N8 - Some Apps & Widgets Not Working After 2nd Ann...

I advanced the date on my phone and saw another (?) service pack update for Anna. So, I installed it, thinking it couldn't hurt, even if it's the same one I had already downloaded. Now, several apps and widgets no longer work or even load, such as Accuweather, Social, Memory Bars, RamInfo, etc. I re-installed Anna from Nokia Suite, although there was no option to re-install 1/2 and 2/2 or the original service pack. I even did a restore factory settings (without delete data) and no joy.
I'm in the US and have Anna 25.007.269.04.
Everything was working fine before I made that foolish mistake. Anybody experiencing this or have any suggestions? I'm afraid that even a full soft reset won't help if I backup the data in the condisition that it's in now.
Solved!
Go to Solution.

Thanks for your suggestion @haZey. Yes, I did try un-installing and re-installing the affected apps without any change. I even tried to re-install Anna from Nokia Suite to no avail. I then tried it using Nokia Software Updater, but it kept giving me an error that it was losing connection to the phone near the end of the update.
I know it's not recommended for an end-user, but I finally used Nokia Care Suite for Store v.4 and selected the "Software Reset" option. I wasn't clear about the differences between "Software Reset", "Software Update" and "Refurbish", but the program showed that "Software Reset" would restore factory settings and only delete "some" user data. After it downloaded and flashed Anna 25.007, I then used FOTA to re-install Anna updates 1 and 2, Social and the Anna Service Pack. Everything went very smoothly. I was able to restore my contacts and messages from a recent backup, but chose to configure from factory settings manually rather than by restoring the backup settings. I did lose a few apps, like Sleeping Screen, Nokia Battery Monitor and the New Nokia Store QML Client, but I was able to re-download and install them again.
It took a few hours to get everything back to normal, but all is well and now I can breathe a sigh of relief.
I think I've learned my lesson - leave well enough alone. If it ain't broke, don't fix it!

Similar Messages

TS1702 Certain apps will not work after ios6 install.

Certain apps will not work after ios6 update. Tiger Woods golf will run for about 5 seconds and stop. Have uninstalled/re-installed to no avail.

My husband had the same problem with some apps after I updated his iPad 2 to iOS 5. I checked the app store and there were updates for the apps to support the new software. After updating, all apps work just fine.

TS1702 My app store, Apple ID, safari, and most other apps do not work after upgrading to iSO 6, How do i solve this problem?

My app store, Apple ID, safari, and most other apps do not work after upgrading to iSO 6, How do i solve this problem? Can somebody help me please?

The App store is a problem for many and I have not seen a solution.
What is "wrong" with your Apple ID?
Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.

HT1937 I have installed an app : Birdfield guide in my iPhone 4. But the app is not working after installation. It shows black screen when opened

I have installed an app : Birdfield guide in my iPhone 4. But the app is not working after installation. It shows black screen when opened. I need suggestions to make it work or the reasons for not working.

Yes TeeKnows, try deleting it and download it again. After finished installation if still shows black screen delete it out off 'running apps' by double tapping the home button and swipe it off. If still shows black screen then try fully turning off your iPad (holding the sleep button) and turn back on again.
I hope I helped
thanks
Lydia

Most of my apps do not work after 3.1 upgrade

Most of my apps do not work after 3.1 upgrade. I have done a softboot 2 times and they still willnot connect.

Are you running the current version of the 3rd party apps on your iPhone - have you checked for app updates with iTunes on your computer?

My email is changed on my apple id and now some apps do not work anymore incl icloud. What to do

My email address changed so altered it in apple id. However now some apps do not work anymore. And my email there seems not changeable
I.e appstore, icloud, search friends etc
Thx for yr help

Hi frisbo1312
I am in the UK and eventually found the problem was due to my BT Home Hub Router. Not sure where you live, but of you are in the UK, this might work for you.
I found this fix below on https://discussions.apple.com/thread/4604180?start=15&tstart=0
It worked for me. If you can't link to the URL, here is the body of the text
There's an issue related to the BT homehub that is providing a hostname that is "syntactically incorrect" for several smtp server.
Here's how you can fix it.
Using your internet browser, go to the address "192.168.1.254
- Follow instructions to reset your password if asked.
- Then go to "Settings", then "Advanced Settings" and "home network"
You will see there all the devices that are connected or that has been connected before. It's gonna be easyer if yout computer is the only one connected.
Your computer should have a name like "unknown-xx:xx:xx:xx:xx ...
Click on this name, chose another name without any special characters, like "macbook" for exemple.
And then click on "apply"
- restart your computer.
That should fix the issue.
Credit goes to vincentfromcork for providing me with the solution.
Spread the word

Some Of My Apps Do Not Work After Upgrading To iOS 4 And Fluctuating Wi-Fi

After upgrading to iOS 4 on my 8GB iPod Touch, some of my audio apps do not work. CBS Radio just crashes, ESPN Radio stays on the "Station ESPN Radio data loaded" screen, and the iRadioSuite stays on "Connecting". Sirius/XM Online, iheart radio, Radio, and WunderRadio appear to work correctly. Also, I always had three bars for wi-fi signal strength on my home network before the upgrade. Now I get fluctuating levels that at times go down to two bars and even one bar. Needless to say, this is very frustrating!

I also updated the iPhone 3G yesterday to iOS 4. I just turned on wi-fi on the iPhone. CBS Radio crashed on the iPhone but I got a steady three bar wi-fi signal strength level as I moved around the condo so this must be an 8GB iPod Touch and iOS 4 interface issue.

Most of the default Mac Apps does not work after Mavericks Upgrade

Hi, I did everything, but nothing has brought me out of this misery .
I Updated Maverick just 2 days after its release. Had no problems, other then slow Finder. I restarted my iMac last week, and got caught with these issues, known to me, not sure what all bugs are there.
All these apps does not work: App Store, TextEdit, Preview, Terminal, iBooks, Maps, Calendar, Contacts, Mail, etc
I do not know how to do a clean install, as I had upgraded from Snow Leopord to Mountain Lion and to Maverick using App Store, which does not open at all.
Hoping to get some response soon from Apple support team to help me.

Hi Arthur,
Thanks for the headsup about Apple Support thing... My iMac is not under warranty.
And below is the report generated from EtreCheck. Hope it can help me find the solution.
Hardware Information:
          iMac (20-inch, Early 2008)
          iMac - model: iMac8,1
          1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
          4 GB RAM
Video Information:
          ATI Radeon HD 2400 - VRAM: 128 MB
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0
          AirPlay: Version: 1.9
          AppleAVBAudio: Version: 2.0.0
          iSightAudio: Version: 7.7.3
Startup Items:
          FanControlDaemon - Path: /Library/StartupItems/FanControlDaemon
          HDDFanControlDaemon - Path: /Library/StartupItems/HDDFanControlDaemon
          HP IO - Path: /Library/StartupItems/HP IO
          HP Trap Monitor - Path: /Library/StartupItems/HP Trap Monitor
          MissingSyncListener - Path: /Library/StartupItems/MissingSyncListener
          MySQLCOM - Path: /Library/StartupItems/MySQLCOM
          ParallelsDesktopTransporter - Path: /Library/StartupItems/ParallelsDesktopTransporter
          VirtualBox - Path: /Library/StartupItems/VirtualBox
System Software:
          OS X 10.9 (13A603) - Uptime: 2 days 2:6:45
Disk Information:
          WDC WD2500AAJS-40VWA1 disk0 : (250.06 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    My iMac (disk0s2) /: 249.2 GB (22.18 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
          Apple, Inc. Keyboard Hub
                    Apple, Inc Apple Keyboard
          Western Digital My Book 1110 999.5 GB
                    WORK (disk1s1) /Volumes/WORK: 375.81 GB (95.66 GB free)
                    PLEASURE (disk1s2) /Volumes/PLEASURE: 623.69 GB (35.57 GB free)
          Apple Inc. Built-in iSight
          Apple Inc. BRCM2046 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
          com.logmein.driver.LogMeInSoundDriver          (1.0.0)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist
          [loaded] com.adobe.SwitchBoard.plist
          [failed] com.google.GoogleML.plist
          [loaded] com.google.keystone.daemon.plist
          [not loaded] com.logmein.logmeinserver.plist
          [loaded] com.microsoft.office.licensing.helper.plist
          [loaded] com.wdc.WDDMservice.plist
          [loaded] com.wdc.WDSmartWareServer.plist
          [loaded] rapiback.plist
Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist
          [loaded] com.google.keystone.agent.plist
          [loaded] com.logmein.logmeingui.plist
          [not loaded] com.logmein.logmeinguiagent.plist
          [not loaded] com.logmein.logmeinguiagentatlogin.plist
          [loaded] syncmateStarter.plist
User Launch Agents:
          [loaded] com.adobe.AAM.Updater-1.0.plist
          [loaded] com.adobe.ARM.[...].plist
          [loaded] com.facebook.videochat.[redacted].plist
          [loaded] com.macpaw.CleanMyMac.helperTool.plist
          [not loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist
          [loaded] com.macpaw.CleanMyMac.volumeWatcher.plist
User Login Items:
          AirPort Base Station Agent
          EarthDesk Engine
          LMILaunchAgentFixer
          AdobeResourceSynchronizer
          RealPlayer Downloader Agent
          Windows Phone 7 Connector Agent
          iAntiVirus
          TextEdit
          StatusMenu
          HP Scheduler
          WDQuickView
3rd Party Preference Panes:
          Application Enhancer
          DivX
          EarthDesk
          Fan Control
          Flash Player
          Flip4Mac WMV
          Growl
          MacFUSE
          WDQuickView
Internet Plug-ins:
          AdobeExManDetect.plugin
          AdobePDFViewer.plugin
          AdobePDFViewerNPAPI.plugin
          Default Browser.plugin
          DirectorShockwave.plugin
          DivXBrowserPlugin.plugin
          Flash Player.plugin
          FlashPlayer-10.6.plugin
          Flip4Mac WMV Plugin.plugin
          iPhotoPhotocast.plugin
          JavaAppletPlugin.plugin
          QuickTime Plugin.plugin
          RealPlayer Plugin.plugin
          SharePointBrowserPlugin.plugin
          Silverlight.plugin
User Internet Plug-ins:
          Picasa.plugin
          Unity Web Player.plugin
          WebEx.plugin
          WebEx64.plugin
Bad Fonts:
          None
Time Machine:
          Time Machine not configured!
Top Processes by CPU:
              29%          mds
               2%          WindowServer
               1%          mds_stores
               1%          LogMeInGUI
               1%          RealPlayer Downloader Agent
               1%          EtreCheck
               1%          FanControlDaemon
               0%          uTorrent
               0%          notifyd
               0%          networkd
Top Processes by Memory:
          1.00 GB            mds
          106 MB             mds_stores
          78 MB              Google Chrome
          49 MB              Finder
          45 MB              WindowServer
          40 MB              Google Chrome Helper
          37 MB              VLC
          29 MB              uTorrent
          20 MB              EtreCheck
          16 MB              DashboardClient
Virtual Memory Statistics:
          43 MB              Free RAM
          989 MB             Active RAM
          934 MB             Inactive RAM
          447 MB             Wired RAM
          4.25 GB            Page-ins
          454 MB             Page-outs

Some keybaord keys not working after suspect virus on Tecra A

Apostrophe, delete, semicolon and end keys not working after a suspected virus attack. I found record of the same problem on the net but apparently this guy fixed his problem after he found scroll lock or num lock on.
This is not the case here but there is something going on with numlock - register shows 2 and not 0. change to 0 but when reboot back to 2 again.
Suspect changed back by bios. I thought i couldnt get to bios because DEL key not working but found ESC works.
Tried to reset default values for bios but then cannot save and exit as this required the END key to work.
I was running XP at the time of the (suspected) attack and could not rectify the problem so put the computer back to the OEM status which i hoped would help - it did not, same problem so rather than install all the software on the computer again with XP i upgraded to Windows7 - fresh install.
Still keys do not work - it was a real pain to start with as my computer was set up to ctl+alt+del to log in and i had to do this with on screen keyboard - XP - this also showed that numlock was on before and after windows boot.
The reason i suspect a virus - my wife was watching one of her tv shows on line from home country (another toshiba laptop) and i needed to use that laptop for something else so i asked her to use mine - later on we turned the laptops off and in the morning turned tham back on again, the other laptop with AVG virus protection flagged several hits and this one with (FAMOUS and completely up to date) Norton flagged nothing - once i got into it using on screen keyboard.
Problems with this computer was found after scanning with a different antivirus.
Anyway - i am left with 4 keys that do not work on my keyboard (actually they did work after i logged into the computer for the first time but i had to hold them in for a long time - and then next time i rebooted, not work at all and havent ever since)
Any assistance here would be greatly appreciated, i have been working on this all weekend with no joy at all.
Thanks in advance.

Thanks Xardas,
I have essentially done both - tried Toshiba OEM status found on a small partition of the toshi hard drive - no good - then did a fresh install of Windows 7 - still no good
You know - as cunning as it sounds - i cannot reload the default settings in BIOS as it requires the END key to work so i can Save & Exit - all i can do is Exit Without Save - i sort of feel snookered at the moment.
Toshiba got back to me today and said that i have tried everything they would have (yeah for sure) and to take my machine into a service centre for a hardware check - yeah right on boys!
Check out this guys post below found on Kioskea.net - getting close to a year ago...
ms ml - Nov 10, 2009 12:52am GMT
Hi there, I was hoping that you might be able to help me with the problem that I seem to be having with my Toshiba Satellite Laptop Keyboard too. For a few days now I havent been able to use a few of the keys on my keyboard, including (1) delete (the backspace key is still working though), (2) colon/semicolon, (3) apostrophe/quotation marks and (4) end (the home and PgUp and PgDn keys are still working though). Any suggestions?
Identical to my problem....obviously this guy had the same problem as well...see below - same thread.
yab - Feb 9, 2010 4:47am GMT
hi did you ever figure this out? i have the same exact problem...
However, i was not able to solve my problem the way this guy did - my scroll lock is not activated - it seems to work ok (on and off) i tested it using Excel to move around the cells.
yab ms ml - Feb 9, 2010 7:57am GMT
Nevermind. For me it was scroll lock. My apostrophe, semicolon, and delete keys are alive and working again. I hope you have the same easy fix.
Incidently - never hear from the first guy again - probably ended up being his scroll lock.
all sugestions welcome - sorry my smily face has no eyes -) guess why!

App store not working after upgrade to Maverick

i recently upgraded my machine to the latest OS ... but now i am facing a problem where the laptop just freezes ... the app store does not work... Please could you help me... i need some advice ... I have a MAC BOOK late 2008... i love this machine , do not want to give up on it.
Please could you provide me a solution to solve this issue. I wanted to restore it to the factory settings but i do not have the original disc , guess i misplaced them ... is there a link i could download the ISO from.
counting on you guys ... have used my machine for the last 5years never had any issues but of late after upgrading , am facing all these issues.
Manny.

Well I have 2 GB RAM ... do i need to upgrade it ???

TS1702 My cars 2 app mate app is not working after upgrading from ipad to ipad 2...... synced.... uninstalled and re installed several times as well as wiped ne ipad out and re did the whole proccess several times. how can I get this app working?

I have installed the cars 2 app mate on a ipad 2 from an ipad 1 synced with itunes account.. all is working except this app. After many times of un installing and re installing aswell as talking to apple tech suport this app is still not working.... its there it just has no function...... how can i get this installed and working, my grandson is autistic and uses this app many hours a day........ it is important for me to get this up and running again for him.......

(1) So, I found a youtube video showing how to open up my iMac and replace a Disk drive. I opened it. I removed the disk drive. I opened the metal cover of the lid of the disk drive. It was clean and immaculate; so, it destroyed and debunked the dirty drive theory. But, just to make sure I sucked around the optical sensor with a vacuum and gently brushed it with a Q-tip.
(2) I then watched a you tube video showing how the drive operated (it was a drive supplied with power outside an iMac with a transparent cover unlike the opaque metal cover that we have on our drives). My scientific curiosity started to wonder if somehow the mechanical part (of the electro-mechanical assembly) was locked or jammed. So, I started messing with the arms with the utmost care after watching the video to see if i could move them manually. Yes on some. The main arm that is linked with the drive motor was immovable. The rest I played with a little bit, took great notice in the start of the video to see how the arms looked before inserting a disk. I then put it all back together.
It works now. My guess is that taking it out and then placing it back in along with the resetting options that others have done was the trick. I believe it is a possibility that the hard drive became locked mechanically in some strange manner after ejecting a DVD in conjunction with the uploading of the new OS. I believe the actual removal, reinstallation, and resetting of the drive put everything back into sync. My computer sits in a climate controlled dust free environment. I knew for a fact that this hard drive was OKAY.

Some apps won't work after iphone 4s update to ISO 7.

Since i updated my 4s to ISO 7, my itunes store app will not open properly. The itunes festival app will not play any performance footage. Numerous other apps will also not open correctly or display content. Everything worked properly and without issues using the last ISO 6 update. Done the usual power off and reinstall of affected apps to no avail. These apps were all updated prior to or after ISO 7 install. Any one got the same problems or maybe any answers. Other devices in the household - iphone 4s, iphone 5, Ipad 3 and ipod touch 5th gen all converted with no issues and will open/use the same apps that i am struggling with. Other iphone 4s even mirrors my settings!!! I have the same issues on wifi as well as 3g. Help please.

A user called ibond solve my problem. I had to go to settings, safari, block cookies and change from always to third party. Another way that helped some users is to open your music app and select store from the top left of the screen. This gives access to itunes store and clears a glitch. Although this didn't work for me it did work for others.

Some reports do not work after upgraded to Crystal Report 2008

Hi All,
After upgraed from Crystal Report XI to Crystal Report 2008, some reports work fine. others not. All of the not-working reports have the same problem: Database connection failed.
And I can even not be able to create a brand new report. The problem looks like following:
    1. Created a new ASP.NET solution in Visual Studio 2008. The page file is default.aspx
    2. Created an empty Crystal Report file: CrystalReportTEST.rpt
    3. Asign CrystalReportTEST.rpt to default.aspx
    4. Run default.aspx. It works fine
    5. Just connect to database without place any field to the report
    6. Run default.aspx again. It does not work. It shows blank screen with the message "Database logon failed." on the top-left corner.
Regards,
Triple

Hi Amit,
I have tested many times again for creating new report in new solution. It looks like that, the preview in VS2008 always work fine, but when runing the application, sometimes it works sometimes does not work. I have not still found the role. Following step shows my testing process:
1. Start Visual Studio 2008
2. Go to menu "File->New->Web Site..."
3. In dialogbox "New Web Site"
          a. Highlight "ASP.NET Crystal Reports Web Site"
          b. Select location "File System"
          c. Select language "Visual C#"
          d. Select "E:\JL\CrystalReportsWebSite1"
          e. Click button "OK"
4. It appears dialogbox "Crystal Reports Gallery"
          a. Select "Using the Report Wizard" in portion of "Create a New Crystal Report Document"
          b. Select "Standard" in portion of "Choose an Expert"
          c. Click button "OK"
5. It appears dialogbox "Standard Report Creation Wizard"
          a. Click button "Cancel"
6. It is back to page edit view of "CrystalReport1.rpt"
7. Click button "Main Report Preview". It shows the preview with blank page
8. Click button "Main Report". It came back to the edit view
9. Go to menu "Crystal Reports -> Database -> Database Expert...", dialogbox "Database Expert" appears. Select table u201Cactivity_cdu201D as showing in following screen shot:
10. Click button u201COKu201D. It returns to the edit view without any changes
11. Place some fields into the report, then click button "Main Report Preview". It shows the preview with data
12. Run application by pressing key F5 or key combinition Ctrl+F5, it shows up database connection import screen
13. Close the browser and back to file Default.aspx, change u201CEnableDatabaseLogonPromptu201D to u201DFalseu201D and run the application again, it shows following message "Database logon failed."
Regards,
Triple

Some Apps don't work after an upgrade IOS to 6.1.1

Description of the problem with my iPhone 4 after an upgrade from iOS 5.1 to 6.1.1:
Some Apps try to start but stopped immidiatly.
The issue for my case:
Try to find your App trough the App Store on your iPhone.
The status of this App should be open. (but when you try to open it, it won't !!!)
Use the main button to go back to your App and delete it.
Go back to Apps Store and reinstall your App.
Check the progress of the installation.
When the install is done open your App again and it should be working again.
Best regards,
Schotel

Try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.

App store not working after installing Mavericks

After I installed OS Mavericks the app store no longer responds. This means I cannot install any of the updates. The notes app is also not working. I can start the programmes but they do not respond or close. I have to literraly close them through the activity monitor.
Is anyone else experiencing the same issues? Is there a fix for this?
Kind Regards,
Micky Kieboom

I am having the same issue. Why is Apple taking so long to respond?

N8 - Some Apps & Widgets Not Working After 2nd Ann...

Similar Messages

Maybe you are looking for