N80 and CK-W7 Car Kit

I have just bought a Nokia N80 and when I plugged it into my CK-W7 car kit via the Pop Port cable I found that the remote button on the car kit didn't work. With my old 6680 the button would answer calls, hang up and activate voice dialing. With the N80 I get a beep and that all. I've played around with the settings on the phone but nothing has resolved the problem yet. Is it a problem with the N80 or is it the operator's software? I bought the phone through Orange in the UK.

Lots of people are having problems with car kit it would seem. Just like I always say, take it to a service point and see if there is a Service upgrade for the bluetooth or maybe a firmware upgrade will fix it? I had problems with a headset and the service upgrade fixed it perfectly.
Is that an N95 in your pocket or are you just pleased to see me?!?
Life's too important to take seriously.
Nokias I've owned 3210, 3310, 6100, 7650, 6600, 6680, 6630, N80, N95
I'm a 26 year old boy BTW

Similar Messages

Alltel 8130 and Nissan Bluetooth Car Kit

HELP!!! New Nissan Altima with Bluetooth Car Kit. I am able to pair no problem, make and receive call without a hitch. Downloaded phone book with ease. The problem is whenever I use the phone with the car kit after I exit the car the phone locks up, keys do not respond and I have to do a battery pull to reset the phone. No problem until I use the phone in the car again (with the bluetooth kit). Any help or suggestions are appreciated. I do have the latest OS (4.5.0.89).
Solved!
Go to Solution.

Problem Solved: I went to Alltel store and they adviced I do a manual disconnect from the phone before I turn off the car, this seemed to work so since I placed ther Bluetooth icon on the frontpage of my phone it seems to be working fine without having to manually disconnect. I do not quite understand why it works now but it does.

1.1.3 and Parrot Bluetooth car kit problems and solution

I've discovered a potential fix with help from the good folks at Parrot Bluetooth devices technical support. The main issue with version 1.1.3 upgrade and car kits appears to be when the iPhone attempts to sync contacts with the BT device. Apparently, something changed in 1.1.3 about how Apple sent contacts through BT. To fix it on a Parrot car kit, first delete the iPhone from the list of paired devices on the car kit. Then unpair the car kit on the iPhone. Pair the two devices following your devices instructions, only with contact synchronization disabled. On my 3200LS this meant selecting "Disable Synchro" from the phone pairing list. The connection was quick and rock solid after doing this.
I have seen reports of this same solution working with Ford Sync devices also, and it may address some of the Garmin issues too. Obviously, this isn't ideal since you won't have any contacts or at least will have to manually enter them on your device. But it should get you through until Apple devises a fix in a near future (hint Apple) upgrade.

Klash,
Try updating to iPhone 1.1.4, and see if your issue is resolved.
Hope this helps,
Nathan C.

X6 and Parrot CK3100LCD Car kit

I have been using a Nokia 6600 fold with the Parrot car kit very successfully. I've now switched to the X6 which pairs with the car kit most of the time and works initially but then, for no apparent reason, I cannot hear the caller, even though they can hear me perfectly.

Klash,
Try updating to iPhone 1.1.4, and see if your issue is resolved.
Hope this helps,
Nathan C.

Help with a E50 and a Audi Car Kit

Hi
Have used Nokia for many years and for teh past 2 have used a Nokia 8800 with my Audi Car kit, never had any problems before because I culd choose to use the contacts on my SIM card, on the E50 I cannot do this, Have gone through teh SIM access profile to no avail. I can still use the car kit but cannot scroll through my contacts via the steering wheel.
Please help!!!!!!!
Steve

public class MyServlet extends HttpServlet {
     public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
          response.setContentType("text/html");
          PrintWriter out = response.getWriter();
          Connection conn = null;
          String Form1a = request.getParameter("Form1");
          String Form2a = request.getParameter("Form2");
          // do all your database stuff
          // if Form1a and Form2a are valid values
                MyBean bean = new MyBean(Form1a, Form2a);
          request.setAttribute("valid", bean);
   class MyBean{
           private String form1;
     private String form2;
     public MyBean(String form1, String form2) {
          this.form1 = form1;///////////////////////////////////
          this.form2 = form2;//////////////////////////////////
     public String getForm1() {
          return form1;
     public String getForm2() {
          return form2;
     public void setForm1(String form1) {
          this.form1 = form1;
     public void setForm2(String form2) {
          this.form2 = form2;
NB: you can also declare your bean in a separate java file. In this case, you have to add public to your class definition : public class MyBean ...A servlet has a log method to display messages :
http://java.sun.com/products/servlet/2.2/javadoc/javax/servlet/GenericServlet.html#log(java.lang.String)
hth

Nokia N96 and Rover Rover Car-Kit

Hi and Help!
I hope someone can throw some light on a problem I'm having with my Nokia 96 (on 02), which I upgraded from an N95 8Gb at the beginning of December 2008. I have had numerous Nokia Phones (and a Blackberry) all on 02 and all working well with the built in car-kit in my Range Rover Sport. The two are connected via Buluetooth, but I am experiencing the following problems:
Everytime I get in the Car with the phone, it asks if I want to connect and asks me to input the code which I do and it connects. It is listed as authorised but I still have to go through this procedure each time.
When I'm on a call, the quality is good, but after a couple of minutes, I can hear the person on the other end, but the speech is very clipped, and they cannot hear me and as long as we both persevere, the call continues and returns to normal after 20-30 seconds but this issue is repeated every few minutes for the duration of the call. This happens whether I make or recieve calls.
Some of the things I have tried but which have not worked:
02 have replaced the phone and I'm now on my second, brand new unit.
I upgraded the software on both and I'm currently running 12.043, 26/11/08
I have had Land Rover look at the car kit when it was serviced yesterday (26/01/2009). They confimed they had tried it with other Nokia phones and it was working correctly and could not replicate the fault, albeit they weren't using an N96
I have independently checked the Land Rover webpages and confimred that the N96 is compatible
Partial and full reboots.
Deleting and setting up new Bluetooth connections
Changing the Network from Dual to GSM only
Trawling through N96 and Land Rover forum looking for some sort of clue, and I can find absolutely nothing anywhere else!
I hope someone can help as I'm finding this increasingly frustrating and it's knocking my faith in Nokia products, and I'm considering returning to my N95.
Many thanks

Hi,
Have got almost the same problem as you detailed below, however call quality when connected is fine. Even have the same car. Got a brand new N96 after two weeks but it is exactly the same, keeps requesting the pairing and code instead of connecting automatically.
If I cannot get this sorted I will swap for another cheaper phone that will work. Basic Nokias do the trick. Like Nokia have never used anything else.
I hope someone can throw some light on a problem I'm having with my Nokia 96 (on 02), which I upgraded from an N95 8Gb at the beginning of December 2008. I have had numerous Nokia Phones (and a Blackberry) all on 02 and all working well with the built in car-kit in my Range Rover Sport. The two are connected via Bluetooth, but I am experiencing the following problems:
Everytime I get in the Car with the phone, it asks if I want to connect and asks me to input the code which I do and it connects. It is listed as authorised but I still have to go through this procedure each time
Any help would be appreciated but I am guessing that there isn't any,
Thanks
VoteforPedro

Tour and Bluesky handsfree car kit 1001B

This Hands Free car kit had tons of kudos from recent media , It does not connect with my Tour ! It will pair fine but "fails" everytime I try to connect. I have paired and connected both devices with other phones etc and no problem. Is there a softwear fix or something? Hear is the devices website.
http://www.blueskytechusa.com/bluesky_product-information.html

Cool!
I'm glad you have it fixed.
I didn't "get" algebra the first time around!
Thanks,
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

3109 and THB Bury car kit

Hi all
My 6021 packed up and the company have given me a 3109. The old 6021 worked perfectly with my THB Bury car kit but with the new 3109 pluged in using the new adaptor holder - The person I am calling says that it sounds like my head is in a bucked and there is a constant buzzing such that they almost cannot understand me.
the software version on the phone is V05.30 16-05-07 RM-274

i've got the same problem with my one , would love to know how to keep the back light on

Nokia 6120 and BMW bluetooth car kit compatibility

I am having a compatibility problem between my blutooth kar kit of my BMW 320D (July 2006) an my new telephone Nokia 6120.
I can make phone calls and receive phone calls, but the address book is not displayed on the car's screen.
Everything was working fine with my previous phone, a Nokia 6234.
Could somebody help me on this matter?
Is there any software to download that can enhance the full compatibility?
Thanks

Hello,
Have you solved this issue. If so how.
MAny thanks
30-Oct-2007 01:31 PM
aticci wrote:
I am having a compatibility problem between my blutooth kar kit of my BMW 320D (July 2006) an my new telephone Nokia 6120.
I can make phone calls and receive phone calls, but the address book is not displayed on the car's screen.
Everything was working fine with my previous phone, a Nokia 6234.
Could somebody help me on this matter?
Is there any software to download that can enhance the full compatibility?
Thanks

6230i and CK-7w car kit

Having problems when phone is removed from cradle, several things happen intermittantly.
1 A message appears " use as data storage device" wether I accept or reject this it just goes into a loop asking the same question.
2. The power saver "clock" stays on the dislay and the phone locks up, or turns off.
3. The display freezes ,only diplaying half the screen and the name of the contact, and phone locks up, when the first call is recieved.
The only way to cure this is to switch off/on. As the phone switches off,only the red diamond on the shut down animation appears.
Another question should the phone mute the radio even when accepting messages such as "charging" and "battery full".
Also when in the cradle should the phone show charging after a call is made or recieved even though it was showing fully charged seconds before, does it not use the power from the car to power it when in the cradle

You need to get a newer software version for your 6230i, this was a common problem when it was introduced last year, and nokia service center will help you with this.
Danny b
Nokia Accredited Installer
If my answers help you, give me a Kudos. Its like a pat on the back.

CU-7 and CUW-2 Car Kit Buttons

I am upgrading my CARK-112 to CK-7W to support my N95 8Gb. Was led to believe that all of the CARK-112 accessories would simply plug into the CK-7W. Have now discovered that the button (CUW-2) in the CARK-112 terminates with an RJ45 whilst the CK-7W socket for the button is an RJ11. Question therefore is "are the pin assignments for the two plugs the same and therefore is it simply a case of replacing the RJ45 plug with an RJ11? If not then what are pin assignments of the two connectors so I can rewire it correctly?"
Many thanks

If you hold the button down for 5 seconds it should switch off.
The problem here is that the kit has been installed with the blue ignition sense wire connected to a permanent live.
If you want an installer to look at it and correct this so it works properly then you can enter your postcode here on the Nokia site and find your nearest accredited installer.
It should be a simple fix.
Moderator Note: Removed dead link.
Message Edited by linwood on 04-Feb-2008 10:44 AM

6230i and CK-7 Car Kit cradle

I'ved used mu 6230i with bluetooth on the CK-7 with no issue. I've just had a cradle fitted and when I remove the phoen it quite regularly just gives me a white screen and I need to reset it. Is this a known issue ? Is there a fix ! My firmware is 3.40 dated 23-05-05 - is there a more modern version and how can I get it ?
Iain

Hi Guys!
Just to let you know 3.46 isnt compatible for all the networks in the UK.
If you need to get the phones software updated please speak with your Nokia Service Point, they will be able to install the correct software for your phone/network.
Cheers
Karim

N80 and Parrot CK3000 Evolution BT carkit

I have an N80 and above Parrot car kit, both with the latest firmware. However, the phone doesn't auto connect to the car kit with Bluetooth switched on (despite selecting this option when pairing).

Pick an unused profile and turn everything off in that profile except for what you do want.
This includes keypad tones etc.
I have everything off except for call and message. Calls are set at 2 beeps and messages at 1 beep.
Vibrator, breathing light, keypad tones, video calls, warning tones, etc are all set to off.
I renamed this profile (I used the "pager" profile) to "Car"
Under Menu > Tools > Settings > General > Enhancement set the "Headset" to use the profile you just configured for this purpose.
I have tried the "Wireless Car Kit" but found that it mine actually uses "headset" so I have set that as the default with my "Car" setting.

Bluetooth and car kit

Hi, I have aproblem with the iPhone Bluetooth. The car systesn is able to recognize the iPhone and viceversa, then the car system asks to dial a passkey both on the car (easy) and on the iPhone: here I have the problemn sicne I don't know what to do, since no keyboard is available on the iPhone part regarding bkettooth: just if it is active and if it is able to find a device. So at he end nothing happens and the abilition of the is always "failed". What can I do?
Thanks a lot
MAC 3

Use the iPhone to 'find' and set up the car kit rather than the other way around (using your car to find and set up the iPhone). Go to settings, then general, then bluetooth - the phone will search for and [hopefully] find our car kit (you'll need to read your car kits manual and set your car kit in discoverable mode), then touch the car kit and the iPhone's 'keyboard' will appear asking for your car kit's pass code. Key that in and presto... done...

Car Kit Pairing with Peugeot 407

Hi all,
I have an iPhone 3G with iOS4 and a bluetooth car kit (manufacturer's) in my Peugeot 407SW.
Problem : My iphone pairs with the kit, it receives calls and I can make calls. However, when I go to the Telephone Directory and the Calls List, every entry is named as 'battchg' - so I have to scrutinise the numbers to see who I am calling - which is pointless.
So, wither all of my friends and family need to change their names to battchg or - can someone help please ???!!!
Thanks
o10

4.1 does not fix everything as my Peugeot 407 does not ring when I have an incoming call, it's silent and I have to watch the screen on dash which defeats the object. Also it just says incoming private number, please sort this out apple. Thanks.

N80 and CK-W7 Car Kit

Similar Messages

Maybe you are looking for