N8 TV-Out not working on multiple phones

I am using the CA-75U cable plugged into the 3.5mm jack. I have 2 phones, one on Belle Refresh and one with the Belle widgets update. I haven't used TV-OUT for about 3 months because our screen died, but now we have a new screen and now BOTH the phones won't reckognize the TV-OUT cable!
Did a recent software update stop it from working? Does anyone have a fully up to date phone and CAN get TV-OUT working via the 3.5mm jack?
Thanks.

Apparently the N8 detects what kind of accessory is plugged in by measuring voltage differences on pins which might or might not exist and since Belle it's not so good at doing this. So you might have a little more success turning on the telly and setting it to the right AV channel as well as connecting the cable in the TV end first before plugging the cable in the phone end.
Anothing thing to try would be going to Menu > Settings > Phone > Accessories, tap on hold on TV-Out then choose 'Set as default', which is appears to be what it chooses if it gets confused.

Similar Messages

TS4062 My Iphone won't appear in my devices in Itune.... And the WiFi does not work on my phone.... I seems like there is no solution to update my phone to the new ios on my computer or WiFi without using the 3g because of this!!! help me out

My Iphone won't appear in my devices in Itune.... And the WiFi does not work on my phone.... I seems like there is no solution to update my phone to the new ios on my computer or WiFi without using the 3g because of this!!! help me out

Hello there, TempestBelcher.
It seems you've covered all the bases, but feel free to review the iPhone Troubleshooting Assistant for connectivity here:
Apple - Support - iPhone - Calls Troubleshooting Assistant
http://www.apple.com/support/iphone/assistant/calls/#section_0
If you've followed all the instructions then there are a few good recommendations for what to do next in the last step.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Why is scrolling not working with multiple youtube embeds layed out vertically in a stack on one page?

Why is scrolling not working with multiple youtube embeds layed out in a stack on one page?

Hi ,
This is a sort of performance issue , because your program takes more than the max time set for the program to execute in foreground.
There are many stuff in program which will hamper your performance.
I will list down a few
1. SELECT *
FROM konp
INTO CORRESPONDING FIELDS OF TABLE konp_itab
FOR ALL ENTRIES IN a363_itab
WHERE knumh EQ a363_itab-knumh
in this statement you are using for all entries a363_itab , but before this statement you are not checking if the table has any entry or not , please do remember that for all entries has this characterstic , that if you internal table does not contain any record , then all the records are selected from the database table. So in this case if you table a363_itab is empty , so what you want is no data must be seelcted from table konp , but what will happen is all the records in KONP will be seelcted.
2. While retreiving data you are using seelct * even though you do not require all the fields , an example is
<b>SELECT *
FROM mkpf
INTO CORRESPONDING FIELDS OF TABLE mkpf_itab
FOR ALL ENTRIES IN mseg_itab
WHERE mblnr EQ mseg_itab-mblnr.</b>
in this your internal table contains only 2 fields
<b>mblnr LIKE mkpf-mblnr, "Number of Material Document
bldat LIKE mkpf-bldat, "Document Date in Document</b> , but to get these 2 fields you are selecting all the fields of the table.
3. In select you are using into corresponding fields of table , it is not a good practice., so please avoidd it.
Please understand that you must try to reduce the access to your database tables and try to keep it minimal , because this same thing may happen becasue data in DEV is very less compared to the volume of data in production , so a program working in DEV will take much more time in PRD if not written properly and may result in timeouts , as in your case.
Please try to make chanegs to the prorgam and see if it works.
In case you have more queries , please do revert back.
Regards
Arun
*Reward points if replay is helpful

The file to download the app for Android is not working from my phone--it says that the file isn't there. However it does see the one for the Iphone (even though it can't use it). I'm very computer literate and am pretty sure the problem is on your end.

The file to download the app for Android is not working from my phone--it says that the file isn't there. However it does see the one for the Iphone (even though it can't use it). I've tried it multiple times and continue to get the same message: "NOT FOUND The requested item could not be found". I also tried through the Market application on the phone but ended-up with the same result.
I'm very computer literate and am pretty sure the problem is on your end. If this is the case then no one can download the app. I considered that perhaps because it's still in Beta that it was removed due to some other type of software issue. I would really like to use Firefox on my new Droid (2.0); when with this be available?

Firefox will not appear in the Market for most phones with incompatible hardware. You can check if your phone is supported here:
https://wiki.mozilla.org/Mobile/Platforms/Android
Even on some supported devices, a bug in the Market software prevents Firefox from showing up. This may be related to the fairly recent Android Market app update. If you go to Settings/Applications/Market and choose "Uninstall" you can uninstall the update, and then search for and install Firefox from the marketplace.
Or, if you have a supported phone, you can download the app directly by typing this address into your phone's browser: http://bit.ly/fxbeta3
(Note: To download the app directly for an AT&T phone, you will have to search for instructions on "sideloading" the APK file, since AT&T disables the option to install from non-Market sources.)

TS1702 i am using iphone 2G, i have updated IOS 3.1.3, but i am not able to use whatsapp. the newer version of whatsapp is not working in my phone. please give me the solution.

i am using iphone 2G, i have updated IOS 3.1.3, but i am not able to use whatsapp. the newer version of whatsapp is not working in my phone. please give me the solution.

As newer iPhones and iOS versions are made, apps start to drop support for the older versions of the iOS. It looks like you have fallen victim to this. I commend you for sticking with the original iPhone until now, but it looks like it's time for an upgrade if you want to use apps that have dropped support.
Also the new iPhone provides hundreds of new features and spec upgrades from the original. Check it out! http://www.apple.com/iphone/

HT4528 My iTunes is not working on my phone

I have restated my iPhone multiple times, and every time I click on iTunes, it closes and it won't let me download any music.

my itunes is not working on my phone can you give mr an anser

Airplay is not working with my phone and apple tv. airplay icon no longer comes up on phone

airplay is not working on my phone. icon no longer shows up. cant play music or videos on tv from phone anymore

As the original poster, I too had issues with my iPhone 4 (4.2.1) and Apple TV 2 playing nice. The Airplay icon was visible for music, and worked perfectly. However, when watching a video, purchased through iTunes, only the "audio" option would be selectable for Airplay. After updating the Apple TV software, everything works perfectly well. When watching a video on my iPhone and selecting the Airplay icon, one of the options is to play "video" through the Apple TV, not simply audio.
It would have been nice to know that my Apple TV needed an update when I updated my iPhone 4 to 4.2.1.

My power button is not working and my phone doesn't wanna turn on i've tried to charge it so it can turn on like it usually does but it's not turning on

my power button is not working and my phone doesn't wanna turn on i've tried to charge it so it can turn on like i usually does but it's not turning on

Hold down on the home button simultaenously holding on the sleep wake button (power button) hold it for more than 15 seconds this will then shut down the device.
If the device is already shut off do this same sequence to see if you get an apple logo. If you get the logo allow the device to login. Write back if this does not resolve your issue.
Good luck Friend.

Form is not working of multiple form check boxs, source posted. HELP.

Form is not working of multiple form check boxs, source posted. HELP.
I'm trying to have golive form be able to check one, two or all of the options in Graphics field.
As is it will only post results from the last checked box.
Here's the page
http://www.perfection-press.com/Pages/ContactForm.html
Here's where source in golive has scanning,design,filesupplied.
[code removed to fix forum topic display]

Since the checkboxes all have the same name, the values are over-writing each other when being passed to the PHP script. The best way to fix that is to add a pair of empty square [] brackets after the checkbox names, so make the names "graphics[]" instead of "graphics". That tells PHP that the values are being passed as a list (an array) instead of a single value. As long as your processing script knows what to do from there (and it does), should solve the problem.
By the way, I noticed that two of the checkboxes were named "graphics" and the other was "graphic" (singular). You'll want to fix that too so they're all the same.

HT1688 My volume down button does not work on my phone and the button on the top of my 4s does not work..I bought the insurance on the phone from apple when. It was new

My volume down button does not work on my phone and the button on the top of my 4s does not work..I bought the insurance on the phone from apple when. It was new

Check the status of your warranty here:
https://selfsolve.apple.com/agreementWarrantyDynamic.do
Make a Genius Bar appointment to have your iPhone checked:
http://www.apple.com/retail/geniusbar/

My sound is not working on my phone unless i put my head phones in, my phone is not on silent and can not here the ring when phoning someone...help

my sound is not working on my phone unless i put my head phones in, my phone is not on silent and can not here the ring when phoning someone...hel

Restart the device. http://support.apple.com/kb/ht1430
Reset the device. (Same article as above.)
Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
Restore as new device. http://support.apple.com/kb/HT4137 For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
Test the issue after each step. If the last one does not resolve the issue, it is likely a hardware problem.

Auto-Detect Screen Resolution Does Not Work Across Multiple Monitors With Different Resolutions

Hi,
The Acrobat Pro DC (15.007.20033.2203) auto-detect screen resolution feature does not work with multiple monitors at different resolutions. Acrobat looks fine on my hidpi primary laptop display (Razr 14" 2014) but is completely unusable if I drag or extend the application to a standard HD resolution secondary monitor. Dragging Acrobat from my primary desktop display to the secondary display causes the UI elements to become 2x as large as they should be and makes Acrobat unusable.
Is there a way to make Acrobat auto-detect the display that it is currently on?
Thanks!
-Donald

To prevent it from happing again, you can
1. go to the Mouse preference and turn off the scroll zoom feature.
2. go to the Universal Access preference and disable the zoom features.

HT1688 iphone 5 lock button not working. THe phone is 9 months old. What to do??

iphone 5 lock button not working. THe phone is 9 months old. What to do??

Then you still are in your Apple one year hardware warranty and can get it replaced/repaired.

Soundblaster X-Fi Titanium Optical Out not working???

Hey friends,
I purchased a Sound Blaster X-Fi Titanium PCIe yesterday to run on Windows 7 64bit to trigger VSTi instruments. I can hear the VSTi play fine when I have headphones plugged into the soundcard but I want to send the audio sound OUT via the Optical Out into my Steinberg MR86x firewire audio card. ?
I can see the light on the optical cable but no sound seems to be being sent from the sound blaster into the steinberg card.
?Now before people start saying you cant do that, I have have been doing this for the last 3 years and it has been great apart from my RME Audio card is not compatible with Windows 7 64bit hence why I purchased the soundblaster.
I really am at a loss as to what I can try next, I have been through this forum and tried a few recommended tweaks but nothing? Am I missing something obvious here?
I am using the following drivers
Driver: v2.7.008 Windows 7 64bit
DTS Connect: for Windows 7 64bit
Also in the Audio Control Panel / SPDIF I/O all options are greyed out apart from the Digital Output tickbox, I only want to use this card for Audio as in creating music or specifically for triggering VST synths.
I would really appreciate any advice
Thanks in advance
KiloHurtz

Re: Soundblaster X-Fi Titanium Optical Out not working?I have same card, same?OS?and lots of problems.
Analog outputs(control panel->sound->speakers) disappears when boot or reboot, sometimes it works week, sometimes a hours. When it works, it's works ok, but suddenly during boot,?all sounds is lost, when trying launch for example Creative Audio Control Panel this message appears: There are no supported audio device available. You need to close the application. Click OK to close the application now.
And when analog outputs disappears, no any sound via SPDIF, even it shows in notification area and control panel->sound and in device manager.
I have owned card about two months, once change card in warranty, and?several uninstall, cleaning traces, reinstall and card works for while?and?out of blue, when boot computer, no sounds at all and only way to get sounds back is driver uninstall, cleaning and reinstall.
Creative Customer Support seems to be clueless, but make Technical Support Request if problems continue. And all other too, if problems like that appears, contact to Creative, maybe they really try?to do?something abuot it and not just send instructions how to uninstall and reinstall drivers.

I have an Iphone 4 iOS 6.1.3 and have read that it is capable to receive the Weather Emergency Alert system. I have also been told that it will not. This is confusing. Can someone at Apple clarify. If it doe not work on this phone is a download available?

I have an Iphone 4 iOS 6.1.3 and have read that it is capable of receiving the Weather Emergency Alert system. I have also been told that it will not. There is no option in Settings / Notifications. This is confusing. Can someone at Apple clarify? If it does not work on this phone is a download available?

Apple usually doesn't participate here, we're just users. Have you done a search for an app for Weather Emergency Alert in the app store? It certainly doesn't come built-in in the iphone.

N8 TV-Out not working on multiple phones

Similar Messages

Maybe you are looking for