N8: SMS client shuts down when typing "certain" l...

Some users in the italian forum are experiencing shuts down of he SMS "client "when typing not better identified letters . Furthermore, after this, the keyboard sometimes starts typing wrong letters ( ex. press "A" and get "E").
Some similar experience and what's important any explanation?

I've experienced this bug few times myself. Usually restart solves the problem. Annoying though.

Similar Messages

SAP shuts down when executing certain transactions

Hi,
When using the SAP system, I realized that when using some transactions (ex: WE41), the system shuts down automatically. This happens every time for the same transactions.
Any idea why ?
Thanks a lot

Hello Stephanie
1 too old sapgui version
2 too old sapgui patch level
3 physical memory problem
4 software memory leak
5 other hardware problems...
Please look at the users sapworkdir. Are there any *err.trc files?
For this kind of problems it is better to open an "OSS" message.
best regards, Sven

Machine shuts down when a certain USB port is used...................help!

Dell Optiplex 760 (Win Vista Business) shuts down as soon as the second from the top USB port is plugged into on the back, bottom two (2) work fine and both front do as well. What could be causing this?

Is it always the same device being connected to that USB port causing the shutdown, or is it any USB device?
Physically examine the port on the rear of PC to see if it's bent or otherwise damaged. And if it's only one device causing the crashes, examine it's USB cable or connector too.

Reader X shuts down when trying to open more than one pdf, or when clicking certain categories in settings

Until a few weeks ago I have never had a problem opening more than one pdf at a time. Now Reader just shuts down when I try to do so. The same thing happens when I click on the yellow highlighted categories in settings. All the other categories open fine.
Appreciate the help of anyone who can help me solve this.

I guess you didn't know, but yes you can close more than one app at a time. You can close up to 3 apps at a time in the new IOS7 on the iPhone. Try opening at least 3 apps and then double click the main button to see what apps are opened. Then swipe to the left to see the three of them on your screen. Your not gonna see the ones on the side entirely but you can still put all three fingers on them, then simply swipe them up and it closes them up.
The thing is, when you have let say 10 apps open, and you start using this trick, some of them will stay open meaning you swiped them up to close them down but the bottom icon stays there. When you come back to your main IOS desktop and then go back to close the programs that you have opened, you can see that those apps are still opened. There is only like 2 or three out of all the 10 you had opened that stayed open, but none the less it's a bug in the system I presume.
You also asked about the icon at the bottom. When you are seeing what apps are opened, there is always a small icon at the bottom and on top you have a representation of what you were working on, and that is the part you swipe up. But often time the bottom icon will stay opened after swiping 2 or 3 of the apps to close them.

My Satellite laptop (A305) shuts down when run on the AC charger/adapter

The problem is that my Toshiba _A300 series laptop (A305) shuts down when you try to run it on the AC charger/adapter_. You can boot it with the power cord plugged in and it will get to Windows Desktop and maybe a few minutes more at most before shutting off.
It will boot and _run from battery without problem_, but if you plug in the AC while it is up and running on battery the machine will normally click off instantly and reboot to the message "Windows was not shut down correctly."
The _AC adapter works fine_ reading a steady 19.19 to 19.20 volts with a voltmeter. It also _charges the battery fine when the computer is off_. I have two Toshiba brand batteries and they both work fine.
One interesting thing is that the _computer runs fine on AC when in safe mode_.
I _did a reformat/factory restore_ of Vista to assure it was not software and drivers, and still got the same problem before any external devices had been plugged in.
It has the latest BIOS and I tried resetting it to default values in case anything had gotten changed. It made no difference.
This is _not a heating issue_ because _while it is run on battery I can watch long videos_ without it shutting off. I ran compressed air through the vents just to make sure, but it makes no difference in behavior. Usually with an overheating shut-off, the computer cannot be started until it has cooled some, but these shutdowns are accompanied by an instant reboot.
I have seen on some threads that this type of problem one can work around by disabling one of the processors in Device Manager, but I don't think that is much of a lasting solution or good for the computer.
Has anyone seen this problem before and have you come with a full diagnosis of the problem and a real solution?

I have Satellite A300 and until now everything works OK.
I would like to know what happen when you remove the battery and use notebook with power supply only. Does notebook shuts down again.
If not let OS run and put the battery.
Is the battery recognized properly? Does notebook switch off again?
To be honest I cannot imagine this issue has something with software or background processes. Recovery image you got with your notebook is designed for this certain notebook mode. Recovery image is tested and I dont think preinstalled OS has anything to do with this.
Full diagnosis?
And how to do this? You know very well that diagnosis can be done with diagnostic tools only and such tools have services only. I hope you will find answers but Im 99% sure there is nothing you can do about that. Maybe you should contact service, explain the situation and ask for help.

IMac shuts down when using Safari 2.0.4

My iMac shuts down when I visit certain websites such as Pogo or video sites. Took it to the Apple store and of course the problem wouldn't replicate there. They kept it to check out the scripts and logs to see if they could find a problem - without success; although they did suggest my house is haunted. Brought it home and it quit again.
We thought perhaps we were getting interference from other wireless devices and unplugged our cordless phone which worked for a day. The computer always turns back on so its more of an annoyance than a real problem, but I'm baffled.
It also happened once when I was downloading from the iTunes store, but is most prevalent with Safari.
We have wireless internet connected via ethernet to an Airport Express.
Any ideas? Thanks.
iMac G5 Mac OS X (10.4.10)

Hi Barry -
Yes I do live near a ghost town (kinda) - Virginia City, NV. And I did tell any unwanted visitors to leave.
Actually, in the last year, they have replaced the Super drive, power supply, inverter and logic board. The only reason I'm not thinking power issues is that it only happens when I'm in Safari or iTunes. I would use Firefox except I've got java issues with that. I can (and do) use the machine for other things all day long without problems. I can use Safari all day long as long as I'm not playing on Pogo or certain video sites. Maybe Pogo is haunted?
It also doesn't happen on my husband's iMac on the other side of the house. Is there something that could cause enough interference to actually make the machine shut down? Oh, the antennae for the satellite TV and internet are on the roof directly above me, if that would have anything to do with it.
Thanks for your help.

Why doesn't com.apple.IE.client.exeshut down when Mobile Me finishes sync?

Since upgrading to iTunes 9.1.0.74 a couple of days ago, the com.apple.IE.client.exe process, which starts during the Calendars phase of a Mobile Me manual sync process, fails to shut down when the sync process is complete. The Calendars phase now runs 5-10 minutes even when there are no Calendar changes. While it runs, com.apple.IE.client.exe runs at 50% of the CPU, and memory usage climbs continuously. It reaches about 2 GB (2,000,000 K in Windows Task Manager!) by the time the sync process completes.
However, com.apple.IE.client.exe _doesn't end_ even though the sync is complete. Instead, it keeps running at 50% CPU. Somewhere around 2.1 to 2.2 GB of memory usage it reports: "com.apple.IE.client.exe - Application Error. The exception Breakpoint. A breakpoint has been reached. (0x80000003) occurred in the application at location 0x0c90120E."
This has occurred at the end of four Mobile Me syncs now. Upon selecting OK to end the application, everything else seems fine.
I see other posts regarding the com.apple.IE.client.exe process in the latest iTunes update, but no clear resolution. I tried Apple Mobile Me chat, and replicated the problem twice while on-line, but their only recommendation (after verifying that my only Outlook COM add-on is the iTunes add-on) was to reinstall iTunes and Mobile Me, and if that didn't work, to create another user and see if the sync problem occurred there. Since that user would have no Outlook data to sync, this suggestion wasn't very helpful.

As am experiment, I just ran a Mobile Me manual sync, but first I de-selected Bookmarks, and synced just Contacts and Calendars. com.apple.IE.client.exe did NOT start at the beginning of the Calendars sync phase (as it had in the four previous syncs since upgrading to iTunes 9.1.0.79). In fact, it did not start at all, the Calendars sync phase finished quickly and the entire sync process finished in less than a minute.
The apparent conclusion is that com.apple.IE.client.exe is used to sync IE bookmarks with Mobile Me, it starts (for some unknown reason) at the beginning of the Calendars sync phase if Bookmarks are being synced (not at the beginning of the Bookmarks sync phase), it delays the Calendars sync phase significantly (but not the Bookmarks sync phase), and it has some sort of serious memory leak problem that balloons its memory usage past 2 GB.

Macbook only shuts down when battery is flat and date and time revert to 2008

Hey Guys
My Macbook only shuts down when the battery goes flat.
When I switch it back on everything seems to be fine though the date and time are incorrect. Seems to go to default date which is 2008.
Other things seem to affect my browser, Facebook won't login properly and certain websites seem to propmt that the website can't be trusted, which is strange because gmail is one of them and should be fine.
Appreciate all the help from you cyber friendly folks!
My system specs
2.2 Ghz
4GB
MAC OS X Version 10.6.8

To answer your questions in sequence:
1) You can't, really: the symptoms your Mac is exhibiting point at a loose or next-to-dead back-up battery. Only way to find out is to test it, and to do that, you must open your machine, locate the battery and test it with a battery tester (see here for more info on how to open your Mac; make sure to select the right model)
2) It's actually the opposite: when you must use your Mac on the battery, well, then, do it, but if you're sitting at your desk, or, like me, on your sofa, with your MBP on your lap, simply keep it plugged into the main.
An additional measure to preserve your battery, that applies less to the recent Unibody design, but is helpful for ealier adopters of the MacBook Pro: don't leave your machine plugged in when it's turned off; it prevents a slow, natural depletion of the battery, and will play against you in the long run.
Last but not least: battery calibration is required once a month for older MacBook Pro models (non-Unibody, basically). If your machine belongs to that era kids the age of Justin B. don't even imagine ever existed, check here.

Photo Elements 12 editor shuts down when I select enhance Photomerge Panorama I am using Mac Book Pro with Yosemite operating system.

Photo Elements 12 editor shuts down when I select enhance>Photomerge>Panorama. I am using Mac Book Pro with Yosemite operating system. Otherwise, the program preforms properly. Any suggestions?

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

IPhoto shuts down when importing pictures

For an unknown reason, iPhoto suddenly shuts down when I try to import pictures. I have been using this camera for over two years, so that can't be the problem. I have tried to restart my laptop, but nothing seems to help. Please help, need to mail pictures (that are still on my camera..) to some clients asap...

Is the error you're getting in the permissions repair or disk verify/repair? If it's the latter then boot into your system install disk, and in the first window after the language selection go to the Utilities menu and select Disk Utility. Then repair the disk and repeat until it reports no repairs were made. Then repair disk permissions again. Boot back into your PB.
I'd also download and run BatChmod on the iPhoto Library folder with the settings shown here, substituting your account name for mine. You can either type in the path to the folder or just drag the folder into that field. This will definitely force set the access on your library folder and its contents to your complete access. That may help. It's helped others.
Yes. It's possible to reinstall 6.0. If you do, move the iPhoto_602.pkg from your HD/Library/Receipts folder to the desktop. Then delete any other receipt files with iPhoto in the name. That iPhoto_602.pkg file is the 6.0.2 updater if you want to update to that version. Also delete the current application and then run the installer.

MacBook shuts down when closed

It's connected to power and I don't understand why it keeps shutting down when I close the computer. I just want it to sleep. Is there some sort of setting I need to adjust? I've looked everywhere.
TIA

I am having a similar problem, I have looked for settings that could be adjusted. I did not changed any settings previous to the problem starting. When I open the lid the keyboard is lit but the computer does not respond to mouse clicks or typing, the sleep light is off. I have to hold the on/off button until the keyboard goes out then turn the computer back on.

Pre Turns Off or Shuts Down when I close the keyboard

Is my pre screwed or is it OS?
It shuts off, not the version that other people have had where you have to pop the battery (the power button still works to turn it back on) out to get it to restart. Anyway, it shuts off when I slide it closed. I thought maybe something loose so I did it very slowly, not allowing it to even go all the way, the minute that the sensor tripped it back into "no keyboard" mode it turns off.
It's especially bad when on bluetooth...happens every single time.
Is there a solution for this. Please palm, a lot of people are having this problem and there is no answer yet?
Post relates to: Pre p100eww (Sprint)

Palm is on deathwatch. The Pre could have really kept them afloat, but there are too many problems with it. When I first got my Pre in June, it was awesome! Everything worked great. But now, I am always having problems with it. Here is the list:
1. Pre turns off or shuts down when I close the keyboard. (I had to make this one the first on the list since it is the topic.)
2. Pre turn off or shuts down for no apparent reason and the only solution is to remove the battery, wait a second, put the battery back in, then turn it back on. This takes forever. Plus, because I have removed the back so often, my Pre squeaks when I am typing (from the plastic). It is very annoying.
3. The navigation system has a glitch where most of the time, it cannot find my current location. The message says to make sure I am in clear view of the sky, but i always am. There are many posts about this problem in other sections. There are some solutions, and the often work, but it takes 5 minutes to reset the system. It is a beating.
4. The navigation system voice is usually very clear, but sometimes, the voice will skip over the names of streets as she is calling out the directions. Ex. "Turn right on ________ Drive."
5. Sometimes the keyboard will stop working. I have to remove/replace the battery. Again, this is time-consuming and further contributes to the squeaking problem when typing because you have removed the back so many times.
I like Sprint because I can get unlimited data, txt, and mobile-to-mobile calling for $70/mo. So, I hope that someone comes out with a great touch-screen phone (not the BB Storm), because I want to stick with Sprint. If you go with an iphone, you have to get AT&T, which will cost you at least $100 for the same. That is a $360/yr difference! I am sticking with Sprint.

MacBook shuts down when not connected to power supply

Hey everyone, I'm making this topic for an issue that has gotten me edgy lately.
My MacBook (not new) has a habit on shutting down on me instantly for some reason when the MacBook is not plugged into charge. Here is the strange thing though, if I unplug the charger plug and set it still on my desk, I have more of a chance of the laptop not failing on me, but when I carry the MacBook around, it has a 90% (guestimate) chance of shutting down on me.
Even after having the laptop plugged in for 12 hours, the laptop just goes into suspend mode.
I have to wait a couple of seconds before I can turn it back on (by pressing the power button, not any key).
Also, when I shut down more programs at certain times when not plugged in, and having the screen brightness low, the Mac does not shut down so fast.
Any advice?!
Thanks
Message was edited by: Biz Bizzle

Could be you battery. Mine shuts down when showing 40% charge left and I have to plug it into the power supply to fix it. I found out it was the battery by downloading coconut battery. It's an application that allows you to check the status of your battery (Link at bottom). I suggest you get that and when your macbook shuts down again, plug it into the mains, start it up and run coconut battery. If it shows your nearly out of battery power then that's your problem.
I was showing 40% left when it shut down. Did the above and I had no power left. It happens when the battery is old about 250-400 loadcycles
Hope this helps.
http://www.coconut-flavour.com/coconutbattery/index.html

My older iMac running Mavericks 10.9.4 shuts down when it connects to the internet. Resetting the SMC doesn't help. What can I do?

My older iMac running Mavericks 10.9.4 shuts down when it connects to the internet. Resetting the SMC doesn't help. What can I do?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Imovie shuts down when sharing to browser

Please help me, i've been cutting film for months with imo09 like steven spielberg, now all of a sudden like thousands of others, imovie shuts down when i add titles or share it to the media browser.
I will try these suggestion from the apple community help for the titles:
rename projeckt
press apple and S to save before clicking add titles
erase pref files
log on as a new user
But what can i do if it doesnt share to media browser. It looks like the film is being sent, takes several minutes, then at the last second shuts down.
At this moment i take the baseball bat in my hand and have the urge to swing like Derek Jeter at my mac.
please help me!

Hi Sue,
recently. I also got the same problem abt iMovie HD and while searching the discussions, I have seen your suggestion for similar problem.. I followed it and now it is working very well.
Thank You..
I have another problem in my mac. There is a white vertical line showing up on the desktop for a while.. and recently another white line parallel to it also created and now I have 4 vertical lines on desktop which spoils the beauty of the mac. Do you know how to get rid of them? Mine is iMac, 10.4.9, 1.83GHz, Intel core Duo, 1GB memory.
Your suggestion will be greatly appreciated. My e-mail ID is [email protected]
Thank You
Murthy
iMac4, 1 Mac OS X (10.4.7) Intel Core Duo
iMac4, 1 Mac OS X (10.4.7) Intel Core Duo
Welcome to discussions, viewfinder:)
Be certain to follow Bengt's good advice:
Quit iMovie.
Locate a file named com.apple.iMovie.plist and get
rid of it. iMovie will create a new one the next
time it runs. Empty the trash and run a permissions
repair from the Disk Utility folder.
The files are located here:
-->/Users/YourName**/Library/Preferences/com.apple.iM
vie.plist
Also, please answer regarding the amount of free
space you have left on the Mac.
:)Sue
iMac4, 1 Mac OS X (10.4.7) Intel Core Duo

N8: SMS client shuts down when typing "certain" l...

Similar Messages

Maybe you are looking for