N80 email access point wandering

Hiya
I've set up email and wlan fine - and the standard Orange settings for GPRS are working with no problems.
My issue is when I start wandering around!
I set up the phone to check for email though my wifi connection on a regular basis. The idea is that I'm sitting around in the evening without a PC on and my phone will alert me of new email. This also works fine.
However when I leave my hotspot, I want the phone to think "err ok I can't get that connection, I won't keep checking email". I thought that "only in home net." would probably do this in "Automatic retrieval". This appears to work ok as the "Access point in use" for "Incoming email" is et to my wlan..
But, when I go out and about and manually try and check my email, the phone says "Can't find [wlan]" and gives up with no option to check the GPRS connection.
Err - any ideas? I don't think I'm trying to do anything out of the ordinary. I just wwant regular email checks when I'm within range of my lan, and this to stop (unless I manually override) when my only option is internet access that I have to pay for.
I don't see tinkering with the settings on 3 email accounts whenever I come in / go out to be an option.
Any ideas?
Thanks in advance,
Neil
www.babylondirect.com

Menu > Tools > Settings Wizard.
If this doesn't work, back up everything and type *#7370# to soft reset or take it to your nearest Nokia Service Centre and get software version 4.
Nokia N80 - v4.0623.0.41

Similar Messages

E75 Email (Access Point problem)

Hi,
I've setup nokia email without any problem using my WiFi and it was synchronizing without a problem. Since then I've I'm unable to change the Access Point to my Mobile provider. I keep getting "Server not found", even though the server name is still properly configured (netac3.vie.hosting.com). Can anyone help?
Regards,
Nuno

Sorry when I wrote this was in Houston at the Continental Presidents club being yelled at... sorry
The problem still exists, with no solution found so far, can anyone help?

Nokia Email Access Point Configuration Disappeared

I`ve just upgraded to the new Nokia Email client on my N95-1 (model RM-159). It says it's version 9.04 (21).
Since upgrading, I haven't been able to configure the Access Point to be used by the email app, which used to be under General|Service Info. This is quite important to me, since I only want to let the app work when using WiFi.
Does anyone know what happened, or how can I fix it ?

This works for the E71: for the time being a workaround for the access point problem:
I set my SmartConnect connection (you can only download this from the Download icon on your phone) group as the default APN, I have the client using Wifi if available and the cellular network if not. This MUST be configured at initial setup, ie when you install Nokia Messaging, change it from "default" to the SmartConnect access point group.

Setting email access point

I'm trying to set my internet access point for emails to automatic. But it only gives me an option to pick one. I want it to connect to my few preffered access points only so how do I fix this.
Appreciate your help

I found the solution...I think.
If you set it on default connection then it should just connect to the network your on, or the next priority.

Nokia email - access point

I have an N96 with S60 r3 fp2. It supports "destinations" (ie access point groups) as well as the concept of a "default" access point (group).
Only "new" apps use these capabilities. The internal imap client seems to be ok with default, but "nokia messaging" is not and will only allow a specific AP to be selected.
Since I have trouble with 3G/GSM at work I roam onto WIFI for other apps. NOkia messaging needs to do the same.
Ideas?

This works for the E71: for the time being a workaround for the access point problem:
I set my SmartConnect connection (you can only download this from the Download icon on your phone) group as the default APN, I have the client using Wifi if available and the cellular network if not. This MUST be configured at initial setup, ie when you install Nokia Messaging, change it from "default" to the SmartConnect access point group.

Using n80 wlan on mixed mode n/g access point?

I have a d-link dgl-4500. I use it in mixed mode n/g. My computers can connect just fine.
If I want to get the n80 to connect, I have to first change the wireless channel to 11 and then change it to channel 1.
Then and only then will my n80 find the access point.
If I set my AP to G only, then the wlan fires right up.
I'm not an expert on wifi. Are there any advanced wifi settings I can change to help my n80 find the AP easier?
current settings:
2.4GHz mode
mixed n/g mode
2.412 CH. 1
auto transmission rate
20MHz channel width
visible SSID
beacon 100
RTS threshold 2346
fragmentation threshold 2346
DTIM 1
short GI yes
802.11b protection no
Those are my current settings.
Thanks for anyone who can help.

I have a d-link dgl-4500. I use it in mixed mode n/g. My computers can connect just fine.
If I want to get the n80 to connect, I have to first change the wireless channel to 11 and then change it to channel 1.
Then and only then will my n80 find the access point.
If I set my AP to G only, then the wlan fires right up.
I'm not an expert on wifi. Are there any advanced wifi settings I can change to help my n80 find the AP easier?
current settings:
2.4GHz mode
mixed n/g mode
2.412 CH. 1
auto transmission rate
20MHz channel width
visible SSID
beacon 100
RTS threshold 2346
fragmentation threshold 2346
DTIM 1
short GI yes
802.11b protection no
Those are my current settings.
Thanks for anyone who can help.

N80 access points

i checked that there were no access points defined. when i went to "net" it asked me to choose connection it came up with vodafone internet gateway. I dont know why its like that? i went to settings and there was no access points there at all.
next thing i did was use nokia settings wizard to get my vodafone access points and it created "vodafone internet gateway(1)"
in settings->access points, there is only one copy of it there.
when i go to "net" it asks for which connection i should use and i see two copies there.
why is like this?
under settings there is only one copy but somehow the fone thinks there is 2 so it must have been setup or entered somewhere and i cant seem to find out where or what i should do about it
remember, this is from a fresh reformat of my fone.
anyone got any ideas of what i should do without having to format again? formatting again might work, but then again it might not.
maybe its stored on my sim card automatically and thats where it is?
i just dont know

Have you sent up email retrieval to automatically download, check the email settings?
Otherwise you might have setup some SIP settings. Do you have any profiles in Tools, Settings, Connection, SIP Settings? If so and you know you are not using them, then delete them.
Another one to check, although less likely is under Tools, Settings, Connection, Packet Data and check that is set to "When needed" and "None"
(PS always usful to post your SW version so we know where you are coming from....)

N86 8MP, Nokia Email 2.1.0, Access point troubles

I know that his has been an never ending saga. I just don't seem to be able to give it up.
There is a well known issue about Nokia Email 2.1.0 not being able to define group access points.
When I try to do that I am offered only particular access points or "None". This is ever so annoying as I have to manually change the access point every time I leave my home WiFi.
I am aware that there are ways around this using connection manager apps (I tried several: Auto WeFi, Easy WiFi.... ) but I was not happy with the results. One of them even disabled me from editing my access points.
It is weird that it is possible to define "Internet" as a access point for Exchange but not for normal e-mail providers.
Some people suggested to setup acces point to "Default" while setting up a new email account. However, I've never seen this option.
I think Nokia's terminology is so vague. What would be "Default" connection as opposed to "Internet"?
In addition, in "Network Destionations" it is possible to define the "Internet" group as "Default" so this will be the same thing, or...??? Am I missing something?
I stumbled upon this article that Nokia would release a patch addressing this access point issue.
I spent hours searching for the patch to no avail. Does anybody know whether that patch exists at all?
http://www.e71fanatics.com/2009/01/big-ooops-in-recent-nokia-email-version.html
Having exhausted all possibilities I was thinking I could install Nokia Messaging 9.7. Apparently this version is compatible with S60v3 unlike the Nokia Messaging 10.2.
I have no idea whether Nokia Messaging 9.7 was ever ment to be for N86 8MP but if not does anybody know whether the unsigned version could be installed instead?
I would appreciate any piece of advice or suggestion.
Alex

Hello!
I can't update my e-mail client via Nokia e52 internet browser.
I enter address email.nokia.com, click download link. The application Nokia Email 9.07 has downloaded. After this the suggesting message to install Nokia Email 9.07 appears. But error appears after my agreement - "An incompatible version of this product is detected, and has to be uninstalled first"
I have no possibility to uninstall detected Email, so I don't see any Email client in Application Manager.
Nokia developers, please, fix this bug as soon as possible

E55 user defined access point for outgoing email (...

Hello
I changed the outgoing default connection in E55 here:
menu. email. settings. mymailbox. mailbox settings. advanced mailb settings.outgoing mail settings. access point in use. user defined
now when i do a email message it doesnt send when i choose send in any new email message
it seems a bug, because it does not quit of the send option, it appears a little window sending email, but it does not send!
then if i try to get out the only options are delete/save to drafts
can this be fixed?
Peter

peter_p wrote:
Hello
I changed the outgoing default connection in E55 here:
menu. email. settings. mymailbox. mailbox settings. advanced mailb settings.outgoing mail settings. access point in use. user defined
now when i do a email message it doesnt send when i choose send in any new email message
it seems a bug, because it does not quit of the send option, it appears a little window sending email, but it does not send!
then if i try to get out the only options are delete/save to drafts
can this be fixed?
Peter
Are you using a WLAN or GPRS accesspoint?
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Automatic Email Retrieval through Access Point Gro...

Hi,
Has anyone else had problems with applications locking up while using 'Automatic Retirieval' through 'Access Point Groups' on a wireless network?
My phone works fine in every other respect but as soon as I schedule it to access my email account (not BB) I invariably get one of the following instabilities:
The email application will not collect at the set intervals or...
It'll collect emails at the set intervals for a while & then lock up either the:
• Email application,
• All internet applications,
• The 'Email key' (but the application is still accessible via the icons).
• or the Email Key loses its settings: ‘Item no longer available. Restoring default multimedia key’
I can manually collect email & use the web through the same ‘Access Point Group’ & I have two other computers running off this wireless network fine?
Nokia E61. Firmware: 1.0310.04.04Message Edited by infinitybeach on 13-Jun-2006
11:28 AM

This sounds like a reasonable request, is the v11 firmware just broken in this regard?

Can interference cause an access point to reboot?

I recently configured our WCS to send email notifications. Monitor > Alarms > Email Notification
I now receive emails from WCS stating that some access points dissassociate from the controller, and then another email stating they are back again. Not the same APs, not all at the same time, etc. We have 1200+ access points. A very small percentage... maybe one or two per day decide to leave the controller and then come back.
Looking at the controller, I see this is a true statement. I see that the access point's uptime is equivalent to the time is left the controller and came back again.
My question is... does anyone else have this configured, and if so, what was causing the access points to disassociate? I cannot tell if the access point is actually rebooting or simply wandering away from home.
Is there a way to see what caused the AP to leave and come back again? With nobody in the building at 7pm, I don't think it was human intervention. Other access points on the same switch, and they don't wander. I do wonder if interference or something else can cause an access point to reload.
The APs are AIR-LAP1210 on a 5508 running 7.0.98.0
Are there any known bugs that you are aware of?
Thanks in advance!
WCS has detected a change in one or more alarms of category AP and severity Critical in Virtual Domain root.
The new severity of the following items is Clear:
'802.11a' interface of AP 'ap02' associated to controller 'WLC-1 (10.10.10.1)' is up. Reason: Radio interface reset.
'802.11b/g' interface of AP 'ap02' associated to controller 'WLC-1 (10.10.10.1)' is up. Reason: Radio interface reset.
AP 'ap02' associated with Controller '10.10.10.1' on Port number '13'.
E-mail will be suppressed up to 30 minutes for these changes.
WCS has detected one or more alarms of category AP and severity Critical in Virtual Domain root for the following items:
802.11a interface of AP ap02 is down: Controller 10.10.10.1
802.11b/g interface of AP ap02 is down: Controller 10.10.10.1
AP 'ap02' disassociated from Controller '10.10.10.1'.
E-mail will be suppressed up to 30 minutes for these alarms.

You are in luck. Like you we have 4500 radios and we turned on alerts and we got slammed on this as well. I will share with you some of the things that contriubuted to our problem. It just wasnt one issue...
1) We had 200 APs configured as a primary to 1 WLC. Well that WLC could only take 150. So when one AP jumped off there were 50 other aps interested in getting on. And when this happened we got an alert. We only fill 125 per wism today. This cut down on a good portion of our alerts
2) We disbaled ap fall back. Once the aps were where we wanted them we killde ap fall back. (no more bouceing around).
3) We had a few aps with link problems. Not many but a few. These aps would lose data connection but still keep power and not reboot. We either had to replace the patch cable or do a new run.
Take a few and investigate them. You will start to develop your own pattern.
If you find this helpful please kindly rate all helpful post!

Prompt never appears in a 2602i access point

Hello:
Today I converted an AIR-CAP2602I-A-K9 access point to autonomous using the mode button/tftp method, but no matter what IOS I install (I tried 2 different IOS and also tried entering to Rommon - I am able to change IOS because the procedure I used does not need any command), i never get to see the prompt so that I can introduce commands to configure the AP. It's like it hangs after "succesfully" initializing
The only thing I can see all the time are "normal" console messages, and It shows no error message at all. It happened even before the downgrade.
This is where the AP stops, but it is not really hung because console messages could keep showing up. It just never gets to the promt so I can enter some commands. Would not even acept Enter.
Cisco IOS Software, C2600 Software (AP3G2-K9W7-M), Version 15.2(4)JA1, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Tue 30-Jul-13 23:12 by prod_rel_team
Initializing flashfs...
flashfs[3]: 200 files, 7 directories
flashfs[3]: 0 orphaned files, 0 orphaned directories
flashfs[3]: Total bytes: 31739904
flashfs[3]: Bytes used: 14286848
flashfs[3]: Bytes available: 17453056
flashfs[3]: flashfs fsck took 9 seconds.
flashfs[3]: Initialization complete.
flashfs[4]: 0 files, 1 directories
flashfs[4]: 0 orphaned files, 0 orphaned directories
flashfs[4]: Total bytes: 11999232
flashfs[4]: Bytes used: 1024
flashfs[4]: Bytes available: 11998208
flashfs[4]: flashfs fsck took 0 seconds.
flashfs[4]: Initialization complete.
Copying radio files from flash: to ram:
Copy in progress...CCCCC
Copy in progress...CCC
Copy in progress...CCCC
Copy in progress...CCCC
Copy in progress...CC
Uncompressing radio files...
...done Initializing flashfs.
Radio0 present 8764 8000 0 A8000000 A8010000 0
Rate table has 244 entries (64 SGI/104 BF variants)
Radio1 present 8764 8000 0 88000000 88010000 4
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-SAP2602I-A-K9 (PowerPC) processor (revision A0) with 180214K/81920K bytes of memory.
Processor board ID FGL1716S0Q6
PowerPC CPU at 800Mhz, revision number 0x2151
Last reset from power-on
1 Gigabit Ethernet interface
2 802.11 Radios
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: BC:16:65:95:A7:C3
Part Number                          : 73-14588-02
PCA Assembly Number                  : 800-37899-01
PCA Revision Number                  : A0
PCB Serial Number                    : FOC17151DSW
Top Assembly Part Number             : 800-38356-01
Top Assembly Serial Number           : FGL1716S0Q6
Top Revision Number                  : A0
Product/Model Number                 : AIR-CAP2602I-A-K9
Press RETURN to get started!
*Mar 1 00:00:11.819: %IFMGR-7-NO_IFINDEX_FILE: Unable to open nvram:/ifIndex-table No such file or directory
*Mar 1 00:00:11.935: FIPS IOS test Image Checksum successful
*Mar 1 00:00:11.935: FIPS IOS test Crypto RNG DEK Key Test successful
*Mar 1 00:00:11.939: FIPS IOS test SHA-1 successful
*Mar 1 00:00:11.939: FIPS IOS test HMAC-SHA1 successful
*Mar 1 00:00:11.939: FIPS IOS test AES CBC 128-bit Encrypt successful
*Mar 1 00:00:11.939: FIPS IOS test AES CBC 128-bit Decrypt successful
*Mar 1 00:00:11.939: FIPS IOS test IOS AES CMAC Encrypt successful
*Mar 1 00:00:11.939: FIPS IOS test IOS CCM Encrypt successful
*Mar 1 00:00:11.939: FIPS IOS test IOS CCM Decrypt successful
*Mar 1 00:00:11.939: FIPS IOS test RSA Signature Generation successful
*Mar 1 00:00:11.939: FIPS IOS test RSA Signature Verification successful
*Mar 1 00:00:11.939: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
*Mar 1 00:00:18.863: FIPS RADIO test AES 128-bit encrypt for TX on Dot11Radio 0 successful
*Mar 1 00:00:18.863: FIPS RADIO test AES 128-bit CCM encrypt on Dot11Radio 0 successful
*Mar 1 00:00:18.863: FIPS RADIO test AES 128-bit CCM decrypt on Dot11Radio 0 successful
*Mar 1 00:00:18.863: FIPS RADIO test AMAC AES 128-bit CMAC encrypt on Dot11Radio 0 successful
*Mar 1 00:00:18.863: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
*Mar 1 00:00:24.991: FIPS RADIO test AES 128-bit encrypt for TX on Dot11Radio 1 successful
*Mar 1 00:00:24.991: FIPS RADIO test AES 128-bit CCM encrypt on Dot11Radio 1 successful
*Mar 1 00:00:24.991: FIPS RADIO test AES 128-bit CCM decrypt on Dot11Radio 1 successful
*Mar 1 00:00:24.991: FIPS RADIO test AMAC AES 128-bit CMAC encrypt on Dot11Radio 1 successful
*Mar 1 00:00:24.991: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1
*Mar 1 00:00:25.007: initializing dot11 onplus
*Mar 1 00:00:25.259: not a autoconfig enabled device!!!
*Mar 1 00:00:27.039: %LINK-6-UPDOWN: Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:28.039: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to down
*Mar 1 00:01:13.383: Starting Ethernet promiscuous mode
*Apr 12 07:12:42.000: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Apr 12 07:12:42.000: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
*Apr 12 07:12:42.003: %CDP_PD-4-POWER_OK: Full power - AC_ADAPTOR inline power source
*Apr 12 07:12:42.011: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C2600 Software (AP3G2-K9W7-M), Version 15.2(4)JA1, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Tue 30-Jul-13 23:12 by prod_rel_team
*Apr 12 07:12:42.011: %SNMP-5-COLDSTART: SNMP agent on host ap is undergoing a cold start
*Apr 12 07:12:42.991: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Apr 12 07:12:42.999: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Apr 12 07:12:42.999: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Apr 12 07:12:44.651: %SOAP_FIPS-2-SELF_TEST_HW_SUCCESS: HW crypto FIPS self test passed
*Apr 12 07:12:44.651: DPAA Initialization Complete
*Apr 12 07:12:44.651: %SYS-3-HARIKARI: Process DPAA INIT top-level routine exited
*Apr 12 07:12:44.971: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up <--- CURSOR STOPS HERE AND WON'T ACCEPT ENTER OR ANY OTHER KEYBOARD ACTION
Any thoughts?
Best regards and thanks in advance

Leo, I'm usign SecureCrt, so I disabled XON/XOFF and DTR/DSR as usual, but was not disabling RTS/CTS, so I did and now it is working. Thank you very much!

How to set up email access on N95 8GB?

Hi
I have an N95 8GB.
I have recently added a data bolt on for accessing work email from my phone and would like to receive a text/message when I receive a new email.
Problem is I can't find any information on how to set this up.
This link looked perfect:
http://www.knowyourmobile.com/nokia/nokian95/nokian95internet/2533/setting_up_email_on_the_nokia_n95...
but following it through on my phone doesn't come up with the same options etc.
So far I have gone to 'messaging', selected 'change me', then - Options - Email Settings - Connection Settings - Incoming e-mail.
Here I am stuck.
Is my username my email address?
Is my password my email account password?
What is my incoming mail server?
What is my access point in use?
What setting should security ports be on?
The settings also say that I cannot have email notifications and email retrieval together. What does this mean?
I would really appreciate it if anyone out there can help.
Thank you

Hi, I'm a newbie at this, so pls be patient with my terminology... I want to install 2 or 3 of these cameras in my mother's home, and I will have AT&T DSL service (one dynamic IP address) there with only a modem/wireless router. I want to access the cameras from my laptop or from my Blackberry Tour when I am traveling. Also want to allow access for my other relatives. I do not have another home computer to serve as a WHS, and my laptop is obviously not connected to the internet all of the time. Can I use the DDNS setup with DynDNS to provide access? The instructions that I read seemed to imply that I needed a WHS in order to forward ports, etc. Thanks in advance for your help.. Garry

AirPort Extreme (5th Gen) WiFi access point disappears but wired ethernet is ok

My AirPort Extreme SSID and access point "disappear" randomly from available WiFi networks. I had a 1st gen AirPort Extreme and never had this problem until earlier this year. I thought it might be a failing radio in the 1st gen unit so I used it as a good excuse to get a 5th gen AirPort extreme about 3 months ago. Same problem has been occuring; unfortunately it is random and I cannot get a handle on what/when/why it is happening.
For example, my iPhone 4S was connected to the network at about 1700 today and when I next checked the phone around 2115, no wifi connection and my network was not listed in the WiFi connections. The base station is away from other wireless devices (mouse, keyboard) and is about 10 feet from the nearest PC and monitor. Both printers are accessed via ethernet, not wifi. The strange and puzzling thing is that the PC, which is connected by ethernet to the AirPort Extreme, is still connected to the internet (I can browse, check email, newsgroups, etc.).
When I run the AirPort Utility, the base station is identified (AirPort Extreme 802.11n 5th Generation), there is an appropriate IP address, Version 7.6 firmware, and MAC address is listed. However, when I attempt to Continue or do a Manual Setup, I'm prompted for the admin password, the progress bar moves during 'reading from the Apple wireless device. Please wait...,' and then the utility reports "An error occured while tryong to access the Apple wireless device. Make sure your network connection is valid and try again. Error -6722.
If I unplug, wait, and reattach the power to the base station, WiFi becomes available again. When the WiFi connection "disappears", the LED light is solid green.
Any insights are appreciated; please let me know other helpful information I can provide.
Scott

I have the exact same problem and it's driving me nuts.
I bought an airport extreme n last week and plugged it in, hooked it up to my adsl router by Ethernet, configured it to set up a new wifi network and got the green light. I use an iPhone 4, iPad 2, and Windows 7 PC with an N wifi adaptor.
The airport works fine for about 2 hours before the wireless network disappears without a trace. Green light remains on the base station and I can connect fine by Ethernet.
"it just don't make sense"
I hope it's not a windows-7-only thing, Apple.
PS. Updated firmware to the newest version, no difference.
Airport is near to a wireless phone so I set a specific wireless channel and frequency to prevent a clash. No change.

Email start point issue com.adobe.idp.dsc.provider.service.email.impl.EmailProviderException: Error

Hi,
I have configured email start point process. While deploying and invoking the process it is not showing any kind of error. But when i send mail to configured SMTP server i recieves a mail saying
LiveCycle ES has tried to process your request and encountered the following error:
com.adobe.idp.dsc.provider.service.email.impl.EmailProviderException: Error getting user context
This response to your original email
Subject:hadshafds
Date Sent:Wednesday, May 25, 2011 12:22 PM
Body:
Attachments:
Why i am getting error. I have tested the pop3 and smtp mail server using send and recieve activity. But when i send some mail to configured server to start a activity it replies with a mail that there is some error.
Please help me out with this issue.
Regards
Sunil

Hi Diana,
i tried to add the user and gave invoke access but still having the same issue.
Please find the following log error
19:24:20,633 ERROR [STDERR]     ... 60 more
19:24:20,635 ERROR [EmailResultHandlerImpl] Internal error.
19:27:50,472 ERROR [EmailWriterImpl] EmailWriterImpl error : Unknown SMTP host: testSebi
19:27:50,474 ERROR [STDERR] javax.mail.MessagingException: Unknown SMTP host: testSebi;
nested exception is:
        java.net.UnknownHostException: testSebi
19:27:50,480 ERROR [STDERR]     at com.sun.mail.smtp.SMTPTransport.openServer(SMTPTransport.java:1280)
19:27:50,482 ERROR [STDERR]     at com.sun.mail.smtp.SMTPTransport.protocolConnect(SMTPTransport.java:370)
19:27:50,484 ERROR [STDERR]     at javax.mail.Service.connect(Service.java:275)
19:27:50,486 ERROR [STDERR]     at javax.mail.Service.connect(Service.java:156)
19:27:50,488 ERROR [STDERR]     at com.adobe.idp.dsc.provider.service.email.impl.EmailWriterImpl.send(EmailWriterImpl.java:2 60)
19:27:50,490 ERROR [STDERR]     at com.adobe.idp.dsc.provider.service.email.impl.write.EmailResultHandlerImpl.handleFailure( EmailResultHandlerImp
l.java:529)
19:27:50,494 ERROR [STDERR]     at com.adobe.idp.dsc.provider.service.email.impl.write.EmailResultHandlerImpl.handleFailure( EmailResultHandlerImp
l.java:425)
19:27:50,498 ERROR [STDERR]     at com.adobe.idp.dsc.provider.service.email.impl.scan.EmailScanJobImpl.handleFailure(EmailSc anJobImpl.java:621)
19:27:50,500 ERROR [STDERR]     at com.adobe.idp.dsc.provider.service.scheduler.scan.impl.AbstractScanJob.invokeJob(Abstract ScanJob.java:142)
19:27:50,502 ERROR [STDERR]     at com.adobe.idp.dsc.provider.service.email.impl.scan.EmailScanJobImpl.processInputs(EmailSc anJobImpl.java:165)
19:27:50,504 ERROR [STDERR]     at com.adobe.idp.dsc.provider.service.email.impl.scan.EmailScanJobImpl.execute(EmailScanJobI mpl.java:102)
19:27:50,506 ERROR [STDERR]     at sun.reflect.GeneratedMethodAccessor509.invoke(Unknown Source)
19:27:50,508 ERROR [STDERR]     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
19:27:50,510 ERROR [STDERR]     at java.lang.reflect.Method.invoke(Method.java:597)
19:27:50,511 ERROR [STDERR]     at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke(DefaultPOJOInvokerImpl.jav a:118)
19:27:50,514 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.InvocationInterceptor.intercept(InvocationInterceptor. java:140)
19:27:50,516 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
19:27:50,518 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.DocumentPassivationInterceptor.intercept(DocumentPassi vationInterceptor.jav
a:53)
19:27:50,522 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
19:27:50,524 ERROR [STDERR]     at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor$1.doInTransaction(Transa ctionInterceptor.java
:74)
19:27:50,528 ERROR [STDERR]     at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.execute(EjbTr ansactionCMTAdapterBe
an.java:357)
19:27:50,531 ERROR [STDERR]     at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.doSupports(Ej bTransactionCMTAdapte
rBean.java:227)
19:27:50,535 ERROR [STDERR]     at sun.reflect.GeneratedMethodAccessor332.invoke(Unknown Source)
19:27:50,537 ERROR [STDERR]     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
19:27:50,539 ERROR [STDERR]     at java.lang.reflect.Method.invoke(Method.java:597)
19:27:50,541 ERROR [STDERR]     at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
19:27:50,543 ERROR [STDERR]     at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionConta iner.java:237)
19:27:50,545 ERROR [STDERR]     at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionI nterceptor.java:158)
19:27:50,547 ERROR [STDERR]     at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstance Interceptor.java:169)
19:27:50,551 ERROR [STDERR]     at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
19:27:50,553 ERROR [STDERR]     at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
19:27:50,555 ERROR [STDERR]     at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:378)
19:27:50,557 ERROR [STDERR]     at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
19:27:50,559 ERROR [STDERR]     at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
19:27:50,561 ERROR [STDERR]     at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
19:27:50,563 ERROR [STDERR]     at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor. java:138)
19:27:50,565 ERROR [STDERR]     at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
19:27:50,567 ERROR [STDERR]     at org.jboss.ejb.Container.invoke(Container.java:960)
19:27:50,569 ERROR [STDERR]     at org.jboss.ejb.plugins.local.BaseLocalProxyFactory.invoke(BaseLocalProxyFactory.java:430)
19:27:50,571 ERROR [STDERR]     at org.jboss.ejb.plugins.local.StatelessSessionProxy.invoke(StatelessSessionProxy.java:103)
19:27:50,573 ERROR [STDERR]     at $Proxy205.doSupports(Unknown Source)
19:27:50,575 ERROR [STDERR]     at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute(EjbTransactionProvi der.java:104)
19:27:50,577 ERROR [STDERR]     at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor.intercept(TransactionInt erceptor.java:72)
19:27:50,580 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
19:27:50,582 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.InvocationStrategyInterceptor.intercept(InvocationStra tegyInterceptor.java:
55)
19:27:50,586 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
19:27:50,588 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.InvalidStateInterceptor.intercept(InvalidStateIntercep tor.java:37)
19:27:50,590 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
19:27:50,592 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.AuthorizationInterceptor.intercept(AuthorizationInterc eptor.java:188)
19:27:50,594 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
19:27:50,596 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.JMXInterceptor.intercept(JMXInterceptor.java:48)
19:27:50,598 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
19:27:50,600 ERROR [STDERR]     at com.adobe.idp.dsc.engine.impl.ServiceEngineImpl.invoke(ServiceEngineImpl.java:121)
19:27:50,602 ERROR [STDERR]     at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:129)
19:27:50,603 ERROR [STDERR]     at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.routeMessage(AbstractMessage Receiver.java:93)
19:27:50,606 ERROR [STDERR]     at com.adobe.idp.dsc.provider.impl.vm.VMMessageDispatcher.doSend(VMMessageDispatcher.java:22 5)
19:27:50,608 ERROR [STDERR]     at com.adobe.idp.dsc.provider.impl.base.AbstractMessageDispatcher.send(AbstractMessageDispat cher.java:66)
19:27:50,610 ERROR [STDERR]     at com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:208)
19:27:50,612 ERROR [STDERR]     at com.adobe.idp.scheduler.callback.ServiceCallbackHandler.execute(ServiceCallbackHandler.ja va:87)
19:27:50,614 ERROR [STDERR]     at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
19:27:50,616 ERROR [STDERR]     at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:529)
19:27:50,618 ERROR [STDERR] Caused by: java.net.UnknownHostException: testSebi
19:27:50,620 ERROR [STDERR]     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:177)
19:27:50,621 ERROR [STDERR]     at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
19:27:50,623 ERROR [STDERR]     at java.net.Socket.connect(Socket.java:529)
19:27:50,624 ERROR [STDERR]     at java.net.Socket.connect(Socket.java:478)
19:27:50,626 ERROR [STDERR]     at com.sun.mail.util.SocketFetcher.createSocket(SocketFetcher.java:232)
19:27:50,627 ERROR [STDERR]     at com.sun.mail.util.SocketFetcher.getSocket(SocketFetcher.java:189)
19:27:50,629 ERROR [STDERR]     at com.sun.mail.smtp.SMTPTransport.openServer(SMTPTransport.java:1250)
19:27:50,631 ERROR [STDERR]     ... 60 more
19:27:50,633 ERROR [EmailResultHandlerImpl] Internal error.

N80 email access point wandering

Similar Messages

Maybe you are looking for