N8 switching to loud speaker automatically

Hi there 
recently on my N8 sometimes while talking on the phone it switches to loud speaker automatically (on the screen options it still shows the option to open loudspeaker) and the only way to switch to handset mode is to activate loudspeaker then deactivate... anyone else have this same problem
*looking for a solution other than soft reset cause i'm kinda liking my ovi store
If you found this post or any other psot helpful please press the green kudus star

vikashvjain wrote:
If you have fring installed then uninstall it and try . . It should work fine . . I had the same problem with fring installed now working fine after uninstalling it .
Seems as if fring causes alot of compatibilty issues (first the RSS feeds) and now this, problem is i need fring, any work around?
If you found this post or any other psot helpful please press the green kudus star

Similar Messages

  • When i make calls people can't hear me but i can hear them and when i switch ti loud speaker they can hear me! can anyone help??

    When i make calls no one can hear me unless i switch to loud speaker!
    tryed to make an appointment on the apple website when you click iphone it dosent allow you to progress whats the point in having that when it its no use!!!
    can anyone help in regards to ppl not hearing me??

    Hi rawmau,
    Welcome to the Support Communities!
    As a first step, I would suggest restarting and/or resetting the iPhone:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    Here are some additional troubleshooting steps for sound on your iPhone:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Cheers,
    - Judy

  • People call me they can hear me but i cant hear them unless i switch to loud speaker

    pls help

    Hey. I have iphone 4 white factory unlocked,it was working fine when i purchased it and after a few days i updated it to 4.3.5
    Now whenever i recieve a call or make a call there is no voice in ear piece and neither can the person on other end hear me. I even tried to put on the speaker and make a call but nothing changed. I tried the handsfree but then again nothing happened.
    On the other end when i tested its recording through voice memo,everything works(SPEAKER,MIC,EAR PIECE AND HANDSFREE). Speakers even work when im using youtube,games and ipod.
    Everything works fine but when on call speaker,mic,earpiece and handsfree. I just bought my iPhone From England and im not in ENGLAND OR USA to claim my warrenty. Im In Pakistan and i have no apple stores here to claim my warrenty.
    Please help.
    Best Regards,
    Dr.Raza

  • E50 Goes to Loud speaker (IHF) mode automatically ...

    Hi,
    I have a problem with my E50 which is some thing like this,
    During call waiting (While I am receiving a second call, when I am already on a call) the incoming audio is switching to loud speaker automatically with out any commands. Then I can not change it into normal speaker even if I tried to do so. The only way to get rid of this is to remove the battery and restart the unit again. Do anybody having the same issues,
    regards,
    Sanju

    vikashvjain wrote:
    If you have fring installed then uninstall it and try . . It should work fine . . I had the same problem with fring installed now working fine after uninstalling it .
    Seems as if fring causes alot of compatibilty issues (first the RSS feeds) and now this, problem is i need fring, any work around?
    If you found this post or any other psot helpful please press the green kudus star

  • Why does my loud speaker keep switching itself on my iphone

    why does my loud speaker keep switching itself on my iphone.Every time I'm on my phone the loud speaker keeps coming on autermaticly

    Call AppleCare (number is in the manual) and then request to speak to Customer Service. Be patient, organized and articulate and they will transfer you. When you get to speakt to someone then explain your problem and ask for their help. You should have all your receipts, invoices, trouble ticket numbers etc available for reference.
    You can also take to an Apple Store in Spain, while this may not be convenient at least then an Apple person can see the machine and work on it.

  • E71 Gets stuck after loud speaker is used in a pho...

    Hi all,
    My first post...
    I only got my phone this week and have used the nokia updater to get the latest firmware (dont know what it is exactly).
    I've noticed that after I use the loud speaker/ hands free setting in a phone call the phone gets stuck on the "front page". It wont go into the menu page by any means, or any other page at that.
    [edit] I have to turn the phone off and on again to get it unstuck. [edit]
    Has any one else experienced this?
    Cheers,
    Roddersf.
    Message Edited by roddersf on 04-Nov-2008 06:22 AM

    I haven't been able to correlate this with loudspeaker use, but I have experienced the same symptom.
    After some usage (it may, or may not involve loudspeaker being activated), menu gets "stuck" behind the home screen. That is, upon pressing the menu button once, I can see a bit of menu screen appearing in top right corner of the screen, but I can't navigate it; it's almost like there is some bug in z-buffer ordering of the screens being rendered, and/or it also prevents the screen getting focus. I can still switch between the apps already running via the menu button press-and-hold though.
    Didn't find a way to cure this except by switching the phone off/on.
    Quite annoying.
    This is on 100.07.76 RM-357 phone, will report if this continues after I upgrade to the latest firmware soonish.
    P.S. At least one of my friends is experiencing exactly the same behaviour on his E71.
    Message Edited by mbravo on 08-Dec-2008 08:57 AM

  • Switching constantly from speaker to headset

    Hello,
    I;ve had my Q10 for a few days now (I switched from a 9810) and I'm very happy about it.
    One problem though: when I insert my BB headset, audio switches from speaker to headset constantly so I can only hear fragments of conversation. I have to remove the headset and either use the loud speaker or normal audio.
    I tried my previous BB headset and the one provided with the q10: same issue.
    it is a brand new Q10 (they're not that old anyway) so I highly doubt there's dust in the connector.
    Does anyone have the same issue ?
    I've not tried with music or videos.

    Hi there
    My wife and I have 2 new Q10s, and we are getting this problem! The audio keeps switching from headset to the phone speaker. When it does work the audio only comes through one earpiece! This is really annoying is there a solution to this problem? I've tried different earphones but the problem is the same.

  • Loud Speaker Turns on during call . Any solution ?

    Loudspeaker turns on during call with an option showing me that its in handset mode and offcourse it still gives me an option to switch the loudspeaker on . Is there any solution for this tried updating the software and all ... 
    If any other solutions pls let me know .... 
    I had this problem with my N8 which i got on October 11 2010 since then i have been to Nokia  Care more than 30 times for service and other problem . Atlast they gave me a replacement handset (swap is what they call) a week back but even with the New handset i am facing the same problem .. Is there any solution 
    Regards 
    Vikash

    No Bro it doesnt works ...
    Tried it with a different Sim card as well but facing the same problem Loud Speaker turns on by itself ... ...  Dont know if there is ever gonna be a solution for this . . Even Nokia care has no solution for this problem ..  I guess the Nokia Technician are incapable  or inefficient of sorting the issue  .. 
    Do tell me if u have anything  else which i could try ... 
    Thanks 
    Vikash

  • My iPhone 6 ear speaker is not working properly I couldn't able to hear any thing from ear speaker to lissen I had to put on loud speaker or to use handsfree please help me out with this problem if some body have answer?

    My iPhone 6 ear speaker is not working properly I couldn't able to hear any thing from ear speaker to listen I had to put on loud speaker or to use hands free please help me out with this problem if some body have answer?

    Hi Venkata from NZ,
    If you are having an issue with the speaker on your iPhone, I would suggest that you troubleshoot using the steps in this article - 
    If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • When i want to call somwhone with my i-phone, i only hear the other person, if i press the loud-speaker. does anywhone know, how i can solve this problem

    what can i do, when i call someone with mit i-phone, i only hear the other person, when i press the loud-speaker button, does anyone know, how to solve this problem

    Does hte iPhone say headphones when you adjust the volume, even when they aren't connected?
    If it does, there might be some lint or something in the jack. Take a look at this Apple document -> iPhone: Can't hear through the receiver or speakers

  • Nokia lumia 1520 loud speaker grinding sound and w...

    hi,
    my nokia lumia 1520 has been making sound grinding sounds which can only be heard if you put your ear close to the loud speaker. i emailed the company that i bought the phone from and this is what they said:
    "for this type of issue, you can do a Master Reset on your phone (please take note that by doing this all of your data will be erased). If the problem persists, kindly go to your nearest Nokia service center to have it checked. If it's still under warranty, any repairs will be free of charge. If it's NOT under warranty, please get the code from the service center and forward it to us through [email protected] so we can review the charges (subject for approval) and give you a refund for it."
    i did as they said but when i went to the nokia care centre, since i live in uk and the phone is from dubai they said that its out of warranty so i asked them for a code as the company said to me but nokia care team had no idea what i was talking about. i showed them the email and nothing
    so i was wondering if anyone can help me out
    id really appreciate it 
    thanks

    Hi thedeepsleeper,
    Welcome to the Nokia Support Discussions! 
    Are you still having an issue with your Lumia 1520? If yes, did something happen to your phone prior to the issue? What troubleshooting steps have you tried so far? Does it happen only when you put it on a loudspeaker? How about when connecting your earphone to your phone? 
    If you would like to send it for repair and since there's no international warranty, we suggest sending it to a Nokia Care Point in Dubai instead. To know more about the difference between the warranty in the UK and in Dubai, see these links: 
    http://www.nokia.com/gb-en/support/manufacturers-limited-warranty/
    http://www.nokia.com/ae-en/support/manufacturers-limited-warranty/

  • Loud speaker on Iphone 5 not working

    hi my loud speaker does not seem to be working on my iphone 5, it wont ring loud or play music through the speaker but when headphones are in it rings through those and plays through those, any suggestions please, i have reset through itunes after backing up as advised by a friend who works for O2 but that hasnt worked.
    any thanks

    Hello chelle1705,
    Thanks for the question. Based on the information you have provided, if the issue persists after restoring your iPhone, there may be a hardware issue with your device. The following link should help you get started with servicing your device. Included, you will find information on topics such as warranty, service pricing, and express replacement service.
    Apple - Support - Service Answer Center
    http://www.apple.com/support/iphone/service/faq/
    Thanks,
    Matt M.

  • PC loud speaker with bt home hub

    We installed the hub some months ago but only yesterday did I try the loud speaker for watching something on iplayer. There was just a very loud hum, moving the hub away helped the hum but still no other sound. Any suggestions and thanks in advance.

    ....... 'you hum it son, I'll play it' (circa 1971)
    http://www.youtube.com/watch?v=HgzEBLa3PPk
    For the OP, as stated above, check your sound settings/drivers, also check your speaker/amp/sub-woofer cable connections to and from your PC
    I had a similar problem as you (a hum) a few days ago when Infinity was installed.
    My sub-woofer, about 10years old, is placed on a little shelf under my PC desk. It has sat next to my both my old Netgear routers for years, with no problem.
    When the high speed modem and Home Hub were installed in the same place as the Netgear, I was getting a slight hum out of the speaker, not much, but just about enough to annoy you once you hear it. Once you hear it, you can't stop concentrating on it, which makes it appear worse than it really is.
    Anyway, I could have moved the sub-woofer/amp somewhere away from the modems, concluding that the electromagnet screening was either poor in the modem(s), or poor in the sub-woofer/amp. That may have fixed it, or I could have been very unlucky to find out that it was the speaker cables that were unscreened or poorly screened.
    So I took a risk, and decided to replace my speaker/sub-woofer setup, as the whole caboodle is a bit aged now (like me).
    Yesterday, I popped over to my Curry's superstore, and purchased a reasonably nice little Sony Active Speaker System. Installed that in the same place, and they work and sound great to me. More modern, better screening I suppose. I know that it a bit of a drastic way to go about things ........ but I do LIKE new gadgets
    I bought this, £10 off the original price , Sony SRS-D21 Multi Channel PC Speaker System.
    http://www.currys.co.uk/gbuk/sony-srs-d21-multi-channel-pc-speaker-system-00778349-pdt.html
    Cheers

  • Curve 9220 problem with loud speaker

    I am having problem with loud speaker since purchase. Volume level fluctuate every time, sometimes not audible also. 
    Complaint given to service centre in Jaipur-India but they are not cooperative. 

    Hi and Welcome to the Community!
    I recommend that you attempt to boot into Safe Mode:
    KB17877 How to start a BlackBerry smartphone in Safe Mode
    It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, see what happens.
    If the behavior ceases, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
    But if the behavior continues in Safe Mode, then you may need to consider more drastic actions -- WIPE, OS Reload, BBSAK Wipe/Reload, and the "Bare Bones" OS Reload Process. To prepare, you should be sure that you have a full backup to your PC...please review the Backup link in my auto-sig on this post for instructions.
    amitasmrj wrote:
    Complaint given to service centre in Jaipur-India but they are not cooperative. 
    Unfortunately, if your issue is a hardware problem, then no one here in this forum can help...refer:
    http://supportforums.blackberry.com/t5/Social-Lounge/How-This-Site-and-Formal-Support-Work/td-p/2540...
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Nokia N70 (Loud) Speaker not working!!!

    Hi all,
    Strange problem, the (loud) speaker of my N70 is no longer working. No sound is coming out of the phone other than the keypad beeps, no ringing, no loud-speaker sound in calls, nothing. It was working fine a few hours ago but all of a sudden doesn't work!
    I tried turning off the phone and starting it again. On re-start, the Nokia tone accompanying the joining hands too doesn't come.
    Any ideas? Any help is greatly appreciated!
    Thousand thanks,

    hi...
    well try formating the phone by *#7370# if it works than fine otherwise give it to a support center if it is under warranty... i had this experience it may be due to an sound i.c or the speaker itself!!!
    best of luck
    " Never think of the negative unless you have fully discovered the positive "

Maybe you are looking for

  • I have a doubt about The Single-Thread Rule

    The [url http://java.sun.com/docs/books/tutorial/uiswing/overview/threads.html#rule]Single Thread Rule states: Rule: Once a Swing component has been realized, all code that might affect or depend on the state of that component should be executed in t

  • Displaying Array Position not working in case of descending Order?

    Hi, I need to display the array position of the sorted array in Descending order. Here is my code.      int[] in = {5,3,2,7};           int[] newArr = new int[in.length];           int[] na = new int[in.length];           //copying into a new array  

  • Need help removing PDF from "Places" in Finder window

    I just noticed this PDF in my sidebar and I can't remove it, "Catalyst Itenerary 2012" It's an old document I must have dropped it in here at some point but must no longer exist on my computer because Spotlight cannot find it. I'm able to select ever

  • Problem in popup that appear when mouse is rested on a ribbon control.

    I have developed a Word Application level Add-in for providing some DTP facilities specific to my native language. In Word 2010 when the mouse is rested over a ribbon button then a popup appear with description about the button and prompt to press F1

  • How can I get surround sound to work?

    I have a new TouchSmart 520z.  I believe it has an integrated soundcard.  When I purchased it I was told that surround sound speakers would work.  I purchased the Logitech 5.1 speaker system.  I don't have any color coded RCA receptacles on the syste