N8 WORLD TIME PROBLEM

Hello, I do not have the right world time on my N8. I am travelling at Moscow and my phone shows up 1 hour late the Moscow world time.
There is any way to fix it?
Thanks

Since last year Russia does not change time for winter time. Probably software in your phone "doesn't know" about this and it shows the time, like it was previously changed (mine shows the same). During the summer the hour will be correct, or sooner we will get an update, which will include new time-zones configuration.

Similar Messages

Hi , any body can send real time problems they faced

hi every body this is siva from banglore, any body can send the real time problems they faced in sap crm and how they solved if any body kindly send to my id : [email protected]

hi Siva,
All the issues in the forums are the real time issues
YOu can just go through them .
Also why do you need real time issues.
If you have any issues post it here and some one can help you

Message sent time problem

i have message sent time problem on my N73
the time is not correct in my message detail whenever i try to check it,note that it is message SENT time not RECEIVE time.however,other phones operate correctly even other brands of nokia like 1110.
please help me how can i get the correct time ?
moreover i iam in iran and set my time for iran

It's a bug that every N73 owners have.
Don't know why they didn't fix this until now, perhaps the didn't noticed this bug yet.
Feel free to hit the KUDOS button if you think I deserved it.........

World time widget time is wrong

A frustrating bug in Dashboard. I just reinstalled Tiger OSX 10.4.4. The widgets that are standard on dashboard include world time. Although my computer time is correct, the time that is displayed for Honolulu (Pacific Continent) is one hour off (early). I used to have the correct time for Honolulu displayed on this widget under Mac OS X 10.4.2. Is there a way for Apple to be notified and have this corrected? It was working in my 10.4.2. just one week ago, so it's not related to daylight savings. I think there is a bug in the widget. Thanks, in advance.
g4 Mac OS X (10.4.4)

I figured out why my time widget was off. I went into my preferences and set the time zone for Hawaii-Aleutian time zone. I apologize to Apple widget programmers for saying their program had a bug.

X301 post BIOS / Model Number update System Time problems

Dear community,
I recently updated my BIOS using the thinkvantage flash BIOS utility for no reason other than it appeared on the update utility. I also updated the model number, once again for no real reason other than update pleasure. Now, everything works perfectly fine on the system, and I have no problems EXCEPT:
I use New York Times Adobe Air product called "Times Reader". Since the update, when I try to log into the Times Reader I get an error that states "Authentication Error. Check that your system time is set correctly." In the pre-boot set up screen the time seems to be set right, and in the windows utility the time is set correctly. So my questions is,
after a BIOS flash / Model # update, does the system time function need some re-boot / update?
Thanks!

Well I still dunno what the problem was. It seemed as if the system would have to be running for a day or two before it would start to speed up, as if it was actually gaining a few milliseconds cumulatively every second...
Anyway, through other testing (OC & such) I flashed to 1.5B5 and it is running pretty good, and seems to have fixed the time problem.
On a side note, 1.5B5 is the first BIOS that actually makes Cool 'N Quiet work (to underclock to 1GHz at idle & dynamically OC when needed).
If anyone has experienced this time issue, please post findings! For now, it's fixed for me, so I'm not going to worry about it

Display world times in iView

I need to create a World Times iView to display the correct time (with automatic adjustment for summer time in each area) for say 5 or 6 different locations.
In a perfect world it would display something like:
London - Wednesday 15:28
Paris - Wednesday 16:28
is something like this possible? I would have assumed many corporate portals would have a need for a world time iView
Many Thanks
Richard

Have you tried this before?
http://www.sweetlets.com/
Itz a BP that imports all the cool iviews u wud need..Try it !! or you can atleast get an idea how it cud be done!!
Regards,
N.
Plz click a star if it helped.

Window 2008 R2 datacentre server time problem

Hi Team,
I have one window 2008 R2 data centre server, which having time problem, I have setted IST time zone but time coming 15 minute delay, I have tried to correct time by manual but time goes again 15 minute delay itself.
Please guide how to solve it and but i don't want to use NTP, as this server is on workgroup.
Regards
Inder Singh Rawat

Hi ,
I followed following step to build NTP in window server 2008 R2.
Enabling & Configuring NTP Server
1. Change the server type to NTP.
Click Start, click Run, type regedit, and then click OK.
Locate and then click the following registry subkey:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Parameters\Type
In the pane on the right, right-click Type, and then click Modify. In Edit Value, type NTP in the Value data box, and then click OK.
2. Set AnnounceFlags to 5.
Locate and then click the following registry subkey:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config\AnnounceFlags
In the pane on the right, right-click AnnounceFlags, and then click Modify. In Edit DWORD Value, type 5 in the Value data box, and then click OK.
3. Enable NTPServer.
Locate and then click the following registry subkey:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\TimeProviders\NtpServer
In the pane on the right, right-click Enabled, and then click Modify .In Edit DWORD Value, type 1 in
the Value data box, and then click OK
4. Specify the time sources.
Open a command prompt and type the command as below: w32tm /config /manualpeerlist:peers /syncfromflags:manual /reliable:yes /update
peers: time.windows.com or time.nist.gov
eg: w32tm /config /manualpeerlist:time.windows.com /syncfromflags:manual /reliable:yes /update
5. At the command prompt, type the following command to restart the Windows Time service, and then press Enter:
net stop w32time
net start w32time
i run following useful command.
1. To resynchronize time : w32tm /resync or w32tm /resync /rediscover
2. To verify the configuartion : w32tm /query /configuration and w32tm /query /status
3. Display the current time zone settings : w32tm /tz
Now what problem i am facing , when server goes restart "Window time service stoped" and ntp corrupted.
Even Window time service is set automatically, when i do configure again then NTP work proper.
Please help how to resolve this problem, if server restart NTP goes corrupted becuase of window time service stopped.
Regards
Inder Singh Rawat

TS3899 I can receive, but not send emails on iPad. All settings checked several times and with internet provider. imap settings confirmed as ok. Account deleted and set up under guidance of service provider several times - problem not solved - help!!

I can receive, but not send emails on iPad. All settings checked several times and with internet provider. imap settings confirmed as ok. Account deleted and set up under guidance of service provider several times - problem not solved - help!!

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
http://support.apple.com/kb/TS1944
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iCloud: Create a group and add contacts to it
http://support.apple.com/kb/PH2667
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

World Time options missing from all watch faces? Why?

No matter what I do, I can't see the World Time options on any watch face customization screens. The option is simply not available anywhere on any watch face. I do have two cities successfully shown in my world time app on the watch and of course on my iPhone.
Anyone else?

Thanks for the input everyone.
I have solved the issue it seems. To clarify, there were no options in any complication space on any watch face to show World Time cities. The options just weren't present anywhere. I have two cities setup on my phone's world time app, and those are mirrored properly on the watch's world time app also, which is why it was so weird that I couldn't make any of the complications be a world time clock.
I tried enabling the World Time Glance, and then all of a sudden I was able to put world time in the complications like I was expecting to.
Funny thing is - the whole point of doing this was to display my OWN local time (Ottawa) on the Mickey Mouse face cause it's semi-impossible to read easily, but my 2 year old son likes it.
Thanks again for the input!

Looking for FREE World Time Clock

Hi ALL,
As the title say's is that I'm looking for a FREE in use World Time Clock as a Witgets ore as a APP.
In this case I like to have more than 1 clock to see the TIME in different countries, continents.
I seen many already on the Internet ... but any help here I would appreciated.
Thank you for your time ...
Dimaxum

Hi,
Any one has a idea?
Thank you for your time.
Dimaxum

Found a glitch in world time feature

For the heck of it I have some world times set and I know Sydney is the first to change over to the new year. The iphone has the right time, but still says 07/12/31, as do all the other places as they enter the new year. I am going to watch to see if everything changes over to the new year once it hits in my time zone (us eastern time).
Have to wait and see

no, it is worse than that. Put a few cities in the mix from around the world... then change the date and time feature from automatic. Change the time and date to 00:29 1 Jan 2008 for the mountain standard time zone, suddenly the date for los angeles becomes 23:29 08/01/01. Anchorage is 22:29 08/01/01
Message was edited by: Rhyd

Occasional time problems?

i have my iphone set to automatically set the date and time. a few times since i've had it, the time is ahead one full hour...it seems to happen when the phone is shut down then turn back on, but i think one time it had the wrong time after being left on standby. any thoughts? is this an AT&T issue? i can't think of anything that could be wrong with the phone (or phone setting) which could contribute to this, since i'm chosing the automatic option for setting the time. small issue i know...just curious.

I have had a weird time problem also. The other night my husband was snoring and I couldn't get to sleep so I decided to get up and go into one of the other bedrooms. There is no alarm there, so I opted to use the alarm function on my iPhone to give me a wake up call. I set the alarm for 5am and sure enough, at 5am the alarm went off as expected. I went to the kitchen to make a pot of coffee and noticed the clock on the coffee maker said 5:11am. I looked at my iPhone and it said 5:01am. I then looked at my atomic clock and also the one on the cable box, both of which should be correct, and they both agreed with the coffee maker - now 5:12 while the iPhone said 5:02. I have the iPhone set to automatically update the time. Being in a rush to get ready for work, I did nothing about setting the time on the iPhone and decided I would reset it later. When I got to work, I remembered the time was off on the iPhone and decided to reset it, but when I looked it was now synced back to the correct time! I don't know if this was an iPhone, ATT issue or what, but I won't be depending soley on the iPhone alarm to get me up on time again. I haven't used the iPhone alarm since then so don't know if it is reproducable. Anyone else run across this problem?

Nano World time displaying wrong time!!

I just got hold of my ipod nano this morning. Was so looking forward to it till i found out later on that it wouldn't work with my 3rd party USB2 pci card. That was fine, i just used USB1.1 which took really really really long.
Finally, when it was done, i got to fiddling with it. I toggled to the World Clock and thought it'd be cool to fiddle with it. What i found was that the world clock is displaying all the WRONG times. I'm currently in Perth, Australia which is +8GMT. The ipod's main clock and date are all set correctly, and timezone set to Beijing, which is +8GMT equivalent.
But, when i get the world clock feature to display with my time, it displays 7AM (the real time is 3PM). It's the same with the other regions/times as well. Anybody else have this problem?
Hope somebody comes up with a fix
Thanks!

First, u pop the CD that came with the nano into your computer. Then, you locate the ipod software updater. Just launch that program, click and restore and follow the on scree instructions.
You should be good to go after that

App World Login Problems

Hi,
I'm having problems with my App World, I have a brand new phone (a week ago) of the Blackberry Curve 3G. I basically go onto App World, try to download an app, it asks me to login.
When I login, it asks me to agree to terms and conditions, which I've already done about 100 times. Then it takes me to the personal details page where I'm asked to change my password or view the privacy policy online or something. I don't want to change any of these, so I click save. and basically won't take take me anywhere else.
Every time I try to download an app it takes me to the login page. If i go out of App World and back in, it also asks if I want to update Blackberry App World, I click OK and it takes me to the login page where I get the same problem.
Anyone able to help me with this?
Kind Regards,
Snakespan

Do you have a blackberry ID to log in to app world? If you are not logged in it will take you to the login page. On the same screen you will need to put in your email and password, if you are not registered for BB ID you need to do so, or use the forgot password feature to reset the password. Go into appworld and check if you are logged in as well.

Null Date and Time Problem

I created my entity classes from a database by using netbeans 6.0 and I'm using H2 as a database. I've the following table in my database.
CREATE CACHED TABLE OPEN_TABLE ( ID INTEGER GENERATED BY DEFAULT AS IDENTITY(START WITH 0) NOT NULL PRIMARY KEY, TABLE_ID INTEGER, WAITER_ID INTEGER, OPEN_HOUR TIME DEFAULT CURRENT_TIME, OPEN_DATE DATE DEFAULT CURRENT_DATE );
and here is the entity class netbeans created for me.
import java.io.Serializable; import java.util.Date; import javax.persistence.Column; import javax.persistence.Entity; import javax.persistence.Id; import javax.persistence.NamedQueries; import javax.persistence.NamedQuery; import javax.persistence.Table; import javax.persistence.Temporal; import javax.persistence.TemporalType; /** * * @author Yupp */ @Entity @Table(name = "OPEN_TABLE") @NamedQueries({@NamedQuery(name = "OpenTable.findById", query = "SELECT o FROM OpenTable o WHERE o.id = :id"), @NamedQuery(name = "OpenTable.findByTableId", query = "SELECT o FROM OpenTable o WHERE o.tableId = :tableId"), @NamedQuery(name = "OpenTable.findByWaiterId", query = "SELECT o FROM OpenTable o WHERE o.waiterId = :waiterId"), @NamedQuery(name = "OpenTable.findByOpenHour", query = "SELECT o FROM OpenTable o WHERE o.openHour = :openHour"), @NamedQuery(name = "OpenTable.findByOpenDate", query = "SELECT o FROM OpenTable o WHERE o.openDate = :openDate")}) public class OpenTable implements Serializable { private static final long serialVersionUID = 1L; @Id @Column(name = "ID", nullable = false) private Integer id; @Column(name = "TABLE_ID") private Integer tableId; @Column(name = "WAITER_ID") private Integer waiterId; @Column(name = "OPEN_HOUR") @Temporal(TemporalType.TIME) private Date openHour; @Column(name = "OPEN_DATE") @Temporal(TemporalType.DATE) private Date openDate; public OpenTable() { } public OpenTable(Integer id) { this.id = id; } public OpenTable(Integer id, Date openHour, Date openDate) { this.id = id; this.openHour = openHour; this.openDate = openDate; } public Integer getId() { return id; } public void setId(Integer id) { this.id = id; } public Integer getTableId() { return tableId; } public void setTableId(Integer tableId) { this.tableId = tableId; } public Integer getWaiterId() { return waiterId; } public void setWaiterId(Integer waiterId) { this.waiterId = waiterId; } public Date getOpenHour() { return openHour; } public void setOpenHour(Date openHour) { this.openHour = openHour; } public Date getOpenDate() { return openDate; } public void setOpenDate(Date openDate) { this.openDate = openDate; } @Override public int hashCode() { int hash = 0; hash += (id != null ? id.hashCode() : 0); return hash; } @Override public boolean equals(Object object) { // TODO: Warning - this method won't work in the case the id fields are not set if (!(object instanceof OpenTable)) { return false; } OpenTable other = (OpenTable) object; if ((this.id == null && other.id != null) || (this.id != null && !this.id.equals(other.id))) { return false; } return true; } @Override public String toString() { return "OpenTable[id=" + id + "]"; } }
The problem is when I try to insert a new OpenTable to the database, Open_Date and Open_Hour columns stay as null. I want them to get the automatic CURRENT_DATE and CURRENT_TIME values. I can't see where the problem is because I used CURRENT_DATE and CURRENT_TIME words when I created the table. I don't have any problems when I use standart SQL statements to insert a new row. I just use INSERT INTO OPEN_TABLE(TABLE_ID, WAITER_ID) VALUES(2,3) and get current date and hour values automatically but JPA doesn't do that for me. What should I do to solve the problem?

Those database defaults are only applied when you use an INSERT statement that specifies a list of columns excluding the ones with defaults. Presumably your persistence code always sets all columns when it does an INSERT, so the defaults won't apply. You'll have to find the way to set the defaults in the persistence layer, not in the database.

N8 WORLD TIME PROBLEM

Similar Messages

Maybe you are looking for