N80 and BMW E91 NaviProf Bluetooth Problem

Hallo at all
Sorry for my bad english ;-)
My New Phone N80 FW 4.0623.0.41 RM-92 N80 (02)
My N80 is sucsessfuel couple to de Navi Prof from the Car, but only the headword N80 in the coupled Phones in Navi happens nothing?
Is ther a update for the Bluetooth for the N80?
Thanks
EDIT removed non english textMessage Edited by ajak on 13-Dec-2006
02:26 PM

Yes I do have 2: one Toshiba and one Microsoft.
Laptop seems to favour Toshiba - can I disable Microsoft or must I use that one?
So how do I go about disabling one of them?
Thank you for your help.

Similar Messages

  • Z87I - Windows 8 and Intel Centrino 2230 Bluetooth problem

    Hi MSI!
    This is my first message on the forum, and unfortunately it is about the problem i face (please forgive me if choose a wrong place to start this topic).
    I have just bought and installed the new Z87I (itx) board in my HTPC, and it seams that i cannot activate a Bluetooth on the integrated Intel Centrino 2230 card.
    I have installed Windows 8 Pro, as my OS of choice, and all the drivers from the disks i have received with the board.
    WiFi is working great, but I don't know how to access the Bluetooth settings so that I can connect my Bluetooth keyboard and phone.
    I have searched all over the internet for a possible solution, installed the new drivers from Intel website (15.8.0.0 and 3.0.1304) but I cannot find anything related with Bluetooth in windows settings (control panel, intel proset/wireless tools or in device manager). There are settings for WiFi, but nothing for Bluetooth.
    While I was looking in Device Manager, in Network adapters, I saw that Intel Centrino 2230 is recognised, and working proprly (even the Bluetooth AMP is set as Enable).
    Has anybody had similar issues with this card and Bluetooth settings??

    Quote from: DuckyLee on 12-August-13, 17:29:43
    Hi MSI!
    This is my first message on the forum, and unfortunately it is about the problem i face (please forgive me if choose a wrong place to start this topic).
    I have just bought and installed the new Z87I (itx) board in my HTPC, and it seams that i cannot activate a Bluetooth on the integrated Intel Centrino 2230 card.
    I have installed Windows 8 Pro, as my OS of choice, and all the drivers from the disks i have received with the board.
    WiFi is working great, but I don't know how to access the Bluetooth settings so that I can connect my Bluetooth keyboard and phone.
    I have searched all over the internet for a possible solution, installed the new drivers from Intel website (15.8.0.0 and 3.0.1304) but I cannot find anything related with Bluetooth in windows settings (control panel, intel proset/wireless tools or in device manager). There are settings for WiFi, but nothing for Bluetooth.
    While I was looking in Device Manager, in Network adapters, I saw that Intel Centrino 2230 is recognised, and working properly (even the Bluetooth AMP is set as Enable).
    Has anybody had similar issues with this card and Bluetooth settings??
    Have you had any resolution to this yet?

  • HT204387 4s and 2012 Toyota Sienna bluetooth problems

    I have a 4S, and I am trying to connect with my 2012 Toyota Sienna bluetooth.  However, when the bluetooth is requesting to enter a password into my phone (last step), the phone goes into an ''non-connect'' mode. Please help...

    I had to delete the pairing and reconnect.  I set up both the phone and the Bluetooth audio.  It caused the problem and when I deleted the pairings and reconnected as a phone with internal audio it works fine for phone and media.

  • Macbook pro Late 2011 13.3 inch i7 keyboard and trackpad not working bluetooth showing a cross sign and no usb mouse is detected. Almost dead keyboard and mouse. Earlier same problem used to be solved by opening the lower cover and closing it.

    My macbook pro 13.3 inch i7 late 2011 edition has previously encountered unresponsive trackpad and keyboard. To solve that, I used to open the back cover and then close it. It has been working fine since that. Yesterday, same thing happened, this time I noticed that bluetooth icon is showing a cross sign across it and keyboard and trackpad were unesponsive. After some time , everything worked fine and bluetooth sign was back to normal. Then , suddenly it went back to the problem. I shut it down by holding the power button. When I booted it again, I could not login because keyboard and trackpad were not working. I attached a HP mouse it didnt work. I opened the back cover disconnected the battery and then connected it again, didnt worked. Since then , I have tried many things and nothing has solved the problem.

    @sanjampet
    As you suggested I reset the smc, in the first boot nothing worked. In the second boot, it all worked like a charm. I thought that my problem is resolved now. To test it, I shut it down properly. Next morning, I powered it on, all things i.e, keyboard, trackpad, bluetooth etc. worked and I thought that problem has been solved. When I was just going to visit apple forum to reply you,  the same problem reappeared. A sawtooth cross over bluetooth icon, keyboard not working, trackpad not working,no usb mouse working which worked well when it was fine. I reset smc so many times again and again but same problem continued. Isn't it a problem of the firmware?
    Next time when it will work, I will update its firmware.
    My macbook was bought in dec2011 so no warranty now.

  • I have an Iphone 4s and i can't make a connection to my mac and other devices via bluetooth! Why is this a problem and how can i repair it?

    I have an Iphone 4s and i can't make a connection to my mac and other devices via bluetooth! Why is this a problem and how can i repair it?

    "I have an Iphone 4s and i can't make a connection to my mac and other devices via bluetooth! ":
    That is correct.
    "Why is this a problem and how can i repair it?"
    Becasue this has never been a feature of iphone/ipod/ipad.  There is nothing to repair.

  • Bluetooth is no longer working on iPhone 4s.  It used to work very well. Not any more. Have tried reset network settings and all settings, no joy.  Never had bluetooth problems before.  Have tried connecting to other peripherics nothing works. Can you hel

    Bluetooth is no longer working on iPhone 4s.  It used to work very well. Not any more. Have tried reset network settings and all settings, no joy.  Never had bluetooth problems before.  Have tried connecting to other peripherics nothing works. Can you help?  Thank you.

    Bluetooth is no longer working on iPhone 4s.  It used to work very well. Not any more. Have tried reset network settings and all settings, no joy.  Never had bluetooth problems before.  Have tried connecting to other peripherics nothing works. Can you help?  Thank you.

  • Bluetooth problem in ideapad s210 touch windows 8.1 and audio problem

    Hi .. i have lenovo s 210
    i have a problem with audio output, the sound is muted and it said that my bluetooth audio device can not be started. i download realtek High definition from the support system and the audio system start working again. But when i check the device manager the bluetooth problem still not fixed. It said i had a code 10 problem. I just recently update my windows to 8.1, but before there is no problem with the audio... and recently i find out that i can not use my bluetooth too. and all the bluetooth system seems doesn't work out
    what should i do??
    thanks

    Actually, I solved this issue myself after a while.
    I induced a system restore prior to the date when I began to experience this error.
    It then happened once more, so I went to the "PC Settings" menu and selected "Update and recovery".
    There were apparently updates to be installed, so I clicked "More details/information", and found that there were 3 Intel-related drivers that were listed, but for some reason, Windows 8 didn't automatically install them, so I checked each one of them and proceeded to install them and it has been smooth sailing for me ever since that.
    SO.
    A piece of advice for all those who have experienced the issue I detailed in my former post:
    Check what updates need to be installed on your computer in the "PC Settings" app thing, and see if there are any driver-realted updates (like for your graphics card, especially).

  • Radio and Bluetooth Problem

    I have bought Lenovo P780, but even after inserting headphone I have not been able to listen to radio and also while using bluetooth head set I can hear the other side clearly but the other side cannot hear what I say. I have changed at least 10 bluetooth sets but the problem persists.
    Please Help

    Hi Shlomi1204,
    Welcome to Lenovo Community!
    As per the query we understood that you are facing issue with Wifi on your ThinkPad Edge E330.
    The warning indicates that Wifi is not enabled, and to enable it you have to press FN+F9 simultaneously. When you press this key, a list of wireless features is displayed. You can quickly change the state of each feature on the list.
    Notes: If you want to use this button to enable or disable the wireless features, the following device driversmust be installed on your computer beforehand:
    Power Management driver
    Onscreen Display Utility
    Wireless device drivers
    For detailed information on the wireless features, refer to “Wireless connections” on page 29 from the user guide.
    Hope this helps.
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • My iphone 4s wifi and bluetooth problem after updating ios 8? please help me...

    my iphone 4s wifi and bluetooth problem after updating ios 8? please help me...

    Hey there Abdulrahim0259,
    I would recommend that you use the following 2 article to help troubleshoot the Wi-Fi and bluetooth issues you are seeing, respectively:
    iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
    And:
    iOS: Troubleshooting Bluetooth connections - Apple Support
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • To Nokia - Bluetooth problems or 6300 and 3110

    Dear Nokia,
    Please, please you are killing everyone with your Nokia bluetooth phone incompatiblity.
    What do you guys intend to do?
    Do you acknowledge there is a problems.
    I bought a 6300 when I lost the best Nokia ever phone 6230i.
    The bluetooth connectivity is appalling.. Echoes and cut outs plague the receiver of your call.
    So far bought BH200 useless, HS26W Jabras do not work, and BH100 does not work.
    I then thought it was the phone, but so bought another 6300 it also has the same problems.
    I then bought the 3110 classic which actually has a lovely keyboard layout. The phone is great, but the bluetooth problems are the same/ slightly better.
    Nokia Uk are not helpful... They just say return the phone to o2. They live in denial...curse on their houses.
    Nokia has beeen very sloppy on this bluetooth issue. They will kill their business. They have lost my loyalty...
    I am now faced with buying a Samsung. Sonys are terrible and Blackberrys are too small to use in a moving car.
    My hi-tech friend says it is incompatible bluetooth software on the phone. Nothing you can do till NOkia acknowledge the problem and send out a new patch..
    Edit: removed e-mail addressMessage Edited by scousermodman on 25-Sep-2007 11:10 AM

    I am also having the same problem.
    I have a 6300 and a Samsung WEP150 headset.
    The headset works fine with My SonyEricsson W810i and I can also transfer contacts between the W810i and the Nokia 6300 using bluetooth but for some reason the 6300 can't see the headset.
    Seems like Nokia haven't got thier bluetooth implementation quite right (At this point it seems the most likely cause). If they can provide a solution I'll be very happy to be wrong.
    I'll let you know if I find a solution.

  • N80 and Motorola IHF1000 Bluetooth car kit

    Hi all,
    I've been unable to get my Nokia N80 to correctly pair with the standard bluetooth car kit supplied with the car. I have also downloaded the latest firmware, but this does not seem to rectify the issue.
    Is there another solution instead of moving to another phone manufacturer?

    I'm now with Sony Ericsson and the above post should have been my last were it not for a rather belated response to my enquiry with Nokia 'Support'. Moderators really should take note to the response that Nokia 'support' team offer as it is in their direction that the moderators will often send bemused Nokia owners who need help on this forum: - -------------------------------------------------- Dear Mr xxx Thank you for contacting Nokia Helpline. With regard to your email concerning the Nokia N80, we can advise as Nokia do not test out handste with any third party software or deivices we can not say wether they will be compatabile. Please don't hesitate to contact us again if you have any further questions. With best regards UK & Ireland Team Nokia Helpline ---------------------------------------------------- It has taken the best part of 3 weeks to receive the above response which, quite frankly, offers absolutely no help whatsoever!! Quite an admission though. Just to repeat what they have said above....NOKIA do NOT test their handsets with ANY third party software or device. This leaves owners such as myself, who spec car-kits at he point of buying a new car because they prefer the integrated equipment rather than an 'add-on', completely high and dry! I still have the N80 and intend to keep it as a constant reminder NEVER to buy anything made by Nokia again. ttfn

  • Water and macbook air- bluetooth problem

    I spilt a whole glass of water over my macbook air, I dried it off and put it straight in the airing cupboard for 5 days. When I came to turn it on I could hear a high pitched buzzing noise coming from the top of the keyboard. I powered down and performed a SMC reset and it came back on with no noise. Everything seems to be working now apart from the bluetooth. Have I got lucky?- if I take it to Apple about the bluetooth problem will they blame water damage, is it any easy fix?
    Thanks

    Thanks Linc.  Tried all of that but still nothing.  I can't help get the feeling that it's me doing something stupid but I've never had this problem with my iPhones, iPads or iMacs.

  • My iphone wifi problem wont detect any wifi networks and wont detect any bluetooth networks.

    my iphone wifi problem wont detect any wifi networks and
    wont detect any bluetooth networks.

    https://support.garmin.com/support/searchSupport/case.faces?caseId=%7Bb62e0460-4 d48-11e3-f27b-000000000000%7D from the Garmin Support site.  The iPhone 4 is not compatible because it does not support the low energy bluetooth transfer that the iPhone 4s and later do.
    It should connect properly with your iPad mini, but it requires an App.  Also mentioned on Garmins' site.

  • I am traveling and cannot connect my bluetooth keyboard to my MacBook Pro where I am. It was working fine when I left home. What can I do to fix the problem?

    I am traveling and cannot connect my bluetooth keyboard to my MacBook Pro where I am. It was working fine when I left home. What can I do to fix the problem?

    If you can get them paired again try making them "favorites" from the Bluetooth system preferences.
    Try smc and pram reset too.  May gave to do this before you can get them paired.

  • N* and bluetooth problem.

    I have just got a N8-00. I am trying to pair a Nokia BH-102 bluetooth earpiece to the phone. The N8 does not recognise the presence of the BH-102. I know the BH-102 works because it worked fine with my last phone (Nokia 6230i) and it appears the bluetooth on the N* works because I was able to transfer the contacts from the old phone to the N8.
    I have updated the software on the N* to that which is currently availble. I cannot see what I am doing wrong so any suggestions would be welcome.
    Solved!
    Go to Solution.

    Dear chaucer0976,
    Welcome to the Nokia Discussion Forum and thank you for your most recent post.
    You have to set the BH-102 to discovery mode before the N8 will see it. To set it to discovery  mode, do the following.
    1 Select Menu > Settings and Connectivity > Bluetooth > On.
    2 Switch the headset on.
    3 To pair your device and the headset, open the Paired devices tab.
    4 Select the headset. If the headset is not displayed in the list, to search for it, select Options > New
    paired device.
    5 You may need to enter a passcode. For details, see the user guide of the headset.

Maybe you are looking for

  • HP Pavilion dv7-6b21sm Entertainment Notebook PC Motherboard - disc info

    Hello guys I have pavilion dv7 series laptop like it's stated up in the subject I bought cable with conector for 2nd disk. Now the question is what speed is possible through this cable or what my motherboard supports? I want to install SSD disk insid

  • Fastest way to create DVD Movies

    I have a ton of Mini DV tapes that I want to convert into DVD's. I am not real interested in editing the content. I would just like to have DVD's with automatic chapters inserted either on each day change or on each event (camera record button presse

  • Spanning Columns, Messes TOC Order

    Hello I have earlier posted a thread with my problem. See: Re: TOC Problem, Wrong Order, Connected/Unconnected Text Frame Now when the problem is tracked down (spanning of columns) I choose to create a new thread hoping that someone has encountered t

  • ORA-12519: too many new conenctions

    Hello, with 10.2 XE the number of PROCESSORS is limited to 40, the Problem exists with the Listener that it quickly starts to refuse new connections with ORA-12519, even when the maximum number of connects at the same time is not reached. At least th

  • How can i submit all entries of a select ?

    i have used "request.getParameterValues("selectNamer")",but it just returns the selected entry. can anybody help me? thanks in advance.