N8 touch screen sensitivity

when in a call, i am disconnecting my original caller and calling someone else.  All this with my cheek.
How can i adjust the sensitivity?? I dont want to have to have all my calls on loud speaker, or worry about using my mobile as a phone!
any ideas
thanks

It seems no solution yet..
Pl.Refer
/t5/Nseries-and-S60-Smartphones/n8-proximity-sensor-threshold/m-p/774348#M228133
--------------------------------------------------​--------------------------------------------------​--------------------------------------------------​--If you find this helpful, pl. hit the White Star in Green Box...

Similar Messages

  • [Bug] Z2 Touch Screen Sensitivity (Random Glove Mode)

    Firmware: Xperia Z2 running 17.1.1.A.0.402 and latest 17.1.2.A.314 firmware (previous firmware I'm not sure)
    Bug: Glove mode randomly turns on, but in display setting it shows off. 
    Details:
    This happens all the time. Screen sensitivity increases as if glove mode was turned on. But glove mode is actually showed as off in display settings.  Temporary workaround: Turn the display off and on. Usually last no more than 1minute before this bug reappears. Not working steps:
    1. Turn glove mode on and off.
    2. Turn off tap to wake up.
    3. Reduce and increase screen time out.
    4. Apply and remove screen protector and tempered glass.
    5. Turn x-reality on and off.
    6. Turn auto-rotation on and off.7. Turn smart backlight control on and off.
    If you need any info from me I'm happy to help. This bug is really annoying, it causes unwanted touches.
     

    i have update to LOLLLIPOP 23.1.A.0.726 and the screen hypersensitive issue still exist.there is no difference between "glove mode "on or off .I turned off "tap to wake" because I opened the phone in my pocket. PS : I did update to version 23.1.A.1.28 and screen sensitivity remains the same. Hopefully SONY will release a new update with improved screen sensitivity

  • How to decrease touch screen sensitivity on iphone 6...buttons pushing themselves when not touched

    Iphone 6 is having touch screen issue where I will be listening to voicemails or pandora on speaker or bluetooth and buttons will be pushed even though I'm not handling phone...very annoying when listening to many voicemails...can I make touch screen less sensitive?

    Thanks  I'm having the same issue... only intermittently.  Phone changes screens, browser moves ahead, back, goes to pages in my history... all without me touching the screen or any button.  It's definitely weird!  They'll love that it only does it intermittently too.  Won't happen when I'm at the Apple Store.  I guarantee it.

  • How do I adjust the touch screen sensitivity?

    How do I adjust the sensitivity of the touch screen?

    You can't adjust the screen sensitivity.
    Try and Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Problem with touch screen sensitivity, makes calls randomly when I have it against my ear!

    I am at my wits end about this.as I am on the phone and have handset against my ear it randomly activates the touch screen and either dials someone else or put call on hold, so they can't hear me. By the time I figure out what has happened, whoever I was speaking to has likely hung up! I tried to adjust screen sensitivity but nothing I do seems to work. Same when I use track pad to scroll, it is way too sensitive, so often I am scrolling through my calendar and it will open a new appointment randomly. Is there a solution before I break this terrible phone with a hammer?!

    Your first problem ( I am on the phone and have handset against my ear it randomly activates the touch screen and either dials someone else or put call on hold, so they can't hear me.) can be solved by putting the top of the device near to your ear first and then the rest while on the call - their are sensors in the phone that blackout the display when in a call the top of the device is brought closer to the face
    Regards Eree - Follow me on Twitter - Facebook - Google+
    For More visit My Blog

  • IPhone 5 touch screen sensitivity

    Hi,
    The touch screen on my iPhone 5 has just become really sensititive, so much so that it makes the phone impossible to use. You don't even need to touch the screen and it starts typing letters. It makes using the search in contacts useless. Has anyone else had this issue and is there a fix???

    Hi Jeep4440,
    If you are having issues with the touchscreen on your iPhone, you may find the following article helpful:
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    Regards,
    - Brenden

  • TS3274 touch screen sensitivity

    I have problems with the sensitivity of certain small areas of my ipad2 screen.
    For example, not all keys are responsive on the screen keyboard.
    Any advice?

    Is it the same whichever way up that you hold the iPad ? Have you tried a reset to see if that fixes it ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Is there a function to adjust the touch on the touch screen?   Its been very sensitive lately

    iphone has been very sensitive to my touch.  Is there a setting or function to adust the touch on the touch screen?

    Based upon your OP, I don't think Assistive Touch is what you want.  For more info on AT, see p. 155 of the User Guide.
    For your problem, try cleaning the screen and/or removing your screen protector.  It's a long shot but quick and easy to do.
    If still a problem, try restoring with your backup.
    FYI, there is no adjustment for the touch screen sensitivity.

  • TS3274 Touch screen issues

    How can I fix some touch screen controls are not working. Also sometimes the space bar is not responding. I've tried power reseting but to no avail.  This situation just started yesterday no warning. Is there a utility to adjust touch screen sensitivity?

    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    If no joy...
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download
    Then Connect to iTunes on the computer you usually Sync with and Restore
    http://support.apple.com/kb/HT1414
    Also consider Deleting any Apps you have Purchased / Downloaded but you now never use..

  • Why am I having intermittant problems with my Galaxy Note 4 touch screen?

    I've had my new Samsung Galaxy Note 4 for two days now and have noticed intermittant problems with the touch screen.  I've even added more touch screen sensitivity in the settings area and it has NOT helped at all.  Sometimes I can tap on the screen repeatedly and find the phone not respond, then all of a sudden it responds.  As I keep using the touch screen...suddenly it stops responding again.  It's extremely frustrating especially when it's a brand new phone.  I have now found several other reports of this on the internet, but have not found a fix.  Suggestions (besides reset to factory settings and install each app one by one and test the phone)?  Since it's an intermittant problem, it's hard to tell if any particular app is the sole contributing factor to this.  Based on my experience and that of others...this appears to be a fairly common "bug" that we consumers are experiencing.  Help!?

    If you are experiencing problems with your Samsung Galaxy Note 4 touch screen, please continue by adding your comments here and hit the like button so we can elevate this issue to Verizon and Samsung!

  • Droid Eris Touch screen not calibrating

    I've had my Eris since December '09.  A few days ago I noticed a significant decrease in the touch screen sensitivity.  Yesterday, I noticed that part of the screen is almost completely unresponsive, unless I held it down for a long time or tapped the screen hard.
    Today, when I press the symbol to home, instead, it will select whatever is in the upper left corner, and the same for the lower right corner, selecting the upper right corner instead.
    I've tried to recalibrate it, but all I can do is recalibrate the keyboard.  Is there a way, without doing a hard reset, to fix this?

    That's most likely a hardware issue--either a component in the screen has failed or is in the process of failing. Your best bet is to bring it into a Verizon store for support--make sure to back up your data ahead of time, as they're required to try a factory reset before giving you a refurb unit. No sense in doing the reset yourself for a hardware issue when they're going to have to do it anyway.
    And if you do need a refurb, make sure to ask them to swap your current SD card into the refurb unit, so you don't lose pictures, etc.

  • How to make iPod Touch screen more sensitive?

    My iPod touch screen is not very sensitive to the touch. Sometimes i have to press down with a little force to get it to press what i want. I have tried other peoples iPod's, and compared to theirs, mine is not very sensitive. PLEASE HELP!

    Basics from the manual are restart, reset, restore.
    Try each of these.
    Did your put a screen protector on it?  Try removing it and see if that helps.

  • Touch screen double clicks are seen as two single clicks due to position sensitivity

    I'm developing an app for a laptop with a touch screen. It displays several low resolution images in Lab View pictures. The operator can select an image by double clicking, displaying a higher resolution picture that fills the screen. Double clicking that image returns to the multiple image display.
    It is very difficult to cause a double click event via the touch screen. The two clicks must be located at the exact same point on the touchscreen, or two single clicks are returned. My fat fingers can't seem to hit the same pixel twice.
    Is there a way to set the position sensitivity of double clicks in Lab View? in Windows?
    Thanks,
    Dan

    Hi Dan,
          I think this would be an OS configuration-parameter - at least, outside LabVIEW - have you looked under "Control Panel" or Programs for a touch-screen configuration utility?  Here's a link to info re: the Dell Latitude XFR D630.  Note the "Doube Click Area" parameter under "Touchkit Configuration Utility" - Settings.
    Cheers!
    "Inside every large program is a small program struggling to get out." (attributed to Tony Hoare)

  • Touch screen no longer touch sensitive

    Hi,
    I have a ipod touch since the beginning of February. All was OK until yesterday ! The screen is no longer touch sensitive.
    I'd been using it, took my headphones off when I met someone and when I put them back on couldn't hear any more music and the screen was no longer touch sensitive. Since then, I've re-installed the operating system several times but it changes nothing. When I slide my finger across the screen nothing happens.
    The screen doesn't appear to be damaged - anyway its never got a knock. Any ideas ?
    Thanks.

    Hi,
    Last week my touch screen also stopped responding. It comes back sometimes but the problem seems to get worse and worse. I have tried to do a full factory settings restore but it does not help and I have tried all the other resets as well.
    What is going on?

  • E7 Touch Screen - How to reduce sensitivity

    Hi, just got a E7 last week.  Great phone for my needs but I find the touch screen a little too sensitive that a slight brush would activate e.g the call dial pad or the options menu in the home screen. This usually happens when I try one handed operations as I try to stretch my thumb across the screen.
    Does anyone know where & how to reduce the sensitivity of the touch screen so that it will only register a touch when I deliberately touch it?
    Many thanks in advance.
    Cheers.

    I came from an N97 to the E7 and also found it extremely sensitive, however , after a couple of weeks , once you realise you only need a light touch the phone is fantastic, and if you try some of the Android phones, the reaction is similar. The main issue Nokia have had with touchscreens is people criticising there lack of sensitivity and speed, the E7 is on par with most modern touchscreen phones, give it a while and you'll love it 
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

Maybe you are looking for

  • Tags in Elements 11

    The names of  tags imported into Elements 11 from 4 show on the right of the screen. However they only show the taggged files when I click on one when I am in the Albums view on the left of the screen not when I am in the folder view? Am very new to

  • Adobe Captivate 6 won't open

    Hi all I use Adobe Captivate 6 in a corporate environment, and I'm currently experiencing issues running Adobe Captivate 6 after installing it. For some reason when the laptop is taken off the network Adobe Captivate 6 would refuse to open at all. Er

  • Levels Problem

    I've scoured the Adobe Forum and Google for an answer with no luck... On the first frame of my movie I'm loading an external swf onto my stage at the root level (which matches the stage dimensions): loadMovieNum("movie1.swf", 0); I then have another

  • Final delivery indicator unset after underdelivery good receipt.

    Hi, If the final delivery indicator is set in the purchase order SAP allows good receipts and then unset the indicator, only if the quantity in the purchase order is equal to the quantity receipt, SAP set final delivery indicator. The user want to se

  • I'm trying to apply consecutive frames (KWP2000) with the NI CAN in VB

    I'm trying to communicate with a device with consecutive can frames, but I can't. The idea is to send the following frames TX 0x720 10 08 2F 63 08 07 80 00 RX 0x728 30 00 00 00 00 00 00 00 (I have to wait until is receive this frame then I send the f