N80 Camera settings

Howdy folks
I've had my N80 for a week now, pretty good phone but i do need a lil help on one issue, the flash on the camera, is there a way to turn the flash OFF and save that setting, because every time i change it , and re-open the camera again it goes right back to automatic.
Moreover there's this odd flash notice when taking a picture even when the flash has been set to OFF (as noted in the manual)
so my question is two fold, is there a way to save the flash OFF setting and is there a way to disable that annoying flash notification
any help you can offer would be appriciated.
sides from that, no major problems with the phone, already played with wi-fi , had msn and gtalk going on there, just waiting for skype now
thanks y'all

Check this thread out that was started in the last day or so...
/discussions/board/message?board.id=smartphones&message.id=16004
I'm afraid the answer looks like, "No, you cannot switch the flash off permanently".
Looks like a publisher might do well with a third party camera application that has these functions built in.
S.
History: Motorola MR30, Nokia: 7110, 7650, N70, N80, N82, X6 (32GB), Samsung Galaxy SII
Current: Samsung Galaxy Note3 Black

Similar Messages

Nokia N8 camera settings is not saved

Hey.
I found out that all the camera settings is not saved. For exampel i always want the grid displayed but then i have to turn it on manuelly every time. Same goes for the timer, id like it to be on 2sec so the picture not is taken as you push the button (shaky etc).
Probably more camera settings that not saved havent checked it all.
Solved!
Go to Solution.

OK first of all look at this, 333 people viewed your original post and followed by 171, 144 and the last one that you responded 55 people viewed and yet your the only one with this problem lol
Here is the thing, I'm sure nokia had a damn good reason for not letting the grid option be set as default, and if you can't press two buttons to get to it, well that's your own fault for being lazy lol all these people viewed your post and not even one decided to say something, that's probably because no one really have a problem with what your complaining about and I don't count that new user since all her said was "No reply from Nokia on this???" hehe
anyways if nokia makes any changes in their camera setting and give us more options, well GREAT, but right now most people are happy with their N8 camera and its setting. Their are much more important issues regarding Nokia N8 and you picked the least important one lol way to go.
Don't forget that you can't compare the N8 with a digital camera, just because you can do things differently on a digital camera doesn't mean you suppose to do it on a camera phone. In my opinion the N8's setting is damn good, could get better and if nokia does something about it Great but I can do what I wanna do with the setting. So please try not to bring up any little problem you thing it has or you thing needs to be changed because I really don't think what you calling a problem is a problem
Nokia N80
Nokia N82
Nokia N97
Nokia N8 Dark Gray- RM-596

N73 "advanced" camera settings ?

I have recently got an N73 for myself to replace a **bleep**py V3. Quite a complex phone to get around - my last Nokia was a 6310i - but the one area that disappoints in the camera software.
I notice that on the N80, which is basically the same camera and Symbian OS, there are a range of advanced camera settings which do not exist on the N73. Specifically, the ones that interest me are "sharpness" (which should be set to none / minimal for any descent chance of a good photograph) and the JPEG quality setting. Saturation would be nice too, but hey.
It feels like they are set to "high" and "low" respectively - which is great for a consumer's "gosh! wow!" type thing but speaking as a keen photographer it makes the N73's camera pretty useless except for taking pictures of car accidents and documents.

Am I sure about documents in what sense ? The N80 manual clearly mentions a sharpness setting and I threw the JPEG quality / compression parameter in as an example of a good thing to be able to change. Perhaps you can expand on your question ?

How to include camera settings on actual image during export

Is there a way to include camera settings directly onto the image upon export of image(s) in Aperture Program?

Not without a plug-in. Aperture does not allow compositing.
The plug-in BorderFX can likely allow you to do what you want, and more. Recommended.
—Kirby.

In camera settings 'Save to Media Card' is ghosted..

I have the media card inside the phone, it is formatted and recognized but when I go to camera settings I do not have the ability to "Save Pictures to Media Card" - the slider on/off is there but I can not move it to turn it on.
Does anyone know how to set this?
Solved!
Go to Solution.

Try removing the SD card and reinserting, and at the same time, remove the battery and reinsert.
Then, check that setting again.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

T530 Lenovo Integrated Camera not working, Lenovo Camera Settings does not Display

Hello, I have a new T530 with Windows 8 OS. I am having trouble using the integrated camera. It functions neither in the Windows camera app nor in Skype. In both cases I get a picture with a gray background and a camera with a line through it. In Device manager, the camera does appear, is enabled, and the drivers are up to date.
After looking through other threads, I tried checking whether the camera was plugged in and indeed it was. When using Skype and I set the camera to on (Skype did detect the camera), I still got the gray no camera image, but the green light on the camera itself turned on.
I also tried using Fn+F6 to check settings. Lenovo settings opens, but the when I click the camera settings Icon, the screen loads a blank page that says "Camera" in the top right and has a back button (left pointing arrow) in the top left hand corner. The back button does not seem to work and I must change the window to something else in order to exit/close settings.
I tried manually installing both camera drivers and "power management" ("energy management"?) drivers. Neither of this solved either of these issues.
Please help me to resolve this problem. Thank you.

Hi, euterpenc
I would make sure that the BIOS is up to date in the system. The current BIOS for your system is 2.07 and can be found here. Also, I would ensure that the chipset drivers are up to date, and those can be found here.
Hope it helps, and let me know how it goes
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

How do I include camera settings info when exporting photos?

Hello! I am taking a photography class, and the instructor wants the camera settings (i.e shutter speed, aperture, ISO, lens, etc) to be included with the photos I send for my assignments. I see these setting when I click "info" in iPhoto, but do not know how to get those settings to export along with the photos so that he can see them. Who can help?

I believe the OP is trying to export those settings
I think so too, but even without any special export settings will the EXIF tags with the camera settings be included with any JPEG version. It is not necessary to include title and location. The JPEG will include the EXIF., as can be seen in Preview.
I thought s/he might want to send a pDF with the written values as well, just in case the instructor could not read the EXIF.

RAW Native Camera Settings for Nikon - do they convert?

Question on RAW processing in Lightroom. Can Lightroom show ALL of the the in-camera settings (WB, saturation, etc.) selected when the shot was taken? I prefer not to have to re-cook the RAW photos from scratch on every picture. Nikon NX2 provides this option (i.e. the RAW and JPEG can look identical as starting points on your screen) which I find helpful versus dealing with uncooked RAW images to start with each time. I am considering Lightroom for lots of other good reasons but this is a threshold issue for me due to time, etc.
Would love to hear anyone's experience on this. I use a Nikon D80.
Thanks much.
Gary

Robert,
Specific camera settings,etc, are in fact stored in Nikon Nefs and can be read by NX2--or changed, if one wishes in NX2, but nowhere else, as has been stated.
Eric,
Presets, or profiles, may come close in some instances to reasonably good starting points for NEFs in LR2, so if that is all you need or use NX2 for, then your advice is reasonable.
However, at this point in time, NX2 has some distinct advantages, most notably much more advanced and faster local corrections tools than LR2 and soft proofing, to name two.
However, LR2 editing is integrated with a catalog database, and NX2 is browser based, and that may make LR2 worth the tradeoff for some users. Both, of course, offer non destructive editing.
Each has it strengths and weaknesses, so I use both to take advantage of the unique tools each offers.

What camera resolution mode is used by the Flash Player camera settings manager

What camera resolution is used by the Flash Player camera settings manager? I am referring to the camera settings that you have to pull up by right-clicking on a Flash Player swf that is running, and from the right-click menu you hit settings...select the camera tab...and then you can hit the little camera icon and will show you the live video feed from the camera.
In order for the live feed to be displayed, Flash Player requests a camera resolution mode to the driver. What mode is being requested?
For example, could it be 160x120 @ 30fps?
Or is it 176x144 @ 30fps?
http://www.macromedia.com/support/documentation/en/flashplayer/help/help04.html#117113

I have the same cam as you (it's apretty darn good cam IMHO).
I don't ever see any resolution request when I click the icon.
My cam initializes at 1920X1080, per the logitech specs. The box in the settings is 4:3, but the cam is running at 16:9, in apps like Skype, or FaceTime (Mac).
It shows the same setup screen in WIn XP, Vista, Win 7 and Win 8, which ALL share the same cam on my setup.
Being as the cam feed in the setup is 4:3, I'd have to say the resolution is 160:120 as opposed to 176:144 which would be a 5.3:3 or 16:9.

Advice on Nikon D200 Camera Settings

I have a Nikon D200 and I was wondering what camera settings would be more beneficial for me with working in Lightroom with RAW (DNG) files? The settings I am referring to are: Sharpening, Tone Compensation, Saturation, etc. Is it better to adjust these in the camera or in the post processing of the images in Lightroom.
Also, a DNG question: I will be converting all of my NEF files to DNG, should I just leave RAW compression off in the camera or turn it on???
Thank you in advance.

So, in essence, it is the generated JPG from the RAW file that looks like crap when the tone compensation, sharpening, saturation, etc are all set to none in the D200??? I notice a big difference with the thumbnail view, I wasn't sure if it effected the actual RAW file. It seems to me though that I have noticed from time to time that some of my images do not need sharpening (since my camera settings are on 2+ sharpening), however, when I increase the sharpening in Lightroom I begin to see the halo effect due to the increase sharpening. With that being said, I set my camera sharpening back to normal and I will have to try it and see what I get (I have not shot the camera since the change).

Camera settings for making youtube videos

I have a Canon 60D and CS4 master collection with Premiere Pro and Encore. What settings should I shoot video at in order to get the best youtube output? My choices are 1920x1080-30; 1920x1080-24; 1280x720-60; 640x480-60; crop-640-60

Thanks Bill, that's a most honest answer. I also found this tv segment to help in the camera settings. http://tv.adobe.com/watch/shooting-and-editing-hdslr-video-using-adobe-tools/-setting-up-t he-camera-correctly-for-dslr-video/ This is most exciting challenge and a healthy switch from my traditional photo skills.
Bob.

Camera settings when using Aperture

In this thread:
https://discussions.apple.com/message/24520115#24520115
I give the advice that it is best to only set ISO, aperture and shutter speed on the camera when shooting RAW. Leave the rest at the camera defaults.
Is that good advice?
While YMMV based on the camera model, in general it seems that there is no guarantee that Aperture can understand or honor any other camera settings besides the Big Three. Note I include white balance as one to leave alone!
Does Apple provide any advice on this?

I suggest the following as a conceptual framework.
Cameras today do two things that are best thought of as distinct families of operatons. They _record data_, and they _make pictures_.
I use my camera as a data recorder. I then upload the data to my computer, and use Aperture (and other software programs) to make pictures from the data I recorded. The camera saves this data in RAW files.
As an almost universally applicable rule, computers do a better job making pictures than cameras do. (Personally, I would like to see this distinction made real: I don't want to pay for camera bodies that do any more computing than data recording and display requires. How many Sony cameras -- just to pick on the brand I use -- have ever been used to show slideshows on Bravia TVs?)
The settings that are important for data recording are (as you listed) those for _exposure_: duration (stupidly known as "shutter speed"), aperture (I suggest "hole size"), and (as I understand it) signal amplification (stupidly known as ISO). Everything else (including White Balance) are, literally, post-processing operations. ("Post-processing" is, afaik, a short form of "Post-exposure processing".) The other exposure settings are important, but not usually thought of as settings: focal length, focus distance, location and direction of camera.
The above is for RAW data recording. JPG is not a light data format, it is an image format. As such, JPG requires post-processing. For me, JPG is a quick-and-dirty, proofing format. It has its uses. I almost never use it.
Keith Barkley wrote:
Does Apple provide any advice on this?
Not that I know of. Apple prefers to flood valleys and let users figure out where to build their vacation homes and how to not crash their boats on submerged rocks. They have mastered the art of presenting appealing vacation-lands. Part of that is _not_ listing rules for use beyond the most general, and certainly not letting users know how cold it gets at night or that scorpions can nest in your slippers. Specifically, they remove any odor of engineering from every product they sell. The advice you are asking for is good, useful, and ... (broadly) engineering. Apple prefers (imho) to have its users provide that to those who seek it, so that those who don't seek it won't be discouraged from buying the vacation package .
--Kirby.

Camera Settings and Printing -off topic

Hi Everyone;
My teenage cousin is going on a trip to Europe for a few weeks and she will be taking alot of digital pictures with her Canon point & shoot camera ( 5 MP SD30), but will not be able to unload her images from the SD card. She already has Three Cards totaling 1.5 GBs and does not want to buy more.
So in order to increase the number images the card will hold, do you recommend lowering the resolution OR lowering the image quality by increasing the JPEG compression in the camera settings, for the purposes of printing ? ( obviously not all her images, but she may want to have some for her school yearbook, friends etc ).
This is a question I have asked myself with my own digital cameras, over the years, if i have to shoot JPEG i usually have the settings to MAX resolution and Lowest compression, in case i want to print some.
Also what would you recommend as the lowest resolution setting (in general, with any camera) if you want to print the following sizes?
4 X 6
5 X 7
8 X 10 or US Letter
Thanks in advance, and i realize this is a little off topic.
Robert
Powermac G5 Dual 2.7Ghz, 4GB, X800, WD "Raptor" 74 GB 10K boot, 3.5 TB FW 800 Mac OS X (10.4.5) My first Computer was an Apple IIc !!

You could purchase an iPod along with the iPod Photo Connector to download the images for storage.
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/70203/wo/oG40TPj AzNzm2xaoa3A25wLSBVg/2.SLID?mco=55EFC253&nplm=M9861G%2FA
Epson also makes two such a devices.
http://www.epson.com/cgi-bin/Store/consumer/consDetail.jsp?BV_UseBVCookie=yes&oi d=49164278
http://www.epson.com/cgi-bin/Store/consumer/consDetail.jsp?BV_UseBVCookie=yes&oi d=61555441
PowerMac G5 Quad 2.5Ghz Mac OS X (10.4.5) 4.5GB RAM, Nvidia 7800 GT, 600GB RAID

Aperture not showing camera settings applied on RAW images

I have the Canon EOS 1D Mark II N. When in-camera settings like contrast, sharpening, etc are applied in camera, then those images are loaded directly from card reader into Aperture the in-camera changes are not applied to the Raw images. The Jpeg images DO show the in-camera settings contrast/sharpening etc being applied. I can take the memory card and load those same images into DPP Digital Photo Professional and the settings applied in camera do show on the BOTH Raw and Jpeg files.
In Aperture when I look at the thumbnails of the RAWs and JPEGs side by side. It is obvious which ones are the jpegs just by the contrast added in camera.
I can Also take the images within Aperture-export masters to desktop, then open them in DPP and the contrast/sharpening shows on the raws and jpegs the same in DPP.. It seems to be just Aperture..
Is this Normal? That Aperture does not read the in-camera changes on the Raw files? On the Metadata EXIF Expanded, It does read the exposure Bias, shutter speed etc correctly on the Raws, just not the Contrast or sharpening changes.

Hi Kathy,
This is expected. Settings you make in the camera, for things like color space, sharpening, white balance, etc. don't really apply to RAW images. This is the way the camera and RAW software are designed -- the RAW is really untouched, and this information is tagged along as "meta information." No actual transformation on the image is performed.
You take the RAW image into a RAW converter (Aperture's a good one and make the changes you want. In some cases (White Balance) the tagged info is used, but in others (sharpening, color space) it's not. Aperture uses the widest possible color space (it's wider than ProPhoto RGB from what I've been told, though I haven't used my handy gamut checker to verify
So this contrasts with JPEGs. JPEG is a "final" format -- so the settings you have configured in your camera are actually used in the creation of the JPEG. It is sharpened, color balanced based on your settings, fit into a color space (sRGB, Adobe RGB, etc.) compressed, and written as a JPEG. You can't take these things "back" once that has been done.
Aperture actually makes working with both types of images so similar that it's difficult to really notice the differences. If you work with a more labor-intensive workflow like Adobe Camera RAW, you'll notice all the extra steps you must employ to get from RAW to JPEG.

Camera settings in Nokia 5610 no availables.

Hi.
I've a 5610 RM-242 sw 10.0 and the following camera settings aren't available (They appear in the settings menu but are disabled):
* Night mode.
* Image sequence.
* White balance.
How can I enable them?
Thanks in advance.
Solved!
Go to Solution.

They will only work if flash is turned off.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

N80 Camera settings

Similar Messages

Maybe you are looking for