N80 dies in the middle of Software update

I just started the process of software update.
After it identified the phone, and downloaded the large 70 something MB of update, it started the actual update of the phone... when I got an error that the phone can not be updated. I tried a few time...nothing.
the screen that was blank...styed blank.... and now I am unable to restart the phone...
Any ideas.
My phone has the 4.0 firmware installed.
and I think it is a HongKong variant.

http://www.nokia.co.uk/nokia/0,8764,95600,00.html#15
The nokia FAQ for europe states the following:
15. Will the warranty be void if I update my phone software using Nokia Software Updater?
No, it will not.
and
38. My phone "died" during an update, what should I do?
Take the phone to your nearest Nokia service center. If the phone is within its warranty period, Nokia will repair the phone under the usual warranty terms and conditions. If the phone is not within its warranty period, Nokia is not liable for any loss as defined within the End-User Software Agreement.
I do not know if this is the same for USA, but it would be crazy if it isn't. I think it's really weird a phone bought in another country cannot be repaired it the USA..after all, it's still a nokia. So they have to give you the service for it.
btw: I've flashed my phone to death too last friday :'(.
She's on her way to get repaired now (takes about 3 weeks)...they couldn't fix it directly at the NSC.Message Edited by distel on 05-Nov-2006
03:34 PM

Similar Messages

  • My macbook air is hung up in the middle of software update.

    My Macbook Air is hung up in the middle of software update.  Can not control my computer at all.  Totally stuck.  Sos. Sos. Sos.  This is a brand new Macbook Air just purchased less than a month ago.

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.

  • HT4623 iphone 4 stuck in the middle of software update when i typed in the wrong wifi sign up name

    dont know if an iphone 4 or 4S
    Downloading new software update (ios) but is now stuck in joining a wifi (i put in wrong name?)  i dont have wifi.
    how do i turn off, reset, so i can use phone

    Hey katherinefromok,
    Thanks for the question. You can simply restart your iPhone to start over the setup assistant:
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    Thanks,
    Matt M.

  • My macbook pro keeps booting up, then after a few seconds, goes back to the sign in page. This happened after I was doing software updates and my computer restarted in the middle of an update. Help! Thanks.

    My macbook pro keeps booting up, then after a few seconds, goes back to the sign in page. This happened after I was doing software updates and my computer restarted in the middle of an update. Help! Thanks.

    Start up in Safe Mode.
    http://support.apple.com/kb/ph14204
    Repair Disk    Section: "Try Disk Utility"
    http://support.apple.com/en-us/HT203176

  • In the middle of an update, it call closed. Itunes keeps saying that it's not installed, even though ive tried reinstalling multiple times. All my iphone is doing it showing the ituns symbol and a charger. How can I fix this???

    In the middle of an update, it call closed. Itunes keeps saying that it's not installed, even though ive tried reinstalling multiple times. All my iphone is doing it showing the ituns symbol and a charger. How can I fix this???

    Hi lepyykko,
    If I understand your question, you are trying to update your iPhone, but you are seeing an error message that iTunes for Windows is not installed, is that right?  The first step is to get iTunes successfully installed on your computer.  Then backup the iPhone before updating the iOS software.
    Are you seeing any error messages when you try to install iTunes for Windows?  
    If you can't install or update iTunes for Windows - Apple Support
    https://support.apple.com/en-us/HT201668
    Are you able to update your iPhone wirelessly?
    Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
    https://support.apple.com/en-us/HT204204
    Before you update
    Back up your device to iCloud.
    Update your device wirelessly
    The easiest way to update your device is wirelessly, also called “over the air.” Here’s how:
    Plug in your device to a power source.
    Tap Settings > General > Software Update.
    Tap Download and Install. Updates might download automatically while your device is connected to Wi-Fi and a power source.
    Tap Install, or tap Later to install the update later. If you use a passcode, you'll need to enter it before installing the update.
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    https://support.apple.com/en-us/HT201263
    I hope this information helps ....
    - Judy

  • And need the new iTunes 11.1 to be able to use my iPhone on iTunes but I need the new mac software update OXS 10.6.8, but my mac doesn't need or have an update what should I do! I'm upset :'(

    and need the new iTunes 11.1 to be able to use my iPhone on iTunes but I need the new mac software update OXS 10.6.8, but my mac doesn't need or have an update what should I do! I'm upset :'(

    The requirements for iTunes:
    Macintosh System Requirements
    Mac computer with an Intel Core processor
    OS X version 10.6.8 or later
    400MB of available disk space
    Broadband Internet connection to use the iTunes Store
    Your Mac must be able to run OSX 10.6.8. If you can run that OSX then you can run iTunes 11.1.
    Which Mac do you have?
    MJ

  • HT4623 My iPad will not update to 5 at all. I don't even have the option of software update in settings. I've tried to update over iTunes and it doest work there either.

    My iPad will not update to 5 at all. I don't even have the option of software update in settings. I've tried to update over iTunes and it doest work there either.

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • I cant seem to download and install the latest iphone software update. I have tried since the release and have been unsuccessful on more than 7 occasions and lost all the data on the process. Anyone have that problem an how do I fix this problem?

    I cant seem to download and install the latest iphone software update. I have tried since the release and have been unsuccessful on more than 7 occasions and lost all the data on the process. Anyone have that problem an how do I fix this problem?

    Hi
    Thanks but I have tried doing the above - when I said 7 times I was modest, its more like 15 times.
    And I am referring to the 5.1 software update. I dont have wifi so I guess I will have to try that seeing that my husband also has the same problem - he has also tried downloading several times. It always times out en says that the connection is lost but yet there are always an internet connection and a decent signal once it stopped. Think it said error 32052 or something!
    I am disappointed because the update includes inprovement on the battery life - did you guys notice any difference?

  • I was in the middle of an update and i put the phine on charge, now i have to restore it and itunes isn't letting me

    i was in the middle of an update and i put the phine on charge, now i have to restore it and itunes isn't letting me
    please help!!!!

    If this has happened more than once the problem is likely on your PC.
    See here: http://www.apple.com/support/iphone/assistant/itunes/

  • Hi, my iPad dies in the middle of a purchase for a game add on, when I charged the iPad and reloaded the game a box is on the screen that says " cannot complete your purchase" I can't slope this box, and cat play the game while it is there, I have tried r

    Hi, my iPad dies in the middle of a purchase for a game add on, when I charged the iPad and reloaded the game a box is on the screen that says " cannot complete your purchase" I can't slope this box, and cat play the game while it is there, I have tried removing the game several times and reinstalling but the box still appears, I even tried installing the game on a different apple I'd, and still the box is there, do you k ow how to fix this?

    Hi Bev076,
    I would try these ideas first:
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    If that doesn't resolve the situation, I would suggest reporting it:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/ht1933
    Take care,
    - Ari

  • HT4623 in settings and then general i do not have the option of software update...? How do I know if I am on IOS6 I also seem to be having trouble trying to use icloud i think this is because my apple id is not in the form of an email address...? can anyo

    in settings and then general i do not have the option of software update...? How do I know if I am on IOS6 I also seem to be having trouble trying to use icloud i think this is because my apple id is not in the form of an email address...? can anyone help

    stell80 wrote:
    in settings and then general i do not have the option of software update...?
    That is only present if you have already updated to iOS 5 or later.  If you're on iOS 4 you can only update while connected to your computer's iTunes.
    stell80 wrote:
    How do I know if I am on IOS6
    Settings/ General/ About
    stell80 wrote:
    I also seem to be having trouble trying to use icloud i think this is because my apple id is not in the form of an email address...? can anyone help
    You can't access iCloud from your iPhone unless you're on iOS 5 or later.  Otherwise, refer to this article:
    http://support.apple.com/kb/HT4436

  • HT4623 MyiPhone 3GS on setting general does not have the place for software update adn I need to update to iOS5.1

    My iphone 3GS does not have in General the place for software update and for some my apps it request that I do iOS5.1 but I cannot do it tell me how

    The OTA update capability was not introduced until iOS 5. You will need to connect the device to the computer and iTunes and update it as you did in the past.Once you have updated, you will have the ability to do OTA updates in the future.

  • I installed the Epson Printer Software Update 2.15 and now I get a rastertoespll crash whenever I try to print

    I installed the Epson Printer Software Update that appeared in 'Software Update"' this morning and since then I get an error :
    Process:    
    rastertoescpII [47217]
    Path:       
    /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS/ rastertoescpII
    Identifier: 
    rastertoescpII
    Version:    
    Code Type:  
    X86-64 (Native)
    Parent Process:  cupsd [15]
    Date/Time:  
    2013-08-09 11:30:46.469 -0400
    OS Version: 
    Mac OS X 10.6.8 (10K549)
    Report Version:  6
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000000
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    whenever I try to print anything. I tried repairing permissions and downloaded the update manually from Apple and ran with the same results. I am running OS X 10.6.8 on a 2.53 GHz Intel Core 2 Duo Mac mini and printing to an Epson WorkForce 630

    Disconnect all devices from the computer then do the following:
    Boot up from your Snow Leopard Install DVD while holding down the "c" key.
    Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
    Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
    Once this process has been completed restart your computer and repair permissions directly from Disk Utility.
    If Disk Utility is unable to complete the repair, you will need to use a stronger 3rd party utility like DiskWarrior, Techtool PRO (not Deluxe) or Drive Genius.
    Reinstall the driver directly from Epson's website.  If you are still having problems after the reinstall, you should contact Epson tech support for a solution and/or work-a-round. 

  • I downloads the latest iTunes software update and it properly installed.  But,  I cannot close the window showing it was completed and the blue completion bar is full but cannot cancel or close it either.  Any ideas on how to clear that out and close the

    I downloaded the latest iTunes software update and it properly installed.  But,  I cannot close the update window showing it was completed and the blue completion bar is full but cannot cancel or close it either.  Any ideas on how to clear that out and close the window.  Tried to quit on both the big window and the software update title in the menu bar.  No luck.

    Tried that by shutting down via the power button only as the normal shutdown was nixed by the open window issue.  It did not help.  Found a very similar question in the discussions and it recommended "Force Quit".  That worked and the update works normal and the window is gone.  Thanks!

  • How do you view lyrics on itouch with the new Jan. software update??

    How do you view lyrics on itouch with the new Jan. software update??
    Thanks!!

    1) You need to have the paid upgrade installed.
    2) You need to paste the lyrics into the lyrics tab of a song/album.
    3) You need to re-sync the Touch.
    4) When playing music, you click on the album cover (in portrait mode only) and the lyrics will superimpose on the screen.
    Scott
    Message was edited by: A A P L

Maybe you are looking for

  • TP-Link TD-W8961ND Wireless-N ADSL2+ Modem Router ...

    has or are anyone using this TP-Link TD-W8961ND Wireless-N ADSL2+ Modem Router - Version 2 instead of the bt home hub 3?  i need some help because all i get is dropouts after i have set the settings up in the device i use the defualt settings advised

  • Moving User's Home Directory from one Xserve to another

    Does anyone know the procedure for moving users (Home Directory) from one server to another? Is there an application that can do this? Xserve G5   Mac OS X (10.4.4)  

  • Is there a MacBook Pro software version for an old PalmVx?

    Is there a MacBook Pro 10.9 Maverick software version for an old PalmVx?

  • How do I control the size of my photos in iWeb?

    Hello I wish to ask if it is possible to control the size of a photo in iWeb when publishing photos. What I want is that people can press on any photo in my collection and see it in high resolution. But at the moment it is messing with my photos. Som

  • Region Position 3

    Hi, I have a report in the region position 3 of the page, the problem when I use this position is some columns of the report become smaller like employee name become Employee Name and most of the names become in 2 different rows (first name, last nam