N80 - Equivalent of PC Suite to iMac OSx 10.5.2...

My N80 has PC Suite downloaded onto phone and ex PC. N80 and PC communicated succesfully.
Trying to download Mac software via iMac to N80 produces System Error message on N80.
Any help?
Thanks

28-Feb-2008 10:46 AM
mikes5762 wrote:
My N80 has PC Suite downloaded onto phone and ex PC. N80 and PC communicated succesfully.
Trying to download Mac software via iMac to N80 produces System Error message on N80.
Any help?
Thanks
huh?
i'm trying to figure out what you mean by this:
"trying to download mac software via iMac to N80 produces System Error message on N80."
it sounds like you're trying to install software on the n80 to be used when syncing up the mac and n80... you dont need to do this. the n80 (like all compatible nokias) provides sync services via an open standard called SyncML. this is not an application, but a standard method of doing things. it just works, but only if you have a SyncML compliant software running on the computer you want to sync up with.
according to this page:
http://europe.nokia.com/A4299040
isync 2.4 is supported out-of-the-box.
and according to this page:
http://www.apple.com/macosx/features/isync/
isync 3.0 is supported out of the box.
i'm left wondering exactly whats going on over there, so lets iron out the details:
1. what version of macosx are you running? (and what version of isync?)
2. are you connecting via usb or bluetooth?
3. exactly what process have you followed thus far?
i've heard of people getting errors on their phones if they try to sync the phone with both a windows pc and a mac - something about both of them using a default profile or something. if you have your data backedup, you MIGHT try a hard reset to see if the isync works on your phone if it has never been touched by pc suite (i imagine that if this works, pc suite would not work again until you hard reset once more, making the 2 sync softwares mutually exclusive. you might care to research that a bit before jumping in and erasing your data)
good luck
N95-1 ---> N97-NAM ---> N900 ---> E7-00 + N900 (I use them both)
(N95 was pretty good, N97 had potential but utterly failed to deliver, N900 is absurdly good. Those of you wondering, "should I try N900/Maemo/MeeGo"? The answer is a resounding YES)

Similar Messages

Nokia 8800 Arte and iMac OSX 10.6

Tried to synchronize the Nokia 8800 Arte with the iMac OSX 10.6. Bluetooth connection works, so exchange of films and photo's are OK. Synchronization via blue tooth iSync does not function because iMac does not have 'plug-in'. Nokia does not provide a solution. Also PC Suite for Nokia 8800 Arte and iMac OSX 10.6 is not available at Nokia support/downloads. Nokia support promised to ask for investigation of the possibility of developing and verifying a solution.

Hi PAHU, thanks for helping. I´ve tried 2 different and brand new cables and still nothing appears on the USB list in System Profiler. I´ve tried restarting both with printer and off, etc, still it aint there. Connecting my iPhone to the same USB ports, the iPhone shows up in System Profiler, so the ports must be ok.
I tried connecting the printer to my girlfriends Macbook Pro, OS X 10.6.4. and the printer does show up on the System Profiler. The printer seems to be online but when I tried to print a page of text, it "went offline" and gave an error 306A "communication error blabla". I downloaded a new driver from Canons site and now it says its printing, the printer starts blinking its green light, but nothing happens except it switches to saying the printer is offline.
This is very confusing...

I have an iMAC/OsX from 2005 and now cannot anymore download and exicute programs (both net and installing CD). Any settings/preferentials which I should look at?

I have an iMAC/OsX from 2005 and now cannot anymore download and exicute programs (both net and installing CD). Any settings/preferentials which I should look at?

Unfortunately what you need is something that is designed for PowerPC Macs. Stuff that is designed for Intel Macs will not work. The PowerPC (PPC) Mac software is getting scarcer. Macs in 2006 shifted to Intel CPUs. Stuff that is designated Universal will work, and you can buy the retail 10.5 if you have no Mac OS 9 related software that needs to load. If you partition your hard disk, or use an external Firewire hard drive partition just for booting into 10.4.11 or earlier, you can still use Classic for Mac OS 9. My user tip here discusses your options:
https://discussions.apple.com/docs/DOC-2275
Don't dump your PowerPC Mac yet, Appleworks has no equivalent in the Intel Mac world once upgraded to Mac OS X 10.7 or later, and this tip covers Appleworks:
https://discussions.apple.com/docs/DOC-2522
So you are unfortunately stuck in the transition period, but if carefully reviewed can be done right if you ready all your documents for the transition when you can afford it.

Acmcneill1ug 14, 2014 7:16 AM I have IMac OSX 10.9.4, 4GB,Processor 3.06 with Intell2Duo. I would like to check for Malware. I run a TechTool Pro 6 every month and that comes up great. When check how much memory I am using, with only Safar

Acmcneill1ug 14, 2014 7:16 AM
I have IMac OSX 10.9.4, 4GB,Processor 3.06 with Intell2Duo. I would like to check for Malware. I run a TechTool Pro 6 every month and that comes up great.
When check how much memory I am using, with only Safari open I am using 3.9 and more of her 4.0 memory. She is very. very slow in processing. I had 4000
trash to clean out and it took her over an hour to expel. Also for some reason Safari will not allow me to click on a link, in my G-mail, and let it go to the page.
It has a sign saying a pop-up blocker is on and will not let me do it. I must open the stamp to look at my e-mails and if I have redirected link now I can do it.
I have not changed my preferences so where is this pop-up blocker?
I have looked at preferences on Safari and Google, which I do not understand Google, and do not see where this blocker could be.
Malware is something I want to make sure is not on my computer. Tech Tool Pro 6 is all I know of and it does not detect Malware.
Help.
Ceil

Try Thomas Reed's Adware removal tool. He posts extensively in the communities.
Malware Guide - Adware
Malware Discussion

I can't open almost any app on my iMac (OSX Lion 10.7.4). Every time I attempt to do so, the app "unexpedtely quits" and can't go further. This happens with iTunes (when I turn to the iTunes Store), MacApp Store, Software updates an many other apps...

I can't open almost any app on my iMac (OSX Lion 10.7.4). Every time I attempt to do so, the affected app "unexpedtely quits", showing a window (sort of expanded dialog box) with the log history, wich form a complete report wich is said to be sent to Apple. Despite that this window has a "restart" button, I haven't been able to go any further from this point, as it repeats the process again and again, impeding me to use the affected app.
This has get to a critical point, as it is afecting apps like iTunes (especifically when I turn to the iTunes Store from within te app), MacApp Store, Software Updates (I can't update anything, given this problem) and many other apps, including Aperture 3, Fusion 4, integrated Dictionary and Wikipedia, as I've been able to verify.
As far as I'm concerned, it hasn't affected apps like Office, Vectorworks, Pixelmator, iDraw, Quick Note...
Can anybody help me on this matter?
Thanks a lot, in advance...
Marcus

Use Lion Recovery to repair the startup disk if necessary, or reinstall the Mac OS X.

I am trying to connect IMAC OSx 10.9.4 to Suddenlink thru ethernet connection in New Bern NC. No luck. Any hints?

I am trying to connect IMAC OSx 10.9.4 to Suddenlink thru ethernet connection in New Bern NC. No luck. Any hints?

If you bring up Safari browser, and go to www.google.com, does it give you an error?
It is possible that you are not getting DNS. From the OSX terminal can you run the following two commands
1. dig www.google.com
2. ifconfig en0
3. ifconfig en1
4. ping -c 3 www.google.com
1. Example output...
; <<>> DiG 9.8.3-P1 <<>> www.google.com
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 44161
;; flags: qr rd ra; QUERY: 1, ANSWER: 5, AUTHORITY: 0, ADDITIONAL: 0
;; QUESTION SECTION:
;www.google.com. IN A
;; ANSWER SECTION:
www.google.com. 92 IN A 173.194.121.18
www.google.com. 92 IN A 173.194.121.20
www.google.com. 92 IN A 173.194.121.16
www.google.com. 92 IN A 173.194.121.17
www.google.com. 92 IN A 173.194.121.19
;; Query time: 43 msec
;; SERVER: 192.168.1.1#53(192.168.1.1)
;; WHEN: Sat Sep 6 17:19:56 2014
;; MSG SIZE rcvd: 112
Example output for commands 2 and 3
ifconfig en0
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether b8:e8:56:35:bf:e2
inet6 fe80::bae8:56ff:fe35:bfe2%en0 prefixlen 64 scopeid 0x4
inet 192.168.1.9 netmask 0xffffff00 broadcast 192.168.1.255
nd6 options=1<PERFORMNUD>
media: autoselect
status: active
ifconfig en1
en1: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
options=60<TSO4,TSO6>
ether 72:00:00:79:ee:b0
media: autoselect <full-duplex>
status: inactive
Example output of 4.
ping -c 3 www.google.com
PING www.google.com (173.194.121.18): 56 data bytes
64 bytes from 173.194.121.18: icmp_seq=0 ttl=250 time=9.049 ms
64 bytes from 173.194.121.18: icmp_seq=1 ttl=250 time=10.568 ms
64 bytes from 173.194.121.18: icmp_seq=2 ttl=250 time=9.393 ms
--- www.google.com ping statistics ---
3 packets transmitted, 3 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 9.049/9.670/10.568/0.650 ms

Any fix for external Iomega HDD won't mount to iMac OSX 10.8.5 Desktop?

I have a 750GB Iomega external HDD that I've used for several years to back up my iMac (OSX 10.8.5) with Time Machine. No problems. Computer locked up while searching on the internet last night, requiring a restart. The external HDD never came back up on my desktop, It has power and all cable connectors are tight. The disk powers up and runs, but it just repeats its attempt to mount over and over, but won't show up on the desktop. So I can't run Disk Utility or any diagnostic software, since it isn't accessible form the iMac.
Any suggestions? I'm guessing my only option is to bite the bullet and buy a replacement backup hard drive, and start over from scratch in Time Machine. My attempts to look for help on the Iomega site have been frustrated by the new post merger Lenovo-EMC based site. Practically no references found to Iomega at all!

Yes, I checked that, and I tried restarting the computer with the HD turned on, then again with the HD turned off until after the computer finished booting up before turning the HD on. Nothing has worked to get the externa; drive to show up on the desktop. Thanks for replying. I'm not holding out much hope that the drive is going to work again. I'm on my way out to pick up a new backup drive. I figure I'll get one that is at least a TB, and 3.0 USB capable so that when the time comes that I replace my old iMac, the new drive will at least be able to back up the new equipment.

How do I move my iPhoto library from iMac G5 OSX 10.4 to iMac OSX 10.7?

How do I move my iPhoto library from iMac G5 OSX 10.4 to iMac OSX 10.7.2?

If you are doing an upgrade on the same Mac, just leave it where it is. When you do the upgrade, as long as it is not a "clean install" (wipe everything and start over), you should not lose any files.
If you are moving it to another Mac, move it to the same location in your user account on the other Mac. For example, no matter which Mac I'm on, the iPhoto library is always in Home/Pictures/iPhoto Library.

Wife and I have separate iOS devices, separate iCloud accounts. But we both want to access mail from the iMac (OSX Mavericks.) Currently only my mail is linked. How to configure so that wife's iCloud mail can be seen on iMac. Simple and explicit please!

My wife and I have separate ioS devices (iOS7) with separate iCloud accounts.
So we access our mail separately on these devices. But we would both like to be able to access mail at the desk top (iMac, OSX Mavericks). Currently only my mail is linked. How do I set up the Mac to allow it to access my wife's e-mail too, either in the same mail inbox or a separate one. Simple instructions please!

If Mail in Mavericks is the same as earlier versions you can select accounts in the sidebar, so that you can either display the inboxes for individual accounts, or the contents of all the account inboxes. (If the accounts don't show click the disclosure triangle next to 'INBOX'). The layout may have changed since the version I have - Snow Leopard - but you should be able to do the same thing.

Is there a way to connect an old Sunflower iMac (OSX 10.4.11) to a new Time Capsule? It used to work with old Airport Extreme with updates thru Snow Leopard but now seems to only allow WEP encryption instead of WPA.

Is there a way to connect an old Sunflower iMac (OSX 10.4.11) to a new Time Capsule? It used to work with old Airport Extreme network, run from a intel iMac with updates thru Mavericks but now seems to only allow WEP encryption instead of WPA and can't connect to Time Capsule. Airport Extreme Base was controllable from either computer up through Snow Leopard (I didn't do any of the Lion upgrades). Then when I upgraded to Mavericks I lost the ability to use Airport Utility with this hardware on the Sunflower but could still connect wirelessly to network without any problems. But now with the Time Capsule upgrade the Sunflower is blocked from network by a dialogue that requests ony WEP password, not WPA pwd used by Time Capsule. Neither can I use the old airport extreme base to extend the time capsule network since I can't input the correct password/encryption approach to join it. Is there a work around? Would a newer but old Airport Express be able to extend network to Sunflower? Or maybe a third party wireless (such as Netgear, Dlink, etc) that has browser type control rather than special utility?
Another question--before I used MAC addresses to control who could access network. Now on Time Capsule I don't see anything about this--so is it true now that the only access control is via WPA2 pwd now (which appears to be the encryption pwd and not the time capsule pwd)?

Is there a way to connect an old Sunflower iMac (OSX 10.4.11) to a new Time Capsule?
I can’t claim to completely grasp the issue(s) you’re describing, but the underlying problem is presumably your iMac’s obsolete AirPort card. Whatever the case, an obvious (if not particularly helpful) answer to your stated question would be to connect your iMac with an ethernet cable, using powerline adapters as an alternative if you don’t want to have wire running all over the place.
My still fully functional clamshell iBook, with an original AirPort card, connects wirelessly to my 4th Generation TC network by means of a cheap 802.11b/g/n USB Wi-Fi adapter. This might be an option for you too.
Another question--before I used MAC addresses to control who could access network. Now on Time Capsule I don't see anything about this
When you edit your TC's settings the access controls appear under the Network tab, don't they?

We have an iMac OSX Lion.I received a CD with photos on it by a friend of mine. She scanned the photos to her computer and gave the disk to me . I installed it yesterday. I can hear the disk spinning but no pictures come up. What would be the problem?

We have an iMac OSX Lion. I received a CD with photos on it from a friend of mine. My friend scanned the photos to her computer and gave the disc to me. I can hear the disc spinning but the pictures aren't coming up to view. Before having the iMac I had a Dell computer. I was able to view the photos at that time. Is there something I can do so I can view them on my iMac? Thank you.

The information I see in disk utility is the following: MacIntosh HD superdrive. 1TBST31000528A S Media

IMac OSX 10.5.8 Strange Boot Behavior

Hello All,
I've got an Issue with my 2007 Imac. I've been struggling with it for almost the entire day and night, and after trying every trick I've found online, I can't get anywhere. Incoming Wall-O-Text, apologies, but I want to be as detailed as I can.
So what happened before it all went down was... I was poking around trying to free up disk space, going through every major directory and analyzing its size. I poked around in a lot of hidden and system files, but I was very careful not to modify or delete any of these. The only files I deleted were in the following directories:
Note: I did not delete entire directory, just specific files I've named
/Applications/World of Warcraft/...
     I deleted some old patch files and installer files
/Users/my_username/Movies...
     I deleted some old video files
/Private/Var/Folders/Dy/Dy3Jj8iy2eE8iGh3ej/Tmp...
     There were two large Screenflow files here, I deleted them. Also deleted a handful of other small files. These small, obscurely named files are the only ones I'm worried I shouldn't have deleted. Might have been careless, but they were in a temp directory right?
Only other thing I did was give myself R/W permissions to some folders that were locked to me, for the purpose of checking their size. Some of these included the Spotlight directory and other system folders. But once again, no modifications done here except the permissions.
Shortly after strange things began happening. My Google Chrome Window turned to a white screen. I could press back, forward, refresh, but nothing appeared in the window. I closed Chrome. I started Itunes and it failed to open. I tried to open it again, same result: crashed, critical error, etc. I didn't pay much attention to the error message unfortunately. I decided to do a quick reboot...well my OS never booted back up.
It got stuck on the grey screen with the Apple logo with the little circle underneath it, thinking. And it just sits there, for about two minutes... and then screen flashes black and it restarts itself. Apple chord sound plays, and back to the grey screen with Apple logo and circle. For two minutes, then black again, Apple chord, etc. etc. etc.
The process continues to repeat by itself. I let the process run for almost an hour before I gave up on it fixing itself.
System Specs:
2007 Imac, OSX 10.5.8, 20inch, 2.4ghz core 2 duo, 1gb ram, 250gb hd
I have the Install DVD and system reads it fine.
Since then I've been scouring these forums and others, trying most solutions I've found, such as:
Holding 'D' for hardware check (comes back clean)
Running Disk Utility from boot DVD (Verify Permissions, Repair Permissions, Verify Disk, and Repair Disk: ALL come back clean)
Resetting PRAM (held for 4 dings)
Resetting the SMC
Verbose Mode (It loads and I get to see some text, but still hangs for two minutes and restarts)
Safe Mode will NOT work, system hangs at same spot like always then restarts
Single User Mode (Loads the text like Verbose. I ran fsck -fy a few times, didn't change anything. I'd like to explore more commands in this mode)
DiskWarrior (First time through, graph produced 34% errors or whatever. I did a repair and rebuild. It executed fine. I Graphed a second time, it came up with less than 1% errors. Repaired and Rebuilt again successfully. I even used the 'Scavenge' mode. After all of this, boot still hangs and restarts)
Drive Genius (I executed everything under the 'Repair' tool. Twice. Came back clean both times)
Tried booting with various configurations of USB devices plugged-in / not plugged in
After all this, The machine behaves exactly like it did when the problem first happened, no change.
Things I haven't tried:
Target disk mode with another Mac (Don't have access to one unless I go way out of my way)
Reset NVRAM? (Can't get it to work, it just hangs like normal)
Some advanced Scripting in Single User Mode (Since this mode seems to work for me, maybe I can get something working here)Saw on some other site "try booting with "-x -f -v" Not sure what these do or how to do them
I don't have a backup even remotely recent, shame on me.
The strange thing that seperates my case from most others I've seen, is that I'm not having any errors in my disk checks and cleanups. And my DVD reads just fine. Most people are coming with errors after installing updates, or they can't boot from DVD, or getting "unrecoverable disk" errors.
For me, everything supposedly is in working order, but obiously it isn't. I'm still failing to see the culprit here.
One interesting thing is that in both Single User Mode and Verbose Mode, the last lines I see before It hangs are
AppleYukon2: Marvel Yukon Gigabit Adapter 88E8055 Singleport Copper SA
AppleYukon2: RxRingSize <= 1024, TxRingSize 256, RX_MAX_LE 1024, TX_MAX_LE 768, ST_MAX_LE 3328
I've seen other threads where people have almost these exact lines in their startup before stalling. Someone mentioned the hang could have something to do with these lines...
OR
whatever lines come immediately after these.
OR
It could be something completely unrelated. Who knows.
Thats all I can think of right now, I'm exhausted. I'd appreciate any and all help. I can't afford to lose the data on this machine
Look forward to hearing from y'all
Thanks guys

duringnieux pierre wrote:
if you got an external drive , try install a system on it then boot from it ( in that way your internal drive act as an external drive , then you can backup your files )
Firstly IF I have an un-bootable install, why would it suddenly become bootable if I used it externally rather than internally?
Anyways I tried to Create Image from my Macintosh HD and save it to external, and got this error:
"Unable to Create: input/output error"
This happened twice. I am about to use a different external HD, one which also has more space.
And Klaus,
I did read through the links you supplied. In the first link there is a giant list of all the files the archive function backs up. It backs up a lot, but not quite everything. If it backed up everything, they could just say "everything".
The directory I'm concerned with is the /Applications one. It seems the only things backed up in this directory are specific Apple apps, for exapmple:
/Applications/Chess.app
/Applications/Clock.app
/Applications/DVD Player.app
/Applications/Extras/BlastApp.app
I have many many GB worth of other apps I'd love to be able to load back up, rather than spend hours re-installing them.
But I will try to use the Archive and Install feature though, once I have safely backed up my files. I found this on the Apple site also:
Archive and Install installations require the largest amount of available disk space because you need to have room to preserve your existing System and the new one you are installing
On my 250GB HD, my installation uses 200GB, and I only have about 40GB free. Will Archive and Install be able to work with this little space?
Thanks

How do I connect my Imac OSX 10.9.4 to my HP Laserjet IIIP printer ??

Hello,
I own a very old HP Laserjet IIIP printer which is still very good and I would like to install it on my Imac OSX 10.9.4.
Can you please help me to find the Drivers ?
Many thanks.
Giogio

Hi Giogio, and welcome to the HP Forums.
I am sorry to be the bearer of this news, but do the age of the printer, it is not supported by Mac OS X 10.9. I am including a list below of the supported printers from Apple:
OS X: Printer and scanner software available for download.
For more information, I would recommend contacting the Apple Support Communities.
Thank you for posting on the HP Forums.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Anyone know how to make an iMac, OSX 10.8.1, System Settings modifier file?

I am working on an iMac, OSX 10.8.1, and would like to have a file that, when it runs, sets the mouse tracking speed at 7 (assuming that the far left of the bar is 0), deselects 'natural scroll direction,' and, in Mission Control, deselects 'show dashboard as a space.' It needs to be something that can be run from a USB drive, as I will be using it on a computer system that resets itself daily. While I have some (basic, Windows and Fedora oriented) programming knowledge, I am unfamiliar with the Mac OS coding environment and scripting languages. Does anyone here know how to do this, or where I should look for someone who does?

^^EDIT^^
System admins updated iMac to OS X Mountain Lion (10.8.4).

My imac (osx 10.6.8), apple mail(4.5) has begun to act very odd. It quits out and on occasion I open an email to face "plugin is missing" or I have a spinning wheel and the email won't open. New to do list fails to add to the list. Can anyone help?

Hi all,
My imac (osx 10.6.8), apple mail(4.5) has begun to act very odd. It quits out and on occasion I open an email to face "plugin is missing" or I have a spinning wheel and the email won't open. New to do list fails to add to the list. Can anyone help?

Hi all,
My imac (osx 10.6.8), apple mail(4.5) has begun to act very odd. It quits out and on occasion I open an email to face "plugin is missing" or I have a spinning wheel and the email won't open. New to do list fails to add to the list. Can anyone help?

N80 - Equivalent of PC Suite to iMac OSx 10.5.2...

Similar Messages

Maybe you are looking for