.com )
    Please help me now
    Thanks
    I replace "@" with "A" because of banning email of this forum.
    This quote is about sending email in local network. And we can't receive any email from the outside email address. Addition if I wanna send email to internal email in Internet (we've just tried with email address in local network) What should I config in SAP and Exchange ?
    By the way, Is SAP Server IP added to Relay Agent for sending or receiving mail ?
    Regards
    An NLP
    Edited by: An NLP on Apr 6, 2010 7:03 PM

    Hi,
    This problem is a classic problem of mail routing via Exchange. Exchange like most mail servers use the domain part of the email address as a means to route mails. So I will make an assumption that your main company mail addrss is "User @ fes.com".
    So when you send a mail to the "User @ fes.com mail" address the mail is delivered to your Outlook mail address as this is the default route for company.
    (Q) So how do you get your Exchange server to relay the mail into the sending SAP system?
    (A) The easiest way would be to setup and unique mail domain for your SAP system. I always recommend "user @ client.sid.company.com" which in your case would be "u1 @ 100.PRD.fes.com". You can then instruct Exchange to send any emails addressed to 100.PRD.fes.com domain to your SAP system. Also using this format of address you can configure multiple mail connections into multiple SAP systems.
    (A) Another answer would be to enter the "Full" email address (LOcal and Domain part of address) into the routing rule for Exchange e.g. "U1 @ fes.com" so that all emails addressed to this user will be delivered into SAP. However this method requires a lot of Admin as you will have to update Exchange with ALL email address that need to receive emails. Also if your corporate mail address is "U1 @ fes.com" then all mails will be forwarded to SAP.
    I would definitely NOT recommend this method but the decision is up to you.
    P.S. The IP address of the SAP system is entered into the mail header of the email. This is standard practice in SMTP relay. You can suppress this header in Exchange
    Hope this helps
    Michael

Maybe you are looking for