N80 Bluetooth issue still unresolved : WORST NOKIA...

I am tired of Nokia N80 problems. I was one of the first buyers. ( early buyer = alfatester) After two firmware upgrades and three months bluetooth connection is still absolutely unreliable. Soon this phone will be out of date. Waste of my good money. Lisperit

02-Aug-2006
10:07 AM
aumsu wrote:
1. Holux / GPSlim236 bluetooth
www.holux.com' target='_blank'>http://www.holux.com' target='_blank'>www.holux.com
2. from the site:
Input/ Output Interface:
I. Compatible Bluetooth Serial Port Profile (SPP), Version1.1 and class 2(up to 10 meter range).
3. what bluetooth profile is?Message Edited by aumsu on 02-Aug-2006
10:10 AM
ok, i checked this out.
the holux device only uses the serial port profile and bluetooth specification 1.2.
however, the also supports the serial port profile 1.1 - so there should be no problems at all with this.
the only other thing i can think of is the gps device is disconnecting the phone or dropping the connection. it would be good to hear from someone who owns the nokia gps device to see if the same thing happens.
sorry i couldnt help more

Similar Messages

  • N80 Bluetooth Issue ??

    I've been trying to get sat nav software for my Nokia N80, both Navicore and Route 66 have series 3 symbian versions but both seem to be having issues with compatability for the Nokia N80, it seems there may be some bluetooth problems.
    1) Is there a firmware updated to cure this yet ?
    2) Are Nokia talking with the Route66 and Navicore people to sort this out ?
    I'm wondering now on whether I have grounds to return my Nokia N80 given these issues ???

    what firware do you have ?
    I would think it would be the other way round, they would talking to Nokia trying to get a fix.
    N96-1 + 8G SD~Software Version 30.033~Software Version Date 18-06-09~Type RM-247~P/C 0543713~T Mobile UK

  • N97, issues still unresolved after software update

    I was happy to see the latest software update from Nokia for N97 hoping it would have solved the issues but I was very disappointed experiencing the same problems that I was getting before and worst part was new problems have also
    been experienced.
    Old problem which is still not solved
    It is still impossible to get the phone working if it switches off by battery getting fully drained. The battery doesn't start
    charging even if you put the phone in charging for 24 hours. The charging light blinks but the phone doesnt charge.
    New problem after software update
    Even if the phone is put on charge for 24 hours, it doesnt get fully charged. Infact the battery indicator doesn't climb up after 2 points and after using the phone for a small time, it says battery discharged and phone switches off.
    I have always been stuck to Nokia phones since I've started using handphones but am having the worst experience with
    this N97. God knows when the Nokia people will wake up and provide a final solution to this.

    Try pulling the battery and leaving it out for 5 minutes.  Put back together and commence a recharge.  Se if that helps.
    Nokia N8 on O2-UK
    Firmware 022.014

  • Is the slow SATA HD issue still unresolved in latest Bootcamp?

    an earlier post by kkapoor indicated lack of support for SATA drives in Win XP, and indicated a fix to a now dead web site. Is the slow SATA still an issue? Will it impair running games in Windows mode( the only use I have for Windows)?

    I believe this issue was resolved by the Mac Pro SMC Firmware Update.

  • Palm Centro GSM Unlocked freezing issues still unresolved?

    Hi, I'm one of the many many (yes, we exist and we ARE MANY, even if Palm keeps ignoring us) unhappy Centro owners that purchased a smartphone that (ironically) doesn't work as a phone... I'm writing from Mexico and I bought a Palm Centro with Telcel.
    I don't think it's necessary to again describe the problem because it's been discussed a lot here and in other respected and popular Treo/PDA forums... just google "Centro freeze" and you'll see for yourself.
    I just wanted to know a couple of things:
    1.Is Palm ever going to adress this issue as an official bug and offer a ROM/Firmware update solution or are they cowardly going to turn they're backs on us?
    2. Has anyone suffering from this issue tried the custom ROM update offered by some guy at TreoCentral and did it work?
    3. Flashing and/or changing the ROM of my quasi-phone voids warranty?
    I hope someone can help us, the once satisfied and loyal Palm users now turned into desperate postin/ranting machines...
    Post relates to: Centro (Unlocked GSM)

    Since this is the offical forum of Palm, I and many other Centro users would like an offical answer on this, please.

  • My Billing Issued Still Unresolved

    Now we are going on two months of me not getting the credit that was promised to me. The last rep I spoke to told me it would be a couple of days and now we are going on a month. I also noticed my plan is now $10 higher than the plan I signed the contract for. How could I be going through so much just for internet and cable that I am barely home to watch. I have to divert time to solve these billing issues. Please fix this, I am not a hard guy to please but I do not plan on giving away money based on glitches.

    After trying for hours I think I found the problem. I saw that Geert is a Dutch name. I am Dutch as well so it had to do something with the language selection. I changed language to English by choosing United States as continent on the bottom left.
    It fixed to problem for me
    This is a bug @Adobe
    Please fix it.
    Thanks!

  • TS3297 I keep getting the error 306 cannot connect to the iTunes Network when downloading songs on iTunes. I've tried all the troubleshooting steps from the forums and my technical issues are still unresolved. I have Windows 7. Please help!!

    I keep getting the error 306 cannot connect to the iTunes Network when downloading songs on iTunes. I've tried all the troubleshooting steps from the forums and my technical issues are still unresolved. I have Windows 7. Please help!!

    iTunes Store loads partially or returns "Error 306" or "Error 10054"
    Proxies, parental control settings and software, security or filtering software, or a bad iTunes Store cache can cause this.
    To address proxies, Remove Internet Options proxy settings  ( http://support.apple.com/kb/TS1490 ) and connect to the Internet without a proxy.
    To reset iTunes Store cache:
    In iTunes, choose iTunes > Preferences (Mac) or Edit > Preferences (PC).
    Click the Advanced tab.
    Click the "Reset cache" button.
    Click OK and see if the issue is resolved.
    Adjust Parental Controls in iTunes:
    Open iTunes.
    Access iTunes preferences:
    On a Mac: From the iTunes menu, choose Preferences.
    On a Windows PC: From the Edit menu, choose Preferences.
    Click the Parental Controls tab.
    Remove restrictions on Parental Controls.
    For more information on parental controls or content filtering software, see iTunes 10.5 for Windows: May see performance issues and blank iTunes Store.
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • I've Downloaded twice ''Additional Contents'' but the issue is still unresolved  ( '' EXS 24 instrument ''steinway Piano.exs '' Audio file '' stw per v1 024.AIF '' not found)

    I've Downloaded twice ''Additional Contents'' but the issue is still unresolved  ( '' EXS 24 instrument ''steinway Piano.exs '' Audio file '' stw per v1 024.AIF '' not found)
    Please Help

    "Additional Contents" I don't even know what that is? What app is it for?

  • Nokia 701, Battery Back Up Issue, Bluetooth issue,...

    Hi
    I bought nokia 701 20 days back, I found 3 issues w ith my mobile.
    1. As i am transfering my files to other mobile or laptop through bluetooth the mobile says
    un able to transfer.Same issue is found while receiving files through bluetooth from other mobiles also.
    2.The mobile Battery absorbing so quickly with in 20 hrs, irrespective of using or un using.
    I had taken it two times Nokia store and kept in abservation and said that this mobile is like this.
    I was astoshined smart phones for nokia previously i had used do not act so.Nokia was not able to keep its word of stand by time with out any applications installed on it.
    3.While i am backing up my phone contacts its not backing up and say memory not set.I did not found any  option to found setting of memory for Back Up.
    Apart from the above issues.Over all Belle nokia 701 is excellent, if above three can be resolved no other mobile could not beat nokia 701.
    Suman.

    1.
    Yes there is a bluetooth problem. I can received the same file from my other phone but cannot with laptop.
    It works with phones.
    2.
    Battery backup is okay for me. Don't run too many apps and leave them in background. Close them by long pressing menu key and selecting X.
    3.
    For backup memory card is needed.
    As we go for software update or reinstall all data gets deleted. So it needs removable memory card.
    -------------------If this post helped you, click on accept as solution.------------------
    -----------------------------Appreciate by clicking on white star.----------------------------

  • IOS 4.3 still did not fix the bluetooth issue

    I am still unable to pair up my bluetooth stereo headphones with my iPhone 4. I originally had it paired up back when my iPhone 4 was running 4.0, but ever since iOS 4.2.1, I've been unable to pair up anything with my bluetooth. Does the Apple Corporation even look at these posts? Anybody else having bluetooth issues?

    Actually, I would be very surprised to find out that Apple does not read these forums. A smart company would monitor discussion about their products, especially on a sight they sponsor, to gain insight on how to improve their product and or customer service. However, you should always file your complaint through the proper channels. I have had a few minor glitches between my iPhone 4 and my Jawbone Icon but things seem significantly better...so far. It just angers me that Apple has not admitted to any kind of bluetooth connectivity problem. This experience has completely tainted any kind of positive experiences from my iPhone 3G. I'm very likely to try a Droid or Blackberry when I upgrade again.

  • N80 Bluetooth Fix Yet?

    Anybody have any news from Nokia about the long awaited fix for the N80 bluetooth problems?

    Patc, I'm with you, and understand your frustration. I'm sure that the tech boffins in Nokia are beavouring away trying to sort the problems out, but suspect that the vast majority of resources are allocated to new phone development not fixing existing phones.
    Sister bliss - You are quite right we should give Nokia every chance to sort it out, but they should at least let us know that they accept that there is a problem and are working on a fix, rather than the sloping shoulder syndrome we are all experiencing. If you have a look at some of the older threads here and on other GSM / 3G forums these issues are not days, but months old. This is not acceptable.
    In pure legal terms there is a strong case for legal action. I presume that you have heard of the Trade Descriptions Act and the Sale of Goods and Services Act. They both relate to goods being fit for purpose and being accuurately described. In the case of the N80 Blutooth does not work as per the official bluetooth standard specification and the battery life is not even close to the advertised figures. Of course this is not practical and fortunately the UK does not, yet, operate under the same litigious culture that has thrived in the US, so it is unlikley that any case would make it to court, but as patc pointed out it might encourage Nokia senior managment to reallocate resources to resolve problems with existing phones more quickly. I believe this was the point of patc comment.
    Rufao - have you checked this particular forum or done a google search for either "N80 GPS" or "N80 bluetooth", your eyes may be opened. Route 66 works on Symbian S60 v3, and it works on the N80. It is not useable on the N80 because the N80 is prone to disconnect from the GPS reciever every few minutes. This afflicts the Navicore software as well. It is a Nokia problem not a route 66 or any other 3rd party developer problem. In actual fact, due to the lack of apparent action from Nokia, it is our problem.
    I'm prepared to wait as long as I know that there is light at the end of the tunnel.
    ps Apologies for my spelling, but boiling blood (at Nokia) and writing forum posts whilst at work don't contribute to great grammar !!!!

  • Reading bluetooth GPS data from a Nokia phone

    I have a problem reading data from a MTK bluetooth GPS device from a Nokia phone (7610, Symbian S60).
    I wrote a midlet (my phone supports CLDC 1.0/MIDP 2.0) that create a thread to read data
    from the device (using RFCOMM protocol), the code is:
    package gpsreader.bluetooth;
    import javax.microedition.io.*;
    import java.io.*;
    public class BTrxtx implements Runnable {
    private String url = ""; // Connection string to the bluetooth device.
    private boolean canRead; // True if possible to read from device.
    private boolean canWrite; // True if possible to write to device.
    private String btstr = ""; // Last received string.
    private int strCounter;
    private int byteCounter;
    private StreamConnection conn = null;
    private InputStream inputstream = null;
    private OutputStream outputstream = null;
    private boolean newStr;
    private static final char[] EOL_BYTES = {'\015','\012'};
    public BTrxtx(String u) {
    url = u;
    canRead = false;
    canWrite = false;
    strCounter = 0;
    byteCounter = 0;
    newStr = false;
    Thread t = new Thread(this);
    t.start();
    private void openInput() {
    canRead = false;
    try {
    inputstream = conn.openInputStream();
    canRead = true;
    }catch(Exception e) {
    setBtstr("oin");
    System.out.println(e);
    private void openOutput() {
    canWrite = false;
    try {
    outputstream = conn.openOutputStream();
    canWrite = true;
    }catch(Exception e) {
    setBtstr("oout");
    System.out.println(e);
    private void openConn() {
    try {
    conn = (StreamConnection) Connector.open(url);
    openInput();
    openOutput();
    }catch(Exception e) {
    setBtstr("oconn");
    System.out.println("Failed to open connection: " + e);
    private void closeInput() {
    try {
    if(inputstream!=null) {
    inputstream.close();
    }catch(Exception e) {
    setBtstr("cin");
    System.out.println(e);
    private void closeOutput() {
    try {
    if(outputstream!=null) {
    outputstream.close();
    }catch(Exception e) {
    setBtstr("cout");
    System.out.println(e);
    private void closeConn() {
    try {
    closeInput();
    closeOutput();
    if(conn!=null) {
    conn.close();
    }catch(Exception e) {
    setBtstr("cconn");
    System.out.println(e);
    public void run() {
    openConn();
    try {
    Thread.sleep(200);
    }catch(Exception e) {
    try {
    int i = 0;
    char c;
    String s = "";
    // Start reading the data from the GPS
    while(canRead==true) {
    i = inputstream.read(); // read one byte at the time.
    if(i==-1) {
    closeConn();
    try {
    Thread.sleep(200);
    }catch(Exception e) {
    openConn();
    try {
    Thread.sleep(200);
    }catch(Exception e) {
    continue;
    byteCounter++;
    // Every sentence starts with a '$'
    if(i==36){
    if(s.length()>0) {
    strCounter++;
    setBtstr(s);
    s = "";
    c = (char) i;
    s += c;
    System.out.println("GPS return no data");
    setBtstr("BTend");
    }catch(Exception e){
    setBtstr("BTrun");
    System.out.println(e);
    private String byte2hex(byte b) {
    char[] alphaHex = {'0', '1', '2', '3',
    '4', '5', '6', '7',
    '8', '9', 'A', 'B',
    'C', 'D', 'E', 'F',
    int low = (int) b & 0x0f;
    int hi = (int) (b & 0xf0) >> 4;
    String res = String.valueOf(alphaHex[hi]) + String.valueOf(alphaHex[low]);
    return res;
    public boolean sendData(String data) {
    boolean res = false;
    try {
    if((canWrite==true) && (conn!=null) && (outputstream!=null) && (data!=null)){
    StringBuffer rec = new StringBuffer(256);
    // Calculate checksum
    int index = data.length();
    byte checksum = 0;
    while(--index>=0) {
    checksum ^= (byte) data.charAt(index);
    rec.setLength(0);
    rec.append('$');
    rec.append(data);
    rec.append('*');
    rec.append(byte2hex(checksum));
    System.out.println(">"+rec.toString());
    rec.append(EOL_BYTES);
    outputstream.write(rec.toString().getBytes());
    }catch(Exception e) {
    System.out.println(e);
    return res;
    public int getStrCounter() {
    return strCounter;
    public int getByteCounter() {
    return byteCounter;
    public String getBtstr() {
    newStr = false;
    return btstr;
    private void setBtstr(String s) {
    newStr = true;
    btstr = s;
    public boolean receivedData() {
    return newStr;
    The problem is on method "run" at line:
         i = inputstream.read(); // read one byte at the time.
    after reading some data (usually one NMEA string) read method returns -1,
    and even if I try to close the connection and re-open it, after some other data is read,
    the midlet is terminated by the phone with an error (something like "jes-13c-java-comms@1441adE32USER-CBase 40").
    The GPS receiver is working, since from my PC I am able to connect with a bluetooth USB dongle and read outputs using RFCOMM.
    Thx for any suggestions,
    LB.

    Work around.
    I can not say I solved it, but I managed to get a work around:
    I read in another post that there are some problems in thread handling on Nokia phones, so I rewrote the class so that it runs on the main thread and now it seems to work (I can not update the screen while reading from the device, but this isn't a big issue for me).
    Just in case anyone is interested here is the final code:
    import javax.microedition.io.*;
    import java.io.*;
    public class BTBrxtx {
    private String url = ""; // Connection string to the bluetooth device.
    private boolean canRead; // True if possible to read from device.
    private String btstr = ""; // Last received string.
    private int strCounter;
    private int byteCounter;
    private StreamConnection conn = null;
    private InputStream inputstream = null;
    private boolean newStr;
    private String s = "";
    private static final char[] EOL_BYTES = {'\015','\012'};
    public BTBrxtx(String u) {
    url = u;
    canRead = false;
    canWrite = false;
    strCounter = 0;
    byteCounter = 0;
    newStr = false;
    openConn();
    try {
    Thread.sleep(200);
    }catch(Exception e) {
    private void openInput() {
    canRead = false;
    try {
    inputstream = conn.openInputStream();
    canRead = true;
    }catch(Exception e) {
    setBtstr("oin");
    System.out.println(e);
    private void openConn() {
    try {
    conn = (StreamConnection) Connector.open(url);
    openInput();
    }catch(Exception e) {
    setBtstr("oconn");
    System.out.println("Failed to open connection: " + e);
    private void closeInput() {
    try {
    if(inputstream!=null) {
    inputstream.close();
    }catch(Exception e) {
    setBtstr("cin");
    System.out.println(e);
    private void closeConn() {
    try {
    closeInput();
    if(conn!=null) {
    conn.close();
    }catch(Exception e) {
    setBtstr("cconn");
    System.out.println(e);
    public void readInput() {
    try {
    int i = 0;
    char c;
    // Start reading the data from the GPS
    while(canRead==true) {
    i = inputstream.read(); // read one byte at the time.
    if(i==-1) {
    closeConn();
    try {
    Thread.sleep(200);
    }catch(Exception e) {
    openConn();
    try {
    Thread.sleep(200);
    }catch(Exception e) {
    continue;
    byteCounter++;
    // Every sentence starts with a '$'
    if(i==36){
    if(s.length()>0) {
    strCounter++;
    setBtstr(s);
    s = "";
    c = (char) i;
    s += c;
    return;
    c = (char) i;
    s += c;
    System.out.println("GPS return no data");
    setBtstr("BTend");
    }catch(Exception e){
    setBtstr("BTrun");
    System.out.println(e);
    private String byte2hex(byte b) {
    char[] alphaHex = {'0', '1', '2', '3',
    '4', '5', '6', '7',
    '8', '9', 'A', 'B',
    'C', 'D', 'E', 'F',
    int low = (int) b & 0x0f;
    int hi = (int) (b & 0xf0) >> 4;
    String res = String.valueOf(alphaHex[hi]) + String.valueOf(alphaHex[low]);
    return res;
    public int getStrCounter() {
    return strCounter;
    public int getByteCounter() {
    return byteCounter;
    public String getBtstr() {
    newStr = false;
    return btstr;
    private void setBtstr(String s) {
    newStr = true;
    btstr = s;
    public boolean receivedData() {
    return newStr;
    Now I call method readInput in the main thread and than use getBtstr to retrieve data.
    I'm still interested to know if someone had similar problems and how they have been solved.
    Thx

  • Bluetooth issue in ios 7.1

    I am facing the Bluetooth issue in ios 7.1 iphone.In ios 7.0 it works fine without any problem.I am using the EA framework for reading/writing the data in my application.Still I have not got any correct solution for this scenario. I am having a doubt that this issue is happening as because of EA framework which I am using it or do i need to change any settings.Could someone tell me the solution for this problem?

    1.I am using an external Bluetooth kit by which I will send the command through my iphone application.I will communicate with the external Kit through a command that writes and reads the data using External Accessory framework.In lower version except IOS 7.1 i was able to communicate properly without any issues.In EA framework implementing a delegate method I could able to write/read a data.
    2) Right now I am facing an issue only in ios 7.1 where I was not able to read any data from the external Bluetooth Kit.I have researched regarding this issue in all the sites I got to know some information that because of EA framework issue in ios 7.1 where I am able to communicate.But still I have a confusion that its happening because of EA framework or any other ios issues.

  • I need help with BlackBerry 8820's bluetooth issue

    Hi!
    Please accept my appology of my poor English.
    My 8820 has a bluetooth issue with Bluedio E9+ headset. It must be note that the headset works well with another phone (not BlackBerry). My BlackBerry can't actively connects to bluetooth headset by the method 'Menu' key > 'Connect' option, but still able to receives connection request from the headset and pairs with the headset when i choose Yes. At this point I can use bluetooth function for data transfering, Voice Dialing and music playback (i.e. mp3 files). But each time I try a mp4 file with default video player in Media folder, its audio will never work with the bluetooth function, and the phone's speakers is automatically enabled. I try the menu when the video was playing, but there are only Activate Handset and Active Speakerphone options. Then I was converted the file with BlackBerry Video Converter Pro; I remove and reinsert the battery; I wipe the phone and install new ROM,... But none of them work.
    Please help!
    TheME® ToanDuong™
    Copyright © 1986-2015.
    Mama MiraTech, Co. Ltd.
    All rights reserved.

    This was an unintended result of an intentional change to fix how Premiere Pro handles spanned MXF clips. To learn a bit more, please consult this thread: http://forums.adobe.com/thread/1358012?tstart=0
    Look for the workaround recommended by PPRO developer Wil Renczes.

  • Satellite U500 - Bluetooth issues BT Monitor vs. Bt Stack

    Hello everyone,
    My wife's machine is a Satellite U500-10L PSU5EE-002003AR, now with Windows 7 Professional 64-bit (originally with Vista pre-installed, later with W7Pro 32-bit.)
    Now, I've always had various issues with Bluetooth on this machine, and it's the only machine I've ever had Bluetooth issues with, mostly having to do with internet connectivity via mobile phones.
    Most usually, I connect to the internet using Sony Ericsson PC Suite and a Bluetooth-controlled Sony Ericsson mobile phone (currently and Elm, and occasionally a Hazel or a C702.) This setup has always worked flawlessly on every other machine I've used, such as my Getac B300, the old HP Compaq 6710b given to me by my previous employer for a couple of years, and even my untrustworthy old Thinkpad T42 (now deceased), and my mother's ancient Macbook. With those machines, I've never had any trouble connecting to any of the phones or to the internet, with no drops, connection issues or any other issues.
    Not so with this U500. I'm writing this while connected through PC Suite, with Bluetooth Monitor 4 as the hardware controller. The connection is intermittent at best, usually unreliable, and sometimes downright impossible. Sometimes it works flawlessly for days on end, and sometimes it just refuses to work. Generally, though, I get a connection more often than not, but the issue is annoying nevertheless.
    Now, I tried a different approach: I uninstalled Bluetooth Monitor and SE PC Suite, installed the Toshiba Bluetooth Stack and tried to connect to the internet directly through the BT Stack. I paired the Elm to the U500 successfully from the BT Stack control panel and managed to dial the connection, so far so good. But I had no internet access whatsoever. Now, the phone shows that it's actually connected, and so does the BT Stack control panel and the Windows 7 connectivity monitor in the system tray, but there's no actual access to the internet (I only get the little yellow triangle with the +no internet access+ message, but the phone is dialed in.)
    So, I tried reinstalling PC Suite (with BT Stack present), and things got even worse: now the BT connection itself between PC Suite and the phone is only sporadic and intermittent, but sometimes it just works well enough to actually get a connection (albeit an unreliable one.)
    So now I've uninstalled the BT Stack, reinstalled BT Monitor and went back to using PC Suite for dialing, and the same issues I mentioned earlier still persist.
    Now, my two questions are these: a. why didn't I get any internet access with BT Stack, even though the phone was actually dialed in to the connection? and b. assuming the internet access issue is resolved, would I possibly get a more reliable connection (i.e. one that doesn't suddenly decide to drop every so often) with BT Stack instead of the PC Suite/BT Monitor setup?
    Thanks in advance.

    Just an update: I've found that as long as there is a direct line of sight between the phone and the U500, there would be no issues. The Bluetooth connectivity issue only starts to appear whenever there's something - anything - in the way between the two.
    Let me clarify. Now I'm sitting at my desk, with the U500 right in front of me, while the mobile phone is hanging from a nail in the wall above me and to the left. Now that there's a direct line of sight between the phone and the U500, I have no issues at all.
    Now, let's say I take the U500 off the desk, put in on my lap, and turn my back to the phone. In this case, my head and torso would be in the way of a direct line of sight between the two, and the stability of the connection begins to deteriorate, and it becomes very unreliable - sometimes even dropping the Bluetooth connection altogether (Sony Ericsson PC Suites goes all gray on me!)
    Here's another example: there's a printer sitting on the desk right to my left. Now, if I stack up a bunch of magazines on top of the printer, high enough to be within the line of sight, I will start having issues!
    So, I'm pretty sure it's a Bluetooth connectivity issue, and has nothing to do with the internet connection or firewall. It's clearly a hardware quality issue.
    By contrast, I never experienced any such issue with my B300, the HP Compaq 6710b I had earlier, or even with my now-deceased ThinkPad T42. Hell, I might as well have gone into a different room entirely and still maintained a Bluetooth connection with those three machines! With the Toshiba, though, as soon as I carry the thing out the door - which is about four feet from the phone - the connection is gone!

Maybe you are looking for

  • Magic Mouse still not connecting on Bootcamp 3.1 with Windows 7

    I had windows 7 ultimate x64 running on Bootcamp the last few months and was thrilled to see that the last update would work with my shiny new magic mouse. To my disappointment it didn't. I tried reinstalling the update (x64 version of it) a few time

  • Transfer from older camcorder to iMac - cable needed !

    I have an older camcorder using HI8 tapes. They are recorded digitally. The camcorder only have red/white/yellow out which I use when watching on ordinary TV. How can I transfer to my iMac / eMac ? I believe that iMovie can handle the digital info co

  • Organizing photos in Aperture?????

    I am trying to organize the projects and albums that are located on the left hand side of the screen when using Aperture.  You can arrange the projects and albums by name, manual, or kind when you use the preferences drop down menu located below the

  • Cds wont burn onto itunes?

    when i put a cd in to put it onto itunes a bar comes up that says accessing gracenote cddb and it says proccessing and when it finishes the artist column in the library highlights and then nothing happens?

  • Message no -4f113

    hello system is showing me an error message no 4f113 that all part 1 entries have been cancelled for excise invoice, when i post the excise through j1iex .though i have done  part 1 entry and it is  showing in display mode. how can i see detail of th