N8, unable to enter full WEP key for WLAN

I have a 28 character WEP key, but my N8 seems to be limiting me to 26 characters. I've tried it a couple of times & still the same, am I imagining it???
Any way round this?
Nokia N8 on Belle

there isn't a limit of 26 there unless maybe you need an update but i'd try resetting your device first, i've just had a look and i got over 30 characters before i stopped

Similar Messages

  • My new smart TV recognizes my network, & asks, "Please enter you WEP keys (10 or 26 hex digits)" but my netwotk uses a password of 6 characters. How can I get my smart TV to connect to my network?

    I have a current iMac with the latest OS update.
    My new smart TV recognizes my network, & asks, “Please enter your WEP keys (10 or 26 hex digits).  My  Airport Express, an early model, only requires a password of less than 10 characters.
    When I open “airport utility,”on my iMac it tells me this version doesn’t support my base station & says go to “Airport Service & Support.”  That’s what got me here.
    My earlier MacBook runs OS 10.6.8. Its version of  Airport Utility works. Its Airport ID has 17 characters, & uses the same password to access the internet, but it also has a “wireless password” of 26 characters, but only shows me the dots. i haven’t the foggiest notion  what the characters are, if I put them in there years ago when i did the original configuration, or if they got there otherwise..
    I’m afraid of changing those settings for fear that I’l mess up the whole thing.
    How can I get my smart TV to connect to my network, ?

    Please check out the following AirPort User Tip on how to recover AirPort passwords.

  • How to enter a WEP key

    I'm trying to join an existing wireless network of Windows machines. Connecting to the ZyXEL router software shows that it is using 64 bit WEP for its password and this is of the form 64 6F xx xx etc. However, entering this in the Airport configuration for the Mac does not allow me to connect. I've tried putting $ or & in front of the password to no effect. How do I enter this on the Mac?
    The Mac offers me 40 bit or 128 bit but not 64 bit. Is this relevant?
    Alternatively, if can I just change the router password to alphanumeric e.g. macfan?

    I've turned on 64 bit WEP on the router and entered a five letter password. I'm allowing broadcast of SSID while trying to fix this and the Mac can see the network but asking to join and selecting either just WEP Password or WEP 40 bit ASCII and entering the same five letter password, it fails to join and gives the error message invalid password.
    Bummer!
    an exact 5 ASCII character password should have worked for a WEP 40/64 bit key. But if it didn't, then it didn't.
    The router should be able to tell you the WEP Hex Equivalent Password. It should looks something like 1A2B3C4D5E (this is just a made up example, you must get the real hex value from your router). You enter this as the password.
    NOTE: Apple has played games with entering hex passwords over the years, and I DO NOT know the current rules, so I'm going to suggest you try 3 different ways to enter this hex value. One of them should work, or there is something else wrong.
    $1A2B3C4D5E
    0x1A2B3C4D5E
    1A2B3C4D5E
    One of these mentions of entering the WEP Hex Equivalent Password should work (I'm placing my bets on the leading dollar sign).

  • WEP Key for registering XP to use Airport connection?

    In my Windows XP partition, the computer recognizes my Airport card, and can access the hardware; however, it's not allowed to connect with my ordinary password, rather it's calling for a multi-digit "WEP Key" - How do I figure out what my WEP Key is to allow it access?

    Hi John,
    Go to Applications-Utilities-Airport Admin Utility,
    and click to open. Highlight your base station and
    double click to open the preference window. In the
    toolbar at the top of the window, click on Password.
    In the drop down you will see the Hex equivalent
    password (WEP key). This is the number you need to
    enter in XP.
    Thanks much!

  • How do i find WEP key for wrt54g

    Hi, my husband set up our system and i am trying to add a new wireless printer. He is out of the country for business, hence my problem. How do i find what the WEP key/ network key is? Thank you for your help.

    If you have other computer which had connected to this wireless network before, probably you can also use this wireless key finder on that computer to locate the WEP encryption key.
    Hope this helps.

  • Can't set WEP key for broadcom-wl?

    I did a fresh install of Arch this morning at my office. I have an Acer Aspire laptop with a Broadcom wireless card that works with broadcom-wl (I've used the driver for a long time and it works perfectly... with open or WPA networks). The network at my office is WEP. So after installing the drive, adding lib80211 and wl to my MODPROBE (and !b43 !ssb), I reboot and see my wireless as eth0.
    If I try to iwconfig eth0 key XXXX-XXXX-XX or iwconfig eth0 essid WIFINAME key XXXX-XXXX-XX, no matter what combination I try, I get an error saying that it's an invalid argument for SET_ENCODE. I've check the Wiki and man pages for iwconfig, and can't seem to find any solution. Does anyone know why I can't put in a WEP key?
    ((Side note: everytime I've installed Arch, my wifi starts out as eth0 until I get connected and run pacman -Syu. Then I reboot and it shows up as wlan0, and my Atheros ethernet is eth0 or eth1.))

    Thanks for a response. So this is a fresh-from-the-oven install. I usually get my wifi connection set up and then create my user and go about setting everything else up. Meaning I've been trying as root.
    I can see the wireless network with iwlist scan and it shows up as encryption key: on. Also, I tried using each lib80211 mod or some combination thereof in my rc.conf. No dice.
    Lastly, since I didn't include it before, here's the exact error I get when I try to assign a WEP key with iwconfig:
    Error for wireless request "Set Encode" (8B2A) :
    SET failed on device eth0; Invalid argument.
    UPDATE: I can set the key using [x] between key and XXXXXXXXXX. However, any combination I'm trying of essid and key/enc isn't showing up in iwconfig. No errors, but my iwconfig information isn't changing. It's progress... I think.
    UPDATE #2: I can iwconfig eth0 essid linksys (the office next to us) and grab that one (I don't know their password ) and it updates iwconfig, but our own network doesn't update iwconfig when I run iwconfig essid. >.<
    Last edited by mtcupps (2011-06-17 18:20:02)

  • Need help retrieving the full license key for Photoshop 7.0 in order to re-install CS3 upgrade.

    Reinstalling a licensed version of Photoshop CS3. It's an upgrade from 7.0 and it's asking for the full key for 7.0. Where can I find that?

    If you did not register with Adobe, this may help.
    How To Recover Your Lost Software Serial Numbers

  • I have an hp wireless d110a printer how can i get another wep key for it to set it up?

    Have a new HP d110a wireless printer how do i get or put in another key that it will take to finish setting it up to work? I need help. I had one of these before,and had to send it back, and HP sent me another one just like it. It will not take anything i put in it. How do i fix this. I went through all the steps, and it still does not take anything. Need help.

    Hi,
    Only you (or relatives) know your WEP key, it should be in your access point (AP), you can logon to it and check this out.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Unable to enter "QA OK date" for any Support Notification

    Hi ,
    We are not able to enter "QA OK date" for any Support Notification in solution manager.
    Recently we have migrated the instance from Windows to  HPUX. After the migration this problem occurring.
    Any idea?
    Regards
    Santanu

    Hello,
    If  the code you need to enter are numbers, you need to press the "function" key first (in the bottom left corner of the keyboard).
    Hope this helps.
    Regards.
    C3-00 V 08.63 25-03-11 RM-614 Variant: 00.00

  • How do you find the wep key for the wifi?

    I need the WEP key to be able to acess my wifi through my playstation. And i am unsure of which operating system to choose i know i have the most up to date one though

    Is the Wi-Fi network, provided by your AirPort Extreme, configured for WEP wireless encryption? If not, and is using WPA or WPA2 instead, then the Playstation is not properly recognizing the security type.
    Which exact version of the Extreme do you have?
    By operating system, are you referring to the one you are running on your computer? Is so, what is the make & model of your computer?

  • Unable to enter multiple Schedule lines for BOM material in Sales Order

    Hi All,
    We have a Sales Order where in which we cannot add additional schedule lines for BOM material.
    The schedule lines are greyed out, user was able to add schedule lines earlier.
    I have checked all assignments in VOV6, VOV7 and everything seems to be fine and no changes have been made to item category being used.
    Please provide a solution for this.
    PFB link in which similar situation posted in this community but the final resolution method is not discussed.
    http://scn.sap.com/message/13201504#13201504
    Regards,
    Samiksh

    Hi Samiksh,
    Pls check for that particular customer, only complete delivery allowed(c) is set in the CMR or CMIR. If so, you can't enter multiple schedule lines for that customer.. it would be grayed out in the sales order schedule lines except confirmed line.
    or check the problematic sales order at item level shipping tab if the par del/item is set to 'C'
    With regards
    S.Siva

  • Unable to enter a negative amount for payment

    I am trying to enter a negative amount for payments under order items, but I keep getting this error message:
    "The minimum accepted payment amount for 'Financing' is '0'. Please enter an amount greater than '0' to continue.(SBL-SFS-00167)".
    The payment method & type I'm using here is "Financing" & "CareCredit". But, when I enter the payment method & type as "Credit Card" & "Visa", I can enter a negative amount without any errors.
    I think this requires some configuration to override. Can anyone help me with this issue?
    Thanks,
    Raghu

    Hi,
    It's known bug.
    Bug number is 10499290.
    Visit/contact oracle support for more information.
    Good luck
    T.Abed

  • Unable to load Full Feature Software for Officejet 7410

    I have downloaded the current Drivers and Full Feature Software for my 7410.  The installation states that it completed successfully.  I do not have any new software loaded on my system.  I do not have the software access to any of the features that are on the 7410.  I can print, but the automatic two sided printing does not work.  I donot have the Photosmart application avalibale also.  My OS is currently Win 7 Professional.  Is there something I am missing to get the Full Functionality of my7410 back in service?   In the near future, I will have Wondows  10 installed.  Will there be an update available with new drivers and Working Software?

    Hi Teak37,
    I understand that you are having an issue getting the full feature software for your printer installed from the CD. I will try my best to help you get the printer installed. Here is a download for the HP Photosmart and Officejet Full Feature Software and Drivers. Download this file and save it to your desktop. Then follow the instructions in this document for Installing the Printer Software in Windows 7 for a Wired (Ethernet) Network Connection to install the software and drivers.
    I hope this information helps, let me know if you need further assistance.
    Thank you,
    I worked on behalf of HP.

  • Unable to write to registry key for Acrobat XI - error 1406

    Hi all,
    I have a problem regarding the installation of Adobe Acrobat XI 11.0.07 on an ASUS laptop with Windows 7 Home Premium OS.
    In short, I am unable to complete the installation of Adobe Acrobat XI on this machine because Acrobat is not able to write the value to the registry key situated here:
         HKEY_LOCAL_MACHINE --> SOFTWARE --> Microsoft --> Internet Explorer --> Toolbar.
    I tried to find solutions on the internet, and have found one webpage at the Adobe Forums, which is this one: Error 1406.Could not write value Adobe ARM - and it was not very helpful, since the person asking solved his problem, but did not tell how he did. So, I found this page at Acrobat Help, called Error 1402 | Error 1406 | Acrobat, Reader where I tried the different solutions, but so far none of these have worked. What I did was to remove all previous versions of Adobe Acrobat, Reader, Air and so on. In fact, I deleted all software from Adobe in case one of these softwares were to blame, but it has not worked. But before I deleted all this software, I deleted Acrobat and Reader several times, but as you probably already have found out, it did not work. As this did not work, I tried the next solution at Acrobat Help, which was to "Set permissions to their defaults in the registry". I followed the solution completely and did everything it said, but it has not worked. As a note, I have to say that the registry key type I have problems with is called "Locked", the type is REG_DWORD and the data value is (0). Does this have anything to do with it? I am not too familiar with editing the registry. Though, I did try to change the value to (1) and updating the registry, but it did not work...
    More information: nevertheless if I install the complete version of Adobe Acrobat XI or the typical installation, the same error comes up: error 1406. And I did scan my system with my antivirus software, called Bullguard, to see if there were any viruses; there were none. I also closed my antivirus software and diabled the firewall of Bullguard, but that was not succesful either, and I did a scan of my system using cmd as an administrator (sfc /scannow), and the program found some errors it could not fix. As far as I can see, it found three .dll files with errors. I have the document called sfcdetails.txt if that would be any helpful to you.
    Besides that, I am not sure what to do. I did pay for Adobe Acrobat the 23rd of January, 2015, and I have not managed to make it work properly yet, and I cannot update the software, since I have this problem with the registry. I am able to use the software for what I had to use it for until now, but I would like to be able to use it for everything it stands for and update it to prevent any lapse in security.
    Thank you. I hope you have any ideas for my problem and will be able to help me!
    Best regards,
    Mads

    Hi Rahul,
    Thank you for your answer. Though, it did not solve my problem! I did what you said: I tried using the Adobe Acrobat cleaner tool, and afterwards, I restarted my computer. After this, I downloaded the program from your link and I tried to install the program, but I did not succeed, because the same error came up, which is this:
         Error 1406. Could not write value {47833539-D0C5-4125-9FA8-0819E2EAAC93} to key \SOFTWARE\Microsoft\Internet Explorer\Toolbar.
    With this error, the only options are to abort, retry or ignore the install, but none of these solves the issue, I am afraid.
    But what I think it is all about is how to gain access to the registry. I followed the tutorial, I mentioned above, but I were not able to solve it... I gained administrator access to the registry, I made the current administrator account the owner of the key (the current administrator is not the original administrator of the computer, since I changed this long time ago), and I made the permissions correctly, I guess. I followed the tutorial, anyhow. Though, what confuses me, is that when pressing the button, called "Advanced", and entering the menu called "Advanced security settings for Toolbar" (I have the Danish version of Windows, excuse me if I did not translate it correctly), I see many persmission posts, two of which have the name of the current administrator account. One of these have full control, the persmissions from this are not inherited and they are used on "this key and underkeys". The second only has a special permission, it is inherited from "MACHINE\SOFTWARE\..." and it is used only on this key. How to change this, I am not sure. But I do not suspect that there should be two permissions for the same administrator account? Do you know if this is right?
    Thank you.
    Best regards,
    Mads

  • WEP key for Cisco 2100

    Hi
    I am having a lot of trouble trying to set a WEP, or any other key. When I am visiting 192.168.100.1 there is no option for log in or anything, only observe. The pages 192.168.0.1, 192.168.1.1 & 192.168.2.1 also time out every time. When I ping, these 3, it continuously times out too. It has been like that for some days. I have had this modem for around a year but only recently wanted to set up Wifi through a USB adapter and discovered this problem. I'm using windows 7, tried some drivers but they didn't help or weren't even compatible. PLease, can somone tell me how to get my WEP etc key so I can get this set up before Xmas?
    Edit: I have so far tried every suggestion from my ISP & information posted on the internet and nothing helped

    Hi,
    you should be able to access the controller by the following way:-
    Step 1 Connect your PC to the service port and configure it to use the same subnet as the controller (for example, 192.168.10.1).
    Step 2 Start Internet Explorer 6.0 SP1 (or later) or Firefox 2.0.0.11 (or later) on your PC and browse to http://192.168.1.1. The configuration wizard appears.
    it is possible that the issue is windows 7 which you are using. Please check with XP or any other machine to make sure windows 7 is not causing the issue. Please check the config guide for step by step access:-
    http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70intf.html#wp1142477
    Once you are able to access the controller, then you can setup WEP:-
    http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70sol.html
    thanks,
    Vinay
    If  this helps you and/or answers your question please mark the question as  "answered" and/or rate it, so other users can easily find it.

Maybe you are looking for