N8 software update failed and N8 not starting... :...

hi,
plz help asap!...
newly bought N8 yesterday 4th april 2011 and today night i was updating to the latest firmware.
Ovi suite after backing up and downloading the firmware... it started installing.
then suddenly it throwed the error...like connection lost with device, press power button for 10seconds and continue installing. But it never wokred after continous attempts.
PLZ help asap... i am getting frustrated and gone out of mind... not even experieced the N8 before that it has become dead piece...not able to start or anything..
refer attached screenshots/images
Attachments:
msg1.jpg ‏79 KB
msg2.jpg ‏71 KB

@santoshhs
Welcome to the forum!
Question is now is N8 on/off, you need to try depressing power button for 8 seconds until you feel 3 vibrations (this is same as removing battery)?
As a last resort as precursor to returning device you probably need to try a three button depressed power on "hard reset", although if successful all data would be erased from device with some media consequences not all recoverable unfortunately.
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

Software Updates Missing and File Not opening in Final Cut Pro

Hi Experts,
I am having trouble with Final Cut Pro. Here goes:-
I tried to load up a FCP file called "Overview" in Lesson One of the Apple Pro Training Series book called "Color". The file would not open and I got the following message alert in FCP:
"File's format is too new for this version of the application".
I am running FCP 6.0.1 and so went to check for software updates. I could not find any listed for FCP. I did a quick internet search to make sure and found there were indeed updates to 6.0.1.
So I guess I have 2 problems:
1. Why won't a file from a book that was published before I bought FCP work on my app?
2. Why can't I see updates for FCP in the Software Update application?
I am mega stuck with this. I have read of similar problems to mine on the internet but have found no solution. I hope that you will be able to help me out.
Thank you all,
Bob

Hi Nick!
Thanks for your reply. I feel kinda silly now but I have been continuously checking Software Update for 24hrs and I just got a new addition to the list which was called "Pro Applications Update 2008-05".
Seeing something new, I installed it and it upgraded my Final Cut Applications including FCP to version 6.0.5.
The file then opened.
I am truly sorry to have taken your time up. As when I posted last time Nick, you were very prompt and helpful.
All the best,
This problem is solved for me and I hope all the other people having this problem find this update as luckily as I just did.
Bob

IPod Nano 7th gen - software update error and now not functioning

Hello,
I recently plugged an older 7th gen iPod Nano that I hadn't used in a while into my computer (Windows 7 operating system) and iTunes wanted me to let it update its software. I said 'yes,' not really thining anything of it, and as the software update was taking place, an 'unexpected error' occurred. Now my iPod will not turn on or respond or anything. It shut off while plugged into the computer and has stayed off and I am unable to get it to turn back on. It is totally dead, like the failed update somehow ruined my iPod.
The iPod itself was a little damaged - the LCD touchscreen was nonfunctioning due to water damage, and only displayed a white screen when on, but I could still 'shake to shuffle' and it would play all of my music just fine. Now the iPod will not work at all.
Is there anything that can be done or am I just out of luck here? Did the fact that the iPod was damaged have something to do with the failed update?
I'm kind of bummed 'cause the iPod still played my music perfectly....
Thanks for any help or insights anybody can give.

I should add 2 important points: 1) I have no trouble syncing with my PC, just in updating the nano software, and (2) Buried in some Apple reference I found mention of problems if the nano isn't formatted for a PC vs. Mac. It gives info on how to tell what the format is, but it's outdated (the menu choices are different). I believe it is already formatted for a PC because of an entry under Settings/About which says the Version is "1.0 PC". Tell me if I'm wrong. Also, it would help me if I knew the destination of the software download. Does it download directly to the Nano or to a temporary folder on my PC?

Nokia 6300 software update failed phone will not s...

i tried your nokia update for my phone and it failed....now i can turn on my phone...im hoping your gonna fix this problem...since everything was fine until i tried to update it....i did not pull out any cables....i left the phone in....and it said that the update failed...now i cant see anything on my phone

i went to a nokia care center and they told me the phone was not under warrenty and that i would have to pay for it to be fixed. Is this some kind of joke? your software has ruined my phone and now i have to pay for your problem? nokia you had better get back onto me about this. I work in radio...and you do not want me telling the people of ireland how you broke a phone and then would not fix it!
this is your problem...not mine!
now where is my response from a nokia rep?

After stalled software update, my iBook will not start up all the way.

Here's my problem:
I was almost done with software update when the process seemed to stall for no apparent reason. The software update status screen said my iBook was 67% done with hard drive optimization, and stayed in this state for 15-20 minutes. The computer itself was not frozen, however, so I forced quit and tried to restart the machine.
On the restart, however, I couldn't get out of the gray screen with a status circle made up of small rectangles. I tried to force restart, but the situation did not improve.
Can anyone help me?
Thanks.
-Aaron

Welcome to Apple Discussions Aaron
Force quit in the middle of an installation spells "trouble". Try starting the computer in Safe Mode. If successful, restart the computer and see if it fully boots. If not, you more than likely have directory damage that needs to be repaired. Disk Utility may be up to the task.
Post back

Software Update fails and shows errors in console (No Leopard 10.5.3)

I have a MacMini with Leopard installed with boxed DVD last november (upgrade from Tiger).
Every update (apps and system went fine since them).
I haven't got the java update 6 since my processor is a Core Duo and not a Core 2 Duo.
Since it's availability from Apple Servers, the Leopard 10.5.3 is not appearing.
Neither the direct downoad of Combo of Delta update are not OK to install on my system.
When i select any system volume (internal and an external usb "up-to-date") i have a warning message:
"You cannot install Mac OS X Update Combined on this volume. This volume does not meet the requirements for this update."
Anyone can help?
Thanks.
The install.log is:
May 29 20:34:13 yugo Software Update[2345]: JS: 10.5.2
May 29 20:34:17 yugo Software Update[2345]: Found receipt (id match) for ((null) / com.apple.pkg.ProAppRuntime): (ProAppRuntime / com.apple.pkg.ProAppRuntime)
May 29 20:34:17 yugo Software Update[2345]: Found receipt (name match) for (ProAppRuntime / com.apple.pkg.ProAppRuntimeSU): (ProAppRuntime / com.apple.pkg.ProAppRuntime)
May 29 20:34:17 yugo Software Update[2345]: Found receipt (name match) for (ProRuntime / com.apple.pkg.ProRuntimeSU): (ProRuntime / com.apple.pkg.ProRuntime)
May 29 20:34:17 yugo Software Update[2345]: Found receipt (id match) for ((null) / com.apple.pkg.ProRuntime): (ProRuntime / com.apple.pkg.ProRuntime)
May 29 20:34:17 yugo Software Update[2345]: JS: 10.5.2
May 29 20:34:17: --- last message repeated 1 time ---
May 29 20:34:17 yugo Software Update[2345]: Package Authoring Error: installation-check results requires a message
May 29 20:34:17: --- last message repeated 4 times ---
May 29 20:34:17 yugo Software Update[2345]: Found receipt (name match) for (AppleIntermediateCodec / auto): (AppleIntermediateCodec / com.apple.pkg.AppleIntermediateCodec)
May 29 20:34:17 yugo Software Update[2345]: Found receipt (name match) for (QuickTimeBroadcaster / a): (QuickTimeBroadcaster / com.apple.pkg.QuickTimeBroadcaster)
May 29 20:34:18 yugo Software Update[2345]: Found receipt (full match) for (BatchMonitor / com.apple.pkg.BatchMonitor): (BatchMonitor / com.apple.pkg.BatchMonitor)
May 29 20:34:18: --- last message repeated 1 time ---
May 29 20:34:18 yugo Software Update[2345]: JS: model = Macmini1,1
May 29 20:34:19 yugo Software Update[2345]: JS: 10.5.2
May 29 20:34:19: --- last message repeated 1 time ---
May 29 20:34:19 yugo Software Update[2345]: Found receipt (full match) for (PluginManager / com.apple.pkg.PluginManager): (PluginManager / com.apple.pkg.PluginManager)
May 29 20:34:19 yugo Software Update[2345]: Found receipt (name match) for (PluginManager / autoPluginManagerSU): (PluginManager / com.apple.pkg.PluginManager)
May 29 20:34:20 yugo Software Update[2345]: JS: 10.5.2
May 29 20:34:20: --- last message repeated 1 time ---
May 29 20:34:20 yugo Software Update[2345]: Found receipt (name match) for (RemoteDesktopClient / b): (RemoteDesktopClient / com.apple.pkg.RemoteDesktopClient)
May 29 20:34:20 yugo Software Update[2345]: Found receipt (name match) for (RemoteDesktopAdmin320 / b): (RemoteDesktopAdmin320 / com.apple.pkg.RemoteDesktopAdmin320)
May 29 20:34:20 yugo Software Update[2345]: Found receipt (name match) for (AirPortExtremeUpdate2007002 / auto): (AirPortExtremeUpdate2007002 / com.apple.pkg.AirPortExtremeUpdate2007002)
May 29 20:34:20 yugo Software Update[2345]: Found receipt (full match) for (iPhoto_606 / com.apple.pkg.iPhoto_606): (iPhoto_606 / com.apple.pkg.iPhoto_606)
May 29 20:34:20 yugo Software Update[2345]: Found receipt (name match) for (WebObjects5.3.3Update / auto): (WebObjects5.3.3Update / com.apple.pkg.WebObjects5.3.3Update)
May 29 20:34:24 yugo Software Update[2345]: Found receipt (name match) for (AirPortExtremeUpdate2007003 / auto): (AirPortExtremeUpdate2007003 / com.apple.pkg.AirPortExtremeUpdate2007003)
May 29 20:34:24 yugo Software Update[2345]: Found receipt (full match) for (ProAppsEffects / com.apple.pkg.ProAppsEffects): (ProAppsEffects / com.apple.pkg.ProAppsEffects)
May 29 20:34:24 yugo Software Update[2345]: Found receipt (name match) for (PluginManager / autoPluginManagerSU): (PluginManager / com.apple.pkg.PluginManager)
May 29 20:34:24 yugo Software Update[2345]: Found receipt (name match) for (ProAppsEffects / ProAppsEffects): (ProAppsEffects / com.apple.pkg.ProAppsEffects)
May 29 20:34:24 yugo Software Update[2345]: Found receipt (full match) for (PluginManager / com.apple.pkg.PluginManager): (PluginManager / com.apple.pkg.PluginManager)
May 29 20:34:24 yugo Software Update[2345]: Found receipt (name match) for (FrontRowUpdate1.3.1 / auto): (FrontRowUpdate1.3.1 / com.apple.pkg.FrontRowUpdate1.3.1)
May 29 20:34:24 yugo Software Update[2345]: JS: Firmware is up to date.
May 29 20:34:25 yugo Software Update[2345]: Found receipt (name match) for (AirPortExtremeUpdate2007004 / auto): (AirPortExtremeUpdate2007004 / com.apple.pkg.AirPortExtremeUpdate2007004)
May 29 20:34:25 yugo Software Update[2345]: Found receipt (full match) for (iMovie_710 / com.apple.pkg.iMovie_710): (iMovie_710 / com.apple.pkg.iMovie_710)
May 29 20:34:25 yugo Software Update[2345]: Found receipt (name match) for (QT72CompatibilityUpdate / auto): (QT72CompatibilityUpdate / com.apple.pkg.QT72CompatibilityUpdate)
May 29 20:34:26 yugo Software Update[2345]: Found receipt (id match) for (Software Update / com.apple.pkg.QuickTimeBroadcaster): (QuickTimeBroadcaster / com.apple.pkg.QuickTimeBroadcaster)
May 29 20:34:26 yugo Software Update[2345]: Found receipt (name match) for (QuickTimeBroadcaster / auto): (QuickTimeBroadcaster / com.apple.pkg.QuickTimeBroadcaster)
May 29 20:34:26 yugo Software Update[2345]: Found receipt (name match) for (ProAppsEffects / autoProAppsEffectsSU): (ProAppsEffects / com.apple.pkg.ProAppsEffects)
May 29 20:34:26 yugo Software Update[2345]: Found receipt (name match) for (PluginManager / autoPluginManagerSU): (PluginManager / com.apple.pkg.PluginManager)
May 29 20:34:26 yugo Software Update[2345]: Found receipt (full match) for (ProAppsEffects / com.apple.pkg.ProAppsEffects): (ProAppsEffects / com.apple.pkg.ProAppsEffects)
May 29 20:34:26 yugo Software Update[2345]: Found receipt (full match) for (PluginManager / com.apple.pkg.PluginManager): (PluginManager / com.apple.pkg.PluginManager)
May 29 20:34:26 yugo Software Update[2345]: Found receipt (name match) for (QuickTime745_Leopard / auto): (QuickTime745_Leopard / com.apple.pkg.QuickTime745_Leopard)
May 29 20:34:26 yugo Software Update[2345]: Found receipt (name match) for (PluginManager / autoPluginManagerSU): (PluginManager / com.apple.pkg.PluginManager)
May 29 20:34:26 yugo Software Update[2345]: Found receipt (id match) for (Software Update / com.apple.pkg.PluginManager): (PluginManager / com.apple.pkg.PluginManager)
May 29 20:34:26 yugo Software Update[2345]: Found receipt (name match) for (iTunesAccess / iTunesAccess): (iTunesAccess / com.apple.pkg.iTunesAccess)
May 29 20:34:26 yugo Software Update[2345]: Found receipt (name match) for (AppleMobileDeviceSupport / amds): (AppleMobileDeviceSupport / com.apple.pkg.AppleMobileDeviceSupport)
May 29 20:34:26 yugo Software Update[2345]: Found receipt (name match) for (iTunesX / iTunes): (iTunesX / com.apple.pkg.iTunesX)
May 29 20:34:26 yugo Software Update[2345]: Found receipt (name match) for (AirPortUtility / a): (AirPortUtility / com.apple.pkg.AirPortUtility)
May 29 20:34:26 yugo Software Update[2345]: Found receipt (name match) for (AirPortUtility_Leopard / a): (AirPortUtility_Leopard / com.apple.pkg.AirPortUtility_Leopard)
May 29 20:34:27 yugo Software Update[2345]: Found receipt (name match) for (FrontRowUpdate2.1.3 / auto): (FrontRowUpdate2.1.3 / com.apple.pkg.FrontRowUpdate2.1.3)
May 29 20:34:27 yugo Software Update[2345]: Found receipt (name match) for (SecUpdQuickTime716 / auto): (SecUpdQuickTime716 / com.apple.pkg.SecUpdQuickTime716)
May 29 20:34:27 yugo Software Update[2345]: JavaScript error "Undefined value" while running "_choice_suvisible"
May 29 20:34:27 yugo Software Update[2345]: _choice_suvisible returned error: Undefined value
The install.log for the combo package :
/System/Library/CoreServices/Installer.app/Contents/MacOS/Installer[2384]: vm_allocate: 0, 0x5000000 - 0x25000000
/System/Library/CoreServices/Installer.app/Contents/MacOS/Installer[2384]: vm_protect: 0
Installer[2384]: @(#)PROGRAM:Install PROJECT:Install-378
Installer[2384]: @(#)PROGRAM:Installer PROJECT:Installer-278
Installer[2384]: Hardware: Macmini1,1 @ 1.66 GHz (x 2), 2048 MB RAM
Installer[2384]: Running OS Build: Mac OS X 10.5.2 (9C7010)
Installer[2384]: Env: PATH=/usr/bin:/bin:/usr/sbin:/sbin
Installer[2384]: Env: TMPDIR=/var/folders/Y4/Y4sMCsAIE58cyYkAJi5FfU+TI/-Tmp-/
Installer[2384]: Env: SHELL=/bin/bash
Installer[2384]: Env: HOME=/Users/thierry
Installer[2384]: Env: USER=thierry
Installer[2384]: Env: LOGNAME=thierry
Installer[2384]: Env: DISPLAY=/tmp/launch-2C4GnV/:0
Installer[2384]: Env: SSHAUTHSOCK=/tmp/launch-5LZwpK/Listeners
Installer[2384]: Env: ApplePubSub_SocketRender=/tmp/launch-65XpRu/Render
Installer[2384]: Env: _CF_USER_TEXTENCODING=0x1F5:0:1
Installer[2384]: Env: SECURITYSESSIONID=cb6620
Installer[2384]: Env: COMMAND_MODE=unix2003
Installer[2384]: Mac OS X Update Combined Installation Log
Installer[2384]: Opened from: /Volumes/Mac OS X Update Combined/MacOSXUpdCombo10.5.3.pkg

I'm also receiving SU console error messages - irrespective of whether SU is run from the menu, automatically on its weekly schedule, or logged into the computer using a different user.
Any ideas?
Here are my console messages:
5/26/08 12:25:13 pm Software Update[184] Package Authoring Error: installation-check results requires a message
5/26/08 12:25:13 pm Software Update[184] Package Authoring Error: installation-check results requires a message
5/26/08 12:25:13 pm Software Update[184] Package Authoring Error: installation-check results requires a message
5/26/08 12:25:13 pm Software Update[184] Package Authoring Error: installation-check results requires a message
5/26/08 12:25:13 pm Software Update[184] Package Authoring Error: installation-check results requires a message
5/26/08 12:25:20 pm Software Update[184] JavaScript error "Undefined value" while running "_choice_suvisible"
5/26/08 12:25:20 pm Software Update[184] _choice_suvisible returned error: Undefined value

10.6.3 update fails and is NOT WORKING

I have 2 machines
MB PRO
MINI
both running snow leopard
both have been updated to 10.6.3
BOTH are having major problems running all aps.
Safai stops responding
Mail stops responding
Finder Stops responding
itunes stops responding
APPPLE PLEASE HELP !!!!!!!!

This is a user-to-user forum. Apple technical support does not respond here. We are simply all users trying to help one another. If you feel you need to contact Apple about your issues you need to call Applecare.
What did you do to prepare for this update? Did you run Disk Utility to check the integrity of your hard drive before updating? Did you make sure you had a current backup of all your data? Was the update applied through the Software Update preference panel or did you manually download the update? If you downloaded manually which version did you choose? Was it the correct one?
Fill us in on exactly what you did and exactly what is happening on your system. Maybe we can find a solution.

Software updates fails and reverts at reboot

Hi,
I'm trying to deploy a big software updates group on windows 7 x64 machines.
During the tests, I noticed on a lot of machines that changes are revert at reboot.
I decided to split the big updates group in smaller updates groups.
The first tests seem good but I would like know how manage the order of deployment groups order?
Thanks in advance.

the only way to control the update Groups is to assign different deadlines and not configure them to be installed at the same time. But if the deadlines has passed then there is no way to control the order.
Kent Agerlund | My blogs: blog.coretech.dk/kea and
SCUG.dk/ | Twitter:
@Agerlund | Linkedin: Kent Agerlund |
Mastering ConfigMgr 2012 The Fundamentals

Hyper-V Host displays error "Automatic Reapir Failed" and will not start after Power Outage

I have a single Dell PowerEdge configured as a Hyper-V host running Wink12 R2 Preview as a Native Boot VHD and hosting about a dozen VM's. We had a break in the power, just a lights on lights off, but it was enough to shut the machine down and trigger restart.
But the machine won't restart--instead it displays a message "Automatic repair Failed" and none of the Advanced repair options work to get the host back online.
Any assistance is greatly appreciated.
Michael J. Murphy

Hi MJMurphy,
Sorry for the delay , it seems likely a disk problem cause of unexpect interrupt .
Please boot the host from OS ISO and try to copy the VMs' VHD files and any important data to a safe place (such as external USB)via command prompt mode .
(perhaps you need to prepare raid driver if you have a raid controler )
Using diskpart --> list volume to check the status of disk partion or you can contact the hardware vendor to check it .
Hope this helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Nokia N73 software update fails and phone is not p...

i was updating my Nokia N73 phone and suddenly updation interrupts i don't know why and after that my phone is not powering on so please tell me what do i do to get my phone working

I don't have a clue how much it will cost.
Go to THIS part of Nokia's site, fill in the form and either call or E Mail the service center.
http://www.nokia.co.in/A4536241
N96-1 + 8G SD~Software Version 30.033~Software Version Date 18-06-09~Type RM-247~P/C 0543713~T Mobile UK

App Store and Software update failed after upgrade to Maverick. How to fix it?

Hi everyone,
I updated to Maverick and everythinhg went fine, until today that a window opened asking something about XCODE and y closed it. After that, App store and software update failed and some apps like Mail and Preview are either failing or just ot working at all. How can I fix it?

Hi everyone,
I updated to Maverick and everythinhg went fine, until today that a window opened asking something about XCODE and y closed it. After that, App store and software update failed and some apps like Mail and Preview are either failing or just ot working at all. How can I fix it?

The software update failed

Downloading the latest firmware took forever (3 hours and still at 30%). Then I accidently unplugged the USB cable. Now my phone says "The software update failed" and I am unable to turn it on or connect using The Sony Bridge for Mac. How can I fix this?

You may need to perform a software repair using PC companion.The process will erase all internal memory.You might need to charge your device for about 1-2 hours before so the device has at least 60% battery.
Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device).
Open PC companion->support zone->phone/tablet software update->repair my phone/tablet blue highlighted.Follow the steps given,do not connect your phone until prompted to press volume down while plugging USB cable. If PC companion does not start the repair process, you might need to run it in compatibility mode with Windows 7 (in some cases XP).
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

4S update from 7.1.2 to 8.1.2, says Software update failed

The device is confirmed it is a 4s, but we never upgraded to IOS 8 yet. I continue to get the Software Updated failed and the close and settings box comes up. Whichever you click on it goes back to the update screen. I am on very fast Wifi and the device is plugged in. Two days ago it said there was not enough space, so we deleted videos and now there is 5.7 GB available. I tried to update through ITunes, but the internet is too slow at home and it says 20 hours to update. We tried that twice and after 15 hours the "software update failed" notification comes up. Any ideas? I also turned off the phone and turned it back on.

I would reset the phone - no data loss involved - and try again
Restart or reset your iPhone, iPad, or iPod touch - Apple Support

When I click on Firefox it opens with a box that says "Foxfire is installing your updates and will start in a few moments-. " then it says "Software Update Failed (in blue) with an exclamation mark inside a yellow triangle) The update could not be install

When I click on Firefox the first time it says "Foxfire is installing your updates and will start in a few moments…. (with a green bar)" then it says "Software Update Failed (in blue) with an exclamation mark inside a yellow triangle)
The update could not be installed. Please make sure there are no other copies of Firefox running on your computer, and then restart Firefox to try again." When I click the ok, Firefox opens up. If I open another Firefox window with the previous one still running, it doesn't give me any of these messages, it just opens normally.
== This happened ==
Every time Firefox opened

If you can't install on top of the current installation then you need to delete or rename the current Firefox program folder to do a clean install.
It is possible that your security software is using or locking files, so you can try to temporarily disable that software during the installation.

HT1600 my software update fails every time I attempt to update. I have restarted the device, selected software update but when it get to the end of "preparing software update", it fails and says the update was not successful. any ideas?

my software update fails every time I attempt to update. I have restarted the device, selected software update but when it get to the end of "preparing software update", it fails and says the update was not successful. any ideas?

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.

N8 software update failed and N8 not starting... :...

Similar Messages

Maybe you are looking for